configured in drivers.
Quote the last few args to form 1 arg. Quoting them in pairs almost
defeated the point of quoting them, which is to reduce the arg count
to <= 9.
Alpha. This is a minor, but important distinction. Should be a no-op
to the install base. If OBJFORMAT is set elsewhere, things work
exactly as they did before.
SCSI controllers, respectively.
Once these drivers are tested on the alpha, these man pages can probably be
moved up a directory to reflect the fact that they're architecture
independent.
An mdoc guru should probably look at the AUTHORS sections in both of these
pages -- the .An macro seems to cause strange spacing problems.
Reviewed by: ken
Submitted by: gibbs
as cam(4) as well.
This includes a description of all the generic CAM kernel options, as
well as a description of some of the CAM debugging printf options.
st(4) man page.
Take out most of the sd(4) and st(4) man pages and point to the new
da(4) and sa(4) man pages.
Add sa.4 to the makefile.
Reviewed by: ken
Submitted by: gibbs
driver, and point users in the right direction for similar functionality.
The functionality that used to be provided there is now provided by the
cd(4) driver and cdrecord.
Fix cross-references in a few other man pages. (i.e. delete references to
things I haven't written yet)
update of the quirk entry descriptions to reflect the current state of
things.
Once I find out where such things belong, I'll document things like
the changer scheduling mechanism, actions taken at probe, etc.
This includes a description of the changer timeout kernel options and
sysctl variables. I didn't check to make sure the ioctl descriptions are
up to date; that will come sometime later. (The ioctls haven't changed in
the CAM driver, but I'm not sure if the man page was in sync with even the
old driver.)
name conversion. Use it for binary ports that come with its own private
shlib dirs, ports that install linux compatibility libraries (thus following
their naming conventions and not ours), etc.
Reviewed by: Martin Cracauer <cracauer@FreeBSD.ORG>
though I'm afraid there's a lot more that needs fixing in this file,
judging by 'find /usr/src -name "*.8" -print'.
Spotted-by: glimpse -H /usr/src tickadj
Disable building tickadj(8) by removing util from SUBDIR in the xntpd
Makefile. Note that the sources are still there and tickadj can still
be built and installed by doing:
# cd /usr/src/usr.sbin/xntpd/util
# make all install
There are enough references to tickadj in e.g. the xntpd documentation
(not to mention the sysctl variables it uses etc.) that I don't feel
up to implementing the final solution right now.
Kinda-approved-by: phk
version number part (i.e., "<directory>/perl"). Use this to
substitute #! lines in your perl5 scripts.
Requested and reviewed by: ache
(2) Add new variable WRKDIRPREFIX (defaults to ""). The "work"
directories are now in ${WRKDIRPREFIX}${.CURDIR}/work by default.
You can have a read-only ports tree (modulo any broken ports that
write something to places other than ${WRKDIR}) by setting this to
a writable location.
Ports that set WRKDIR explicitly should append this to front so
they will work when the user has WRKDIRPREFIX set.
Reviewed by: Toshihiko Kodama <kodama@ayame.mfd.cs.fujitsu.co.jp>
SERVICE INTERNATIONAL DE LA ROTATION TERRESTRE
BUREAU CENTRAL DE L'IERS
OBSERVATOIRE DE PARIS
61, Av. de l'Observatoire 75014 PARIS (France)
Tel. : 33 (0) 1 40 51 22 26
FAX : 33 (0) 1 40 51 22 91
Internet : iers@obspm.fr
Paris, 17 July 1998
Bulletin C 16
To authorities responsible for
the measurement and distribution
of time
UTC TIME STEP
on the 1st of January 1999
A positive leap second will be introduced at the end of December 1998.
The sequence of dates of the UTC second markers will be:
1998 December 31, 23h 59m 59s
1998 December 31, 23h 59m 60s
1999 January 1, 0h 0m 0s
The difference between UTC and the International Atomic Time TAI is:
from 1997 July 1, 0h UTC, to 1999 January 1, 0h UTC : UTC-TAI = - 31s
from 1999 January 1, 0h UTC, until further notice : UTC-TAI = - 32s
Leap seconds can be introduced in UTC at the end of the months of
December or June, depending on the evolution of UT1-TAI. Bulletin C mailed
every six months, either to announce a time step in UTC, or to confirm that
there will be no time step at the next possible date.
Daniel GAMBIS
Director
Central Bureau of IERS
since ports are not supposed to be broken during the process of
conversion to ELF -- please proceed with caution.)
(2) Support for checking file size before fetching. The essential
parts are commented out for now, so I won't lose the submission
while we discuss how to do it.
