Commit Graph

114 Commits

Author SHA1 Message Date
Konstantin Belousov
a546448b8d Rewrite amd64 PCID implementation to follow an algorithm described in
the Vahalia' "Unix Internals" section 15.12 "Other TLB Consistency
Algorithms".  The same algorithm is already utilized by the MIPS pmap
to handle ASIDs.

The PCID for the address space is now allocated per-cpu during context
switch to the thread using pmap, when no PCID on the cpu was ever
allocated, or the current PCID is invalidated.  If the PCID is reused,
bit 63 of %cr3 can be set to avoid TLB flush.

Each cpu has PCID' algorithm generation count, which is saved in the
pmap pcpu block when pcpu PCID is allocated.  On invalidation, the
pmap generation count is zeroed, which signals the context switch code
that already allocated PCID is no longer valid.  The implication is
the TLB shootdown for the given cpu/address space, due to the
allocation of new PCID.

The pm_save mask is no longer has to be tracked, which (significantly)
reduces the targets of the TLB shootdown IPIs.  Previously, pm_save
was reset only on pmap_invalidate_all(), which made it accumulate the
cpuids of all processors on which the thread was scheduled between
full TLB shootdowns.

Besides reducing the amount of TLB shootdowns and removing atomics to
update pm_saves in the context switch code, the algorithm is much
simpler than the maintanence of pm_save and selection of the right
address space in the shootdown IPI handler.

Reviewed by:	alc
Tested by:	pho
Sponsored by:	The FreeBSD Foundation
MFC after:	3 weeks
2015-05-09 19:11:01 +00:00
Konstantin Belousov
b57a73f8e7 If x86 CPU implementation of the MWAIT instruction reasonably
interacts with interrupts, query ACPI and use MWAIT for entrance into
Cx sleep states.  Support C1 "I/O then halt" mode.  See Intel'
document 302223-007 "Intelб╝ Processor Vendor-Specific ACPI Interface
Specification" for description.

Move the acpi_cpu_c1() function into x86/cpu_machdep.c and use
it instead of inlining "sti; hlt" sequence in several places.

In the acpi(4) man page, besides documenting the dev.cpu.N.cx_methods
sysctl, correct the names for dev.cpu.N.{cx_usage,cx_lowest,cx_supported}
sysctls.

Both jkim and avg have some other patches implementing the mwait
functionality; this work is unrelated.  Linux does not rely on the
ACPI to provide correct tables describing Cx modes.  Instead, the
driver has pre-defined knowledge of the CPU models, it was supplied by
Intel.

Tested by:    pho (previous versions)
Sponsored by:	The FreeBSD Foundation
2015-05-09 12:28:48 +00:00
Neel Natu
712bd51ada Add macros for AMD-specific bits in MSR_EFER: LMSLE, FFXSR and TCE.
AMDID_FFXSR is at bit 25 so correct its value to 0x02000000.

MFC after:	1 week
2015-05-06 05:12:29 +00:00
John Baldwin
ed95805e90 Remove support for Xen PV domU kernels. Support for HVM domU kernels
remains.  Xen is planning to phase out support for PV upstream since it
is harder to maintain and has more overhead.  Modern x86 CPUs include
virtualization extensions that support HVM guests instead of PV guests.
In addition, the PV code was i386 only and not as well maintained recently
as the HVM code.
- Remove the i386-only NATIVE option that was used to disable certain
  components for PV kernels.  These components are now standard as they
  are on amd64.
- Remove !XENHVM bits from PV drivers.
- Remove various shims required for XEN (e.g. PT_UPDATES_FLUSH, LOAD_CR3,
  etc.)
- Remove duplicate copy of <xen/features.h>.
- Remove unused, i386-only xenstored.h.

Differential Revision:	https://reviews.freebsd.org/D2362
Reviewed by:	royger
Tested by:	royger (i386/amd64 HVM domU and amd64 PVH dom0)
Relnotes:	yes
2015-04-30 15:48:48 +00:00
Wei Hu
da2f98a1cf Microsoft vmbus, storage and other related driver enhancements for HyperV.
- Vmbus multi channel support.
    - Vector interrupt support.
    - Signal optimization.
    - Storvsc driver performance improvement.
    - Scatter and gather support for storvsc driver.
    - Minor bug fix for KVP driver.
Thanks royger, jhb and delphij from FreeBSD community for the reviews
and comments. Also thanks Hovy Xu from NetApp for the contributions to
the storvsc driver.

