Commit Graph

191008 Commits

Author SHA1 Message Date
Konstantin Belousov
3bcc218f46 Correct the problem reported by test16 from
tools/regression/file/flock/flock.c, which completes the fix in
r192685.  When the lock was stolen from us, retry the whole lock
sequence in kernel, instead of returning EINTR to usermode and hoping
that application would handle it correctly by restarting the lock
acquire.

Tested by:	pho
Sponsored by:	The FreeBSD Foundation
MFC after:	2 weeks
2014-07-08 08:10:15 +00:00
Konstantin Belousov
a5244bac2e Correct si_code for the SIGBUS signal generated by the alignment trap.
Reported and tested by:	pho
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
2014-07-08 08:05:42 +00:00
Warren Block
edcb40eb4e Make synopsis version of -3 flag match other uses in the page.
MFC after:	1 week
2014-07-08 02:43:04 +00:00
Warner Losh
9016d25fea Typo means that this couldn't have possibly fixed anything, so revert
r268377.
2014-07-08 02:11:48 +00:00
Warner Losh
8bc01eb62f xdev builds libsupc++ and libstdc++ in a slightly strange way. This
cause a race to be exposed between the two. Compensate for this race
by serializing the build/install of libstdc++ before libsupc++.
2014-07-07 23:21:25 +00:00
Warner Losh
413a368c90 rm -rf can fail sometimes with an error from fts_read. Make it honor
fflag to ignore fts_read errors, but stop deleting from that directory
because no further progress can be made.

When building a kernel with a high -j value on a high core count
machine, during the cleanobj phase we can wind up doing multiple rm
-rf at the same time for modules that have subdirectories. This
exposed this race (sometimes) as fts_read can return an error if the
directory is removed by another rm -rf. Since the intent of the -f
flag was to ignore errors, even if this was a bug in fts_read, we
should ignore the error like we've been instructed to do.
2014-07-07 23:21:20 +00:00
Warner Losh
e3a6cb96d6 Fix typo in flag name. 2014-07-07 23:21:15 +00:00
Warner Losh
cfe87f0076 Naughty NANDFS was using hidden unused flag, hiding the fact that the
flag was used and wasn't really available. Change the name without
fixing any laying issues that might be present in NANDFS' use of this
flag.
2014-07-07 23:21:07 +00:00
Don Lewis
626a79752f Declaration whitespace changes for style(9).
MFC after:	1 week
2014-07-07 22:02:39 +00:00
Alexander Motin
462cf3ba2a Make XPT_GET_TRAN_SETTINGS to report CAM that command queueing is enabled,
but make couple changes to handle non-queued commands too, if happen.

MFC after:	2 weeks
2014-07-07 17:34:48 +00:00
Warner Losh
4d3e74492b Document C_HARDCLOCK flag. 2014-07-07 16:55:07 +00:00
Dimitry Andric
90be798e31 Regenerate src.conf.5, which was completely busted by r268351. 2014-07-07 16:43:42 +00:00
Mateusz Guzik
5e2554b7f8 Don't call crdup nor uifind under vnode lock.
A locked vnode can get into the way of satisyfing malloc with M_WATOK.

This is a fixup to r268087.

Suggested by:	kib
MFC after:	1 week
2014-07-07 14:03:30 +00:00
Alexander Motin
dbd849d868 Fix "use after free" on port creation error in r268291. 2014-07-07 11:52:22 +00:00
Alexander Motin
1e5a8b8f4b Add support for READ FULL STATUS action of PERSISTENT RESERVE IN command. 2014-07-07 11:05:04 +00:00
Alexander Motin
604e257984 Teach ctl_add_initiator() to dynamically allocate IIDs from pool.
If port passed negative IID value, the function will try to allocate IID
from the pool of unused, based on passed wwpn or name arguments.  It does
all its best to make IID unique and persistent across reconnects.

This makes persistent reservation properly work for iSCSI.  Previously,
in case of reconnects, reservation could be unexpectedly lost, or even
migrate between intiators.
2014-07-07 09:37:22 +00:00
Alexander Motin
0f8de8afaa Fix bugs for PERSISTENT RESERVE OUT bits in r268096. 2014-07-07 08:58:36 +00:00
Fabien Thomas
b8fad6c0ef Optim and Fix for mge driver:
- add missing rcvif in mbuf
- add missing ipacket stat
- remove uncessary mbuf copy on output path
- fix deadlock of the TX engine in case of error

Obtained from:	NETASQ
MFC after:	2 weeks
2014-07-07 08:22:39 +00:00
Alexander Motin
99f8c067e6 Correction to r268356: collide only sessions to the same target. 2014-07-07 06:17:07 +00:00
Alexander Motin
2c6c9e47b2 When new connection comes in, check whether we already have session from
the same intiator (Name+ISID).  If so -- terminate the old session and let
the new one take its place, as required by iSCSI RFC.
2014-07-07 05:48:11 +00:00
Hans Petter Selasky
88e0a63961 Improve support for Intel Lynx Point USB 3.0 controllers by masking
the port routing bits like done in Linux.

