Commit Graph

162499 Commits

Author SHA1 Message Date
Jung-uk Kim
33a7ed1f45 Re-merge with ACPICA vendor source. 2011-04-15 21:38:24 +00:00
Jung-uk Kim
848049e223 Redo r220658. More extensive patch was committed by Intel:
http://git.moblin.org/cgit.cgi/acpica/commit/?id=16c9bbd6a3d8da88664d769ceec2f1757964fc7a

Obtained from:	ACPICA
2011-04-15 21:33:45 +00:00
Bernhard Schmidt
f6bb3360b6 fix the order of the prototypes from the previosu commit 2011-04-15 20:40:49 +00:00
Bernhard Schmidt
89a84499e4 The 6005 series devices need additional temperature offset calibration
as well as the IWN_GP_DRIVER_CALIB_VER6 bit set.

Obtained from:	OpenBSD
2011-04-15 20:35:15 +00:00
Bernhard Schmidt
083e216732 Revert some of local calibration changes in favour of the OpenBSD
implementation. This includes the fix required for the 6050 series
devices.
2011-04-15 20:31:02 +00:00
Bernhard Schmidt
518e267e38 remove debug left-overs 2011-04-15 20:19:18 +00:00
Bernhard Schmidt
af2e228dc4 Split up watchdog and calibration callout. This allows us to use different
timing on both and to remove some monitor mode specific hacks (which has
no calibration).
2011-04-15 20:17:52 +00:00
Jung-uk Kim
d052a1cc33 Merge ACPICA 20110413. 2011-04-15 18:34:27 +00:00
Bernhard Schmidt
16b483cb8d Split out bluetooth coexistence setup. 2011-04-15 17:10:52 +00:00
Bernhard Schmidt
b558f70709 Fixes for firmware handling:
- there is a local variable for sc->fw_dma, use that instead
- OpenBSD uses 5*hz to wait for firmware to be loaded
- in case the firmware module contains invalid data, actually release it
2011-04-15 16:59:56 +00:00
Bernhard Schmidt
a7387751dd Only handle beacon misses while in RUN state and not scanning. 2011-04-15 16:55:45 +00:00
Bernhard Schmidt
69e775c384 Don't timeout when stopping DMA channels.
Obtained from:	OpenBSD
2011-04-15 16:50:37 +00:00
Jung-uk Kim
b8b782f913 Fix build on FreeBSD. This patch was submitted upstream:
http://lists.acpica.org/pipermail/devel/2011-April/000253.html

Similar fixes will show up in the next ACPICA release.
2011-04-15 16:44:04 +00:00
Alexander Motin
06ccfe1dd7 Some changes around hot-plug and interface power-management:
- use ATA_SE_EXCHANGED (SError.DIAG.X) bit to detect hot-plug events when
power-management enabled and ATA_SE_PHY_CHANGED (SError.DIAG.N) can't be
trusted;
 - on controllers supporting staggered spin-up (SS) put unused channels
into Listen state instead of Off. It should still save some power, but
allow plug-in events to be detected;
 - on controllers supporting cold presence detection (CPD), when power
management enabled, use CPD events to detect hot-plug in addition to PHY
events.
2011-04-15 16:40:31 +00:00
Jilles Tjoelker
1e5dccaa9b sh: Add test for bin/12137. 2011-04-15 15:33:24 +00:00
Jilles Tjoelker
9638724dc8 sh: Add test for obscure and ambiguous ${#?}. 2011-04-15 15:26:05 +00:00
Jilles Tjoelker
149cf1e03b sh: Add test for bin/56147. 2011-04-15 15:14:58 +00:00
Philip Paeps
b0321bb1e7 Add basic support for the Marvell Orion TS-7800.
Submitted by:	Kristof Provost <kristof -at- freebsd.org>
2011-04-15 13:37:43 +00:00
Gavin Atkinson
47bae5fd09 Remove an incorrect be16toh() that prevented geom_part_apm from working on
little-endian machines.

