Commit Graph

84 Commits

Author SHA1 Message Date
Gleb Smirnoff
eb1b1807af Mechanically substitute flags from historic mbuf allocator with
malloc(9) flags within sys.

Exceptions:

- sys/contrib not touched
- sys/mbuf.h edited manually
2012-12-05 08:04:20 +00:00
Andre Oppermann
c9b652e3e8 Mechanically remove the last stray remains of spl* calls from net*/*.
They have been Noop's for a long time now.
2012-10-18 13:57:24 +00:00
VANHULLEBUS Yvan
d1b835208a In NAT-T transport mode, allow a client to open a new connection just after
closing another.
It worked only in tunnel mode before.

Submitted by:	Andreas Longwitz <longwitz@incore.de>
MFC after: 1M
2012-09-12 12:14:50 +00:00
John Baldwin
2541fcd953 Unexpand a couple of TAILQ_FOREACH()s. 2012-08-17 16:01:24 +00:00
Christian Brueffer
4795003bd2 Add missing va_end() in an error case to clean up after va_start()
(already done in the non-error case).

CID:		4726
Found with:	Coverity Prevent(tm)
MFC after:	1 week
2011-10-07 21:00:26 +00:00
VANHULLEBUS Yvan
568fac6f2e Release SP's refcount in key_get_spdbyid().
PR:	156676
Submitted by: Tobias Brunner (tobias@strongswan.org)
MFC after:	1 week
2011-05-09 13:16:21 +00:00
Bjoern A. Zeeb
db178eb816 Make IPsec compile without INET adding appropriate #ifdef checks.
Unfold the IPSEC_COMMON_INPUT_CB() macro in xform_{ah,esp,ipcomp}.c
to not need three different versions depending on INET, INET6 or both.

Mark two places preparing for not yet supported functionality with IPv6.

Reviewed by:	gnn
Sponsored by:	The FreeBSD Foundation
Sponsored by:	iXsystems
MFC after:	4 days
2011-04-27 19:28:42 +00:00
Fabien Thomas
73171433c5 Optimisation in IPSEC(4):
- Remove contention on ISR during the crypto operation by using rwlock(9).
- Remove a second lookup of the SA in the callback.

Gain on 6 cores CPU with SHA1/AES128 can be up to 30%.

Reviewed by:	vanhu
MFC after:	1 month
2011-03-31 15:23:32 +00:00
VANHULLEBUS Yvan
442da28aeb Fixed IPsec's HMAC_SHA256-512 support to be RFC4868 compliant.
This will break interoperability with all older versions of
FreeBSD for those algorithms.

Reviewed by:	bz, gnn
Obtained from:	NETASQ
MFC after:	1w
2011-02-18 09:40:13 +00:00
Dimitry Andric
3e288e6238 After some off-list discussion, revert a number of changes to the
DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various
people working on the affected files.  A better long-term solution is
still being considered.  This reversal may give some modules empty
set_pcpu or set_vnet sections, but these are harmless.

Changes reverted:

------------------------------------------------------------------------
r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines

Instead of unconditionally emitting .globl's for the __start_set_xxx and
__stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu
sections are actually defined.

------------------------------------------------------------------------
r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines

Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout
the tree.

------------------------------------------------------------------------
r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines

Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
2010-11-22 19:32:54 +00:00
Dimitry Andric
31c6a0037e Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout
the tree.
2010-11-14 20:38:11 +00:00
Bjoern A. Zeeb
4a85b5e2ea Make the IPsec SADB embedded route cache a union to be able to hold both the
legacy and IPv6 route destination address.
Previously in case of IPv6, there was a memory overwrite due to not enough
space for the IPv6 address.

PR:		kern/122565
MFC After:	2 weeks
2010-10-23 20:35:40 +00:00
VANHULLEBUS Yvan
2e8d55c4e8 Set SA's natt_type before calling key_mature() in key_add(),
as the SA may be used as soon as key_mature() has been done.

Obtained from:	NETASQ
MFC after:	1 week
2010-05-05 08:58:58 +00:00
VANHULLEBUS Yvan
2d2a2083f7 Update SA's NAT-T stuff before calling key_mature() in key_update(),
as SA may be used as soon as key_mature() has been called.

Obtained from:	NETASQ
MFC after: 1 week
2010-05-05 08:55:26 +00:00
Bjoern A. Zeeb
82cea7e6f3 MFP4: @176978-176982, 176984, 176990-176994, 177441
"Whitspace" churn after the VIMAGE/VNET whirls.