PR:     195238
Submitted by:   whu
Reviewed by:    royger, jhb, delphij
Approved by:    royger
MFC after:      2 weeks
Relnotes:       yes
Sponsored by:   Microsoft OSTC
2015-04-29 10:12:34 +00:00
John Baldwin
179fa75e6e Reassign copyright statements on several files from Advanced
Computing Technologies LLC to Hudson River Trading LLC.

Approved by:	Hudson River Trading LLC (who owns ACT LLC)
MFC after:	1 week
2015-04-23 14:22:20 +00:00
Konstantin Belousov
9dda94167d Revert unrelated chunk from the r281707.
MFC after:	2 weeks
2015-04-18 21:27:28 +00:00
Konstantin Belousov
1c8e7232b4 Remove lazy pmap switch code from i386. Naive benchmark with md(4)
shows no difference with the code removed.

On both amd64 and i386, assert that a released pmap is not active.

Proposed and reviewed by:	alc
Discussed with:	Svatopluk Kraus <onwahe@gmail.com>, peter
Sponsored by:	The FreeBSD Foundation
MFC after:	2 weeks
2015-04-18 21:23:16 +00:00
John Baldwin
dbee5c671a Move the 32-bit compatible procfs types from freebsd32.h to <sys/procfs.h>
and export them to userland.
- Define __HAVE_REG32 on platforms that define a reg32 structure and check
  for this in <sys/procfs.h> to control when to export prstatus32, etc.
- Add prstatus32_t and prpsinfo32_t typedefs for the 32-bit structures.
  libbfd looks for these types, and having them fixes 'gcore' in gdb of a
  32-bit process on a 64-bit platform.
- Use the structure definitions from <sys/procfs.h> in gcore's elf32 core
  dump code instead of duplicating the definitions.

Differential Revision:	https://reviews.freebsd.org/D2142
Reviewed by:	kib, nathanw (powerpc bits)
MFC after:	1 week
2015-04-08 16:30:45 +00:00
Konstantin Belousov
0a110d5b17 Use VT-d interrupt remapping block (IR) to perform FSB messages
translation.  In particular, despite IO-APICs only take 8bit apic id,
IR translation structures accept 32bit APIC Id, which allows x2APIC
mode to function properly.  Extend msi_cpu of struct msi_intrsrc and
io_cpu of ioapic_intsrc to full int from one byte.

KPI of IR is isolated into the x86/iommu/iommu_intrmap.h, to avoid
bringing all dmar headers into interrupt code. The non-PCI(e) devices
which generate message interrupts on FSB require special handling. The
HPET FSB interrupts are remapped, while DMAR interrupts are not.

For each msi and ioapic interrupt source, the iommu cookie is added,
which is in fact index of the IRE (interrupt remap entry) in the IR
table. Cookie is made at the source allocation time, and then used at
the map time to fill both IRE and device registers. The MSI
address/data registers and IO-APIC redirection registers are
programmed with the special values which are recognized by IR and used
to restore the IRE index, to find proper delivery mode and target.
Map all MSI interrupts in the block when msi_map() is called.

Since an interrupt source setup and dismantle code are done in the
non-sleepable context, flushing interrupt entries cache in the IR
hardware, which is done async and ideally waits for the interrupt,
requires busy-wait for queue to drain.  The dmar_qi_wait_for_seq() is
modified to take a boolean argument requesting busy-wait for the
written sequence number instead of waiting for interrupt.

Some interrupts are configured before IR is initialized, e.g. ACPI
SCI.  Add intr_reprogram() function to reprogram all already
configured interrupts, and call it immediately before an IR unit is
enabled.  There is still a small window after the IO-APIC redirection
entry is reprogrammed with cookie but before the unit is enabled, but
to fix this properly, IR must be started much earlier.

Add workarounds for 5500 and X58 northbridges, some revisions of which
have severe flaws in handling IR.  Use the same identification methods
as employed by Linux.

Review:	https://reviews.freebsd.org/D1892
Reviewed by:	neel
Discussed with:	jhb
Tested by:	glebius, pho (previous versions)
Sponsored by:	The FreeBSD Foundation
MFC after:	3 weeks
2015-03-19 13:57:47 +00:00
Neel Natu
8958d18cb3 Add x86 specific APIs 'lapic_ipi_alloc()' and 'lapic_ipi_free()' to allow IPI
vectors to be dynamically allocated. This allows kernel modules like vmm.ko
to allocate unique IPI slots when loaded (as opposed to hard allocating one
or more vectors).

