The new IDs are taken from the hardware to which I have access
and from open datasheets.
Also, the hardware probing is moved to the device probe method.
Reviewed by: rpokala
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11730
CAM_DEBUG_TRACE results in way too much debug output than needed now.
When debugging, it's always possible to turn on trace level using camcontrol.
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D12110
illumos/illumos-gate@fae6347731fae6347731https://www.illumos.org/issues/5815
When panic() is called from within ztest, the mdb ::status command isn't as
useful as it could be since the global panicstr variable isn't updated. We
should modify the function to make sure panicstr is set, so ::status can
present the error message just like it does on a failed assertion.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Gordon Ross <gordon.ross@nexenta.com>
Reviewed by: Rich Lowe <richlowe@richlowe.net>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Prakash Surya <prakash.surya@delphix.com>
MFC after: 4 weeks
illumos/illumos-gate@fae6347731fae6347731https://www.illumos.org/issues/5815
When panic() is called from within ztest, the mdb ::status command isn't as
useful as it could be since the global panicstr variable isn't updated. We
should modify the function to make sure panicstr is set, so ::status can
present the error message just like it does on a failed assertion.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Sebastien Roy <sebastien.roy@delphix.com>
Reviewed by: Gordon Ross <gordon.ross@nexenta.com>
Reviewed by: Rich Lowe <richlowe@richlowe.net>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Prakash Surya <prakash.surya@delphix.com>
illumos/illumos-gate@e2fc3408efe2fc3408efhttps://www.illumos.org/issues/8376
The logic for generating and maintaining the cached v_path value on vnodes
could stand to be improved. If vnodes were purely ephemeral, then freshly
calculating v_path at the time of lookup() would result in correct values (at a
performance cost). When they persist, either as referenced by other structures
(such as open files, process cwd, dnlc entries, etc), the opportunity for the
v_path to become stale arises. This is exacerbated by the current behavior
that, when v_path is found to be invalid (during a vnodetopath operation) will
strive to recalculate it, but not preserve the result. The overall situation
leads to both performance and correctness (due to lack of results) problems
relating to v_path.
This has been addressed in SmartOS through a series of changes. Firstly, to do
proper invalidation of v_path when it's found to be stale:
- OS-3891 stale v_path slows vfs lookups
OS-3891 revealed that some logic made assumptions about v_path never
transitioning from non-NULL to NULL. It was addressed here:
- OS-4317 v_path accesses can race
While the pathological stale v_path behavior had been addressed, there are
still cases where the absence of valid v_path information was causing problems.
The largest patch in this series addressed it by performing v_path checking and
updates during vnode lookups/updates, when it is most convenient:
- OS-5167 cached v_path should be kept fresh
Two smaller updates are included too, to prevent erroneous behavior introduced
by the prior changes:
- OS-5846 procfs should follow VFS rules
- OS-6134 vn_reinit balks on zeroed vnodes
Reviewed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Patrick Mooney <pmooney@pfmooney.com>
illumos/illumos-gate@4f4378cc544f4378cc54https://www.illumos.org/issues/8331
zfs_unshare returns EZFS_UNSHARENFSFAILED on error for all share types.
Reviewed by: Marcel Telka <marcel@telka.sk>
Reviewed by: Toomas Soome <tsoome@me.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Andrew Stormont <astormont@racktopsystems.com>
MFC after: 4 weeks
illumos/illumos-gate@d1672efb6fd1672efb6fhttps://www.illumos.org/issues/6280
The unshare_one() in libzfs could fail with EZFS_SHARENFSFAILED at line 834
here:
831 /* make sure libshare initialized */
832 if ((err = zfs_init_libshare(hdl, SA_INIT_SHARE_API)) != SA_OK) {
833 free(mntpt); /* don't need the copy anymore */
834 return (zfs_error_fmt(hdl, EZFS_SHARENFSFAILED,
835 dgettext(TEXT_DOMAIN, "cannot unshare '%s': %s"),
836 name, _sa_errorstr(err)));
837 }
The correct error should be EZFS_UNSHARENFSFAILED instead.
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Marcel Telka <marcel.telka@nexenta.com>
MFC after: 4 weeks
illumos/illumos-gate@4f4378cc544f4378cc54https://www.illumos.org/issues/8331
zfs_unshare returns EZFS_UNSHARENFSFAILED on error for all share types.
Reviewed by: Marcel Telka <marcel@telka.sk>
Reviewed by: Toomas Soome <tsoome@me.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Andrew Stormont <astormont@racktopsystems.com>
addresses. This allows the table to be consistent when IPv6
addresses have to be printed.
