Honoring the kernel-supplied opt_ipsec.h in r361632 causes builds of
ipsec modules to fail if the kernel doesn't include IPSEC_SUPPORT.
However, the module can never be loaded into such a kernel, so only
build the modules if the kernel includes IPSEC_SUPPORT.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D25059
To make this simpler, set the default contents of opt_ipsec.h
for standalone modules in sys/conf/config.mk.
Reviewed by: imp
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D25046
The ice(4) driver is the driver for the Intel E8xx series Ethernet
controllers; currently with codenames Columbiaville and
Columbia Park.
These new controllers support 100G speeds, as well as introducing
more queues, better virtualization support, and more offload
capabilities. Future work will enable virtual functions (like
in ixl(4)) and the other functionality outlined above.
For full functionality, the kernel should be compiled with
"device ice_ddp" like in the amd64 NOTES file, and/or
ice_ddp_load="YES" should be added to /boot/loader.conf so that
the DDP package file included in this commit can be downloaded
to the adapter. Otherwise, the adapter will fall back to a single
queue mode with limited functionality.
A man page for this driver will be forthcoming.
MFC after: 1 month
Relnotes: yes
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D21959
This patch introduces support for Epson RX-8803 RTC controller accessible
over I2C bus. It has a resolution of 1 sec.
Support for interrupt based alarm was not implemented.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D24364
Add basic TCA6416 GPIO expander support over I2C bus. The driver handles
enabling and disabling pins, setting pin mode to IN and OUT and
toggling the pins. External interrupts are not supported.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Reviewed by: manu, mmel
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D24363
This change adds Hyper-V socket feature in FreeBSD. New socket address
family AF_HYPERV and its kernel support are added.
Submitted by: Wei Hu <weh@microsoft.com>
Reviewed by: Dexuan Cui <decui@microsoft.com>
Relnotes: yes
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D24061
The CU-SeeMe videoconferencing client and associated protocol is at this
point a historical artifact; there is no need to retain support for this
protocol today.
Reviewed by: philip, markj, allanjude
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24790
Assume gcc is at least 6.4, the oldest xtoolchain in the ports tree.
Assume clang is at least 6, which was in 11.2-RELEASE. Drop conditions
for older compilers.
Reviewed by: imp (earlier version), emaste, jhb
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D24802
It no longer has any in-kernel consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24772
This was removed from IPsec in r286100 and no longer has any in-tree
consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24769
It no longer has any in-tree consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24768
Save and restore (also known as suspend and resume) permits a snapshot
to be taken of a guest's state that can later be resumed. In the
current implementation, bhyve(8) creates a UNIX domain socket that is
used by bhyvectl(8) to send a request to save a snapshot (and
optionally exit after the snapshot has been taken). A snapshot
currently consists of two files: the first holds a copy of guest RAM,
and the second file holds other guest state such as vCPU register
values and device model state.
To resume a guest, bhyve(8) must be started with a matching pair of
command line arguments to instantiate the same set of device models as
well as a pointer to the saved snapshot.
While the current implementation is useful for several uses cases, it
has a few limitations. The file format for saving the guest state is
tied to the ABI of internal bhyve structures and is not
self-describing (in that it does not communicate the set of device
models present in the system). In addition, the state saved for some
device models closely matches the internal data structures which might
prove a challenge for compatibility of snapshot files across a range
of bhyve versions. The file format also does not currently support
versioning of individual chunks of state. As a result, the current
file format is not a fixed binary format and future revisions to save
and restore will break binary compatiblity of snapshot files. The
goal is to move to a more flexible format that adds versioning,
etc. and at that point to commit to providing a reasonable level of
compatibility. As a result, the current implementation is not enabled
by default. It can be enabled via the WITH_BHYVE_SNAPSHOT=yes option
for userland builds, and the kernel option BHYVE_SHAPSHOT.
Submitted by: Mihai Tiganus, Flavius Anton, Darius Mihai
Submitted by: Elena Mihailescu, Mihai Carabas, Sergiu Weisz
Relnotes: yes
Sponsored by: University Politehnica of Bucharest
Sponsored by: Matthew Grooms (student scholarships)
Sponsored by: iXsystems
Differential Revision: https://reviews.freebsd.org/D19495
While here, add a makefile in sys/modules/allwinner so it is built.