Also, reorganize the fixed IPI vectors to create a contiguous space for
dynamic IPI allocation.

Reviewed by:	kib, jhb
Differential Revision:	https://reviews.freebsd.org/D2042
2015-03-14 00:30:41 +00:00
Neel Natu
847383d090 Free up the IPI slot used by IPI_STOP_HARD.
Change the numeric value of IPI_STOP_HARD so it doesn't occupy a valid IPI
slot. This can be done because IPI_STOP_HARD is actually delivered via NMI.

Reviewed by:	kib
Differential Revision:	https://reviews.freebsd.org/D1983
2015-03-01 02:31:27 +00:00
Konstantin Belousov
2d4c4c8dc7 Implements EOI suppression mode, where LAPIC on EOI command for
level-triggered interrupt does not broadcast the EOI message to all
APICs in the system.  Instead, interrupt handler must follow LAPIC EOI
with IOAPIC EOI.  For modern IOAPICs, the later is done by writing to
EOIR register.  Otherwise, Intel provided Linux with a trick of
temporary switching the pin config to edge and then back to level.

Detect presence of EOIR register by reading IO-APIC version.  The
summary table in the comments was taken from the Linux kernel.  For
Intel, newer IO-APICs are only briefly documented as part of the
ICH/PCH datasheet.  According to the BKDG and chipset documentation,
AMD LAPICs do not provide EOI suppression, althought IO-APICs do
declare version 0x21 and implement EOIR.

The trick to temporary switch pin to edge mode to clear IRR was tested
on modern chipset, by pretending that EOIR is not present, i.e. by
forcing io_haseoi to zero.

Tunable hw.lapic_eoi_suppression disables the optimization.

Reviewed by:	neel
Tested by:	pho
Review:	https://reviews.freebsd.org/D1943
Sponsored by:	The FreeBSD Foundation
MFC after:	2 months
2015-02-26 11:02:40 +00:00
Konstantin Belousov
738a5a4f41 Detect whether x2APIC on VMWare is usable without interrupt
redirection support.  Older versions of the hypervisor mis-interpret
the cpuid format in ioapic registers when x2APIC is turned on, but IR
is not used by the guest OS.

Based on:	Linux commit 4cca6ea04d31c22a7d0436949c072b27bde41f86
Tested by:	markj
Sponsored by:	The FreeBSD Foundation
MFC after:	2 months
2015-02-14 09:00:12 +00:00
Konstantin Belousov
4c918926cd Add x2APIC support. Enable it by default if CPU is capable. The
hw.x2apic_enable tunable allows disabling it from the loader prompt.

To closely repeat effects of the uncached memory ops when accessing
registers in the xAPIC mode, the x2APIC writes to MSRs are preceeded
by mfence, except for the EOI notifications.  This is probably too
strict, only ICR writes to send IPI require serialization to ensure
that other CPUs see the previous actions when IPI is delivered.  This
may be changed later.

In vmm justreturn IPI handler, call doreti_iret instead of doing iretd
inline, to handle corner conditions.

Note that the patch only switches LAPICs into x2APIC mode. It does not
enables FreeBSD to support > 255 CPUs, which requires parsing x2APIC
MADT entries and doing interrupts remapping, but is the required step
on the way.

Reviewed by:	neel
Tested by:	pho (real hardware), neel (on bhyve)
Discussed with:	jhb, grehan
Sponsored by:	The FreeBSD Foundation
MFC after:	2 months
2015-02-09 21:00:56 +00:00
Bryan Venteicher
4025433eb2 Add interface to derive a TSC frequency from the pvclock
This can later use this to determine the TSC frequency like is done with
VMware, instead of using a DELAY loop that is not always accurate in an VM.

MFC after:	1 month
2015-02-04 08:33:04 +00:00
Bryan Venteicher
d3ccddf3ce Generalized parts of the XEN timer code into a generic pvclock
KVM clock shares the same data structures between the guest and the host
as Xen so it makes sense to just have a single copy of this code.