Remove the need for some "init" functions within the network
stack, like pim6_init(), icmp_init() or significantly shorten
others like ip6_init() and nd6_init(), using static initialization
again where possible and formerly missed.

Move (most) variables back to the place they used to be before the
container structs and VIMAGE_GLOABLS (before r185088) and try to
reduce the diff to stable/7 and earlier as good as possible,
to help out-of-tree consumers to update from 6.x or 7.x to 8 or 9.

This also removes some header file pollution for putatively
static global variables.

Revert VIMAGE specific changes in ipfilter::ip_auth.c, that are
no longer needed.

Reviewed by:	jhb
Discussed with:	rwatson
Sponsored by:	The FreeBSD Foundation
Sponsored by:	CK Software GmbH
MFC after:	6 days
2010-04-29 11:52:42 +00:00
VANHULLEBUS Yvan
61f73308d4 Locks SPTREE when setting some SP entries to state DEAD.
This can prevent kernel panics when updating SPs while
there is some traffic for them.

Obtained from: NETASQ
MFC after: 1m
2010-04-15 12:40:33 +00:00
Bjoern A. Zeeb
8b7893b056 When tearing down IPsec as part of a (virtual) network stack,
do not try to free the same list twice but free both the
acquiring list and the security policy acquiring list.

Reviewed by:	anchie
MFC after:	3 days
2010-03-28 06:51:50 +00:00
VANHULLEBUS Yvan
3e6265f14d fixed two race conditions when inserting/removing SAs via PFKey,
which can both lead to a kernel panic when adding/removing quickly
a lot of SAs.

Obtained from:	NETASQ
MFC after:	2w (MFC on 8 before 8.0 release ???)
2009-11-17 16:00:41 +00:00
VANHULLEBUS Yvan
22c125a1b6 When checking traffic endpoint's adresses families in key_spdadd(),
compare them together instead of comparing each one with respective
tunnel endpoint.

PR:	kern/138439
Submitted by:	aurelien.ansel@netasq.com
Obtained from:	NETASQ
MFC after:	1 m
2009-09-16 11:56:44 +00:00
Pawel Jakub Dawidek
fc79063e66 Silent gcc? Yeah, you wish. What I ment was to silence gcc.
Spotted by:	julian
2009-09-06 19:05:03 +00:00
Pawel Jakub Dawidek
3b02c4a3d3 Initialize state_valid and arraysize variable so gcc won't complain.
Reported by:	bz
2009-09-06 18:09:25 +00:00
Pawel Jakub Dawidek
950ab2f81e Improve code a bit by eliminating goto and having one unlock per lock. 2009-09-06 07:32:16 +00:00
Robert Watson
530c006014 Merge the remainder of kern_vimage.c and vimage.h into vnet.c and
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks.  Minor cleanups are done in the process,
and comments updated to reflect these changes.

Reviewed by:	bz
Approved by:	re (vimage blanket)
2009-08-01 19:26:27 +00:00
Robert Watson
5ee847d3ac Reimplement and/or implement vnet list locking by replacing a mostly
unused custom mutex/condvar-based sleep locks with two locks: an
rwlock (for non-sleeping use) and sxlock (for sleeping use).  Either
acquired for read is sufficient to stabilize the vnet list, but both
must be acquired for write to modify the list.

Replace previous no-op read locking macros, used in various places
in the stack, with actual locking to prevent race conditions.  Callers
must declare when they may perform unbounded sleeps or not when
selecting how to lock.

Refactor vnet sysinits so that the vnet list and locks are initialized
before kernel modules are linked, as the kernel linker will use them
for modules loaded by the boot loader.

Update various consumers of these KPIs based on whether they may sleep
or not.

Reviewed by:	bz
Approved by:	re (kib)
2009-07-19 14:20:53 +00:00
Robert Watson
1e77c1056a Remove unused VNET_SET() and related macros; only VNET_GET() is
ever actually used.  Rename VNET_GET() to VNET() to shorten
variable references.

Discussed with:	bz, julian
Reviewed by:	bz
Approved by:	re (kensmith, kib)
2009-07-16 21:13:04 +00:00
Robert Watson
eddfbb763d Build on Jeff Roberson's linker-set based dynamic per-CPU allocator
(DPCPU), as suggested by Peter Wemm, and implement a new per-virtual
network stack memory allocator.  Modify vnet to use the allocator
instead of monolithic global container structures (vinet, ...).  This
change solves many binary compatibility problems associated with
VIMAGE, and restores ELF symbols for virtualized global variables.

