Commit Graph

165 Commits

Author SHA1 Message Date
Doug Rabson
683523378c Move interrupt handling code from isa.c to a new file. This should make
isa.c (slightly) more portable and will make my life developing the really
portable version much easier.

Reviewed by:	peter, fsmp
1997-06-02 08:19:06 +00:00
Bruce Evans
20c776a50b Don't use -fomit-frame-pointer for ipl_funcs.c if ${PROF} is nonempty,
is incompatible with -pg.  (We use a different version of mcount for
profiling frame-pointer-less assembler functions, but gcc doesn't know
about this.)

Added a missing dependency.

Cleaned up trailing backslashes.

Added comment about config's limitations/bugs handling dependencies and
backslashe/newlines.

Finished removing support for isdn drivers.
1997-06-01 20:25:55 +00:00
Peter Wemm
f5d66b9bb4 specify compile-with option to get -fomit-frame-pointer on ipl_funcs.c 1997-05-31 18:01:38 +00:00
Peter Wemm
49c6ff7dc2 add ipl_funcs.c (Hmm.. should probably use a "compile-with" arg rather
than a Makefile.i386 hook)
1997-05-31 09:23:44 +00:00
Mike Smith
98d46ad0c9 Add the 'wl' ISA Wavelan driver.
Obtained from:	Jim Binkley <jrb@cs.pdx.edu>
1997-05-22 08:47:40 +00:00
Peter Wemm
477a642cee Man the liferafts! Here comes the long awaited SMP -> -current merge!
There are various options documented in i386/conf/LINT, there is more to
come over the next few days.

The kernel should run pretty much "as before" without the options to
activate SMP mode.

There are a handful of known "loose ends" that need to be fixed, but
have been put off since the SMP kernel is in a moderately good condition
at the moment.

This commit is the result of the tinkering and testing over the last 14
months by many people.  A special thanks to Steve Passe for implementing
the APIC code!
1997-04-26 11:46:25 +00:00
Justin T. Gibbs
c1aa7eb5f4 GENERIC, LINT:
Add an ie entry that corresponds to the location the old ix entry used
to probe and kill the ix entry.

files.i386:
Remove entries for the ix driver.
1997-04-14 00:35:25 +00:00
Justin T. Gibbs
d98667394d make obj before building the aic7xxx assembler. This puts the object
files in the right place.

The clean rule still isn't quite right since currently config doesn't
allow the specification of arbitrary clean rules.
1997-04-03 05:57:16 +00:00
KATO Takenori
4c024bbdf8 Improved CPU identification and initialization routines. This
supports All Cyrix CPUs, IBM Blue Lightning CPU and NexGen (now AMD)
Nx586 CPU, and initialize special registers of Cyrix CPU and msr of
IBM Blue Lightning CPU.

If revision of Cyrix 6x86 CPU < 2.7, CPU cache is enabled in
write-through mode.  This can be disabled by kernel configuration
options.

Reviewed by:	Bruce Evans <bde@freebsd.org> and
            	Jordan K. Hubbard <jkh@freebsd.org>
1997-03-22 18:54:54 +00:00
Bruce Evans
54c4d30615 Fixed broken line continuation in the previous revision. Config apparently
has buggy backslash-newline handling.  Avoid it by using whitespace before
backslash-newline.
1997-03-16 17:25:53 +00:00
Justin T. Gibbs
8733b9a7ca Adapt build rules to new aic7xxx seqeuncer assembler. 1997-03-16 07:09:01 +00:00
Mark Murray
a30c77e886 Move this files* entry for the Brooktree TV driver toi the right 'files*'. 1997-03-10 17:55:49 +00:00
Mark Murray
51e053d6cc Initial import of the Brooktree PCI-TV drivers. I have not tested
these, they may not even compile. I am importing them on behalf
of the submitters.
Submitted by:	amancio, smp
1997-03-10 06:38:26 +00:00
Peter Wemm
6875d25465 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00
Joerg Wunsch
e4107dcf00 This mega-merge brings Matt Thomas' 960801 FDDI driver (almost) up
to -current.