While there, document the -v option in the man page.
Sponsored by: Netflix, Inc.
Fix allocating more memory for the names (unlikely to be needed, but
still best to get right) to ask for the length the kernel told use we
needed, not the old length of the variable. Mind the proper NUL that
we add in the space we allocate. Free the old name string before we
allcoate a new one to limit what we leak to the last one (free passed
in name for the last one in the list), and detect the last one by rv
!= 0 and errno == ENOENT, rather then just the former to avoid false
positives if errno happens to be ENOENT on entry.
Sponsored by: Netflix
by Matt Macy as well as other changes which he has accepted via pull
request to his github repo at https://github.com/mattmacy/networking/
This should bring -CURRENT and the github repo into close enough sync to
allow small feature branches rather than a large chain of interdependant
patches being developed out of tree. The reset of the synchronization
should be able to be completed on github by splitting the remaining
changes that are not yet ready into short feature branches for later
review as smaller commits.
Here is a summary of changes included in this patch:
1) More checks when INVARIANTS are enabled for eariler problem
detection
2) Group Task Queue cleanups
- Fix use of duplicate shortdesc for gtaskqueue malloc type.
Some interfaces such as memguard(9) use the short description to
identify malloc types, so duplicates should be avoided.
3) Allow gtaskqueues to use ithreads in addition to taskqueues
- In some cases, this can improve performance
4) Better logging when taskqgroup_attach*() fails to set interrupt
affinity.
5) Do not start gtaskqueues until they're needed
6) Have mp_ring enqueue function enter the ABDICATED rather than BUSY
state. This moves the TX to the gtaskq and allows processing to
continue faster as well as make TX batching more likely.
7) Add an ift_txd_errata function to struct if_txrx. This allows
drivers to inspect/modify mbufs before transmission.
8) Add a new IFLIB_NEED_ZERO_CSUM for drivers to indicate they need
checksums zeroed for checksum offload to work. This avoids modifying
packet data in the TX path when possible.
9) Use ithreads for iflib I/O instead of taskqueues
10) Clean up ioctl and support async ioctl functions
11) Prefetch two cachlines from each mbuf instead of one up to 128B. We
often need to parse packet header info beyond 64B.
12) Fix potential memory corruption due to fence post error in
bit_nclear() usage.
13) Improved hang detection and handling
14) If the packet is smaller than MTU, disable the TSO flags.
This avoids extra packet parsing when not needed.
15) Move TCP header parsing inside the IS_TSO?() test.
This avoids extra packet parsing when not needed.
16) Pass chains of mbufs that are not consumed by lro to if_input()
rather call if_input() for each mbuf.
17) Re-arrange packet header loads to get as much work as possible done
before a cache stall.
18) Lock the context when calling IFDI_ATTACH_PRE()/IFDI_ATTACH_POST()/
IFDI_DETACH();
19) Attempt to distribute RX/TX tasks across cores more sensibly,
especially when RX and TX share an interrupt. RX will attempt to
take the first threads on a core, and TX will attempt to take
successive threads.
20) Allow iflib_softirq_alloc_generic() to request affinity to the same
cpus an interrupt has affinity with. This allows TX queues to
ensure they are serviced by the socket the device is on.
21) Add new iflib sysctls to net.iflib:
- timer_int - interval at which to run per-queue timers in ticks
- force_busdma
22) Add new per-device iflib sysctls to dev.X.Y.iflib
- rx_budget allows tuning the batch size on the RX path
- watchdog_events Count of watchdog events seen since load
23) Fix error where netmap_rxq_init() could get called before
IFDI_INIT()
24) e1000: Fixed version of r323008: post-cold sleep instead of DELAY
when waiting for firmware
- After interrupts are enabled, convert all waits to sleeps
- Eliminates e1000 software/firmware synchronization busy waits after
startup
25) e1000: Remove special case for budget=1 in em_txrx.c
- Premature optimization which may actually be incorrect with
multi-segment packets
26) e1000: Split out TX interrupt rather than share an interrupt for
RX and TX.
- Allows better performance by keeping RX and TX paths separate
27) e1000: Separate igb from em code where suitable
Much easier to understand separate functions and "if (is_igb)" than
previous tests like "if (reg_icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))"
#blamebruno
Reviewed by: sbruno
Approved by: sbruno (mentor)
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D12235
Normally after receiving a packet, a vlan(4) interface sends the packet
back through its parent interface's rx routine so that it can be
processed as an untagged frame. It does this by using the parent's
ifp->if_input. This is incompatible with netmap(4), which replaces the
vlan(4) interface's if_input with a netmap(4) hook. Fix this by using
the vlan(4) interface's ifp instead of the parent's directly.