Also add the PNP info so devmatch will load this module automatically.
MFC after: 1 month
The file handle affinity code was configured to be used by both the
old and new NFS servers. This no longer makes sense, since there is
only one NFS server.
This patch copies a majority of the code in sys/nfs/nfs_fha.c and
sys/nfs/nfs_fha.h into sys/fs/nfsserver/nfs_fha_new.c and
sys/fs/nfsserver/nfs_fha_new.h, so that the files in sys/nfs can be
deleted. The code is simplified by deleting the function callback pointers
used to call functions in either the old or new NFS server and they were
replaced by calls to the functions.
As well as a cleanup, this re-organization simplifies the changes
required for handling of external page mbufs, which is required for KERN_TLS.
This patch should not result in a semantic change to file handle affinity.
This removes support for using DES, Triple DES, and RC4.
Reviewed by: cem, kp
Tested by: kp
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24344
This NFS lock device driver was replaced by the kernel NLM around FreeBSD7 and
has not normally been used since then.
To use it, the kernel had to be built without "options NFSLOCKD" and
the nfslockd.ko had to be deleted as well.
Since it uses Giant and is no longer used, this patch removes it.
With this device driver removed, there is now a lot of unused code
in the userland rpc.lockd. That will be removed on a future commit.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D22933
Modern debuggers and process tracers use ptrace() rather than procfs
for debugging. ptrace() has a supserset of functionality available
via procfs and new debugging features are only added to ptrace().
While the two debugging services share some fields in struct proc,
they each use dedicated fields and separate code. This results in
extra complexity to support a feature that hasn't been enabled in the
default install for several years.
PR: 244939 (exp-run)
Reviewed by: kib, mjg (earlier version)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D23837
Centralize the list of generated files required by linuxkpi consumers,
into the common variable. This way, consumers that use the variable
are insulated from possible changes in the list.
Reviewed by: hselasky, imp
Sponsored by: Mellanox Technologies
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D24137
The devices supported by these drivers are obsolete ISA cards, and the
sync serial protocols they supported are essentially obsolete too.
Sponsored by: The FreeBSD Foundation
reasons. Those have now left the tree, and with them the need to have machdep
files. Places that called the routines in quesiton have been removed
previously. Remove these files from the Makefile to tidy up.
The ixl driver now works on PowerPC64 and may be compiled in-kernel and
as a module.
Reviewed by: alfredo, erj
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D23974
When iicbus is attached as child of Designware I2C controller it scans all
ACPI nodes for "I2C Serial Bus Connection Resource Descriptor" described
in section 19.6.57 of ACPI specs.
If such a descriptor is found, I2C child is added to iicbus, it's I2C
address, IRQ resource and ACPI handle are added to ivars. Existing
ACPI bus-hosted child is deleted afterwards.
The driver also installs so called "I2C address space handler" which is
disabled by default as nontested.
Set hw.iicbus.enable_acpi_space_handler loader tunable to 1 to enable it.
Reviewed by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22901
Port aacraid driver to big-endian (BE) hosts.
The immediate goal of this change is to make it possible to use the
aacraid driver on PowerPC64 machines that have Adaptec Series 8 SAS
controllers.
Adapters supported by this driver expect FIB contents in little-endian
(LE) byte order. All FIBs have a fixed header part as well as a data
part that depends on the command being issued to the controller.
In this way, on BE hosts, the FIB header and all FIB data structures
used in aacraid.c and aacraid_cam.c need to be converted to LE before
being sent to the adapter and converted to BE when coming from it.
The functions to convert each struct are on aacraid_endian.c.
For little-endian (LE) targets, they are macros that expand
to nothing.
In some cases, when only a few fields of a large structure are used,
the fields are converted inline, by the code using them.
PR: 237463
Reviewed by: jhibbits
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D23887
For drmkpi (D23085) we don't want the Linux struct file as we don't emulate
everything. Also the prototypes should be in shmem_fs.h to have 100%
compatibility with Linux.
Reviewed by: hselasky
MFC after: Maybe
Differential Revision: https://reviews.freebsd.org/D23764
Namely, vmm.ko cannot be compiled without 'option SMP', the code uses
IPIs and LAPIC.