Thanks goes to Ulrike Nitzsche <ulrike@ifw-dresden.de> for giving me
a chance to test this.  Only the PCI driver is tested though.

One final patch will follow in a separate commit.  This is so that
everything up to here can be dragged into 2.2, if we decide so.

Reviewed by:	joerg
Submitted by:	Matt Thomas <matt@3am-software.com>
1997-01-17 23:54:45 +00:00
Jordan K. Hubbard
3b20426160 Add the ex driver (Intel EtherExpress Pro/10).
I have no idea if this works since I don't have one of the cards to test.
I also don't know what the LINT and GENERIC entries should look like,
so I just made up some values for now and left them commented out.
Someone who knows the factory settings for a Pro/10, please contact me!

Submitted-By: Javier Martín Rueda <jmrueda@diatel.upm.es>
1997-01-16 12:19:21 +00:00
Søren Schmidt
b6b9dfa17e Upgrade the kbdio rutines to provide queued kbd & mouse events.
Minor other updates to syscons by me.

Submitted by:	Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
1997-01-15 18:16:32 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Peter Wemm
31461d3a75 Back out my previous change here. aic7xxx_asm is only a stdio program
that runs in the host's build environment, not the kernel's environment.
1996-11-24 08:15:11 +00:00
Peter Wemm
2fa4e5a7fc Set a more explicit #include path for building aix7xxx_asm, otherwise it
uses /usr/include/sys/*, which may point to a different build tree.  I'm
not sure that this is necessary, but there was a question mark over what
/usr/include/sys points to when building the "user mode" binaries in the
kernel code, especially when building the smp tree.

I suspect that the "right" line here is to use ${INCLUDES}, but that
causes warnings about unused static inline functions in stdio.h and ctype.h
1996-11-22 04:27:43 +00:00
Jordan K. Hubbard
431995f177 This is the new AWE32 driver, with support for the AWE32's fancy MIDI
synthesizer.  The utilities for this will appear as port submissions soon
afterwards, according to the submitter.

Submitted-By: Randall Hopper <rhh@ct.picker.com>
Written-By: Takashi Iwai <iwai@dragon.mm.t.u-tokyo.ac.jp>
1996-11-15 18:36:25 +00:00
Søren Schmidt
6a90d9750d Finally a start at sharing the kdb controller routines between
syscons and psm, curtesy Kazutaka Yokota with minor changes by
me. This contains an update of the psm driver as well.
This also fixes the breakage that I introduced to the psm driver by
making syscons poll for keyboard events in the atempt to fix the
hanging keyboard problem.

It works perfectly for me, and I'd like to hear from all that
have had keyboard/ps/2 mouse problems if this is the cure...

Submitted by:	 Kazutaka YOKOTA (yokota@zodiac.mech.utsunomiya-u.ac.jp)
1996-11-14 22:19:17 +00:00
Bruce Evans
aebd564631 Compile linux_genassym with the same options as genassym. ${PARAM} and
- were missingUKERNEL.  This was harmless until I declared the kernel's
main().
1996-11-06 15:13:41 +00:00
Guido van Rooij
b3ac88f13f New vx driver for:
3COM 3C590 Etherlink III PCI,
        3COM 3C595 Fast Etherlink PCI,
        3COM 3C592 Etherlink III EISA,
        3COM 3C590 Fast Etherlink EISA,
        3COM 3C900 Etherlink XL PCI and
        3COM 3C905 Fast Etherlink XL PCI.

This driver is based on OpenBSD's driver. I modified it to run under FreeBSd
and made it actually work usefully.
Afterwards, nao@tom-yam.or.jp (HAMADA Naoki) added EISA support as well as
early support for 3C900 Etherlink XL PCI and 3C905 Fast Etherlink XL PCI.
He also split up the driver in a bus independant and bus dependant parts.

Especially the 3c59X support should be pretty stable now.

