- use warnx() to tell the user whether a process is running in normal,
idle or realtime priority. with the old code it would have been possible
for another process to send data to stdout between
printf("%s: ", p);
and
printf("* priority\n");
and thus break the formatting.
- 'rtprio 10 -0' triggeres non-intuitive behavior. It would first set the
priority of itself to 10 *and* would then try to execute '-0'. Of course,
setting the priority of [id|rt]prio itself doesn't make a lot of sense,
but it is intuitive compared to the previous behavior.
- 'rtprio -t --1' will actually pass over the '-1' to rtprio(). Now
invoking rtprio like this will catch the wrong usage before passing
over the invalid argument to rtprio().
- Garrett Cooper suggested to add further diagnostics where the failure
occures, if execvp fails.
PR: bin/154042
Submitted by: arundel
MFC after: 1 month
In an example of boot command:
- rename wd(4) IDE disk drives name to ad(4) for the time being.
- update the used kernel path "/kernel" to the current default.
[It still worked occasionally by looking into the /boot/kernel directory,
so the resulting path was "/boot//kernel/kernel", with two slashes.]
Bump .Dd for this and previous changes.
MFC after: 1 week
Vendor has integrated most of our local changes in revisions 3976-3979 so
future updates are going to be easier.
Thanks to Tim Kientzle <kientzle@FreeBSD.org>.
MFC after: 8 days
fortunes, but occasionally remove them from the other 2 files when
they are not offensive, or not murphy'ish enough.
Where the version in fortunes had better attribution and/or formatting,
copy it over.
2. Fix a few typos
3. Use the full name of François De La Rochefoucauld, fix one of his
quotes, and remove the duplicate of it.
- Make atomic_init() work for GCC, as assigning to structs doesn't work.
- Fix misplaced parenthesis in atomic_is_lock_free() for GCC.
- Make atomic_compare_exchange_strong() for GCC return the proper
boolean value, whether object == expected.
- Fix argument passing in atomic_exchange_explicit() for GCC.
This library implements the C11 threads interface on top of the pthreads
library. As discussed on the lists, the preferred way to implement
this, is as a separate library.
It is unlikely that these functions will be used a lot in the future. It
would have been easier if the C11 working group standardized (a subset
of) pthreads and clock_nanosleep(). Having it as a separate library
allows the embedded people to omit it from their system.
Discussed on: arch@, threads@
doing split software/hardware LED configuration, we can now simply
treat "softled" as an "output" mux type.
This works fine on this DWA-552. Previous generation (pre-11n NICs) don't
have a GPIO mux - only input/output configuration - so they ignore this
field.
The hardware (MAC) LED blinking involves a few things:
* Selecting which GPIO pins map to the MAC "power" and "network" lines;
* Configuring the MAC LED state (associated, scanning, idle);
* Configuring the MAC LED blinking type and speed.
The AR5416 HAL configures the normal blinking setup - ie, blink rate based
on TX/RX throughput. The default AR5212 HAL doesn't program in any
specific blinking type, but the default of 0 is the same.
This code introduces a few things:
* The hardware led override is configured via sysctl 'hardled';
* The MAC network and power LED GPIO lines can be set, or left at -1
if needed. This is intended to allow only one of the hardware MUX
entries to be configured (eg for PCIe cards which only have one LED
exposed.)
TODO:
* For AR2417, the software LED blinking involves software blinking the
Network LED. For the AR5416 and later, this can just be configured
as a GPIO output line. I'll chase that up with a subsequent commit.
* Add another software LED blink for "Link", separate from "activity",
which blinks based on the association state. This would make my
D-Link DWA-552 have consistent and useful LED behaviour (as they're
marked "Link" and "Activity."
* Don't expose the hardware LED override unless it's an AR5416 or later,
as the previous generation hardware doesn't have this multiplexing
setup.
Some of the NICs I have here power up with the LEDs blinking, which is
incorrect. The blinking should only occur when the NIC is attempting
to associate.
* On powerup, set the state to HAL_LED_INIT, which turns on the "Power" MAC
LED but leaves the "Network" MAC LED the way it is.
* On resume, also init it to HAL_LED_INIT unless in station mode, where
it's forced to HAL_LED_RUN. Hopefully the net80211 state machine will
call newstate() at some point, which will refiddle the LEDs.
I've tested this on a handful of 11n and pre-11n NICs. The blinking
behaviour is slightly more sensible now.
relying on what the register defaults are.
This forces the blink mode to be proportional to the TX and RX frames
which match the RX filter.
This (along with a few tweaks to if_ath_led.c to configure the correct
GPIO pins) allows my DWA-552 AR5416 NIC to blink the LEDs in a useful
fashion, however those LEDs are marked "Link" and "Act(ivity)", which
don't really map well to the "power" / "network" LED interface which
the MAC provides. Some further tinkering is needed to see what other
useful operating modes are possible.
Even though these header files make little sense to me, they are part of
the standard. By including these header files, you can simply use
`alignas', `alignof' and `noreturn' instead of the underscore-prefixed
versions.
kernel builds. All the instances of this warning in our tree are
completely harmless, and many people seem to like adding extra
parentheses to make precedence clearer.
MFC after: 1 week