Differential Revision: https://reviews.freebsd.org/D1429
Reviewed by:	royger (eariler version)
MFC after:	1 month
2015-02-04 08:26:43 +00:00
Sean Bruno
e31b1dc894 Update Features2 to display SDBG capability of processor. This is
showing up on Haswell-class CPUs

From the Intel SDM, "Table 3-20. Feature Information Returned in the
ECX Register"

11 | SDBG | A value of 1 indicates the processor supports
IA32_DEBUG_INTERFACE MSR for silicon debug.

Submitted by:	jiashiun@gmail.com
Reviewed by:	jhb neel
MFC after:	2 weeks
2015-01-08 16:50:35 +00:00
Mark Johnston
bdb9ab0dd9 Factor out duplicated code from dumpsys() on each architecture into generic
code in sys/kern/kern_dump.c. Most dumpsys() implementations are nearly
identical and simply redefine a number of constants and helper subroutines;
a generic implementation will make it easier to implement features around
kernel core dumps. This change does not alter any minidump code and should
have no functional impact.

PR:		193873
Differential Revision:	https://reviews.freebsd.org/D904
Submitted by:	Conrad Meyer <conrad.meyer@isilon.com>
Reviewed by:	jhibbits (earlier version)
Sponsored by:	EMC / Isilon Storage Division
2015-01-07 01:01:39 +00:00
John Baldwin
180e57e5c7 Improve support for XSAVE with debuggers.
- Dump an NT_X86_XSTATE note if XSAVE is in use. This note is designed
  to match what Linux does in that 1) it dumps the entire XSAVE area
  including the fxsave state, and 2) it stashes a copy of the current
  xsave mask in the unused padding between the fxsave state and the
  xstate header at the same location used by Linux.
- Teach readelf() to recognize NT_X86_XSTATE notes.
- Change PT_GET/SETXSTATE to take the entire XSAVE state instead of
  only the extra portion. This avoids having to always make two
  ptrace() calls to get or set the full XSAVE state.
- Add a PT_GET_XSTATE_INFO which returns the length of the current
  XSTATE save area (so the size of the buffer needed for PT_GETXSTATE)
  and the current XSAVE mask (%xcr0).

Differential Revision:	https://reviews.freebsd.org/D1193
Reviewed by:	kib
MFC after:	2 weeks
2014-11-21 20:53:17 +00:00
John Baldwin
01e1933dcc Rework virtual machine hypervisor detection.
- Move the existing code to x86/x86/identcpu.c since it is x86-specific.
- If the CPUID2_HV flag is set, assume a hypervisor is present and query
  the 0x40000000 leaf to determine the hypervisor vendor ID.  Export the
  vendor ID and the highest supported hypervisor CPUID leaf via
  hv_vendor[] and hv_high variables, respectively.  The hv_vendor[]
  array is also exported via the hw.hv_vendor sysctl.
- Merge the VMWare detection code from tsc.c into the new probe in
  identcpu.c.  Add a VM_GUEST_VMWARE to identify vmware and use that in
  the TSC code to identify VMWare.

Differential Revision:	https://reviews.freebsd.org/D1010
Reviewed by:	delphij, jkim, neel
2014-10-28 19:17:44 +00:00
Neel Natu
e011dc962c Merge from projects/bhyve_svm all the changes outside vmm.ko or bhyve utilities:
Add support for AMD's nested page tables in pmap.c:
- Provide the correct bit mask for various bit fields in a PTE (e.g. valid bit)
  for a pmap of type PT_RVI.
- Add a function 'pmap_type_guest(pmap)' that returns TRUE if the pmap is of
  type PT_EPT or PT_RVI.

Add CPU_SET_ATOMIC_ACQ(num, cpuset):
This is used when activating a vcpu in the nested pmap. Using the 'acquire'
variant guarantees that the load of the 'pm_eptgen' will happen only after
the vcpu is activated in 'pm_active'.

Add defines for various AMD-specific MSRs.

Submitted by:	Anish Gupta (akgupt3@gmail.com)
2014-10-20 18:09:33 +00:00
Neel Natu
5295c3e61d Support Intel-specific MSRs that are accessed when booting up a linux in bhyve:
- MSR_PLATFORM_INFO
- MSR_TURBO_RATIO_LIMITx
- MSR_RAPL_POWER_UNIT

Reviewed by:	grehan
MFC after:	1 week
2014-10-09 19:13:33 +00:00
Roger Pau Monné
44e06d158a msi: add Xen MSI implementation
This patch adds support for MSI interrupts when running on Xen. Apart
from adding the Xen related code needed in order to register MSI
interrupts this patch also makes the msi_init function a hook in
init_ops, so different MSI implementations can have different
initialization functions.

