Now when a lib is marked as PRIVATELIB it is renamed into libprivate$foo instead
of being installed in /usr/lib/private and playing with rpath.
Also allow to install headers for PRIVATELIBS in that case the headers will be
installed in /usr/include/private/$foo
Keep the headers under a private namespace to prevent third party build system
to easily find them to ensure they are only used on purpose.
This allows for non base applications to statically link against a library in
base which is linked to a privatelib
Treating PRIVATELIBS as regular libraries allows to push them into our current
compatX packages if needed.
While here finish promotion of libevent as PRIVATELIB
Install header for bsdstat and libucl
Differential Revision: https://reviews.freebsd.org/D2365
Reviewed by: brooks, des
Discussed with: imp
pwrite(2) syscalls are wrapped to provide compatibility with pre-7.x
kernels which required padding before the off_t parameter. The
fcntl(2) contains compatibility code to handle kernels before the
struct flock was changed during the 8.x CURRENT development. The
shims were reasonable to allow easier revert to the older kernel at
that time.
Now, two or three major releases later, shims do not serve any
purpose. Such old kernels cannot handle current libc, so revert the
compatibility code.
Make padded syscalls support conditional under the COMPAT6 config
option. For COMPAT32, the syscalls were under COMPAT6 already.
Remove WITHOUT_SYSCALL_COMPAT build option, which only purpose was to
(partially) disable the removed shims.
Reviewed by: jhb, imp (previous versions)
Discussed with: peter
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
case
Repro is as follows:
% sudo pkg install -y kyua
% sudo rm -Rf /usr/tests
% sudo make hier
% (cd lib/libthr/tests/; make obj; make depend; make all; sudo make install)
% (cd /usr/tests/lib/libthr; kyua list)
Failure seen in Jenkins build starting here:
https://jenkins.freebsd.org/job/FreeBSD_HEAD-tests2/927/
Pointyhat to: bapt
Consumers should not need to encode fifolog's dependency on libz.
Handle it automatically in src.libnames.mk.
Differential Revision: https://reviews.freebsd.org/D2278
Reviewed by: bapt
Sponsored by: The FreeBSD Foundation
While here fix missing link to libbsdxml for libmt
Fix overlinking in mt(1)
Make add an indirect libmt dependency on bsdxml to allow static linking if
needed
to dtrace(1) invocations during a build. This change includes -C in the
default flags, which has dtrace(1) run input scripts through the
preprocessor. While here, sort the definitions of CP and CPP in sys.mk.
Differential Revision: https://reviews.freebsd.org/D2204
Reviewed by: imp, rpaulo (previous revision)
dependent functions have been implemented, but this is enough for world.
Differential Revision: https://reviews.freebsd.org/D2132
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
any defaults or user specified actions on the command line. This would
be useful for specifying features that are always broken or that
cannot make sense on a specific architecture, like ACPI on pc98 or
EISA on !i386 (!x86 usage of EISA is broken and there's no supported
hardware that could have it in any event). Any items in
__ALWAYS_NO_OPTIONS are forced to "no" regardless of other settings.
Differential Revision: https://reviews.freebsd.org/D2011
(this has to be passed as a combination of two flags). Should fix the
case where the clang version is before 3.5.0.
Submitted by: Pedro Arthur <bygrandao@gmail.com>
X-MFC-With: r279018, r279378
only adds support for kernel-toolchain, however it is expected further
changes to add kernel and userland support will be committed as they are
reviewed.
As our copy of binutils is too old the devel/aarch64-binutils port needs
to be installed to pull in a linker.
To build either TARGET needs to be set to arm64, or TARGET_ARCH set to
aarch64. The latter is set so uname -p will return aarch64 as existing
third party software expects this.
Differential Revision: https://reviews.freebsd.org/D2005
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
This fixes C++ libraries not implicitly linking in libc++. This is
generally not an issue because the final linking with the compiled binary
will involve CXX via PROG_CXX or other means. It is however
inconsistent with libraries implicitly linking in libc and problematic
for trying to build libraries with '-z defs' to ensure all direct
dependencies are linked in.
libatf-c++ is currently the only consumer of this new feature.
Differential Revision: https://reviews.freebsd.org/D2039
Reviewed by: imp
Discussed with: bapt
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
The compilation lines are not hidden and there is not much reason to
hide the linker line. It is useful to see.
Discussed at: https://reviews.freebsd.org/D2039
MFC after: 2 weeks
Using multi variable for loop not only simplify the code, it also ensures that
the LINKS and SYMLINKS input have the right number of words
Differential Revision: https://reviews.freebsd.org/D2069
Reviewed by: imp
which includes more than one file with the same name, in different
directories.
