register, in addition to configuring it as input with the pinmux driver.
There was a control register bit commented as "no desc in datasheet". A
later revision of the manual reveals the bit to be an input/output control
for the timer pin. In addition to configuring capture or pulse mode, you
apparently have to separately configure the pin direction in the timer
control register.
Before this change, the timer block was apparently driving a signal onto a
pad configured by pinmux as input. Capture mode still accidentally worked
for me during testing because I was using a very strong signal source that
just out-muscled the weaker drive from the misconfigured pin.
An attempt to build mips64 using external toolchain failed as it tried
to use the host amd64 nm.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
* allocate an ext bit for fragment offload. Some NICs (like the ath10k
hardware in native wifi or 802.3 mode) support doing packet fragmentation
in firmware/hardware, so we don't have to do it here.
* allocate an ext bit for VHT and start using it.
* Although the hardware is awake, the power state handling doesn't think so.
So just explicitly wake it up early in setup so ath_hal calls don't complain.
* We shouldn't be transmitting or ACKing frames during DFS CAC or on passive
channels before we hear a beacon. So, start laying down comments in the
places where this work has to be done.
Note:
* The main bit missing from finishing this particular bit of work is a state
call to transition a VAP from passive to non-passive when a beacon is heard.
CAC is easy, it's an interface state. So, I'll go and add a method to control
that soon.
Recommit "Use ValueOffsetPair to enhance value reuse during SCEV
expansion".
The fix for PR28705 will be committed consecutively.
In D12090, the ExprValueMap was added to reuse existing value during
SCEV expansion. However, const folding and sext/zext distribution can
make the reuse still difficult.
A simplified case is: suppose we know S1 expands to V1 in
ExprValueMap, and
S1 = S2 + C_a
S3 = S2 + C_b
where C_a and C_b are different SCEVConstants. Then we'd like to
expand S3 as V1 - C_a + C_b instead of expanding S2 literally. It is
helpful when S2 is a complex SCEV expr and S2 has no entry in
ExprValueMap, which is usually caused by the fact that S3 is
generated from S1 after const folding.
In order to do that, we represent ExprValueMap as a mapping from SCEV
to ValueOffsetPair. We will save both S1->{V1, 0} and S2->{V1, C_a}
into the ExprValueMap when we create SCEV for V1. When S3 is
expanded, it will first expand S2 to V1 - C_a because of S2->{V1,
C_a} in the map, then expand S3 to V1 - C_a + C_b.
Differential Revision: https://reviews.llvm.org/D21313
Pull in r278161 from upstream llvm trunk (by Wei Mi):
Fix the runtime error caused by "Use ValueOffsetPair to enhance value
reuse during SCEV expansion".
The patch is to fix the bug in PR28705. It was caused by setting
wrong return value for SCEVExpander::findExistingExpansion. The
return values of findExistingExpansion have different meanings when
the function is used in different ways so it is easy to make mistake.
The fix creates two new interfaces to replace
SCEVExpander::findExistingExpansion, and specifies where each
interface is expected to be used.
Differential Revision: https://reviews.llvm.org/D22942
Pull in r281439 from upstream llvm trunk (by Wei Mi):
Create a getelementptr instead of sub expr for ValueOffsetPair if the
value is a pointer.
This patch is to fix PR30213. When expanding an expr based on
ValueOffsetPair, if the value is of pointer type, we can only create
a getelementptr instead of sub expr.
Differential Revision: https://reviews.llvm.org/D24088
This should fix assertion failures when building OpenCV >= 3.1, and also
allow building lang/spidermonkey24 without any further assertions.
PR: 215649
MFC after: 1 week
all of them in terms of an sbuf-based back-end, xpt_path_sbuf. This
unifies the implementation, but more importantly it stops the output
fropm being split between 4 or more invocations of printf. The
multiple invocations cause interleaving of the messages on the
console during boot, making the output of disk discovery often
unintelligible. This change helps a lot, but more work is needed.
Reviewed by: ken, mav
Sponsored by: Netflix
Commit r312747 ("Setup decoding windows for ARMADA38X") resulted
in build failing for Marvell platforms, which don't have AHCI controller.
This patch provides a fix by adding dummy functions for such cases.
On the occasion rename register dump routine to decode_win_ahci_dump,
in order to avoid confusion.
Submitted by: Marcin Wojtas <mw@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
- Replace pcpu_find(curcpu) with get_pcpu(), which is much
more direct.
- Remove armv4 pcpu fields which I added in r286296 but never
needed to use.
- armv6 pc_qmap_addr was leftover from the old armv6 pmap
implementation. Rename it and put it to use in the new one.
Noted by: skra
Reviewed by: skra
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D9312
under a shared read lock. This patch attempts to upgrade the lock to
an exclusive write lock. If the exclusive write lock fails to be
obtained, the current fragment is not placed at the head of the list.