Sponsored by: Citrix Systems R&D

xen/interface/physdev.h:
 - Add the MAP_PIRQ_TYPE_MULTI_MSI to map multi-vector MSI to the Xen
   public interface.

x86/include/init.h:
 - Add a hook for setting custom msi_init methods.

amd64/amd64/machdep.c:
i386/i386/machdep.c:
 - Set the default msi_init hook to point to the native MSI
   initialization method.

x86/xen/pv.c:
 - Set the Xen MSI init hook when running as a Xen guest.

x86/x86/local_apic.c:
 - Call the msi_init hook instead of directly calling msi_init.

xen/xen_intr.h:
x86/xen/xen_intr.c:
 - Introduce support for registering/releasing MSI interrupts with
   Xen.
 - The MSI interrupts will use the same PIC as the IO APIC interrupts.

xen/xen_msi.h:
x86/xen/xen_msi.c:
 - Introduce a Xen MSI implementation.

x86/xen/xen_nexus.c:
 - Overwrite the default MSI hooks in the Xen Nexus to use the Xen MSI
   implementation.

x86/xen/xen_pci.c:
 - Introduce a Xen specific PCI bus that inherits from the ACPI PCI
   bus and overwrites the native MSI methods.
 - This is needed because when running under Xen the MSI messages used
   to configure MSI interrupts on PCI devices are written by Xen
   itself.

dev/acpica/acpi_pci.c:
 - Lower the quality of the ACPI PCI bus so the newly introduced Xen
   PCI bus can take over when needed.

conf/files.i386:
conf/files.amd64:
 - Add the newly created files to the build process.
2014-09-30 16:46:45 +00:00
Neel Natu
c3498942a5 Restructure the MSR handling so it is entirely handled by processor-specific
code. There are only a handful of MSRs common between the two so there isn't
too much duplicate functionality.

The VT-x code has the following types of MSRs:

- MSRs that are unconditionally saved/restored on every guest/host context
  switch (e.g., MSR_GSBASE).

- MSRs that are restored to guest values on entry to vmx_run() and saved
  before returning. This is an optimization for MSRs that are not used in
  host kernel context (e.g., MSR_KGSBASE).

- MSRs that are emulated and every access by the guest causes a trap into
  the hypervisor (e.g., MSR_IA32_MISC_ENABLE).

Reviewed by:	grehan
2014-09-20 02:35:21 +00:00
Konstantin Belousov
27d21b9e9a Add a define for index of IA32_XSS MSR, which is, per SDM rev. 50, an
analog of XCR0 for ring 0 FPU state, used by XSAVES and XRSTORS.

Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
2014-09-06 19:47:37 +00:00
Konstantin Belousov
f3f509767a SDM rev. 50 defines the use of the next 8 bytes in the xstate header.
It is the compaction bitmask, with the highest bit defining if compact
format of the xsave area is used at all.

Adjust the definition of struct xstate_hdr, provide define for bit 63.

Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
2014-09-06 19:39:12 +00:00
Konstantin Belousov
dc7c2b07da Add more bits for the XSAVE features from CPUID 0xd, sub-function 1
%eax report.

Print the XSAVE features 0xd/1 in the boot banner.  The printcpuinfo()
is executed late enough so that XSAVE is already enabled.

There is no known to me off the shelf hardware that implements any
feature bits except XSAVEOPT, the list is taken from SDM rev. 50.  The
banner printing will allow us to note the hardware arrival.

Sponsored by:	    The FreeBSD Foundation
MFC after:	    1 week
2014-09-06 15:45:45 +00:00
Roger Pau Monné
c2641d23e1 xen: add ACPI bus to xen_nexus when running as Dom0
Also disable a couple of ACPI devices that are not usable under Dom0.
To this end a couple of booleans are added that allow disabling ACPI
specific devices.

