The original idea behind calling into the bridge driver was to have the
logic deciding whether tuning is actually required for a particular bus
timing in a given slot as well as doing the sanity checking only on the
controller layer which also generally is better suited for these due to
say SDHCI_SDR50_NEEDS_TUNING. On another thought, not every such driver
should need to check whether tuning is required at all, though, and not
everything is SDHCI in the first place.
Adjust sdhci{,_fsl_fdt}(4) accordingly, but keep sdhci_generic_tune() a
bit cautious still.
The physical address argument is essentially ignored by every dumper
method. In addition, the dump routines don't actually pass a real
address; every call to dump_append() passes a value of zero for
physical.
Reviewed by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D35173
In order to support various types of data stored in device
tree properties or ACPI _DSD packages, create a new enum so
the caller can specify the expected type of a property they
want to read, according to the binding. The bus logic will use
that information to process the underlying data.
For example in DT all integer properties are stored in BE format.
In order to get constant results across different platforms we
need to convert its endianness to match the host.
Another example are ACPI_TYPE_INTEGER properties stored
as uint64_t. Before this patch the ACPI logic would refuse
to read them if the provided buffer was smaller than 8 bytes.
Now this can be handled by using DEVICE_PROP_UINT32 type.
Modify the existing consumers of this API to reflect the changes
and update the man pages accordingly.
Reviewed by: mw
Obtained from: Semihalf
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D33457
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33822
EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33821
sddadump has been derived from sddastart.
mmc_sim interface has grown a new method, cam_poll, to support polled
operation.
mmc_sim code has been changed to provide a sim_poll hook only if the
controller implements the new method. The hooks is implemented in terms
of the new mmc_sim_cam_poll method.
Additionally, in-progress CCB-s now have CAM_REQ_INPROG status to
satisfy xpt_pollwait().
mmc_sim_cam_poll method has been implemented in dwmmc host controller.
Reviewed by: manu, mav, imp
MFC after: 2 weeks
Relnotes: perhaps
Differential Revision: https://reviews.freebsd.org/D33843
HS200 and HS400 speeds can be enabled either with 1.2, or 1.8V signaling voltage.
Because of that we have four cabability flags: MMC_CAP_MMC_HS200_120,
MMC_CAP_MMC_HS200_180, MMC_CAP_MMC_HS400_120, MMC_CAP_MMC_HS400_180.
MMC logic only enables HS200/HS400 mode if both flags are set for the corresponding speed.
Fix that by being more permissive in host timing cap check.
Reviewed by: manu, mw
MFC after: 2 weeks
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential revision: https://reviews.freebsd.org/D33130
We should reserve two descriptors (not MMC_SECTORS) for potentially
unaligned (so bounced) buffer fragments, one for the starting fragment
and one for the ending fragment.
Submitted by: kjopek@gmail.com
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D30387
The refactoring in 8a8166e5bc introduced a functional change that
breaks booting on the Stratix 10, hanging when it should be attaching
da0. Previously OF_getencprop was called with a pointer to host->f_max,
so if it wasn't present then the existing value was left untouched, but
after that commit it will instead clobber the value with 0. The dwmmc
driver, as used on the Stratix 10, sets a default value before calling
mmc_fdt_parse and so was broken by this functional change. It appears
that aw_mmc also does the same thing, so was presumably also broken on
some boards.
Fixes: 8a8166e5bc ("mmc: switch mmc_helper to device_ api")
Reviewed by: manu, mw
Differential Revision: https://reviews.freebsd.org/D32209
Write to the PWREN register should be done in update_ios based
on the power_mode value in the ios struct.
Also none of the manual (RockChip and Altera) and Linux talks about
the needed for an inverted PWREN value so just remove this.
This fixes eMMC (and possibly SD) when u-boot didn't setup the controller.
Reported by: avg
Tested-on: Rock64, RockPro64
Add generic mmc_helper which uses newly introduced device_*_property
api. Thanks to this change the sd/mmc drivers will be capable
of parsing both DT and ACPI description.
Ensure backward compatibility for all mmc_fdt_helper users.
Reviewed by: manu, mw
Sponsored by: Semihalf
Differential revision: https://reviews.freebsd.org/D31598
Reset the mmc owner before calling the bridge release host callback.
Some people are hitting the "mmc: host bridge didn't serialize us." panic as
the bridge is released before the mmc owner is reset.
Submitted by: luiz
Sponsored by: Rubicon Communications, LLC ("Netgate")
Buggy SD card drivers may attach and detach a mmc(4) driver instance in
quick succession. In this case mmc(4) must disestablish its intrhook
callback during detach. Thus, this change adds a call to
config_intrhook_drain(), which blocks or does nothing if the intrhook is
running or has already ran (the SD card was plugged in), and
disestablishes the hook if it hasn't ran yet (the SD card was not
plugged in).
PR: 254373
Reviewed by: imp, manu, markj
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31262
When using SDIO the block size if per function and most of the time
not equal to MMC_SECTOR_SIZE, fix sdio on dwmmc by setting the correct
block size in the mmc registers.
