Commit Graph

49 Commits

Author SHA1 Message Date
John Baldwin
0d484d249f Allow device hints to wire the unit numbers of devices.
- An "at" hint now reserves a device name.
- A new BUS_HINT_DEVICE_UNIT method is added to the bus interface.  When
  determining the unit number of a device, this method is invoked to
  let the bus driver specify the unit of a device given a specific
  devclass.  This is the only way a device can be given a name reserved
  via an "at" hint.
- Implement BUS_HINT_DEVICE_UNIT() for the acpi(4) and isa(4) bus drivers.
  Both of these busses implement this by comparing the resources for a
  given hint device with the resources enumerated by ACPI/PnPBIOS and
  wire a unit if the hint resources are a subset of the "real" resources.
- Use bus_hinted_children() for adding hinted devices on isa(4) busses
  now instead of doing it by hand.
- Remove the unit kludging from sio(4) as it is no longer necessary.

Prodding from:	peter, imp
OK'd by:	marcel
MFC after:	1 month
2008-11-18 21:01:54 +00:00
Warner Losh
132580b5af MFp4:
Make the ISA bus keep track of more PNP details.  Plus a minor style
fix while I'm here.  More could be done here, but except for some SBCs
that don't have ACPI, there's limited value to anybody in doing so.
2008-11-02 18:48:54 +00:00
Warner Losh
5b4ae40039 MFp4 (my newcard tree):
ISACFGATTR_MULTI is unused.  Retire it, and a function that has no
side effects used to compute it.
2008-08-24 07:40:14 +00:00
John Baldwin
90dea4f9a7 When trying to allocate a PnP BIOS memory resource, the code loops trying
to move up the start address until the allocation succeeds.  If the
alignment of the resource was 0, then the code would keep trying the same
request in an infinite loop and hang.  Force the request to always move
start up by at least 1 byte each time through the loop.
2007-04-17 15:14:23 +00:00
Marius Strobl
acb8c14985 Make the ISAPNP code optional and only enable it on i386 and pc98 (used
for CBUS-PNP cards there) by default, as there are no amd64 and sparc64
machines with ISA slots and which therefore could make use of this code
known to exist. For sparc64 this additionally allows to get rid of the
compat shims for in{b,w,l}()/out{b,w,l}() etc and the associated hacks.

OK'ed by:	imp, peter
2006-06-12 21:07:13 +00:00
John Baldwin
73dbd3da73 Remove various bits of conditional Alpha code and fixup a few comments. 2006-05-12 05:04:46 +00:00
Warner Losh
a81804d94f Add pnp and location info for the ISA bus. The pnp info is the
primary vendor id for this device.  The location is empty because ISA
doesn't give one a way to generally locate a card.  PNP BIOS entries
do provide a way to locate cards, as do isa pnp cards.  These
locations will be added as soon as the code to remember them is
written.
2005-08-01 07:03:10 +00:00
Warner Losh
36fed96550 Use STAILQ in preference to SLIST for the resources. Insert new resources
last in the list rather than first.

This makes the resouces print in the 4.x order rather than the 5.x order
(eg fdc0 at 0x3f0-0x3f5,0x3f7 is 4.x, but 0x3f7,0x3f0-0x3f5 is 5.x).  This
also means that the pci code will once again print the resources in BAR
ascending order.
2005-03-18 05:19:50 +00:00
Warner Losh
784d07b40d Protect against wrapping. This appaers to fix some hangs that people
have seen in the isa pnp case where a resource buts up against
0xffffffff.  This would only impact when the board was booted without
ACPI.