Sponsored by: Citrix Systems R&D
Reviewed by: jhb

x86/xen/xen_nexus.c:
 - Return BUS_PROBE_SPECIFIC in the Xen Nexus attachement routine to
   force the usage of the Xen Nexus.
 - Attach the ACPI bus when running as Dom0.

dev/acpica/acpi_cpu.c:
dev/acpica/acpi_hpet.c:
dev/acpica/acpi_timer.c
 - Add a variable that gates the addition of the devices.

x86/include/init.h:
 - Declare variables that control the attachment of ACPI cpu, hpet and
   timer devices.
2014-08-04 09:05:28 +00:00
Roger Pau Monné
f48223fad2 x86/madt: make the interrupt override parser a public function
Split a portion of the code in madt_parse_interrupt_override to a
separate function, that is public and can be used from other code.
This will be needed by the Xen port, since FreeBSD needs to parse the
interrupt overrides and notify Xen about them.

This commit should not introduce any functional change.

Sponsored by: Citrix Systems R&D
Reviewed by: jhb, gibbs

x86/acpica/madt.c:
 - Introduce madt_parse_interrupt_values() that parses the intr
   information from ACPI and returns the triggering and the polarity.
   This is a subset of the functionality that used to be part of
   madt_parse_interrupt_override().
 - Make madt_found_sci_override a global variable that can be used
   from other files.

x86/include/acpica_machdep.h:
 - Prototype of madt_parse_interrupt_values.
 - Extern declaration of madt_found_sci_override.
2014-08-04 08:58:50 +00:00
John Baldwin
06fc6db948 - Output a summary of optional VT-x features in dmesg similar to CPU
features.  If bootverbose is enabled, a detailed list is provided;
  otherwise, a single-line summary is displayed.
- Add read-only sysctls for optional VT-x capabilities used by bhyve
  under a new hw.vmm.vmx.cap node. Move a few exiting sysctls that
  indicate the presence of optional capabilities under this node.

CR:		https://phabric.freebsd.org/D498
Reviewed by:	grehan, neel
MFC after:	1 week
2014-07-30 00:00:12 +00:00
Marcel Moolenaar
e7d939bda2 Remove ia64.
This includes:
o   All directories named *ia64*
o   All files named *ia64*
o   All ia64-specific code guarded by __ia64__
o   All ia64-specific makefile logic
o   Mention of ia64 in comments and documentation

This excludes:
o   Everything under contrib/
o   Everything under crypto/
o   sys/xen/interface
o   sys/sys/elf_common.h

Discussed at: BSDcan
2014-07-07 00:27:09 +00:00
Roger Pau Monné
ef409ede7b amd64/i386: introduce APIC hooks for different APIC implementations.
This is needed for Xen PV(H) guests, since there's no hardware lapic
available on this kind of domains. This commit should not change
functionality.

Sponsored by: Citrix Systems R&D
Reviewed by: jhb
Approved by: gibbs

amd64/include/cpu.h:
amd64/amd64/mp_machdep.c:
i386/include/cpu.h:
i386/i386/mp_machdep.c:
 - Remove lapic_ipi_vectored hook from cpu_ops, since it's now
   implemented in the lapic hooks.

amd64/amd64/mp_machdep.c:
i386/i386/mp_machdep.c:
 - Use lapic_ipi_vectored directly, since it's now an inline function
   that will call the appropiate hook.

x86/x86/local_apic.c:
 - Prefix bare metal public lapic functions with native_ and mark them
   as static.
 - Define default implementation of apic_ops.

x86/include/apicvar.h:
 - Declare the apic_ops structure and create inline functions to
   access the hooks, so the change is transparent to existing users of
   the lapic_ functions.

x86/xen/hvm.c:
 - Switch to use the new apic_ops.
2014-06-16 08:43:03 +00:00
John Baldwin
d8d025897e Whitespace fix.
Submitted by:	kib
2014-05-22 18:13:17 +00:00
John Baldwin
355d8a2f91 Add definitions for more structured extended features as well as
XSAVE Extended Features for AVX512 and MPX (Memory Protection Extensions).

Obtained from:	Intel's Instruction Set Extensions Programming Reference
                (March 2014)
2014-05-16 17:45:09 +00:00
Tijl Coosemans
0a4c54d606 Rename __wchar_t so it no longer conflicts with __wchar_t from clang 3.4
-fms-extensions.

MFC after:	2 weeks
2014-04-01 14:46:11 +00:00
Ed Maste
0fcefb433d Update NetBSD Foundation copyrights to 2-clause BSD
The NetBSD Foundation states "Third parties are encouraged to change the
license on any files which have a 4-clause license contributed to the
NetBSD Foundation to a 2-clause license."

