This also accomplishes the following:
- Proxy through zfs_nicenum as be_nicenum, because it looks better than
humanize_number and would presumably be useful to other libbe consumers.
- Rename be_get_snapshot_props to be_get_dataset_props, make it more useful
-H is for a scripted format, where all fields are tab-delimited and the
headers go away. We accomplish this by splitting out pad printing to a
separate function that'll take into account whether we're supposed to be
scripted or not.
This has the nice side effect of maintaining positive column sizes again.
scripts. This means one should be able to eg rewrite their /etc/rc
in Python.
Reviewed by: kib
MFC after: 2 weeks
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16565
While it could be preferred to do this at insert in libbe(3), there's no
convenient way to insert at the head of an nvlist. Instead, we'll make two
passes over- once to print anything active either now or at nextboot, and
another to print everything else.
This doesn't actually impact performance in a significant way here, so we'll
worry about further optimizations if the need actually arises.
bectl list -a should show the boot environment, its relevant dataset, and
the snapshot it was created from. The header also changes to indicate the
rough order in which these things will show.
While here, start doing a little bit of spring cleaning and splitting
different bits out.
The timespecadd(3) family of macros were imported from NetBSD back in
r35029. However, they were initially guarded by #ifdef _KERNEL. In the
meantime, we have grown at least 28 syscalls that use timespecs in some
way, leading many programs both inside and outside of the base system to
redefine those macros. It's better just to make the definitions public.
Our kernel currently defines two-argument versions of timespecadd and
timespecsub. NetBSD, OpenBSD, and FreeDesktop.org's libbsd, however, define
three-argument versions. Solaris also defines a three-argument version, but
only in its kernel. This revision changes our definition to match the
common three-argument version.
Bump _FreeBSD_version due to the breaking KPI change.
Discussed with: cem, jilles, ian, bde
Differential Revision: https://reviews.freebsd.org/D14725
from being installed in the correct directory.
Resurrect a few rc.d scripts that were prematurely deleted from the
Makefile by r336845.
Reviewed by: brd
This keeps most startup scripts as CONFS per discussion on src-committers from
back during BSDCan.
Approved by: will (mentor)
Differential Revision: https://reviews.freebsd.org/D16466
target.
Also update the pfctl tests Makefile to work with this change.
Approved by: bapt (mentor)
Differential Revision: https://reviews.freebsd.org/D16430
The jail is created with allow.mount, allow.mount.devfs, and
enforce_statfs=1. Upon creation, we immediately attach, chdir to "/", and
drop the user into a shell inside the jail.
The default IP for this is arbitrarily 10.20.30.40.
The given parameter may either be a jid, jail name, or a BE name. In all
cases, the parameter will be resolved to a jid and bectl(8) will
sanity-check that there's actually a BE mounted at the requested jail root
before invoking jail_remove(2).
Based on the idea that we shouldn't have all-new library and utility going
into base that need WARNS=1...
- Decent amount of constification
- Lots of parentheses
- Minor other nits
For the moment, this is a primitive nvlist dump of what we get back from
be_get_bootenv_props as a proof-of-concept and to make sure that we're
getting back the kind of information we want to see from list.
This check eliminates infinite loop of MTU change / link flap / lease verification / MTU change / link flap etc.
in case of some NIC drivers like em(4) or igb(4).
N.B.: obsolete u_int16_t is used in consistency with the rest of the file.
PR: 229432
Approved by: mav (mentor)
MFC after: 1 week
"record-state" is similar to "keep-state", but it doesn't produce implicit
O_PROBE_STATE opcode in a rule. "set-limit" is like "limit", but it has the
same feature as "record-state", it is single opcode without implicit
O_PROBE_STATE opcode. "defer-action" is targeted to be used with dynamic
states. When rule with this opcode is matched, the rule's action will
not be executed, instead dynamic state will be created. And when this
state will be matched by "check-state", then rule action will be executed.
This allows create a more complicated rulesets.
Submitted by: lev
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D1776
The double compilation of the kernel sources in libmd and libcrypt is
baffling, but add yet another define hack to prevent duplicate symbols.
Add documentation and SHA2-224 test cases to libmd.
Integrate with the md5(1) command, document, and add more test cases;
self-tests pass.
sockstat(1), ugidfw(8)
These are the last of the jail-aware userland utilities that didn't work
with names.
PR: 229266
MFC after: 3 days
Differential Revision: D16047
The issue was caused by header pollution brought by GCC 8.1.