Submitted by: Ed Maste (freebsd-stable <20050103145720.GA90754@sandvine.com>)
MFC After: 5 days
2005-01-23 03:03:58 +00:00
Warner Losh
9b01161ec3 Formatting nits 2004-12-27 18:18:38 +00:00
Warner Losh
812fb8f294 Get rid of #ifdef for legacy system. Move that into the MD code.
Export minimal symbols to allow this to happen.
2004-12-24 23:03:17 +00:00
Warner Losh
09aafea1c6 A few style(9) changes before more extensive changes:
o u_intXX_t -> uintXX_t
o use 8 character tabs
o proper wrapping
o return (value);
2004-12-24 22:31:47 +00:00
Nate Lawson
5f96beb9e0 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
John Baldwin
c37faf267c - Make the isab devclass global to allow for multiple ISA bridge drivers.
- Factor out code common to all ISA bridge drivers attach methods into a
  isab_attach() function.
- Rename the PCI-ISA bridge driver's attach function to pci_isab_attach()
  and have it call isab_attach().
2003-07-08 18:56:58 +00:00
David E. O'Brien
8c9bbf484a Use __FBSDID(). 2003-06-11 00:34:37 +00:00
Peter Wemm
0eb8d2e84a Create a 'legacy' node for AMD64 as well as i386. While we'll never
have to use it since all AMD64 machines are supposed to have acpi etc,
I'm using it during development so I can avoid the acpi code for now.
Yes, this is cheating.
2003-04-30 21:41:41 +00:00
Matthew N. Dodd
f7130d0977 Add a module version number. 2003-04-15 04:19:49 +00:00
John Baldwin
63e30378bc - Use __BUS_ACCESSOR() to define the ISA ivar accessor functions instead of
homerolling our own version.
- Rename the enum for memsize from ISA_IVAR_MSIZE to ISA_IVAR_MEMSIZE
  since using 'MSIZE' in the macro invocation of ISA_ACCESSOR() conflicts
  with the 'MSIZE' kernel option.  The accessor function is still
  isa_get_msize().
2002-10-15 00:02:51 +00:00
Poul-Henning Kamp
f46708e081 Don't leak memory in case device_add_child_ordered() returns NULL.
Found by:	FlexeLint
2002-09-30 07:56:12 +00:00
John Baldwin
c1e309b38b Argh, isa(4), eisa(4) and mca(4) now attach to legacy(4) instead of
nexus(4) in the case of machines w/o equivalent bridges on a PCI bus.

Reported by:	winter
Pointy hat to:	jhb
2002-09-26 18:40:06 +00:00
Alfred Perlstein
0077e8223b Fix style bugs:
Missing `const' qualifier.
Initialization in declaration.

Submitted by: mike
2002-02-24 23:24:01 +00:00
Alfred Perlstein
b2e4739f7e Give a little more information as to why pnp configuration of a device
may have failed.

Submitted by: Terry Lambert <tlambert2@mindspring.com>
2002-02-24 22:27:54 +00:00
Thomas Moestl
01f1aed259 Use the new resource_list_print_type() function.
Pass the bus device to isa_init() (this is needed for the sparc64
version).
2001-12-21 21:54:56 +00:00
Kazutaka YOKOTA
c395939120 Rework the ISA PnP driver pnp and the PnP resource parser to fix
the following bugs.

- When constructing a resource configuration, respect the order
  in which resource descriptors are read, in order to establish
  the correct mapping between the descriptors and configuration
  registers.
  "Plug and Play ISA Specification, Version 1.0a", Sec 4.6.1, May 5,
  1994.  "Clarifications to the Plug and Play ISA Specification,
  Version 1.0a", Sec 6.2.1, Dec. 10, 1994.

- Do not ignore null (empty) descriptors; they are valid descriptors
  acting as filler.
  "Clarifications to the Plug and Play ISA Specification, Version 1.0a",
  Sec 6.2.1.

- Correctly set up logical device configuration registers for null
  resources.
  "Clarifications to the Plug and Play ISA Specification, Version 1.0a"