This change removes clauses 3 and 4 from copyright / license blocks that
list The NetBSD Foundation as the only copyright holder.

Sponsored by:	The FreeBSD Foundation
2014-03-18 01:40:25 +00:00
Roger Pau Monné
079f7ef839 xen: add a hook to perform AP startup
AP startup on PVH follows the PV method, so we need to add a hook in
order to diverge from bare metal.

Approved by: gibbs
Sponsored by: Citrix Systems R&D

amd64/amd64/machdep.c:
 - Add hook for start_all_aps on native (using native_start_all_aps
   defined in mp_machdep).

amd64/amd64/mp_machdep.c:
 - Make some variables global because they will also be used by the
   Xen PVH AP startup code.
 - Use the start_all_aps hook to start APs.
 - Rename start_all_aps to native_start_all_aps.

amd64/include/smp.h:
 - Add declaration for native_start_all_aps.

x86/include/init.h:
 - Declare start_all_aps hook in init_ops.

x86/xen/pv.c:
 - Pick external declarations from mp_machdep.
 - Introduce Xen PV code to start APs on PVH.
 - Set start_all_aps init hook to use the Xen PVH implementation.
2014-03-11 10:27:57 +00:00
Roger Pau Monné
5a036d7e02 xen: add hook for AP bootstrap memory reservation
This hook will only be implemented for bare metal, Xen doesn't require
any bootstrap code since APs are started in long mode with paging
enabled.

Approved by: gibbs
Sponsored by: Citrix Systems R&D

amd64/amd64/machdep.c:
 - Set mp_bootaddress hook for bare metal.

x86/include/init.h:
 - Define mp_bootaddress in init_ops.
2014-03-11 10:26:16 +00:00
Roger Pau Monné
1e69553ed1 xen: implement hook to fetch and parse e820 memory map
e820 memory map is fetched using a hypercall under Xen PVH, so add a
hook to init_ops in oder to diverge from bare metal and implement a
Xen variant.

Approved by: gibbs
Sponsored by: Citrix Systems R&D

x86/include/init.h:
 - Add a parse_memmap hook to init_ops, that will be called to fetch
   and parse the memory map.

amd64/amd64/machdep.c:
 - Decouple the fetch and the parse of the memmap, so the parse
   function can be shared with Xen code.
 - Move code around in order to implement the parse_memmap hook.

amd64/include/pc/bios.h:
 - Declare bios_add_smap_entries (implemented in machdep.c).

x86/xen/pv.c:
 - Implement fetching of e820 memmap when running as a PVH guest by
   using the XENMEM_memory_map hypercall.
2014-03-11 10:23:03 +00:00
Roger Pau Monné
5f05c79450 xen: implement an early timer for Xen PVH
When running as a PVH guest, there's no emulated i8254, so we need to
use the Xen PV timer as the early source for DELAY. This change allows
for different implementations of the early DELAY function and
implements a Xen variant for it.

Approved by: gibbs
Sponsored by: Citrix Systems R&D

dev/xen/timer/timer.c:
dev/xen/timer/timer.h:
 - Implement Xen early delay functions using the PV timer and declare
   them.

x86/include/init.h:
 - Add hooks for early clock source initialization and early delay
   functions.

i386/i386/machdep.c:
pc98/pc98/machdep.c:
amd64/amd64/machdep.c:
 - Set early delay hooks to use the i8254 on bare metal.
 - Use clock_init (that will in turn make use of init_ops) to
   initialize the early clock source.

amd64/include/clock.h:
i386/include/clock.h:
 - Declare i8254_delay and clock_init.

i386/xen/clock.c:
 - Rename DELAY to i8254_delay.

x86/isa/clock.c:
 - Introduce clock_init that will take care of initializing the early
   clock by making use of the init_ops hooks.
 - Move non ISA related delay functions to the newly introduced delay
   file.

x86/x86/delay.c:
 - Add moved delay related functions.
 - Implement generic DELAY function that will use the init_ops hooks.

x86/xen/pv.c:
 - Set PVH hooks for the early delay related functions in init_ops.

conf/files.amd64:
conf/files.i386:
conf/files.pc98:
 - Add delay.c to the kernel build.
2014-03-11 10:20:42 +00:00
Roger Pau Monné
97baeefd5b amd64: introduce hook for custom preload metadata parsers
Add hooks to amd64 in order to have diverging implementations, since
on Xen PV the metadata is passed to the kernel in a different form.