We now have to remove include-fixed headers in the GCC installation
directory.
Sponsored by: DARPA, AFRL
Pointed out by: jhb
o Also move printf.h to go after it since it does require declaration
of va_list.
This fixes build with latest RISC-V GNU Toolchain with GCC 8.1
Sponsored by: DARPA, AFRL
If '-n' is set we don't use the list of skip interfaces, so don't retrieve it.
This fixes issues if 'pfctl -n' is used before the pf module is loaded. This
was broken by r333181.
Reported by: Jakub Chromy <hicks AT cgi.cz>
MFC after: 1 week
Currently ifconfig(8) only prints the hex representation of ssid names
with non-ASCII characters. Many modern terminals are able to properly render
non-ASCII characters. This change checks if the terminal charmap is UTF-8,
and if so, will render the characters, rather than the hex value.
This behavior is circumvented by running ifconfig(8) in a non-UTF8 locale;
e.g. C or POSIX.
It was pointed out by kp@ during the review that APs have the option to
broadcast whether their SSIDs may be interpreted as UTF-8. Ideally, we would
honor this and only attempt this behavior if it's so-broadcasted by the AP.
However, a sample survey showed that hostapd will advertise this if
indicated in config but it doesn't seem to be so common in the AP market, so
this would be effectively useless as we'll rarely know if the SSID should be
renderable as UTF-8.
Despite this, it was decided to be OK with this anyways- there's a
straightforward path to doing it the right way based on advertisement by AP
if we need to go that route, and one can revert to old behavior easily
enough at runtime if we get it wrong.
Submitted by: Farhan Khan <khanzf@gmail.com>
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D15922
When expanding a variable set by a message from the kernel, safely
quote all arguments expanded when creating a command line for the
shell.
Reviewd by: Shawn Webb, Oliver Pinter, brd@
Sponsored by: Netflix
While useful as an example, veriexecctl, as it is, has very little practical
use, since there is nothing ensuring the integrity of the manifest of hashes.
A more appropriate set of utilities will replace it.
Rather then combining hardlink creation for the geom(8) binary with
shared library build, move libraries to src/lib/geom so they are
built and installed normally. Create a common Makefile.classes
which is included by both lib/geom/Makefile and sbin/geom/Makefile
so the symlink and libraries stay in sync.
The relocation of libraries allows libraries to be build for 32-bit
compat. This also reduces the number of non-standard builds in
the system.
This commit is not sufficent to run a 32-bit /sbin/geom on a 64-bit
system out of the box as it will look in the wrong place for libraries
unless GEOM_LIBRARY_PATH is set appropriatly in the environment.
Reviewed by: bdrewery
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15360
A more correct way to modernize code that uses __progname is to just
replace each occurance of it with a call to getprogname(3)
Reported by: ian
Reviewed by: imp
be executed in the if() conditional. If its not supposed to be printed
inside the conditional, then the braces should be removed and the extra
tabs on the fprintf() should be removed.
Noted by cross compilation with gcc-mips.
- add static in a number of places
- initialize __progname rather than rely on magical extern values
- use nitems() instead of manually spelling it out
- unshadow 'idi'
- teach 'error' that it is '__dead2'
- add missing 'break'
- remove param: unused since r95357.
- correct definition of usage
- add explicit fallthrough notice. The existing one doesn't work with
our selection of "implicit-fallthrough" strictness.
This results in WARNS=6 building on amd64, but not other arches
Normally pf rules are expected to do one of two things: pass the traffic or
block it. Blocking can be silent - "drop", or loud - "return", "return-rst",
"return-icmp". Yet there is a 3rd category of traffic passing through pf:
Packets matching a "pass" rule but when applying the rule fails. This happens
when redirection table is empty or when src node or state creation fails. Such
rules always fail silently without notifying the sender.
Allow users to configure this behaviour too, so that pf returns an error packet
in these cases.
PR: 226850
Submitted by: Kajetan Staszkiewicz <vegeta tuxpowered.net>
MFC after: 1 week
Sponsored by: InnoGames GmbH
We do not have code to fix this situation, and the mismatch does not
prevent the kernel driver from consuming the file system, and some factory
formatted SD cards seem to have a garbage backup block.
This makes the code match to its comments (replacing pfatal with pwarn).