Submitted by:	partly nao@tom-yam.or.jp (HAMADA Naoki)
Obtained from:partly OpenBSD
1996-11-04 22:17:20 +00:00
Bruce Evans
d6b9e17eb5 Improved non-statistical (GUPROF) profiling:
- use a more accurate and more efficient method of compensating for
  overheads.  The old method counted too much time against leaf
  functions.
- normally use the Pentium timestamp counter if available.
  On Pentiums, the times are now accurate to within a couple of cpu
  clock cycles per function call in the (unlikely) event that there
  are no cache misses in or caused by the profiling code.
- optionally use an arbitrary Pentium event counter if available.
- optionally regress to using the i8254 counter.
- scaled the i8254 counter by a factor of 128.  Now the i8254 counters
  overflow slightly faster than the TSC counters for a 150MHz Pentium :-)
  (after about 16 seconds).  This is to avoid fractional overheads.

files.i386:
permon.c temporarily has to be classified as a profiling-routine
because a couple of functions in it may be called from profiling code.

options.i386:
- I586_CTR_GUPROF is currently unused (oops).
- I586_PMC_GUPROF should be something like 0x70000 to enable (but not
  use unless prof_machdep.c is changed) support for Pentium event
  counters.  7 is a control mode and the counter number 0 is somewhere
  in the 0000 bits (see perfmon.h for the encoding).

profile.h:
- added declarations.
- cleaned up separation of user mode declarations.

prof_machdep.c:
Mostly clock-select changes.  The default clock can be changed by
editing kmem.  There should be a sysctl for this.

subr_prof.c:
- added copyright.
- calibrate overheads for the new method.
- documented new method.
- fixed races and and machine dependencies in start/stop code.

mcount.c:
Use the new overhead compensation method.

gmon.h:
- changed GPROF4 counter type from unsigned to int.  Oops, this should
  be machine-dependent and/or int32_t.
- reorganized overhead counters.

Submitted by:	Pentium event counter changes mostly by wollman
1996-10-17 19:32:31 +00:00
Poul-Henning Kamp
96fc6efbe3 Make userconfig two (default: on) options:
USERCONFIG to enable
	VISUAL_USERCONFIG to get the gui stuff too.
Requested by: pst
1996-09-11 19:53:45 +00:00
Paul Traina
f8f0b4798e Support for GDB remote debug protocol.
Sponsored by: Juniper Networks, Inc. <pst@jnx.com>
1996-08-27 19:45:58 +00:00
Garrett Wollman
b184bc75f3 Fix something that's been bugging me for a long time: move the CPU
type identification code out of machdep.c and into a new file of its
own.  Hopefully other grot can be moved out of machdep.c as well
(by other people) into more descriptively-named files.
1996-07-08 19:44:39 +00:00
John Hay
d805b866fa This driver supports the SDL Communications RISCom/N2 ISA cards that is
based on the HD64570 chip. Both the 1 and 2 port cards is supported.

Line speeds of up to 2Mbps is possible. At this speed about 95% of the
bandwidth is usable with 486DX processors.

The standard FreeBSD sppp code is used for the link level layer. The
default protocol used is PPP. The Cisco HDLC protocol can be used by
adding "link2" to the ifconfig line in /etc/sysconfig or where ever
ifconfig is run.

At the moment only the X.21 interface is tested. The others may need
tweaks to the clock selection code.
1996-07-05 18:51:59 +00:00
Nate Williams
3b17c1c3f8 Added index as a 'standard' file. It could be added as 'optional' for
ibcs2, but I felt it might be useful in other code as well at a later
point.
1996-06-07 22:26:59 +00:00
Peter Wemm
98eba67210 Add stl and stli drivers for the Stallion cards. 1996-05-04 08:41:28 +00:00
Poul-Henning Kamp
f3e002a838 Rename the very bogus indeed option "LINUX" to "COMPAT_LINUX".
I can only presume that the brain behind this have never seen code
that says "#ifdef LINUX" :-(
1996-05-02 10:41:18 +00:00
Bruce Evans
98189b75c3 Removed references to nonexistent files. 1996-03-29 13:39:48 +00:00
Garrett Wollman
d69e850255 Add support for Pentium and Pentium Pro performance counters.
(This code is as yet untested; to come after man page is written.)
This also adds inlines to cpufunc.h for the RDTSC, RDMSR, WRMSR, and RDPMC
instructions.  The user-mode interface is via a subdevice of mem.c;
there is also a kernel-size interface which might be used to aid
profiling.
1996-03-26 19:57:56 +00:00
Peter Wemm
a8b0a5541d Add "linux_assym.h" as a dependency for linux_locore.o when compiling
the kernel with the linux emulator statically configured (options LINUX)