Each virtualized global variable exists as a "reference copy", and also
once per virtual network stack.  Virtualized global variables are
tagged at compile-time, placing the in a special linker set, which is
loaded into a contiguous region of kernel memory.  Virtualized global
variables in the base kernel are linked as normal, but those in modules
are copied and relocated to a reserved portion of the kernel's vnet
region with the help of a the kernel linker.

Virtualized global variables exist in per-vnet memory set up when the
network stack instance is created, and are initialized statically from
the reference copy.  Run-time access occurs via an accessor macro, which
converts from the current vnet and requested symbol to a per-vnet
address.  When "options VIMAGE" is not compiled into the kernel, normal
global ELF symbols will be used instead and indirection is avoided.

This change restores static initialization for network stack global
variables, restores support for non-global symbols and types, eliminates
the need for many subsystem constructors, eliminates large per-subsystem
structures that caused many binary compatibility issues both for
monitoring applications (netstat) and kernel modules, removes the
per-function INIT_VNET_*() macros throughout the stack, eliminates the
need for vnet_symmap ksym(2) munging, and eliminates duplicate
definitions of virtualized globals under VIMAGE_GLOBALS.

Bump __FreeBSD_version and update UPDATING.

Portions submitted by:  bz
Reviewed by:            bz, zec
Discussed with:         gnn, jamie, jeff, jhb, julian, sam
Suggested by:           peter
Approved by:            re (kensmith)
2009-07-14 22:48:30 +00:00
Robert Watson
d1da0a0672 Add address list locking for in6_ifaddrhead/ia_link: as with locking
for in_ifaddrhead, we stick with an rwlock for the time being, which
we will revisit in the future with a possible move to rmlocks.

Some pieces of code require significant further reworking to be
safe from all classes of writer-writer races.

Reviewed by:	bz
MFC after:	6 weeks
2009-06-25 16:35:28 +00:00
Robert Watson
2d9cfabad4 Add a new global rwlock, in_ifaddr_lock, which will synchronize use of the
in_ifaddrhead and INADDR_HASH address lists.

Previously, these lists were used unsynchronized as they were effectively
never changed in steady state, but we've seen increasing reports of
writer-writer races on very busy VPN servers as core count has gone up
(and similar configurations where address lists change frequently and
concurrently).

For the time being, use rwlocks rather than rmlocks in order to take
advantage of their better lock debugging support.  As a result, we don't
enable ip_input()'s read-locking of INADDR_HASH until an rmlock conversion
is complete and a performance analysis has been done.  This means that one
class of reader-writer races still exists.

MFC after:      6 weeks
Reviewed by:    bz
2009-06-25 11:52:33 +00:00
Robert Watson
80af0152f3 Convert netinet6 to using queue(9) rather than hand-crafted linked lists
for the global IPv6 address list (in6_ifaddr -> in6_ifaddrhead).  Adopt
the code styles and conventions present in netinet where possible.

Reviewed by:	gnn, bz
MFC after:	6 weeks (possibly not MFCable?)
2009-06-24 21:00:25 +00:00
Bjoern A. Zeeb
57700c9e4d Move setting of ports from NAT-T below key_getsah() and actually
below key_setsaval().
Without that, the lookup for the SA had failed as we were looking for
a SA with the new, updated port numbers instead of the old ones and
were comparing the ports in key_cmpsaidx().
This makes updating the remote -> local SA on the initiator work again.

Problem introduced with:	p4 changeset 152114
2009-06-19 21:01:55 +00:00
VANHULLEBUS Yvan
7b495c4494 Added support for NAT-Traversal (RFC 3948) in IPsec stack.
Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry
Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele
(julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense
team, and all people who used / tried the NAT-T patch for years and
reported bugs, patches, etc...

X-MFC: never

Reviewed by:	bz
Approved by:	gnn(mentor)
Obtained from:	NETASQ
2009-06-12 15:44:35 +00:00
Marko Zec
bc29160df3 Introduce an infrastructure for dismantling vnet instances.
Vnet modules and protocol domains may now register destructor
functions to clean up and release per-module state.  The destructor
mechanisms can be triggered by invoking "vimage -d", or a future
equivalent command which will be provided via the new jail framework.

While this patch introduces numerous placeholder destructor functions,
many of those are currently incomplete, thus leaking memory or (even
worse) failing to stop all running timers.  Many of such issues are
already known and will be incrementaly fixed over the next weeks in
smaller incremental commits.