Inspired by: NetBSD r1.13
Inspired by: b47b16353f
MFC after: 2 weeks
containing paths, fingerprints, and optional option flags which in turn
get pushed into the MAC/veriexec meta-data store via the veriexec device.
The format of the fingerprints file is as follows:
path type fingerprint options
The type of fingerprint supported depends on what MAC/veriexec fingerprint
modules have been loaded into the system. The veriexecctl application is
able to determine which ones are available by consulting the
security.mac.veriexec.algorithms sysctl.
The following options are currently supported in MAC/veriexec and by the
veriexecctl application:
indirect
If this option is set then the executable cannot be invoked directly, it
can only be used as an interpreter in shell scripts.
file
Indicates that the fingerprint is associated with a file, not an
executable. Files have their fingerprints verified during open(2) and are
automatically made read only. This option may be used to verify shared
libraries have not been tampered with.
no_ptrace
If this option is set then the executable cannot be traced with the
ptrace(2) process tracing and debugging call.
trusted
If this option is set then the executable is allowed to write to the
mem(4) devices. By default, when verified execution is enforced, no
process is allowed to write to the mem(4) devices.
The options are not case sensitive.
Reviewed by: jtl, wblock
Obtained from: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D8575
Continuing with a NULL hints variable just triggers a segfault later on.
The other error cases in this function all exit for an error rather than
warning.
Reviewed by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D15579
Implement MK_NVME now that the expression for where NVMe is
complicated. Default it to "yes" for x86 and powerpc64 and
no everywhere else. Use it in camcontrol to define WITH_NVME
for those platforms where we support nvme.
This should fix the newly introduced nvme files to camcontrol
which were building everywhere.
Pointy Hat To: imp
Sponsored by: Netflix
Both ATA and NVME have an identify command. They are completely
different, but to the user they are the same. Leverage nvmecontrol's
print_controller code to provide that functionality to camcontrol
identify. Query the path to see what kind of protocol it supports, and
send the most appropriate command down. Refactor nvme_print_dev a
little to make it easy to get the nvme cdata.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D15371
Rename print_controller to nvme_print_controller. Put it in its
own file for easy inclusion. Move util.c to be nc_util.c to not
conflict with camcontrol. add nvecontrol_ext.h to define shared
interfaces.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D15371
The size limits came from a flawed understanding of dump records.
The real issue was that dump was bogusly interpreting c_count
sometimes. r334978 fixes that.
We shouldn't count the bytes set in c_addr for TS_CLRI and TS_BITS
nodes. Those block overload c_count to communicate how many blocks
follow, not now many c_addr spaces are used. Dump would dump core
(now) because memory layout moved around and we'd access elements past
the end to make a count.
Reviewed by: kib@
Add some asserts that prevents the overflows of c_addr. This can't
happen, absent bugs. However, certain large filesystems can cause
problems. These have been prevented by r334968, but a solution
is needed. These asserts will help assure that solution is correct.
PR: 228807
Reviewed by: db
c_addr in spcl. So check before we start dumping otherwise we can
end up with a corrupted dump.
PR: 228807
Submitted by: db
Reviewed by: imp
Approved by: imp
PowerPC has PAGE_SIZE as a long, not an int. This causes the compiler to throw
a format mismatch warning on this print. To work around the difference, print
it as a long instead of an int, and force the argument to a long.
Reviewed By: imp
Differential Revision: https://reviews.freebsd.org/D15653
In the pf rc.d script the output of `/etc/rc.d/pf status` or `/etc/rc.d/pf
onestatus` always provided an exit status of zero. This made it fiddly to
programmatically determine if pf was running or not.
Return a non-zero status if the pf module is not loaded, extend pfctl to have
an option to return an error status if pf is not enabled.
PR: 228632
Submitted by: James Park-Watt <jimmypw AT gmail.com>
MFC after: 1 week
In some cases broken DHCP servers might send invalid MTU value, so allow to
use 'supersede' in dhclient.conf to override this. When superseded value is
0, MTU value is not updated at all.
PR: 206721
Submitted by: novel@
Reported by: <jimp AT pfsense.org>
MFC after: 37 minutes (if you care about 11, please MFC to 11.2)
Relnotes: yes (potentially surprising behavior change w/ broken dhcpd mtu)
Differential Revision: https://reviews.freebsd.org/D15484
This change also makes alignment and spacing an explicit number rather
than a bunch of spaces.
Reviewed by: mmacy
Requested by: Yuri Pankov <yuripv@yuripv.net>