Submitted by: se (mostly)
(3) Don't run "fetch" twice. It was due to the change in checksum
target chaining. It used to be fetch -> checksum -> extract,
after 1.285 it was fetch -> checksum and checksum was also
explicitly called from extract. Fix it by not calling fetch from
checksum when it's invoked by extract.
Noticed by: pre-fetch target of lesstif being run twice
(4) Don't try to remove non-existent distfiles and patchfiles in
distclean.
Submitted by: anto@netscape.net
PR: 7988
Submitted by: "Eugene M. Kim" <gene@nttlabs.com>
(2) Check for exact version of perl5 in /usr/bin and exit with error
message if USE_PERL5 is defined and version does not match
${PERL_VERSION}.
(3) Note LIB_DEPENDS should not have any regular expressions. Remove
those in USE_XLIB and USE_QT.
Host ATM Research Platform (HARP), Network Computing Services, Inc.
This software was developed with the support of the Defense Advanced
Research Projects Agency (DARPA).
Submitted by: hoek
(2) ELF support.
2a. Variable PORTOBJFORMAT specifies the object format of the system.
It is passed down to configure/make via CONFIGURE_ENV/MAKE_ENV,
and is given to generate-plist via PLIST_SUB.
2b. In PLIST, substitute lines that end with "/libFOO.so.X" with
"/libFOO.so.X.0". (This means PLISTs should only list ELF
libraries.)
Reviewed by: jb, jdp, hoek, jseger, steve
(3) Perl5-in-system support. Basically turns USE_PERL5 into a no-op
if there exists a "/usr/bin/perl5". Also fix prior breakage by
dima (${PREFIX} => ${LOCALBASE} in perl5 path).
Reviewed by: markm (sort of)
(4) Install requirement file as "+REQUIRE" so it will be executed
correctly by pkg_delete.
Reported by: Shigeyuki FUKUSHIMA <shige@kuis.kyoto-u.ac.jp>
(5) Do not disable checksum and makesum when NO_EXTRACT is set.
Pointed out by: hoek and kiri, among other people
src/lkm/Makefile.inc. This fixes broken builds of the syscons LKMs
when OBJFORMAT=elf. Removed src/lkm/Makefile.inc since it became
empty and is worse than useless.
the way, most of the things below are "Reviewed by: hoek" as well.)
The changes are (roughly in order of appearance):
(1) Revamp comments at beginning of file. Major rewrites. Reorder
them into more relevant sections. Make clear which ones are user
variables and not to be set in ports' Makefiles.
Reviewed by: hoek (well, he's the only one who sent any comments)
(2) Include ${.CURDIR}/Makefile.local if it exists. This is a local
configuration file (ala rc.conf.local and make.conf.local) so
please do not commit a file with this name to the repository.
Suggested by: dillon
(3) MANCOMPRESSED now takes three possible values: "yes", "no" and
"maybe". (It used to be a binary variable -- the old behavior is
now accomplished by "MANCOMPRESSED=yes". Ports that defined this
variable to other values have been corrected.)
"yes" means the manpages are installed compressed, "no" means they
are not, and "maybe" means the port already respects the value of
NOMANCOMPRESS. The default is "yes" for USE_IMAKE ports without
NO_INSTALL_MANPAGES, and "no" otherwise.
Add "compress-man" target and move manpage {,de}compression there.
Reviewed by: hoek etc. and a full build of the ports tree
(4) Add LIBDIR="${LIBDIR}" to MAKE_ENV. Makes easier to "fix" ports
for /usr/lib/aout mess.
Submitted by: ohashi@mickey.ai.kyutech.ac.jp (Takeshi Ohashi)
(5) Change ${TMPPLIST} from ${WRKDIR}/PLIST.mktmp to
${WRKDIR}/.PLIST.mktmp.
Suggested by: hoek
Strongly seconded by: steve
(6) Change a couple more relative pathnames to absolute ones.
Submitted by: hoek
(7) Move checksum into real-extract.
(8) Change way rules are chained. Instead of:
build: configure ${BUILD_COOKIE}
${BUILD_COOKIE}:
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-build
we now have
build: ${BUILD_COOKIE}
${BUILD_COOKIE}:
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} configure
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-build
Other than being more PC (pmake clean), this really speeds up
skipping ports already built. For instance, "make package" on a
fully packaged games subtree used to take 269 seconds on average,
now it's 45 seconds on average.
The flip side of this is that it will create more processes when
the targets actually chain, but when you're actually compiling
things, your make is creating half a bazzilion processes anyway so
I don't think it matters.