For example, setting:
SRCS+= foo/foo.c bar/foo.c baz/foo.c
will now create separate objdirs 'foo', 'bar' and 'baz' for each of the
sources in the list, and use those objdirs for the corresponding object
files.
Reviewed by: brooks, imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D1984
any defaults or user specified actions on the command line. This would
be useful for specifying features that are always broken or that
cannot make sense on a specific architecture, like ACPI on pc98 or
EISA on !i386 (!x86 usage of EISA is broken and there's no supported
hardware that could have it in any event). Any items in
BROKEN_OPTIONS are forced to "no" regardless of other settings.
Clients are expected change BROKEN_OPTIONS with +=. It will not
be unset, so other parts of the build system can have visibility
into the options that are broken on this platform, though this
should be very rare.
Differential Revision: https://reviews.freebsd.org/D2009
libgeom do so successfully
Tested by running `geom part list` produced from a -DWITHOUT_DYNAMICROOT built
world
PR: 198078
Reported by: Eir Nym <eirnym@gmail.com>
replace it with the absolute path of .PARSEDIR, so that sub-makes
launched from objdirs (eg kernel) can still find the correct mk files.
Reviewed by: obrien
The primary focus of these changes is to modernize FreeBSD's
tape infrastructure so that we can take advantage of some of the
features of modern tape drives and allow support for LTFS.
Significant changes and new features include:
o sa(4) driver status and parameter information is now exported via an
XML structure. This will allow for changes and improvements later
on that will not break userland applications. The old MTIOCGET
status ioctl remains, so applications using the existing interface
will not break.
o 'mt status' now reports drive-reported tape position information
as well as the previously available calculated tape position
information. These numbers will be different at times, because
the drive-reported block numbers are relative to BOP (Beginning
of Partition), but the block numbers calculated previously via
sa(4) (and still provided) are relative to the last filemark.
Both numbers are now provided. 'mt status' now also shows the
drive INQUIRY information, serial number and any position flags
(BOP, EOT, etc.) provided with the tape position information.
'mt status -v' adds information on the maximum possible I/O size,
and the underlying values used to calculate it.
o The extra sa(4) /dev entries (/dev/saN.[0-3]) have been removed.
The extra devices were originally added as place holders for
density-specific device nodes. Some OSes (NetBSD, NetApp's OnTap
and Solaris) have had device nodes that, when you write to them,
will automatically select a given density for particular tape drives.
This is a convenient way of switching densities, but it was never
implemented in FreeBSD. Only the device nodes were there, and that
sometimes confused users.
For modern tape devices, the density is generally not selectable
(e.g. with LTO) or defaults to the highest availble density when
the tape is rewritten from BOT (e.g. TS11X0). So, for most users,
density selection won't be necessary. If they do need to select
the density, it is easy enough to use 'mt density' to change it.
o Protection information is now supported. This is either a
Reed-Solomon CRC or CRC32 that is included at the end of each block
read and written. On write, the tape drive verifies the CRC, and
on read, the tape drive provides a CRC for the userland application
to verify.
o New, extensible tape driver parameter get/set interface.
o Density reporting information. For drives that support it,
'mt getdensity' will show detailed information on what formats the
tape drive supports, and what formats the tape drive supports.
o Some mt(1) functionality moved into a new mt(3) library so that
external applications can reuse the code.
o The new mt(3) library includes helper routines to aid in parsing
the XML output of the sa(4) driver, and build a tree of driver
metadata.
o Support for the MTLOAD (load a tape in the drive) and MTWEOFI
(write filemark immediate) ioctls needed by IBM's LTFS
implementation.
o Improve device departure behavior for the sa(4) driver. The previous
implementation led to hangs when the device was open.
o This has been tested on the following types of drives:
IBM TS1150
IBM TS1140
IBM LTO-6
IBM LTO-5
HP LTO-2
Seagate DDS-4
Quantum DLT-4000
Exabyte 8505
Sony DDS-2
contrib/groff/tmac/doc-syms,
share/mk/bsd.libnames.mk,
lib/Makefile,
Add libmt.
lib/libmt/Makefile,
lib/libmt/mt.3,
lib/libmt/mtlib.c,
lib/libmt/mtlib.h,
New mt(3) library that contains functions moved from mt(1) and
new functions needed to interact with the updated sa(4) driver.
