This avoids a bogus negative name cache entry from persisting forever
when another client creates an entry with the same name within the
same NFS server time of day clock tick. The mount option negnametimeo
can be used to override the default timeout interval on a
per-mount-point basis. Setting negnametimeo to 0 disables negative
name caching for the mount point.
I also fixed one obvious typo where args.timeo should be
args.maxgrouplist.
Submitted by: jhb (earlier version)
Reviewed by: jhb
MFC after: 2 weeks
libulog now only provides functions that are used by various packages
from the ports tree, namely the libutempter ones. There is no reason to
link it into the crunch/fixit binaries anymore.
longer than the length of the current attribute if the buffer were reused
and previously longer, so bits of the previous, longer attribute would be
written. Fix this by using the actual attribute length.
register from the PCB.
Remove a couple of misleading comments while I am here. The comments are
misleading because they imply that interrupts will be enabled after the
status register is restored from the PCB. This is not the case because
the processor is at the exception level (SR_EXL is set).
Approved by: imp (mentor)
and deactivate_device
- Save state before attaching driver and restore it when
detaching
- Clear CLK bit after last bit of byte has been sent over
the bus providing falling edge for last byte in transfer
- Fix several places where CS0 was always assumed
- Add $FreeBSD$ to ar71xxreg.h
compatibility level with the GNU counterparts and have shown to be mature
enough. For now, the GNU versions aren't removed from the tree, just detached
from the build.
Sponsored by: Google Summer of Code 2008
Portbuild run by: erwin
Approved by: delphij
frames to be accepted while the driver is resetting the hardware.
This failure is generally observed when broadcast frames are received
during driver load and will generate "Unable to write CTX memory"
errors.
- Small changes to driver flags display.
convert its value. [1]
- Set default tm_nodes_max to min(pages + 3, UINT32_MAX). It's more
reasonable than the old four nodes per page (with page size 4096) because
non-empty regular files always use at least one page. This fixes possible
overflow in the calculation. [2]
- Don't allow more than tm_nodes_max nodes allocated in tmpfs_alloc_node().
PR: kern/138367
Suggested by: bde [1], Gleb Kurtsou [2]
Approved by: trasz (mentor)
stopped and debugger may modify or drop the signal. After the changes to
keep process-targeted signals on the process sigqueue, another thread
may note the old signal on the queue and act before the thread removes
changed or dropped signal from the process queue. Since process is
traced, it usually gets stopped. Or, if the same signal is delivered
while process was stopped, the thread may erronously remove it,
intending to remove the original signal.
Remove the signal from the queue before notifying the debugger. Restore
the siginfo to the head of sigqueue when signal is allowed to be
delivered to the debugee, using newly introduced KSI_HEAD ksiginfo_t
flag. This preserves required order of delivery. Always restore the
unchanged signal on the curthread sigqueue, not to the process queue,
since the thread is about to get it anyway, because sigmask cannot be
changed.
Handle failure of reinserting the siginfo into the queue by falling
back to sq_kill method, calling sigqueue_add with NULL ksi.
If debugger changed the signal to be delivered, use sigqueue_add()
with NULL ksi instead of only setting sq_signals bit.
Reported by: Gardner Bell <gbell72 rogers com>
Analyzed and first version of fix by: Tijl Coosemans <tijl coosemans org>
PR: 142757
Reviewed by: davidxu
MFC after: 2 weeks
which stops to proceed further, as it is possible that processes which
fails to create PID file get screwed by rotation.
Requested by: stas
MFC after: 2 weeks
X-MFC with: r200806
It makes hardly any sense to expose a symbol which should only be
provided for binary compatibility, but it seems we don't have a lot of
choice here. There are many autoconf scripts out there that try to
create a binary that links against the old symbol to see whether
uname(3) is present. These scripts fail to detect uname(3) now.
It should be noted that the behaviour we implement is not against the
standards:
| The following shall be declared as a function and may also be defined
| as a macro:
|
| int uname(struct utsname *);
I must have misread when I ported the original last(1) source code.
Instead of only processing the last 1024 entries, it reads them in in
chucks of 1024 entries at a time.
Unfortunately we cannot walk through the log file in reverse order,
which means we have to allocate a piece of memory to hold all the
entries. Call realloc() for each 128 entries we read.
Reported by: Andrzej Tobola <ato iem pw edu pl>
file can safely be the same as the input file. Idea from IRIX unifdef(1).
This version fixes a bug in the NetBSD unifdef which refuses to
write to a -o outfile which does not exist.
Obtained from: NetBSD
Remove __gnu89_inline.
Now that we use C99 almost everywhere, just use C99-style in the pmap
code. Since the pmap code is the only consumer of __gnu89_inline, remove
it from cdefs.h as well. Because the flag was only introduced 17 months
ago, I don't expect any problems.
Reviewed by: alc
It was backed out, because it prevented us from building kernels using a
7.x compiler. Now that most people use 8.x, there is nothing that holds
us back. Even if people run 7.x, they should be able to build a kernel
if they run `make kernel-toolchain' or `make buildworld' first.
