Commit Graph

145 Commits

Author SHA1 Message Date
Gleb Smirnoff
eb1b1807af Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags within sys.

Exceptions:

- sys/contrib not touched
- sys/mbuf.h edited manually
2012-12-05 08:04:20 +00:00
Juli Mallett
85129b4bd4 Use bootverbose to control debug printfs from the Cavium Simple Executive
code.  Also remove an unnecessary CVMX_ENABLE_DEBUG_PRINTS conditional around
what is already a cvmx_dprintf.
2012-11-24 02:12:24 +00:00
Juli Mallett
01a310bd57 o) Add support for specifying a model of Octeon to target at compile-time,
reducing the number of runtime checks done by the SDK code.
o) Group board/CPU information at early startup by subject matter, so that e.g.
   CPU information is adjacent to CPU information and board information is
   adjacent to board information.
2012-11-24 02:00:29 +00:00
Juli Mallett
fcd5eed4f0 Prevent hang on ATCA-7220 when transmitting packets < 60 bytes. 2012-11-19 08:30:29 +00:00
Juli Mallett
d0ebf478da Remove redundant printf of SDK version which already appears earlier in boot. 2012-11-19 08:29:53 +00:00
Juli Mallett
8aff4e5fdd Add basic support for the Radisys-specific PCI console mechanism found on the
Radisys ATCA-7220.
2012-11-19 01:58:20 +00:00
Juli Mallett
8961aadb2b o) Do boot descriptor parsing before console setup so that we can use a console
other than UART 0 from the outset.
o) Print board information from sysinfo after consoles have been initialized
   rather than doing it during boot descriptor parsing.
o) Use cvmx_safe_printf and platform_reset rather than panic when doing very
   early boot descriptor parsing before the console is set up.
o) Get rid of the global octeon_bootinfo.
2012-11-19 00:19:27 +00:00
Juli Mallett
36e83ea016 Add preliminary Octeon PCI console support. Radisys-specific PCI console
support may follow soon (it uses a proprietary memory layout, but operation
looks pretty trivial.)
2012-11-13 07:39:49 +00:00
Juli Mallett
405b925e39 Don't disable PCIe just because the host is not a PCI host; the latter flag
only applies to non-PCIe systems.  If PCIe is in target mode, it will simply
and gracefully fail to attach of its own accord.
2012-11-01 20:39:39 +00:00
Juli Mallett
ca765bc7ab Fix longstanding misprint. 2012-10-31 04:44:32 +00:00
Juli Mallett
3ef3b736dc If the CF physical base is 0, attach no CF devices. This fixes a warning
about a 0 passed to cvmx_phys_to_ptr on systems without a CF interface,
such as the RSYS4GBE.
2012-10-31 04:23:36 +00:00
Juli Mallett
3631682eab Actually check board type rather than using a specialized octeon_is_simulation
function.
2012-10-30 06:36:14 +00:00
Juli Mallett
3fc2bc974b Remove oct_read64 and oct_write64 and use their equivalents from the Simple
Executive, which are used everywhere else in the Octeon port.  While here,
remove other unused things from octeon_pcmap_regs.h.
2012-10-30 06:29:17 +00:00
Juli Mallett
d1d2f57d4a Remove stale declarations. 2012-10-30 06:19:46 +00:00
Juli Mallett
684ba62e3f Speed feature tests and initialize helper configuration that some CPUs require. 2012-10-30 06:07:30 +00:00
Juli Mallett
0a5f2ecced Add a sysctl to change the LED display. 2012-10-29 07:06:23 +00:00
Juli Mallett
a1d1611d51 Wrap some long lines and display board serial numbers at boot. 2012-10-29 02:10:20 +00:00
Juli Mallett
1f51baaa92 Use Simple Executive LED display routines, which correctly use the LED base
address passed from the bootloader, rather than using a hard-coded value.

Make FreeBSD announce itself on the LED display similar to other kernels.

Remove uses of the previous LED routines, which were under-used and only used
in drivers for what seem like debugging purposes, despite those drivers being
widely-tested.