Apart from introducing new fields in structs ifnet, domain, protosw
and vnet_net, which requires the kernel and modules to be rebuilt, this
change should have no impact on nooptions VIMAGE builds, since vnet
destructors can only be called in VIMAGE kernels.  Moreover,
destructor functions should be in general compiled in only in
options VIMAGE builds, except for kernel modules which can be safely
kldunloaded at run time.

Bump __FreeBSD_version to 800097.
Reviewed by:	bz, julian
Approved by:	rwatson, kib (re), julian (mentor)
2009-06-08 17:15:40 +00:00
VANHULLEBUS Yvan
aa1faa5fc6 Lock SPTREE before parsing it in key_spddump()
Approved by:	gnn(mentor)
Obtained from:	NETASQ
MFC after:	2 weeks
2009-05-27 09:44:14 +00:00
VANHULLEBUS Yvan
cff5821a61 Only decrease refcnt once when flushing SPD entries, to
avoid flushing entries which are still used.

Approved by:	gnn(mentor)
Obtained from:	NETASQ
MFC after:	1 month
2009-05-27 09:31:50 +00:00
Bruce M Simpson
d9cc2ca298 Stub out IN6_LOOKUP_MULTI() for GETSPI requests, for now.
This has the effect that IPv6 multicast traffic won't trigger
an SPI allocation when IPSEC is in use, however, this obviously
needs to stomp on locks, and IN6_LOOKUP_MULTI() is about to go away.

This definitely needs to be revisited before 8.x is branched as
a release branch.
2009-04-29 11:15:58 +00:00
Bjoern A. Zeeb
f4ad3139bb key_gettunnel() has been unsued with FAST_IPSEC (now IPSEC).
KAME had explicit checks at one point using it, so just hide it behind
#if 0 for now until we are sure if we can completely dump it or not.

MFC after:	1 month
2009-04-27 21:04:16 +00:00
Marko Zec
1ed81b739e First pass at separating per-vnet initializer functions
from existing functions for initializing global state.

        At this stage, the new per-vnet initializer functions are
	directly called from the existing global initialization code,
	which should in most cases result in compiler inlining those
	new functions, hence yielding a near-zero functional change.

        Modify the existing initializer functions which are invoked via
        protosw, like ip_init() et. al., to allow them to be invoked
	multiple times, i.e. per each vnet.  Global state, if any,
	is initialized only if such functions are called within the
	context of vnet0, which will be determined via the
	IS_DEFAULT_VNET(curvnet) check (currently always true).

        While here, V_irtualize a few remaining global UMA zones
        used by net/netinet/netipsec networking code.  While it is
        not yet clear to me or anybody else whether this is the right
        thing to do, at this stage this makes the code more readable,
        and makes it easier to track uncollected UMA-zone-backed
        objects on vnet removal.  In the long run, it's quite possible
        that some form of shared use of UMA zone pools among multiple
        vnets should be considered.

	Bump __FreeBSD_version due to changes in layout of structs
	vnet_ipfw, vnet_inet and vnet_net.

Approved by:	julian (mentor)
2009-04-06 22:29:41 +00:00
VANHULLEBUS Yvan
485cf78203 Fixed comments so it stays in 80 chars by line
with hard tabs of 8 chars....

Approved by:	gnn(mentor)
2009-03-23 16:20:39 +00:00
VANHULLEBUS Yvan
039b1e5daa Spelling fix in a comment
Approved by:	gnn(mentor)
2009-03-20 09:12:01 +00:00
VANHULLEBUS Yvan
d802e23c60 Fixed style for some comments
Approved by:	gnn(mentor)
2009-03-19 15:50:45 +00:00
VANHULLEBUS Yvan
bf777da6b1 Fixed style for some comments
Approved by:	gnn(mentor)
2009-03-19 15:44:13 +00:00
VANHULLEBUS Yvan
e0a9f20020 Fixed deletion of sav entries in key_delsah()
Approved by:	gnn(mentor)
Obtained from:	NETASQ
MFC after:	1 month
2009-03-18 14:01:41 +00:00
VANHULLEBUS Yvan
e985f4e07c SAs are valid (but dying) when they reached soft lifetime,
even if they have never been used.

Approved by:	gnn(mentor)
MFC after:	2 weeks
2009-03-05 16:22:32 +00:00
Roman Divacky
af83f5d77c Change the functions to ANSI in those cases where it breaks promotion
to int rule. See ISO C Standard: SS6.7.5.3:15.