This includes XML parser helper functions that application writers
can use when writing code to query tape parameters.
rescue/rescue/Makefile:
Add -lmt to CRUNCH_LIBS.
src/share/man/man4/mtio.4
Clarify this man page a bit, and since it contains what is
essentially the mtio.h header file, add new ioctls and structure
definitions from mtio.h.
src/share/man/man4/sa.4
Update BUGS and maintainer section.
sys/cam/scsi/scsi_all.c,
sys/cam/scsi/scsi_all.h:
Add SCSI SECURITY PROTOCOL IN/OUT CDB definitions and CDB building
functions.
sys/cam/scsi/scsi_sa.c
sys/cam/scsi/scsi_sa.h
Many tape driver changes, largely outlined above.
Increase the sa(4) driver read/write timeout from 4 to 32
minutes. This is based on the recommended values for IBM LTO
5/6 drives. This may also avoid timeouts for other tape
hardware that can take a long time to do retries and error
recovery. Longer term, a better way to handle this is to ask
the drive for recommended timeout values using the REPORT
SUPPORTED OPCODES command. Modern IBM and Oracle tape drives
at least support that command, and it would allow for more
accurate timeout values.
Add XML status generation. This is done with a series of
macros to eliminate as much duplicate code as possible. The
new XML-based status values are reported through the new
MTIOCEXTGET ioctl.
Add XML driver parameter reporting, using the new MTIOCPARAMGET
ioctl.
Add a new driver parameter setting interface, using the new
MTIOCPARAMSET and MTIOCSETLIST ioctls.
Add a new MTIOCRBLIM ioctl to get block limits information.
Add CCB/CDB building routines scsi_locate_16, scsi_locate_10,
and scsi_read_position_10().
scsi_locate_10 implements the LOCATE command, as does the
existing scsi_set_position() command. It just supports
additional arguments and features. If/when we figure out a
good way to provide backward compatibility for older
applications using the old function API, we can just revamp
scsi_set_position(). The same goes for
scsi_read_position_10() and the existing scsi_read_position()
function.
Revamp sasetpos() to take the new mtlocate structure as an
argument. It now will use either scsi_locate_10() or
scsi_locate_16(), depending upon the arguments the user
supplies. As before, once we change position we don't have a
clear idea of what the current logical position of the tape
drive is.
For tape drives that support long form position data, we
read the current position and store that for later reporting
after changing the position. This should help applications
like Bacula speed tape access under FreeBSD once they are
modified to support the new ioctls.
Add a new quirk, SA_QUIRK_NO_LONG_POS, that is set for all
drives that report SCSI-2 or older, as well as drives that
report an Illegal Request type error for READ POSITION with
the long format. So we should automatically detect drives
that don't support the long form and stop asking for it after
an initial try.
Add a partition number to the sa(4) softc.
Improve device departure handling. The previous implementation
led to hangs when the device was open.
If an application had the sa(4) driver open, and attempted to
close it after it went away, the cam_periph_release() call in
saclose() would cause the periph to get destroyed because that
was the last reference to it. Because destroy_dev() was
called from the sa(4) driver's cleanup routine (sacleanup()),
and would block waiting for the close to happen, a deadlock
would result.
So instead of calling destroy_dev() from the cleanup routine,
call destroy_dev_sched_cb() from saoninvalidate() and wait for
the callback.
Acquire a reference for devfs in saregister(), and release it
in the new sadevgonecb() routine when all devfs devices for
the particular sa(4) driver instance are gone.
Add a new function, sasetupdev(), to centralize setting
per-instance devfs device parameters instead of repeating the
code in saregister().
Add an open count to the softc, so we know how many
peripheral driver references are a result of open
sessions.
Add the D_TRACKCLOSE flag to the cdevsw flags so
that we get a 1:1 mapping of open to close calls
instead of a N:1 mapping.
This should be a no-op for everything except the
control device, since we don't allow more than one
open on non-control devices.
However, since we do allow multiple opens on the
control device, the combination of the open count
and the D_TRACKCLOSE flag should result in an
accurate peripheral driver reference count, and an
accurate open count.
The accurate open count allows us to release all
peripheral driver references that are the result
of open contexts once we get the callback from devfs.
sys/sys/mtio.h:
Add a number of new mt(4) ioctls and the requisite data
structures. None of the existing interfaces been removed
or changed.
This includes definitions for the following new ioctls:
MTIOCRBLIM /* get block limits */
MTIOCEXTLOCATE /* seek to position */
MTIOCEXTGET /* get tape status */
MTIOCPARAMGET /* get tape params */
MTIOCPARAMSET /* set tape params */
MTIOCSETLIST /* set N params */
usr.bin/mt/Makefile:
mt(1) now depends on libmt, libsbuf and libbsdxml.
usr.bin/mt/mt.1:
Document new mt(1) features and subcommands.
usr.bin/mt/mt.c:
Implement support for mt(1) subcommands that need to
use getopt(3) for their arguments.