Recently systrace was forced over any configs, check for KDTRACE_HOOK
before compiling the dtrace/ modules.
Reviewed by: markj
Discussed with: mjg
Tested by: se (previous version)
Sponsored by: The FreeBSD Foundation (kib)
Differential revision: https://reviews.freebsd.org/D23699
I believe this is left over from when dtrace was being ported and
developed out-of-tree. Now it just ensures that dtrace.ko and a non-SMP
kernel have incompatible KBIs.
PR: 243711
Sponsored by: The FreeBSD Foundation
The Parallel Port SCSI adapter was interesting for 100MB ZIP drives, but is no
longer used or maintained. Remove it from the tree.
The Parallel Port microsequencer (microseq.9) is now mostly unused in the tree,
but remains. PPI still refrences it, but doesn't use its full functionality.
Relnotes: Yes
Reviewed by: rgrimes@, Ihor Antonov
Discussed on: arch@
Differential Revision: https://reviews.freebsd.org/D23389
the ! operator should have been a ~ instead:
Merge r357348 from the clang 10.0.0 import branch:
Disable new clang 10.0.0 warnings about converting the result of
shift operations to a boolean in tpm(4):
sys/dev/tpm/tpm_crb.c:301:32: error: converting the result of '<<' to a boolean; did you mean '(1 << (0)) != 0'? [-Werror,-Wint-in-bool-context]
WR4(sc, TPM_CRB_CTRL_CANCEL, !TPM_CRB_CTRL_CANCEL_CMD);
^
sys/dev/tpm/tpm_crb.c:73:34: note: expanded from macro 'TPM_CRB_CTRL_CANCEL_CMD'
#define TPM_CRB_CTRL_CANCEL_CMD BIT(0)
^
sys/dev/tpm/tpm20.h:60:19: note: expanded from macro 'BIT'
#define BIT(x) (1 << (x))
^
Such warnings can be useful in C++ contexts, but not so much in kernel
drivers, where this type of bit twiddling is commonplace. So disable
it for this case.
Noticed by: cem
MFC after: 3 days
Disable new clang 10.0.0 warnings about converting the result of shift
operations to a boolean in tpm(4):
sys/dev/tpm/tpm_crb.c:301:32: error: converting the result of '<<' to a boolean; did you mean '(1 << (0)) != 0'? [-Werror,-Wint-in-bool-context]
WR4(sc, TPM_CRB_CTRL_CANCEL, !TPM_CRB_CTRL_CANCEL_CMD);
^
sys/dev/tpm/tpm_crb.c:73:34: note: expanded from macro 'TPM_CRB_CTRL_CANCEL_CMD'
#define TPM_CRB_CTRL_CANCEL_CMD BIT(0)
^
sys/dev/tpm/tpm20.h:60:19: note: expanded from macro 'BIT'
#define BIT(x) (1 << (x))
^
Such warnings can be useful in C++ contexts, but not so much in kernel
drivers, where this type of bit twiddling is commonplace. So disable it
for this case.
MFC after: 3 days
operations to a boolean in tpm(4):
sys/dev/tpm/tpm_crb.c:301:32: error: converting the result of '<<' to a boolean; did you mean '(1 << (0)) != 0'? [-Werror,-Wint-in-bool-context]
WR4(sc, TPM_CRB_CTRL_CANCEL, !TPM_CRB_CTRL_CANCEL_CMD);
^
sys/dev/tpm/tpm_crb.c:73:34: note: expanded from macro 'TPM_CRB_CTRL_CANCEL_CMD'
#define TPM_CRB_CTRL_CANCEL_CMD BIT(0)
^
sys/dev/tpm/tpm20.h:60:19: note: expanded from macro 'BIT'
#define BIT(x) (1 << (x))
^
Such warnings can be useful in C++ contexts, but not so much in kernel
drivers, where this type of bit twiddling is commonplace. So disable it
for this case.
MFC after: 3 days
if_vlan grew a dependency on opt_inet6.h in r356993
if_lagg and if_vlan both grew a dependency on opt_kern_tls.h in r351522
This is needed for standalone module builds of these guys.