Problem noticed by: Brian Litzinger
1996-03-15 07:49:02 +00:00
Peter Wemm
d66a506616 Mega-commit for Linux emulator update.. This has been stress tested under
netscape-2.0 for Linux running all the Java stuff.  The scrollbars are now
working, at least on my machine. (whew! :-)

I'm uncomfortable with the size of this commit, but it's too
inter-dependant to easily seperate out.

The main changes:

COMPAT_LINUX is *GONE*.  Most of the code has been moved out of the i386
machine dependent section into the linux emulator itself.  The int 0x80
syscall code was almost identical to the lcall 7,0 code and a minor tweak
allows them to both be used with the same C code.  All kernels can now
just modload the lkm and it'll DTRT without having to rebuild the kernel
first.  Like IBCS2, you can statically compile it in with "options LINUX".

A pile of new syscalls implemented, including getdents(), llseek(),
readv(), writev(), msync(), personality().  The Linux-ELF libraries want
to use some of these.

linux_select() now obeys Linux semantics, ie: returns the time remaining
of the timeout value rather than leaving it the original value.

Quite a few bugs removed, including incorrect arguments being used in
syscalls..  eg:  mixups between passing the sigset as an int, vs passing
it as a pointer and doing a copyin(), missing return values, unhandled
cases, SIOC* ioctls, etc.

The build for the code has changed.  i386/conf/files now knows how
to build linux_genassym and generate linux_assym.h on the fly.

Supporting changes elsewhere in the kernel:

The user-mode signal trampoline has moved from the U area to immediately
below the top of the stack (below PS_STRINGS).  This allows the different
binary emulations to have their own signal trampoline code (which gets rid
of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so
that the emulator can provide the exact "struct sigcontext *" argument to
the program's signal handlers.

The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which
have the same values as the re-used SA_DISABLE and SA_ONSTACK which are
intended for sigaction only.  This enables the support of a SA_RESETHAND
flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal
semantics where the signal handler is reset when it's triggered.

makesyscalls.sh no longer appends the struct sysentvec on the end of the
generated init_sysent.c code.  It's a lot saner to have it in a seperate
file rather than trying to update the structure inside the awk script. :-)

At exec time, the dozen bytes or so of signal trampoline code are copied
to the top of the user's stack, rather than obtaining the trampoline code
the old way by getting a clone of the parent's user area.  This allows
Linux and native binaries to freely exec each other without getting
trampolines mixed up.
1996-03-02 19:38:20 +00:00
Paul Traina
9d2baf5cdf Update the Connectix QuickCam driver to match my current work.
- split driver into FreeBSD specific and camera specific portions
  (qcamio.c can run in user mode, with a Linux "driver top" etc,
   and qcam.c should be trivial to port to NetBSD and BSDI.)
- support for 4bppand bidirectional transfers working better
- start of interleaved data-transfers byte-stream decodes (some of this
  stuff has been pulled out for the moment to make it easier to debug)