Approved by:	kib (mentor)
Reviewed by:	warner
Tested by:	silence on -current
2009-02-24 18:09:31 +00:00
Bjoern A. Zeeb
fc384fa5d6 Another step assimilating IPv[46] PCB code - directly use
the inpcb names rather than the following IPv6 compat macros:
in6pcb,in6p_sp, in6p_ip6_nxt,in6p_flowinfo,in6p_vflag,
in6p_flags,in6p_socket,in6p_lport,in6p_fport,in6p_ppcb and
sotoin6pcb().

Apart from removing duplicate code in netipsec, this is a pure
whitespace, not a functional change.

Discussed with:	rwatson
Reviewed by:	rwatson (version before review requested changes)
MFC after:	4 weeks (set the timer and see then)
2008-12-15 21:50:54 +00:00
Bjoern A. Zeeb
4b79449e2f Rather than using hidden includes (with cicular dependencies),
directly include only the header files needed. This reduces the
unneeded spamming of various headers into lots of files.

For now, this leaves us with very few modules including vnet.h
and thus needing to depend on opt_route.h.

Reviewed by:	brooks, gnn, des, zec, imp
Sponsored by:	The FreeBSD Foundation
2008-12-02 21:37:28 +00:00
Marko Zec
97021c2464 Merge more of currently non-functional (i.e. resolving to
whitespace) macros from p4/vimage branch.

Do a better job at enclosing all instantiations of globals
scheduled for virtualization in #ifdef VIMAGE_GLOBALS blocks.

De-virtualize and mark as const saorder_state_alive and
saorder_state_any arrays from ipsec code, given that they are never
updated at runtime, so virtualizing them would be pointless.

Reviewed by:  bz, julian
Approved by:  julian (mentor)
Obtained from:        //depot/projects/vimage-commit2/...
X-MFC after:  never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-11-26 22:32:07 +00:00
Marko Zec
44e33a0758 Change the initialization methodology for global variables scheduled
for virtualization.

Instead of initializing the affected global variables at instatiation,
assign initial values to them in initializer functions.  As a rule,
initialization at instatiation for such variables should never be
introduced again from now on.  Furthermore, enclose all instantiations
of such global variables in #ifdef VIMAGE_GLOBALS blocks.

Essentialy, this change should have zero functional impact.  In the next
phase of merging network stack virtualization infrastructure from
p4/vimage branch, the new initialization methology will allow us to
switch between using global variables and their counterparts residing in
virtualization containers with minimum code churn, and in the long run
allow us to intialize multiple instances of such container structures.

Discussed at:	devsummit Strassburg
Reviewed by:	bz, julian
Approved by:	julian (mentor)
Obtained from:	//depot/projects/vimage-commit2/...
X-MFC after:	never
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
2008-11-19 09:39:34 +00:00
Marko Zec
8b615593fc Step 1.5 of importing the network stack virtualization infrastructure
from the vimage project, as per plan established at devsummit 08/08:
http://wiki.freebsd.org/Image/Notes200808DevSummit

Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator
macros, and CURVNET_SET() context setting macros, all currently
resolving to NOPs.

Prepare for virtualization of selected SYSCTL objects by introducing a
family of SYSCTL_V_*() macros, currently resolving to their global
counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT().

Move selected #defines from sys/sys/vimage.h to newly introduced header
files specific to virtualized subsystems (sys/net/vnet.h,
sys/netinet/vinet.h etc.).

All the changes are verified to have zero functional impact at this
point in time by doing MD5 comparision between pre- and post-change
object files(*).

(*) netipsec/keysock.c did not validate depending on compile time options.

Implemented by:	julian, bz, brooks, zec
Reviewed by:	julian, bz, brooks, kris, rwatson, ...
Approved by:	julian (mentor)
Obtained from:	//depot/projects/vimage-commit2/...
X-MFC after:	never
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
2008-10-02 15:37:58 +00:00
Bjoern A. Zeeb
603724d3ab Commit step 1 of the vimage project, (network stack)
virtualization work done by Marko Zec (zec@).

This is the first in a series of commits over the course
of the next few weeks.

Mark all uses of global variables to be virtualized
with a V_ prefix.
Use macros to map them back to their global names for
now, so this is a NOP change only.

We hope to have caught at least 85-90% of what is needed
so we do not invalidate a lot of outstanding patches again.

Obtained from:	//depot/projects/vimage-commit2/...
Reviewed by:	brooks, des, ed, mav, julian,
		jamie, kris, rwatson, zec, ...
		(various people I forgot, different versions)
		md5 (with a bit of help)
Sponsored by:	NLnet Foundation, The FreeBSD Foundation
X-MFC after:	never
V_Commit_Message_Reviewed_By:	more people than the patch
2008-08-17 23:27:27 +00:00