MFC after: 1 month
Sponsored by: Diablotin Systems
Now that the upper layers all go through a layer to tie into these
information functions that translates an sbuf into char * and len. The
current interface suffers issues of what to do in cases of truncation,
etc. Instead, migrate all these functions to using struct sbuf and these
issues go away. The caller is also in charge of any memory allocation
and/or expansion that's needed during this process.
Create a bus_generic_child_{pnpinfo,location} and make it default. It
just returns success. This is for those busses that have no information
for these items. Migrate the now-empty routines to using this as
appropriate.
Document these new interfaces with man pages, and oversight from before.
Reviewed by: jhb, bcr
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D29937
The need for !! over (bool) pre-dates gcc 4.2, so go with the patch
as-submitted because the kernel tends to prefer that.
Suggested by: emaste@
Sponsored by: Netflix
Currently, mmc_fdt_gpio_get_{present,readonly} return all time true.
true ^ 100b = true
false ^ 100b = true
since that's done after promotion to integers. Use !! to convert
the bit to a bool before xor.
Reviewed by: imp@ (converted to (bool) to !! for portability)
Pull Request: https://github.com/freebsd/freebsd-src/pull/461
Update mmc_switch_status to ignore a few CRC errrors when asking for the
card status after setting the new rate with CMD6. Since the card may
take a little while to make the switch, it's possible we'll get a
communications error if we sent the command at the wrong time. Several
low end laptops needs this workaround as they have a window that seems
longer than other systems. This is known to fix at least the Acer Aspire
A114-32-P7E5.
Reviewed by: imp@, manu@
Differential Revision: https://reviews.freebsd.org/D24740
This allow us to powerup/down the card and enabling/disabling the
regulators if any.
Sponsored by: Diablotin Systems
Differential Revision: https://reviews.freebsd.org/D30292
This helper can be used to enable/disable the regulator and starting
the power sequence of sd/sdio/eMMC cards.
Sponsored by: Diablotin Systems
Differential Revision: https://reviews.freebsd.org/D30291
If a sd/emmc node have a pwrseq property parse it and get the corresponding
driver.
This can later be used to powerup/powerdown the SDIO card or eMMC.
Sponsored by: Diablotin Systems
Differential Revision: https://reviews.freebsd.org/D30289
This driver is used to power up sdio card or eMMC.
It handle the reset-gpio, clocks and needed delays for powerup/powerdown.
Sponsored by: Diablotin Systems
Differential Revision: https://reviews.freebsd.org/D30288
A lot more generic cam related things are done in mmc_sim so this simplify
the driver a lot.
Differential Revision: https://reviews.freebsd.org/D27487
Reviewed by: kibab
- limit maximum segment size to 2048 bytes. Although dwmmc supports a buffer
fragment with a maximum length of 4095 bytes, use the nearest lower power
of two as the maximum fragment size. Otherwise, busdma create excessive
buffer fragments.
- fix off by one error in computation of the maximum data transfer length.
- in addition, reserve two DMA descriptors that can be used by busdma
bouncing. The beginning or end of the buffer can be misaligned.
- Don’t ignore errors passed to bus_dmamap_load() callback function.
- In theory, a DMA engine may be running at time when next dma descriptor is
constructed. Create a full DMA descriptor before OWN bit is set.
MFC after: 2 weeks
Remove two debugging printfs, even if hidden under boot -v.
They seemed to be of debug nature and always spit onto the
console when running camcontrol devlist -v.
Reviewed by: manu
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25962
If the fdt node doesn't have a cd-gpios properties or if the node is set
as non-removable we do not init the card detection timeout task as it is
useless so don't schedule it too.
MFC after: 1 month
X-MFC-With: r359924
the dts to find the supported speeds and the regulators.
Not all DTS have every settings properly defined so host controller
will still have to add some caps themselves.
It also add a mmc_fdt_gpio_setup function which will read the cd-gpios
property and register it as the CD pin.
If the pin support interrupts one will be registered and the cd_helper
function will be called.
If the pin doesn't support interrupts the internal taskqueue will poll
for change and call the same cd_helper function.
mmc_fdt_gpio_setup will also parse the wp-gpio property and MMC drivers
can know the write-protect pin value by calling the
mmc_fdt_gpio_get_readonly function.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D23267
Each segment can be up to 4096 bytes in chain structure according to the
RK3399 TRM Part 2.
Set the buffers in full ring where the last one point to the first one.
Correctly reports the MMC_IVAR_MAX_DATA.
Use CACHE_LINE_SIZE for bus_dma alignment.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D23894
The IVAR_MAX_DATA is supposed to have the number of descriptor X the mmc
block size and desc_count contain all this information + 1.
Reported by: phk
MFC after: 1 week
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
BIO_READ and BIO_WRITE, we've handled this expanded syntax poorly in
drivers when the driver doesn't support a particular command. Do a
sweep and fix that.
Reported by: imp