Reported by: Harry Schmalzbauer <freebsd@omnilan.de>
Reviewed by: rstone
Approved by: rstone (mentor)
MFC after: 3 days
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12191
The cam_iosched_ticker() can't be scheduled more than once per tick.
Some limiters depend on quanta matching the number of calls per second
to enforce the proper limits. Limit the quanta to no faster than 1 per
clock tick. This fixes some features when running in VMs where the
default HZ is 100.
PR: 221953
Obtained from: ElectroBSD
Differential Revision: https://reviews.freebsd.org/D12337
Submitted by: Fabian Keil
warning about a filesystem which doesn't have a mountpoint. Presumably, the
person who wrote the install script knew what they were doing.
Submitted by: Brian Mueller <bmueller@panasas.com>
MFC after: 1 month
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D12346
If the iovctl command was invoked with only the -C flag, the user would
receive a message claiming that they needed to also supply either the
-d flag or the -f flag. However, in the case of the -C mode, only the
-f flag is acceptable. Correct this error message in this case.
PR: 222050
Submitted by: Heinz N. Gies
Reported by: Heinz N. Gies
MFC after: 1 week
It's awkward to have spaces in CAM device serial numbers. That leads to
such things as device nodes named "/dev/diskid/MYSERIAL%20%20%201". Better
to replace the spaces with "0"s. This change only affects the default
serial numbers for users who don't provide their own.
Reviewed by: ken, mav
MFC after: Never
Relnotes: Yes
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D12263
Newer binutils supports extensions to the MIPS ABI for non-PIC code
that is used when compiling O32 binaries with clang 5 (but not used
for N64 oddly enough). These extensions require support for
R_MIPS_COPY relocations as well as a second PLT GOT using
R_MIPS_JUMP_SLOT relocations.
For R_MIPS_COPY, use the same approach as on other architectures where
fixups are deferred to the MD do_copy_relocations.
The additional PLT GOT for jump slots is located in a .got.plt section
which is identified by a DT_MIPS_PLTGOT dynamic entry. This GOT also
requires fixups for the first two GOT entries just as the normal GOT.
However, the entry point for this second GOT uses a different calling
convention. Rather than passing an offset into the GOT, it passes an
offset into the .rel.plt section. This requires a second entry point
(_rtld_pltbind_start) which calls the normal _rtld_bind() rather than
_mips_rtld_bind(). This also means providing a real version of
reloc_jmpslot() which is used by _rtld_bind().
In addition, add real implementions of reloc_plt() and
reloc_jmpslots() which walk .rel.plt handling R_MIPS_JUMP_SLOT
relocations.
Reviewed by: kib
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D12326
On hard-float 32-bit arm platforms, always search for the soft float
binaries in the alternative locations.
Sponsored by: Netflix
Differential Review: https://reviews.freebsd.org/D12274
MFC After: 1 week
We have D definitions for the named values in socket.h after r323253. Remove
them in test script to prevent compiling failure.
Reviewed by: markj, gnn
Differential Revision: https://reviews.freebsd.org/D12334
The memory can be leaked if we will have pkt set and will get an error
during tftp_open() processing.
Differential Revision: https://reviews.freebsd.org/D12202
The zfsonlinux feature large_dnode is not yet supported by the loader.
Reviewed by: avg, allanjude
Differential Revision: https://reviews.freebsd.org/D12288
"probe" method of those drivers to mean we're on e TI SoC. Introduce a new
function, ti_soc_is_supported(), and use it to be sure we're really a TI
system.
PR: 222250
The uncovered vnode is possible because there is no guarantee that
its hold count would go to zero (and it would be inactivated and reclaimed)
immediately after a covering filesystem is unmounted.
So, such a vnode should be expected and it is possible to re-use it
without any trouble.
MFC after: 3 weeks
Sponsored by: Panzura
The only consumer of zfs_get_vfs, zfs_unmount_snap, does not need
the filesystem to be busy, it just need a reference that it can pass
to dounmount.
Also, previously the code was racy as it unbusied the filesystem
before taking a reference on it.
Now the code should be simpler and safer.
MFC after: 2 weeks
Sponsored by: Panzura
stop, read, and write methods. Some controllers don't implement these
individual operations and have only a transfer method. In that case, we
should return an indication that the device is present but doesn't support
the method, as opposed to the kobj default error ENXIO which makes it
look like the whole device is missing. Userland tools such as i2c(8) can
use the differing return values to switch between the two different i2c
IO mechanisms.