Reviewed by:	marcel
MFC after:	2 weeks
2011-04-15 12:32:52 +00:00
Alexander Motin
c3d0d168ae Make ada(4) driver put ATA disks into sleep state on suspend.
Submitted by:	jkim (original version)
2011-04-15 07:07:29 +00:00
Navdeep Parhar
2be67d2948 Fix a couple of bad races that can occur when a cxgbe interface is taken
down.  The ingress queue lock was unused and has been removed as part of
these changes.

- An in-flight egress update from the SGE must be handled before the
  queue that requested it is destroyed.  Wait for the update to arrive.

- Interrupt handlers must stop processing rx events for a queue before
  the queue is destroyed.  Events that have not yet been processed
  should be ignored once the queue disappears.

MFC after:	1 week
2011-04-15 03:09:27 +00:00
Rick Macklem
a09001a82b Fix the experimental NFSv4 server so that it uses VOP_PATHCONF()
to determine if a file system supports NFSv4 ACLs. Since
VOP_PATHCONF() must be called with a locked vnode, the function
is called before nfsvno_fillattr() and the result is passed in
as an extra argument.

MFC after:	2 weeks
2011-04-14 23:46:15 +00:00
Jung-uk Kim
4a8fa6fe58 Add event handlers for (ACPI) suspend/resume events. Suspend event handlers
are invoked right before device drivers go into sleep state and resume event
handlers are invoked right after all device drivers are waken up.
2011-04-14 22:17:39 +00:00
Jilles Tjoelker
3472288282 getfh(2): Add xrefs for fhopen(2), open(2), stat(2).
MFC after:	1 week
2011-04-14 22:06:11 +00:00
Rick Macklem
07c0c166e4 Modify the experimental NFSv4 server so that it handles
crossing of server mount points properly. The functions
nfsvno_fillattr() and nfsv4_fillattr() were modified to
take the extra arguments that are the mount point, a flag
to indicate that it is a file system root and the mounted
on fileno. The mount point argument needs to be busy when
nfsvno_fillattr() is called, since the vp argument is not
locked.

Reviewed by:	kib
MFC after:	2 weeks
2011-04-14 21:49:52 +00:00
Alexander Motin
b8b6b5d37a Make CAM report devices with ATA/SATA transport to devstat(9) as IDE. 2011-04-14 21:25:32 +00:00
Navdeep Parhar
6b49a4ece8 There is no need to request a tx credit flush if such a request is already
pending.

MFC after:	3 days
2011-04-14 20:06:23 +00:00
Andreas Tobler
415a54c8c5 Adjust debugging string to match the actual function.
Approved by: nwhitehorn (mentor)
2011-04-14 19:37:31 +00:00
Jung-uk Kim
8143750196 Use newly added rdtsc32() for DELAY(9) as well. 2011-04-14 19:11:45 +00:00
Edward Tomasz Napierala
ee2509d1a2 Add manual page for rctl.conf(5). 2011-04-14 18:37:27 +00:00
Andreas Tobler
8fd7d65779 The macro MOEA_PVO_CHECK is empty and not used. It is a left over from the
NetBSD import. Remove the definition and all its occurrences.

Approved by: nwhitehorn (mentor)
2011-04-14 18:26:50 +00:00
Andreas Tobler
3d20a4803b Add stoppcbs[] arrays on powerpc(64) and have each CPU save its
current context in the IPI_STOP handler. Similar as done on other
architectures.

Approved by: nwhitehorn (mentor)
2011-04-14 18:14:43 +00:00
Jung-uk Kim
0e78005e5c Work around an emulator problem where virtual CPU advertises TSC is P-state
invariant and APERF/MPERF MSRs exist but these MSRs never tick.  When we
calculate effective frequency from cpu_est_clockrate(), it caused panic of
division-by-zero.  Now we test whether these MSRs actually increase to avoid
such foot-shooting.