Implement a new 'mt status' command to replace the old
'mt status' command. The old status command has been
renamed 'ostatus'.
The new status function uses the MTIOCEXTGET ioctl, and
therefore parses the XML data to determine drive status.
The -x argument to 'mt status' allows the user to dump out
the raw XML reported by the kernel.
The new status display is mostly the same as the old status
display, except that it doesn't print the redundant density
mode information, and it does print the current partition
number and position flags.
Add a new command, 'mt locate', that will supersede the
old 'mt setspos' and 'mt sethpos' commands. 'mt locate'
implements all of the functionality of the MTIOCEXTLOCATE
ioctl, and allows the user to change the logical position
of the tape drive in a number of ways. (Partition,
block number, file number, set mark number, end of data.)
The immediate bit and the explicit address bits are
implemented, but not documented in the man page.
Add a new 'mt weofi' command to use the new MTWEOFI ioctl.
This allows the user to ask the drive to write a filemark
without waiting around for the operation to complete.
Add a new 'mt getdensity' command that gets the XML-based
tape drive density report from the sa(4) driver and displays
it. This uses the SCSI REPORT DENSITY SUPPORT command
to get comprehensive information from the tape drive about
what formats it is able to read and write.
Add a new 'mt protect' command that allows getting and setting
tape drive protection information. The protection information
is a CRC tacked on to the end of every read/write from and to
the tape drive.
Sponsored by: Spectra Logic
MFC after: 1 month
probes to userland programs and libraries without also needing to link
libelf.
dtrace -G places the __SUNW_dof symbol at the beginning of the DOF (DTrace
probe and provider metdata) section in the generated object file; drti.o
now just uses this symbol to locate the section. A complication occurs
when multiple dtrace-generated object files are linked together, since the
__SUNW_dof symbol defined in each file is global. This is handled by
using objcopy(1) to convert __SUNW_dof to a local symbol once drti.o has
been linked with the generated object file. Upstream, this is done using a
linker feature not present in GNU ld.
Differential Revision: https://reviews.freebsd.org/D1757
Reviewed by: rpaulo
MFC after: 1 month
Relnotes: yes
libarchive(3) doesn't support the new liblzma API yet, but this change
allows us to enable multi-threaded xz compression.
``make release'' should now finish in half the time on a machine with
several cores and fast disks (our typical build server).
This behaviour only applies when building a release and it doesn't
affect buildworld/installworld. To disable threaded xz compression,
set XZ_THREADS=1.
Reviewed by: gjb
Tested by: gjb
SHLIB_NAME_FULL so that the full binary is relinked when a dependency
changes. Right now the existing full binary is left as-is and only
the objcopy to remove debug symbols is run.
Differential Revision: https://reviews.freebsd.org/D1834
Reviewed by: emaste
MFC after: 3 days
update paths; and include everything in the "base" distribution.
The "games" distribution being optional made sense when there were more
games and we had small disks; but the "games-like" games were moved into
the ports tree a dozen years ago and the remaining "utility-like" games
occupy less than 0.001% of my laptop's small hard drive. Meanwhile every
new user is confronted by the question "do you want games installed" when
they they try to install FreeBSD.
The next steps will be:
2. Removing punch card (bcd, ppt), phase-of-moon (pom), clock (grdc), and
caesar cipher (caesar, rot13) utilities. I intend to keep fortune, factor,
morse, number, primes, and random, since there is evidence that those are
still being used.
3. Merging src/games into src/usr.bin.
This change will not be MFCed.
Reviewed by: jmg
Discussed at: EuroBSDCon
Approved by: gjb (release-affecting changes)
This brings support for multi-threaded compression. This brings close
N times faster compression where N is the number of CPU cores.
Because of this, liblzma now depends on libthr.
Soon libarchive will be modified to use the new lzma API.
Thanks to antoine@ for the exp-run.
Differential Revision: https://reviews.freebsd.org/D1786
Reviewed by: bapt
allows the user to request administrative changes to individual devices
such as attach or detaching drivers or disabling and re-enabling devices.
- Add a new /dev/devctl2 character device which uses ioctls for device
requests. The ioctls use a common 'struct devreq' which is somewhat
similar to 'struct ifreq'.