(9) ${TMPPLIST} is now a real dependency. Create "generate-plist"
target to generate ${TMPPLIST}. Make sure it's called when needed
(usually between do-install and post-install), and that the
required files exist.
(10) Change some messages so we can tell where "make index" failed.
(11) Check if LIB_DEPENDS really generated the required shared lib or
not.
Seconded by: "Brent J. Nordquist" <bjn@visi.com>
the diff is attached below. This is done on the 3.0 source-tree.
I have test this on 2.2-stable before, but I don't have a 3.0 machine
right now.
This patch is mainly to make libc support BIG5 encoding, thus add
zh_TW.BIG5 locale to 3.0.
Submitted by: Chen Hsiung Chan <frankch@waru.life.nthu.edu.tw>
I hope some other people might find them useful. They are for
zh_CN.EUC (GB) only. I'm not familiar with the BIG5 encoding,
so I could only hope someone else would fill the gap.
PR: 7310
Submitted by: Luoqi Chen <luoqi@chen.ml.org>
generic and should go one level up, but it can keep the sb(4) man
page company for now until somebody moves all the no-longer-x86-specific
driver man pages up some day.
Submitted by: luigi
when certain .mk files include other .mk files. This will remove the
need for multiple include protection in some other makefiles around the
tree (and helps some elf conditionals).
means (change PREFIX to ${X11BASE}) and add a new variable USE_X11
which means "this port requires the X window system (actually the
library)". USE_X_PREFIX implies USE_X11. USE_X11 adds a
LIB_DEPENDS to libX11 with the x11/XFree86 port.
Reviewed by: the ports list, hoek in particular
(2) Remove NO_CONFIGURE and NO_PATCH, which never meant anything.
Yell if they are defined.
Reviewed by: the ports list
(3) Add new variable OSREL, which is automatically set to the
numeric OS version (e.g., 2.2.1, 3.0). It can be used to refer to
files in gcc installations, for instance.
(4) Finally remove EXEC_DEPENDS hack after all these years.
Submitted by: hoek
(5) Put quotes around some echo ${*_DEPENDS} statements so they won't
blow up when the variables include regular expressions like
"qt\\.1\\.\\\(33\\\|40\\\):${PORTSDIR}/x11/qt140".
recently added definitions from sys.mk to bsd.own.mk. Include the
src-relative bsd.own.mk in src/Makefile to pick up all new definitions.
Don't check that MACHINE_ARCH is defined in src/Makefile, since it is
(and should have been) guaranteed to be defined.
...is expected to conform to IEEE (``POSIX'') Std 1003.1c when it is
published.
to:
...conforms to ISO/IEC 9945-1 ANSI/IEEE (``POSIX'') Std 1003.1 Second
Edition 1996-07-12.
Discussed with: jb
(mostly for includes) separate from direct dependencies (so that ${.ALLSRC}
can be used to find full paths to the sources for the direct dependencies
only). The `::' hack just forgot the indirect dependendencies. This
broke building doc/usd/13.viref with `make -jN' - the index got corrupted
by being built twice concurrently.
Cleaned up the ${DFILE} rule. There was a .else clause with dead code in
it following a .else clause (make accepts this bad syntax). ${.ALLSRC}
now works in the USE_SOELIMPP case. Some client Makefiles no longer need
the SRCDIR=${.OBJDIR} hack.
pthread_mutex routines. I've also tweaked pthread_create.3 to point to
pthread_cleanup_push(3) and pthread_cleanup_pop(3).
PR: 7450
Submitted by: Brian Cully <shmit@kublai.com>
`make world' to avoid problems with picking up (new) target or (stale)
host shared libraries.
Don't honor -static in LDFLAGS for linking LKMs. LDFLAGS is not
actually for ld, but we use it anyway, and must prevent -static being
misinterpreted as -s.
Don't hide any of the link steps.
some months ago and was incorporated to FreeBSD) has capitalized
weekdays names, but this is not correct according to the rules of the
Spanish language.
Also, the patch applies a small change to the "date_fmt" string, adding
a comma between the year and the hour.
PR: 7211
Submitted by: Jose M. Alcaide <jose@we.lc.ehu.es>
bootstrapped by `make world'. The version just built in ".."
normally won't work if the target system is not binary compatible.
Don't build or install anything if _BUILD_TOOLS is defined. Then
we only want to build and install the mklocale binary, but the layout
of the mklocale tree forces recursing to mklocale/data for at least
the obj target even when _BUILD_TOOLS is defined.
bootstrapped by `make world'. The version just built in ".."
normally won't work if the target system is not binary compatible.