Remove several inlines for accessing memory that duplicate other functions
which are now used instead, as they are now entirely unused.
2012-10-29 00:51:53 +00:00
Juli Mallett
5eceedc5a0 Add missing return that broke 8-bit CF support in refactoring in r222671.
Tested on a Cavium CN5860-EVB-NIC4.  This was broken for over a year.
2012-10-27 23:36:41 +00:00
Juli Mallett
452f8dcf7b Don't attach if the bootloader has not indicated that we're a PCI host. This
fixes booting on systems which are PCI targets.
2012-10-26 00:04:05 +00:00
Hans Petter Selasky
0324d54acb Inherit USB mode from RootHUB port where the USB device is connected.
Only RootHUB ports can be dual mode. Disallow OTG ports on external HUBs.
This simplifies some checks in the USB controller drivers.

MFC after:	1 week
2012-10-01 05:42:43 +00:00
Rui Paulo
8c09f7b626 The GPIO drivers were initialising their mutexes with type of
MTX_NETWORK_LOCK. This is wrong since these mutexes have nothing to do
with networking.
2012-08-17 04:44:57 +00:00
Warner Losh
f3140a8923 octeon_uart_class was removed some time ago everywhere but here. 2012-06-28 06:49:04 +00:00
Juli Mallett
84db023ec1 Assume a big-endian default on MIPS and drop the "eb" suffix from MACHINE_ARCH.
This makes our naming scheme more closely match other systems and the
expectations of much third-party software.  MIPS builds which are little-endian
should require and exhibit no changes.  Big-endian TARGET_ARCHes must be
changed:
	From:		To:
	mipseb		mips
	mipsn32eb	mipsn32
	mips64eb	mips64

An entry has been added to UPDATING and some foot-shooting protection (complete
with warnings which should become errors in the near future) to the top-level
base system Makefile.
2012-03-29 02:54:35 +00:00
Juli Mallett
df42d19401 Turn on messages from the Simple Executive codebase, what few there are. 2012-03-29 02:05:11 +00:00
Oleksandr Tymoshenko
5e608d0b09 Remap PMC interrupt for all cores 2012-03-24 06:28:15 +00:00
Oleksandr Tymoshenko
f86a93b5be Add pseudo-device for handling PMC interrupts and link everything
PMC-related to build
2012-03-23 00:11:54 +00:00
Oleksandr Tymoshenko
ae849c7c42 Setup fake MODINFO variables for octeon kernel 2012-03-23 00:01:09 +00:00
Juli Mallett
ce30db0b31 o) Don't keep drive parameters in a global, put them in the softc.
o) Don't report a bogus stripesize.
o) Eliminate a nearby gratuitous "proxy" indirection.
2012-03-21 10:27:12 +00:00
Juli Mallett
b5acc0d618 Disable the Simple Executive's error decoding/reporting code. 2012-03-11 06:55:17 +00:00
Juli Mallett
dc4ee6ca91 Merge the Cavium Octeon SDK 2.3.0 Simple Executive code and update FreeBSD to
make use of it where possible.

This primarily brings in support for newer hardware, and FreeBSD is not yet
able to support the abundance of IRQs on new hardware and many features in the
Ethernet driver.

Because of the changes to IRQs in the Simple Executive, we have to maintain our
own list of Octeon IRQs now, which probably can be pared-down and be specific
to the CIU interrupt unit soon, and when other interrupt mechanisms are added
they can maintain their own definitions.

Remove unmasking of interrupts from within the UART device now that the
function used is no longer present in the Simple Executive.  The unmasking
seems to have been gratuitous as this is more properly handled by the buses
above the UART device, and seems to work on that basis.
2012-03-11 06:17:49 +00:00
Juli Mallett
ecdb6b0261 Fix promiscuous mode with if_octm:
o) The MAC set must occur before the multicast list is set up as the former
   will enable the CAM unconditionally, while promiscuous mode disables it,
   so if promiscuous mode is to be set this must occur after the MAC is
   programmed.
o) The multicast list must be set up unconditionally as even if flags have
   not changed, if the interface has gone through a reinitialization, the
   state of the CAM as changed by the MAC initialization could be incorrect.
o) Call octm_init when flags change, even if the interface is already running.
2012-03-11 00:34:14 +00:00
Juli Mallett
4228a524fd When creating a handle for a subregion, be sure to actually math out the new
handle address, where we're using handles as raw addresses.