- The ioctls identify the device to operate on via a string. This
string can either by the device's name, or it can be a bus-specific
address. (For unattached devices, a bus address is the only way to
locate a device.) Bus drivers register an eventhandler to claim
unrecognized device names that the driver recognizes as a valid address.
Two buses currently support addresses: ACPI recognizes any device
in the ACPI namespace via its full path starting with "\" and
the PCI bus driver recognizes an address specification of
'pci[<domain>:]<bus>:<slot>:<func>' (identical to the PCI selector
strings supported by pciconf).
- To make it easier to cut and paste, change the PnP location string
in the PCI bus driver to output a full PCI selector string rather
than 'slot=<slot> function=<func>'.
- Add a devctl(3) interface in libdevctl which provides a wrapper around
the ioctls and is the preferred interface for other userland code.
- Add a devctl(8) program which is a simple wrapper around the requests
supported by devctl(3).
- Add a device_is_suspended() function to check DF_SUSPENDED.
- Add a resource_unset_value() function that can be used to remove a
hint from the kernel environment. This is used to clear a
hint.<driver>.<unit>.disabled hint when re-enabling a boot-time
disabled device.
Reviewed by: imp (parts)
Requested by: imp (changing PCI location string)
Relnotes: yes
__attribute__((format(...))), and the -fformat-extensions flag was
removed, introduce a new macro in bsd.sys.mk to choose the right variant
of compile flag for the used compiler, and use it.
Also add something similar to kern.mk, since including bsd.sys.mk from
that file will anger Warner. :-)
Note that bsd.sys.mk does not support the MK_FORMAT_EXTENSIONS knob used
in kern.mk, since that knob is only available in kern.opts.mk, not in
src.opts.mk. We might want to add it later, to more easily support
external compilers for building world (in particular, sys/boot).
triggers way too many times for the version of libc++ we have in base at
this point. While here, fix the compiler version check for
-Wno-unused-const-variable.
use floating point hardware instructions (because all armv6/7 systems we
support have fp hardware), but it passes args using a soft-float compatible
ABI. This should give noticible performance improvement (but not as much
as using the armv6hf arch).
Some users build FreeBSD as non-root in Perforce workspaces. By default,
Perforce sets files read-only unless they're explicitly being edited.
As a result, the -f argument must be used to cp in order to override the
read-only flag when copying source files to object directories. Bare use of
'cp' should be avoided in the future.
Update all current users of 'cp' in the src tree.
Reviewed by: emaste
MFC after: 1 week
Sponsored by: Spectra Logic
These tools are now from the ELF Tool Chain project:
* addr2line
* elfcopy (strip)
* nm
* size
* strings
The binutils versions are available by setting in src.conf:
WITHOUT_ELFTOOLCHAIN_TOOLS=yes
Thanks to antoine@ for multiple exp-runs and diagnosing many of the
failures.
PR: 195561 (ports exp-run)
Sponsored by: The FreeBSD Foundation
As a side-effect now info pages will always be built/installed if
MK_INFO == yes, whereas before their presence was conditional based on the
value of MK_INFO
This .mk file might be removed in the future, pending discussion on -arch. For
now unbreak its use outside of src (with the only use in ports according to
bapt being devel/cvs*)
X-MFC with: r276551, r276556
Reviewed by: bapt
Differential Revision: D1413
raft of new warnings that appear to be on by default in clang 3.5.0.
Fix RPI-B build issues with new clang not liking the ability to pass
arbitrary flags to as, since some flags are more arbitrary (and thus
verboten) than others.
These warnings should be actually fixed in the code, but this is a
band-aide to get things (almost) building again.
Recent binutils considered the .gnu.warning.symbol section as a fatal error when
run with --fatal-warnings which makes any users of "insecure" functions from
libc failing to build with recent binutils.
Introduce a new macro: LD_FATAL_WARNINGS=no to run ld(1) with
--no-fatal-warnings for the users of "insecure" functions
Differential Revision: https://reviews.freebsd.org/D1320
support, make this explicit in src.opts.mk, by updating the default
settings.
The defaults become as follows:
* If the host compiler is not C++11 capable, use gcc and disable clang.
* On x86, enable clang, make it the default cc, and disable gcc.
* On little-endian ARM, enable clang, but not the full build, make it
the default cc, and disable gcc.
* On PowerPC, enable clang, but enable gcc and make that the default cc.
* On everything else, use gcc, and disable clang.
This can be amended later, if we get e.g. sparc64 or big-endian ARM
working with clang.
Reviewed by: imp, brooks
Differential Revision: https://reviews.freebsd.org/D1294