Don't build or install anything if _BUILD_TOOLS is defined. Then
we only want to build and install the colldef binary, but the layout
of the colldef tree forces recursing to colldef/data for at least
the obj target even when _BUILD_TOOLS is defined.
Submitted by: Randall Hopper <rhh@ct.picker.com>
The patch supports using the X10 Mouse Remote in both stand-alone and
pass-through configurations, so you can plug your mouse and remote into the
same serial port, use the mouse for X, and use the remote for other apps
like Fxtv. For instance, we can now control fxtv via the remote control
just like a TV : change channels, mute, increase volume, zoom video,
freeze frame 8)
The mouse events are channeled through the syscons/sysmouse I/F like
normal, and the remote buttons are "syphoned off" to a UNIX-domain stream
socket (defined as _PATH_MOUSEREMOTE in <machine/mouse.h>) for a
remote-aware app to grab and use.
For further info on the X10 Mouse Remote see:
http://www.x10.com/products/x10_mk19a.htm
Move a.out libraries to /usr/lib/aout to make space for ELF libs.
Make rtld usr /usr/lib/aout as default library path.
Make ldconfig reject /usr/lib as an a.out library path.
Fix various Makefiles for LIBDIR!=/usr/lib breakage.
This will after a make world & reboot give a system that no
longer uses /usr/lib/*, infact one could remove all the old
libraries there, they are not used anymore.
We are getting close to an ELF make world, but I'll let this
all settle for a week or two...
passed to the user process for incoming packets. When the sockaddr_in
is passed back to the divert socket later, use thi sas the primary
interface lookup and only revert to the IP address when the name fails.
This solves a long standing bug with divert sockets:
When two interfaces had the same address (P2P for example) the interface
"assigned" to the reinjected packet was sometimes incorect.
Probably we should define a "sockaddr_div" to officially hold this
extended information in teh same manner as sockaddr_dl.
the right solution or not, bsd.port.mk is broken unless bsd.locale.mk
is installed.
Note that if LOCALE is not defined, port-building explodes:
"/usr/share/mk/bsd.locale.mk", line 135: if-less elif
"/usr/share/mk/bsd.locale.mk", line 135: Need an operator
(For each .if testing LOCALE)
Notes:
- We no longer use -fgnu-runtime in bsd.lib.mk, since it is the default
and bsd.lib.mk is the wrong place to override it.
- Gnu C doesn't have a special compiler driver for Objective C like it
does for C++. The defaults are suitable for Gnu C. Use `OBJCLIBS='
in /etc/make.conf for POC.
is used in the dependency list for ${DEPENDFILE}. `make depend' was
broken for a few days. `make world' only uses `make depend' when
NOCLEAN is defined, so only a few people noticed the bug.
Submitted by: mostly by jmg
bsd.obj.mk instead of bsd.dep.mk for defining the _SUBDIR target
and a default tags target. Abuse bsd.obj.mk for defining default
cleandepend and depend targets.
that want a y.tab.h file. This want must be specified by putting y.tab.h
in SRCS (and defaulting to or putting -d in YFLAGS). This only works if
there is only one yacc parser, of course. One improvement: copy y.tab.c
to foo.c instead of renaming it, so that `#line...y.tab.c' statements in
it refer to an existing file.
Regress to not generating explicit rules for .l and .y sources containing
slashes. This case is unusual and hard to handle properly.
Don't generate an unused dependency when -d is not in YFLAGS.
sources. This will be used to fix `make -jN' races in many
Makefiles in /usr/src, and to simplify these and other Makefiles.
To get the fixes and simplifications, application Makefiles should
put the raw lex and yacc source names (foo.l and bar.y) in SRCS and
not put the names of any generated files in SRCS or CLEANFILES. A
few Makefiles already do this, although it didn't actually work before
(mkdep couldn't create complete dependencies because there is no
intermediate .c file for the .y.o and .l.o implicit rules).
Complications: if bar.y is in SRCS and -d is in YFLAGS, then bar.h
will be generated whether or not it is used, even if this clobbers a
real source file. This is so that bar.c can be generated using the
-j-safe and debugger-friendly -o option to YACC. There are smaller
warts for handling y.tab.h. y.tab.c and lex.yy.c are not supported.
letters one pixel taller, and the ()[]{} are more distinct. Nice if
your monitor is small. 8x16 and 8x8 fonts included.
PR: 4208
Reviewed by: phk
Submitted by: Dan Nelson <dnelson@emsphone.com>
is reason enough to make the compilation & installation of sendmail an
make.conf option. I know that you hate negative options Bruce.
PR: 6284
Reviewed by: phk
Submitted by: Adrian Colley <aecolley@world.std.com>