- Handle null resources properly in the resource allocator for the
  ISA bus.
2001-09-05 03:54:33 +00:00
Kazutaka YOKOTA
7abb46623b Add a new field, id_config_attr to the struct isa_device.
It will be later used to store some flags to control PnP device
configurations.
2001-09-03 09:45:41 +00:00
Mike Smith
2e5bbc3fed Safety-check against empty PnP ID lists. 2001-08-30 09:14:28 +00:00
Julian Elischer
3b82ede012 DO NOT ALLOCATE 2+K OBJECTS ON THE KERNEL STACK!!!!
found by: Getting my u-area overwritten
2001-08-10 07:50:14 +00:00
Mike Smith
5aea03b06b It's possible for an ISA bus to be hung off an EISA bridge, so we need to
reflect that here.
2000-12-12 23:33:29 +00:00
David Malone
7cc0979fd6 Convert more malloc+bzero to malloc+M_ZERO.
Submitted by:	josh@zipperup.org
Submitted by:	Robert Drehmel <robd@gmx.net>
2000-12-08 21:51:06 +00:00
Poul-Henning Kamp
959b7375ed Staticize some malloc M_ instances. 2000-12-08 20:09:00 +00:00
Matthew N. Dodd
1581afb38d Reduce code duplication by using the GET_RESOURCE_LIST bus method and related
generic resource_list management functions.

I'll deal with the EISA bits later.

Not objected to by:	 new-bus
2000-11-28 07:12:12 +00:00
John Baldwin
2b2b44c983 Don't assume that any ISA device that fails to probe is a PnP device,
instead, use the bus_print_child_* functions to display the error message.
Also, since this is more of a warning than an error, hide it behind
bootverbose.

Similarly, if isa_assign_resources() fails to allocate resources to a
device, use bus_print_child_header() instead of device_printf(), and
display the resources that could not be allocated if bootverbose is true.

Approved by:	msmith
Help from:	mdodd
2000-07-12 00:42:08 +00:00
Doug Rabson
328d36e934 Replace the unknown driver with a nomatch method in the isa driver.
This allows ISA PnP drivers to be dynamically loaded after the kernel
has booted.
2000-06-25 09:19:02 +00:00
Mike Smith
208cc52f94 When allocating resources in the following cases:
- trying for a fit for a PnP configuration from a device
 - soaking up resources from a configuration that were not allocated by
   the driver

do not attempt to activate them.  Only a device driver that is aware of
the nature of the resource and its suitability can be certain that
activating a resource, particularly a memory resource, is a safe thing
to do.

This was prompted by the discovery that many systems report all physical
memory through a PNP0c02 device; activating this resource maps all
physical memory into the kernel's virtual space, either blowing out the
kernel pagetable or in the worst case causing a panic in pmap_mapdev()
if the system has too much physical memory.

Authorised by:	jkh
Reviewed by:	dfr
2000-02-11 04:35:07 +00:00
Mike Smith
01fef73008 Don't mark unallocated resources as active; the goal is to reserve them,
and there may be a good reason for them being unallocated (eg. they're
nonsensical or not useful).  The goal here is simply to reserve them
against accidental use by other code.
2000-01-18 02:15:05 +00:00
Matthew N. Dodd
fe0d408987 Remove the 'ivars' arguement to device_add_child() and
device_add_child_ordered().  'ivars' may now be set using the
device_set_ivars() function.

This makes it easier for us to change how arbitrary data structures are
associated with a device_t.  Eventually we won't be modifying device_t
to add additional pointers for ivars, softc data etc.

Despite my best efforts I've probably forgotten something so let me know
if this breaks anything.  I've been running with this change for months
and its been quite involved actually isolating all the changes from
the rest of the local changes in my tree.

Reviewed by:	peter, dfr
1999-12-03 08:41:24 +00:00
Peter Wemm
5ab0514321 Allow NULL for startp and/or countp in bus_get_resource() so that you can
get one of the two without having to use a dummy variable.
1999-11-20 14:56:55 +00:00
Doug Rabson
ec22663bed Reorganise the code so that I can add custom identify drivers dynamically
during autoconfig to support strange hardware (such as the Yamaha DS-1)
which implements 'legacy' ISA devices as well as a PCI device. This will
allow the PCI driver for the YMF724 to add the legacy devices to the ISA
bus and will allow the PnP system to automatically allocate the resources
for those devices.
1999-11-11 16:48:00 +00:00
Doug Rabson
25afb89b1c * Add struct resource_list* argument to resource_list_alloc and
resource_list_release. This removes the dependancy on the
  layout of ivars.