This fixes devices with subregions on Octeon PCI specifically, and likely also on
MIPS more generally, where there isn't another bus_space in use that was doing the
math already.
2012-03-02 21:46:31 +00:00
Juli Mallett
3b7eabb569 Unbreak SMP on stock Octeon systems -- copy the core_mask from bootinfo into
sysinfo.  This should have been done as part of replacing bootinfo with sysinfo.
2012-03-02 20:34:15 +00:00
Oleksandr Tymoshenko
f3318c38dc Revert part of old logic of assigning MAC addressess:
- Reserver respective number of addresses for managment port
- octm uses base address directly
- other drivers get MACs on "first come first served" basis

Reviewed by:	juli
2012-02-29 05:48:29 +00:00
Oleksandr Tymoshenko
57fa7d3101 Refctor address assignment for Octeon's ethernet ports:
- Centralize address assignment
- Make sure managment ports get first MAC address in pool
- Properly propagate fail if address allocation failed

Submitted by:	Andrew Duane <aduane@juniper.net>
2012-02-22 01:30:25 +00:00
Oleksandr Tymoshenko
cccc098d9b We use port_index field of struct octusb_qh to reference USB state
of root HUB. Although it is initialized with port index of the
device's parent hub, which is worng. So track the USB tree up to
root HUB  and initialize this filed ptroprly

Rename port_index to root_port_index in order to reflect its
real semantics.
2012-01-20 23:37:04 +00:00
Oleksandr Tymoshenko
6cc1d135cd - Add better COP2 (crypto coprocessor) context handler for Octeon. Keep
COP2 disabled and lazily allocate COP2 context structure in exception
    handler. Keep kernel and userland contexts separated.
2012-01-06 01:23:26 +00:00
Oleksandr Tymoshenko
1f74cf8ccf - Octeon-SDK strictly requires multi_count to be zero for
full and low speed devices.
2012-01-03 19:10:37 +00:00
Oleksandr Tymoshenko
af8b177113 - Properly set IRQ handlers for all USB ports 2012-01-01 09:12:21 +00:00
Oleksandr Tymoshenko
868fb4d19b - struct clocktime sets different ranges for DOW and month
comparing to struct timeval. for clocktime they should be
    1..7 and 1..12 respectively

- CAPK-0100ND uses RTC without centruy bit (DS1307) so set it 21st
2011-12-31 23:21:36 +00:00
Oleksandr Tymoshenko
9db595847a - Pass proper endpoint number (without direction flag) to
cvmx_usb_open_pipe
2011-12-31 05:45:10 +00:00
Oleksandr Tymoshenko
6b194c7ade - Add generic GPIO driver for Cavium Octeon. At the moment pin definition is
hardcoded but will be changed later with more flexible way to define them.
2011-12-28 05:57:03 +00:00
Oleksandr Tymoshenko
27e093e7f4 - Initialize compact_flash_attribute_base_addr from bootinfo structure 2011-12-24 23:15:25 +00:00
Oleksandr Tymoshenko
5a312a4a9a - Set CF physical address base in sysinfo structure 2011-12-23 22:10:55 +00:00
Bjoern A. Zeeb
3b29d0033d Unbreak the OCTEON1 kernel build after r228483 removing the left over
declaration.

MFC after:	11 days
2011-12-17 15:42:37 +00:00
Hans Petter Selasky
2e14174893 Implement better support for USB controller suspend and resume.
This patch should remove the need for kldunload of USB
controller drivers at suspend and kldload of USB controller
drivers at resume.

This patch also fixes some build issues in avr32dci.c

MFC after:	2 weeks
2011-12-14 00:28:54 +00:00
Oleksandr Tymoshenko
ba3ba72812 - Copy base MAC address from bootinfo descriptor to sysinfo struct
Reviewed by:	Andrew Duane
2011-11-28 19:28:29 +00:00
Hans Petter Selasky
3b12bdb58f Rename device_delete_all_children() into device_delete_children().
Suggested by:	jhb @ and marius @
MFC after:	1 week
2011-11-22 21:56:55 +00:00
Marius Strobl
4b7ec27007 - There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
  (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
  since r52045) but even recently added device drivers do this unnecessarily.
  Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
  Discussed with: jhb
- Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00