Reported by:	dim
Tested by:	dim
2011-04-14 17:50:26 +00:00
Bernhard Schmidt
9289984d4b Instead of trying to figure out which rxon.flags to clear, restart
from scratch. Remove htole16() calls, rxon.chan is an uint8_t,
ieee80211_chan2ieee() does return an ic_ieee as an int, but I heavily
doubt a htole16() will buy us anything here.
2011-04-14 17:42:21 +00:00
Bernhard Schmidt
8dace48f6b iwn_cleanup() is just a wrapper around iwn_detach(), call it directly
instead.
2011-04-14 17:31:34 +00:00
Bernhard Schmidt
b2d64bef7e Reuse net80211 code:
- IWN_TXOP_TO_US is equal to IEEE80211_TXOP_TO_US
- use IEEE80211_DUR_TU
- ieee80211_add_rates/ieee80211_add_xrates are public, use em
- copied ieee80211_add_ssid it is not public
2011-04-14 17:26:13 +00:00
Bernhard Schmidt
abd8979b98 Remove IWN_FLAG_HAS_5GHZ and IWN_PCI_BAR0, both unused. 2011-04-14 17:19:33 +00:00
Jung-uk Kim
727c7b2d66 Use newly added rdtsc32() for the timecounter_get_t method. 2011-04-14 17:08:23 +00:00
Jung-uk Kim
0e72764232 Add a function rdtsc32() to read lower 32 bits from TSC and discard upper
32 bits.  Some times compiler inserts unnecessary instructions to preserve
unused upper 32 bits even when it is casted to a 32-bit value.  It reduces
such compiler mistakes where every cycle counts.
2011-04-14 16:53:32 +00:00
Dimitry Andric
66c468d021 In r219639, SSSE3 instruction set support was backported to our gcc.
Therefore, we also need to install the new tmmintrin.h header containing
the related intrinsic functions, similar to xmmintrin.h, emmintrin.h,
etc.

Reported by:	George Liaskos <geo.liaskos@gmail.com>
2011-04-14 16:45:16 +00:00
Jung-uk Kim
4854ae249c Consistently use __volatile as the rest of this file. 2011-04-14 16:19:41 +00:00
Jung-uk Kim
f5ac47f44c Prefer C99 standard integers to reduce diff from i386 version. 2011-04-14 16:14:35 +00:00
Jung-uk Kim
f54c13ea44 Consistently use C99 standard integers as the rest of this file. 2011-04-14 16:02:52 +00:00
Nathan Whitehorn
0a4b5285d0 Provide a (belated) UPDATING note related to the new release-building
process so that fewer people will be caught unaware.

Requested by:	emaste
2011-04-14 15:44:44 +00:00
David E. O'Brien
189e4fad8a Add $FreeBSD$'s. 2011-04-14 15:42:15 +00:00
Gleb Smirnoff
443301e296 Revert r194662, since it breaks ng_ksocket(4) and may break
other socket consumers with alternate sb_upcall.

PR:		kern/154676
Submitted by:	Arnaud Lacombe <lacombar gmail.com>
MFC after:	7 days
2011-04-14 14:54:22 +00:00
Sergey Kandaurov
ced9253e4e Remove stale M_ZOMBIE malloc type.
This type is unused since embedding p_ru into struct proc.

MFC after:	1 week
2011-04-14 14:25:47 +00:00
Edward Tomasz Napierala
79bb84fb15 Refactor udp_input(), moving calls to u_tun_func() into udp_append().
Obtained from: Wheel Systems Sp. z o.o.
Reviewed by:	bz@
2011-04-14 10:40:57 +00:00
Bjoern A. Zeeb
05b9d121aa The mbuf_frag_size always was and is file local and not queried from base
user space tools via kvm.  Mark it static.

MFC after:	3 days
2011-04-14 09:47:09 +00:00
Alexander Motin
781338b6fd Fix typo in write_cache tunable name and move TUNABLE_INT_FETCH() out of
the SIM lock to fix WITNESS warning.

Reported by:	jh
2011-04-14 09:11:50 +00:00