Approbed by: gibbs
Sponsored by: Citrix Systems R&D

amd64/amd64/machdep.c:
 - Define init_ops for native.
 - Put native code inside of native_parse_preload_data hook.
 - Call the parse_preload_data in order to fill the metadata info.

x86/include/init.h:
 - Declare the init_ops struct.

x86/xen/pv.c:
 - Declare xen_init_ops that contains the Xen PV implementation of
   init_ops.
 - Implement the parse_preload_data for Xen PVH, the info is fetched
   from HYPERVISOR_start_info->cmd_line as provided by Xen.
2014-03-11 10:15:25 +00:00
John Baldwin
4edef187b8 Add support for managing PCI bus numbers. As with BARs and PCI-PCI bridge
I/O windows, the default is to preserve the firmware-assigned resources.
PCI bus numbers are only managed if NEW_PCIB is enabled and the architecture
defines a PCI_RES_BUS resource type.
- Add a helper API to create top-level PCI bus resource managers for each
  PCI domain/segment.  Host-PCI bridge drivers use this API to allocate
  bus numbers from their associated domain.
- Change the PCI bus and CardBus drivers to allocate a bus resource for
  their bus number from the parent PCI bridge device.
- Change the PCI-PCI and PCI-CardBus bridge drivers to allocate the
  full range of bus numbers from secbus to subbus from their parent bridge.
  The drivers also always program their primary bus register.  The bridge
  drivers also support growing their bus range by extending the bus resource
  and updating subbus to match the larger range.
- Add support for managing PCI bus resources to the Host-PCI bridge drivers
  used for amd64 and i386 (acpi_pcib, mptable_pcib, legacy_pcib, and qpi_pcib).
- Define a PCI_RES_BUS resource type for amd64 and i386.

Reviewed by:	imp
MFC after:	1 month
2014-02-12 04:30:37 +00:00
John Baldwin
e432d5f6a7 Drop the 3rd clause from all 3 clause BSD licenses where I am the sole
holder to convert them to 2 clause BSD licenses.

MFC after:	1 week
2014-02-05 18:13:27 +00:00
Tijl Coosemans
b35ac06804 Rename the AMD MSR_PERFCTR[0-3] so the Pentium Pro MSR_PERFCTR[0-1]
aren't redefined.

Reported by:	"Trivedi, Nishank" <Nishank.Trivedi@netapp.com>
Discussed with:	kib
2014-01-31 14:29:34 +00:00
John Baldwin
e07ef9b0f6 Move <machine/apicvar.h> to <x86/apicvar.h>. 2014-01-23 20:10:22 +00:00
John Baldwin
84ca9aad53 - Reuse legacy_pcib_(read|write)_config() methods in the QPI pcib driver.
- Reuse legacy_pcib_alloc_msi{,x}() methods in the QPI and mptable pcib
  drivers.
2014-01-21 03:14:19 +00:00
Nathan Whitehorn
dcd08302e5 Retire machine/fdt.h as a header used by MI code, as its function is now
obsolete. This involves the following pieces:
- Remove it entirely on PowerPC, where it is not used by MD code either
- Remove all references to machine/fdt.h in non-architecture-specific code
  (aside from uart_cpu_fdt.c, shared by ARM and MIPS, and so is somewhat
  non-arch-specific).
- Fix code relying on header pollution from machine/fdt.h includes
- Legacy fdtbus.c (still used on x86 FDT systems) now passes resource
  requests to its parent (nexus). This allows x86 FDT devices to allocate
  both memory and IO requests and removes the last notionally MI use of
  fdtbus_bs_tag.
- On those architectures that retain a machine/fdt.h, unused bits like
  FDT_MAP_IRQ and FDT_INTR_MAX have been removed.
2014-01-05 18:46:58 +00:00
John Baldwin
b2b76a45bf Use fixed-width types for all fields in MP Table structures and pack
all the structures.  While here, move a helper struct only used in
the kernel parser out of this header since it is not part of the MP
specification itself.
2013-12-11 21:19:04 +00:00
John Baldwin
316032ad20 Move constants for indices in the local APIC's local vector table from
apicvar.h to apicreg.h.
2013-12-09 21:08:52 +00:00