* Move set_resource, get_resource and delete_resource from
  isa_if.m to bus_if.m.

* Simplify driver code by providing wrappers to those methods:

     bus_set_resource(dev, type, rid, start, count);
     bus_get_resource(dev, type, rid, startp, countp);
     bus_get_resource_start(dev, type, rid);
     bus_get_resource_count(dev, type, rid);
     bus_delete_resource(dev, type, rid);

* Delete isa_get_rsrc and use bus_get_resource_start instead.

* Fix a stupid typo in isa_alloc_resource reported by Takahashi
  Yoshihiro <nyan@FreeBSD.org>.

* Print a diagnostic message if we can't assign resources to a PnP
  device.

* Change device_print_prettyname() so that it doesn't print
  "(no driver assigned)-1" for anonymous devices.
1999-10-12 21:35:51 +00:00
Doug Rabson
a2e6dbb39d Disable pnp devices before running heuristic probes. This allows us to
'hide' those devices from those probes so that they don't get probed and
then re-probed later when the pnp probe is run.
1999-10-03 12:13:06 +00:00
Doug Rabson
062acdb7e7 Change isa_get/set_flags() to device_get/set_flags(). 1999-09-07 08:42:49 +00:00
Doug Rabson
2aadbbb680 Only set the description if there is one in the matching isa_pnp_id. 1999-09-04 14:43:35 +00:00
Doug Rabson
4249382df0 This represents essentially a complete rewrite of the ISA PnP code. The
new system is integrated with the ISA bus code more cleanly and allows
the future addition of more enumerators such as PnPBIOS and ACPI.

This commit also enables the new pcm driver since it is somewhat tied to
the new PnP code.
1999-09-01 20:53:43 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Matthew N. Dodd
f4e3b1e7dd Fix a typo.
Back out a few lines that I haven't dealt with properly yet.

Snickered at by: Mike Smith
1999-07-29 01:51:49 +00:00
Matthew N. Dodd
15317dd875 Alter the behavior of sys/kern/subr_bus.c:device_print_child()
- device_print_child() either lets the BUS_PRINT_CHILD
	  method produce the entire device announcement message or
	  it prints "foo0: not found\n"

Alter sys/kern/subr_bus.c:bus_generic_print_child() to take on
the previous behavior of device_print_child() (printing the
"foo0: <FooDevice 1.1>" bit of the announce message.)

Provide bus_print_child_header() and bus_print_child_footer()
to actually print the output for bus_generic_print_child().
These functions should be used whenever possible (unless you can
just use bus_generic_print_child())

The BUS_PRINT_CHILD method now returns int instead of void.

Modify everything else that defines or uses a BUS_PRINT_CHILD
method to comply with the above changes.

	- Devices are 'on' a bus, not 'at' it.
	- If a custom BUS_PRINT_CHILD method does the same thing
	  as bus_generic_print_child(), use bus_generic_print_child()
	- Use device_get_nameunit() instead of both
	  device_get_name() and device_get_unit()
	- All BUS_PRINT_CHILD methods return the number of
	  characters output.

Reviewed by: dfr, peter
1999-07-29 01:03:04 +00:00
Doug Rabson
cfa84f4631 * Add ivars for ISA pnp.
* Move isa_dma* declarations to isavar.h.
* Add a method ISA_DELETE_RESOURCE() to the ISA interface.
* Tidy up include protection defines.
1999-05-30 11:02:17 +00:00
Doug Rabson
bea6af4d31 * Change device_add_child_after() to device_add_child_ordered() which is
easier to use and more flexible.
* Change BUS_ADD_CHILD to take an order argument instead of a place.
* Define a partial ordering for isa devices so that sensitive devices are
  probed before non-sensitive ones.
1999-05-28 09:25:16 +00:00
Doug Rabson
a3be63b3ce * Factor out the common code between the isa bus drivers for i386 and alpha.
* Re-work the resource allocation code to use helper functions in subr_bus.c.
* Add simple isa interface for manipulating the resource ranges which can be
  allocated and remove the code from isa_write_ivar() which was previously
  used for this purpose.
1999-05-22 15:18:28 +00:00