At this point, anyone who wants to port it to other platforms should feel
free to do so.  Please feed changes directly back to me so that I can produce
a unified distribution.
1996-03-02 03:48:19 +00:00
Justin T. Gibbs
de0d93f53f Add i386/eisa/3c5x9.c, the eisaconf probe for the 3Com 3c579 and the
3c509 when in eisa configuration mode.
1996-02-26 00:58:38 +00:00
Paul Traina
4cf6236007 Add in hooks for quickcam driver 1996-02-02 06:55:35 +00:00
Garrett Wollman
5dec5a0060 Implement a prototype interface to bus-master IDE DMA on the Triton
chipset.  This does not attempt to do anything special with the timing
on the hope that the BIOS will have done the right thing already.  The
actual interface from the wd driver to the new facility is not
implemented yet (this commit being an attempt at prodding someone else
to do it because looking at the wd driver always confuses the h*** out of me).
1996-01-28 22:16:20 +00:00
Peter Wemm
1530906921 procfs_machdep.c is now shared with ptrace as well. It is now no longer
optional.
1996-01-24 18:47:58 +00:00
Poul-Henning Kamp
2898c294f4 Make bin2bcd and bcd2bin global macroes instead of having local
implementations all over the place.
1996-01-15 10:28:44 +00:00
Justin T. Gibbs
cc4f672cec The long awaited stability patch set for the aic7xxx driver:
aic7xxx.seq and aic7xxx.c depend on aic7xx_reg.h
1996-01-03 06:26:15 +00:00
Bruce Evans
912e603778 Implemented non-statistical kernel profiling. This is based on
looking at a high resolution clock for each of the following events:
function call, function return, interrupt entry, interrupt exit,
and interesting branches.  The differences between the times of
these events are added at appropriate places in a ordinary histogram
(as if very fast statistical profiling sampled the pc at those
places) so that ordinary gprof can be used to analyze the times.

gmon.h:
Histogram counters need to be 4 bytes for microsecond resolutions.
They will need to be larger for the 586 clock.
The comments were vax-centric and wrong even on vaxes.  Does anyone
disagree?

gprof4.c:
The standard gprof should support counters of all integral sizes
and the size of the counter should be in the gmon header.  This
hack will do until then.  (Use gprof4 -u to examine the results
of non-statistical profiling.)

config/*:
Non-statistical profiling is configured with `config -pp'.
`config -p' still gives ordinary profiling.

kgmon/*:
Non-statistical profiling is enabled with `kgmon -B'.  `kgmon -b'
still enables ordinary profiling (and distables non-statistical
profiling) if non-statistical profiling is configured.
1995-12-29 15:30:05 +00:00
Bruce Evans
62394a63c8 Removed almost all traces of libkern.a. The objects that were in
libkern.a are now specified by listing their source files in
files.${MACHINE}.  The list is machine-dependent to save space.
All the necessary object for each machine must be linked into the
kernel in case an lkm wants one.
1995-12-26 13:58:31 +00:00
Bruce Evans
337e9f0bd2 Renamed isa/random.c to isa/random_machdep.c to avoid a conflict with
libkern/random.c.
1995-12-26 12:50:24 +00:00
Julian Elischer
1dfcbb0ce3 i386/i386/conf.c is no longer needed.. remove it from files.i386
redistribute a few last routines to beter places and shoot the file

I haven't act actually 'deleted' the file yet togive people time
to
have done a config.. I.e. they are likely to have done one in a week or so
so I'll remove it then..
 it's now empty.
makes the question of a USL copyright rather moot.
1995-12-21 20:09:46 +00:00
Peter Wemm
b1529bda75 GENERIC/LINT: Remove redundant quoting on some option lines.
LINT: add a couple of new/missing/undocumented options
files.i386: add linux code so that you can compile a kernel with static
linux emulation ("options LINUX")
i386/*: use #if defined(COMPAT_LINUX) || defined(LINUX) to enable static
support of linux emulation (just like "IBCS2" makes ibcs2 static)

The main thing this is going to make obvious, is that the LINUX code
(when compiled from LINT) has a lot of warnings, some of which dont look
too pleasant..
1995-12-14 14:35:36 +00:00
Justin T. Gibbs
a1d01daf77 Have bt0 entry specify "bt_isa_intr" for its vector. This one entry will
allow one EISA/ISA/PCI/VL Buslogic controller to be probed.  The driver
is almost fully dynamic.  It just needs some kdc work and for the SCSI code
to stop passing unit numbers up in the scsi_xfer struct.
1995-12-12 08:46:40 +00:00
Peter Wemm
e7c234a1a1 Add and document the hooks for John Hay's Arnet sync driver... 1995-11-21 02:50:10 +00:00