This portion of the patch was inspired by NetBSD ip_frag.c r1.4 (which
effectively removed the section of code that performed the reordering).
The patch to sys/contrib/ipfilter/netinet/ip_compat.h adds the
MUTEX_TRY_UPGRADE macro to support the patch to ip_frag.c.
The patch to contrib/ipfilter/lib/rwlock_emul.c supports this patch
by emulating the mutex in userspace when exercised by ipftest(1).
Inspired by: NetBSD ip_frag.c r1.4
MFC after: 1 month
This calls ioctl() handlers for the different interfaces in the bridge.
These handlers expect to get called in an ioctl context where it's safe
for them to sleep. We may not sleep with the bridge lock held.
However, we still need to protect the interface list, to ensure it
doesn't get changed while we iterate over it.
Use BRIDGE_XLOCK(), which prevents bridge members from being removed.
Adding bridge members is safe, because it uses LIST_INSERT_HEAD().
This caused panics when adding xen interfaces to a bridge.
PR: 216304
Reviewed by: ae
MFC after: 1 week
Sponsored by: RootBSD
Differential Revision: https://reviews.freebsd.org/D9290
(intentionally) deleted first and then completely added again (so all the
events, announces and hooks are given a chance to run).
This cause an issue with CARP where the existing CARP data structure is
removed together with the last address for a given VHID, which will cause
a subsequent fail when the address is later re-added.
This change fixes this issue by adding a new flag to keep the CARP data
structure when an address is not being removed.
There was an additional issue with IPv6 CARP addresses, where the CARP data
structure would never be removed after a change and lead to VHIDs which
cannot be destroyed.
Reviewed by: glebius
Obtained from: pfSense
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (Netgate)
Taking closer look on my ASM1062 I found that it has bunch of issues around
error recovery: reported wrong CCS, failed commands reported as completed,
READ LOG EXT times out after NCQ error. This patch workarounds first two
problems, that were making ATAPI devices close to unusable on these HBAs.
MFC after: 2 weeks
Use ValueOffsetPair to enhance value reuse during SCEV expansion.
In D12090, the ExprValueMap was added to reuse existing value during
SCEV expansion. However, const folding and sext/zext distribution can
make the reuse still difficult.
A simplified case is: suppose we know S1 expands to V1 in
ExprValueMap, and
S1 = S2 + C_a
S3 = S2 + C_b
where C_a and C_b are different SCEVConstants. Then we'd like to
expand S3 as V1 - C_a + C_b instead of expanding S2 literally. It is
helpful when S2 is a complex SCEV expr and S2 has no entry in
ExprValueMap, which is usually caused by the fact that S3 is
generated from S1 after const folding.
In order to do that, we represent ExprValueMap as a mapping from SCEV
to ValueOffsetPair. We will save both S1->{V1, 0} and S2->{V1, C_a}
into the ExprValueMap when we create SCEV for V1. When S3 is
expanded, it will first expand S2 to V1 - C_a because of S2->{V1,
C_a} in the map, then expand S3 to V1 - C_a + C_b.
Differential Revision: https://reviews.llvm.org/D21313
This should fix assertion failures when building OpenCV >= 3.1.
PR: 215649
MFC after: 3 days
both the plt and non-plt case.
This fixes an issue where libraries built with LLD can fail with
"Unhandled relocation 1031"
PR: 214971
Obtained from: 1 week
Sponsored by: DARPA, AFRL
In r263232 sys/capability.h was renamed to sys/capsicum.h, to avoid
conflicts with a capability.h header found on other operating systems.
Sponsored by: The FreeBSD Foundation
success and a good value. Only then try to use it and set the MSIX_ENABLE
bit.
With the current em(4) driver we have observed failures in this case in a
specific environment when pci_find_cap() would not return the assumed
value, which meant we ended up writing to PCI register 2 (PCI_DEVICE_ID)
which is read-only.
PR: 216456
Submitted by: bz
This file provides support for AHCI mode on Armada38x
and adds new optional AHCI device to arm/mv/files.mv.
Submitted by: Konrad Adamczyk <ka@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: zbb
Differential revision: https://reviews.freebsd.org/D9222
It occurred that some Marvell integrated controllers
require additional time after soft reset to work properly.
Introduce new quirk (AHCI_Q_MRVL_SR_DEL), that enable
such operation.
Submitted by: Konrad Adamczyk <ka@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: mav
Differential revision: https://reviews.freebsd.org/D9221
It is necesarry to open memory windows on internal bus for
AHCI driver to work correctly.
Submitted by: Konrad Adamczyk <ka@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: zbb
Differential revision: https://reviews.freebsd.org/D9220
Configure decoding windows only for devices with
enabled nodes in FDT.
Submitted by: Konrad Adamczyk <ka@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Reviewed by: zbb
Differential revision: https://reviews.freebsd.org/D9219