MFC after:	1 week
Tested by:	Tur-Wei Chan <twchan@singnet.com.sg>
2014-07-07 05:17:16 +00:00
Alexander Motin
0020682baa Implement ABORT TASK SET and I_T NEXUS RESET task management functions.
Use the last one to terminate active commands on iSCSI session termination.
Previous code was aborting only commands doing some data moves.
2014-07-07 03:10:56 +00:00
Marcel Moolenaar
e7d939bda2 Remove ia64.
This includes:
o   All directories named *ia64*
o   All files named *ia64*
o   All ia64-specific code guarded by __ia64__
o   All ia64-specific makefile logic
o   Mention of ia64 in comments and documentation

This excludes:
o   Everything under contrib/
o   Everything under crypto/
o   sys/xen/interface
o   sys/sys/elf_common.h

Discussed at: BSDcan
2014-07-07 00:27:09 +00:00
Nathan Whitehorn
00cf40b0ca Use common vt_fb parts in ofwfb as far as we are able without sacrificing
performance.

MFC after:	2 weeks
2014-07-07 00:12:18 +00:00
Bryan Venteicher
6700a7d44b Use the appropriate IPv6 hashtype defines when looking up the PCBGROUP
Reviewed by:	adrian@
2014-07-07 00:02:49 +00:00
Gavin Atkinson
5bab80c452 Remove /usr/share/doc/psd/28.cvs/paper.ps.gz if it exists, as it is
obsolete since r251794.

PR:		191003
Submitted by:	Vick Khera
MFC after:	3 days
2014-07-06 23:08:47 +00:00
Andreas Tobler
64175581d0 Make gcc happy, init idlen2. 2014-07-06 20:09:23 +00:00
Alexander Motin
1380b77c12 Close race in r268291 between port destruction, delayed by sessions
teardown, and new port creation during `service ctld restart`.

Close it by returning iSCSI port internal state, that allows to identify
dying ports, which should not be counted as existing, from really alive.
2014-07-06 17:57:59 +00:00
Alan Cox
09132ba6ac Introduce pmap_unwire(). It will replace pmap_change_wiring(). There are
several reasons for this change:

pmap_change_wiring() has never (in my memory) been used to set the wired
attribute on a virtual page.  We have always used pmap_enter() to do that.
Moreover, it is not really safe to use pmap_change_wiring() to set the wired
attribute on a virtual page.  The description of pmap_change_wiring() says
that it assumes the existence of a mapping in the pmap.  However, non-wired
mappings may be reclaimed by the pmap at any time.  (See pmap_collect().)
Many implementations of pmap_change_wiring() will crash if the mapping does
not exist.

pmap_unwire() accepts a range of virtual addresses, whereas
pmap_change_wiring() acts upon a single virtual page.  Since we are
typically unwiring a range of virtual addresses, pmap_unwire() will be more
efficient.  Moreover, pmap_unwire() allows us to unwire superpage mappings.
Previously, we were forced to demote the superpage mapping, because
pmap_change_wiring() only allowed us to express the unwiring of a single
base page mapping at a time.  This added to the overhead of unwiring for
large ranges of addresses, including the implicit unwiring that occurs at
process termination.

Implementations for arm and powerpc will follow.

Discussed with:	jeff, marcel
Reviewed by:	kib
Sponsored by:	EMC / Isilon Storage Division
2014-07-06 17:42:38 +00:00
Alexander Motin
ffe82e05b3 Make iSCSI initiator keep Initiator Session ID (ISID) across reconnects.
Previously ISID was changed every time, that made impossible correct
persistent reservation, because reconnected session was identified as
completely new one.

Reviewed by:	trasz
MFC after:	1 week
2014-07-06 17:37:49 +00:00
Nathan Whitehorn
0558e4bb2b In case we ever support little-endian PowerPC (probably userland only),
avoid hardcoding endianness here.
2014-07-06 16:20:37 +00:00
Nathan Whitehorn
770047f5bb Add a new CPU id for a POWER8 variant. 2014-07-06 16:19:55 +00:00
Hans Petter Selasky
5cb6b3afa4 Fix OFED startup order: All SYSINIT()'s and modules should be loaded
prior to starting "/sbin/init" which will run all the "/etc/rc.d/xxx"
scripts. Else there can be a race configuring the interfaces via
"/etc/rc.conf".

MFC after:	4 weeks
Sponsored by:	Mellanox Technologies
2014-07-06 14:22:13 +00:00
Hans Petter Selasky
22239af86c Fix compile warning.
MFC after:	4 weeks
Sponsored by:	Mellanox Technologies
2014-07-06 14:20:47 +00:00
Hans Petter Selasky
d291b07865 Fix some compile warnings.
MFC after:	4 weeks
Sponsored by:	Mellanox Technologies
2014-07-06 14:14:07 +00:00
Andrew Turner
0685d955d6 Align the stack in _rtld_bind_start. Normally this is called with the
correct stack alignment, however when we have a leaf function that uses
thread local storage it calls __aeabi_read_tp to get the thread pointer.
Neither GCC or clang see this as a function call so will align the stack
to a 4-byte boundary. This may be a problem as _rtld_bind expects to be
on an 8-byte boundary.

The solution is to store a copy of the stack pointer and force the
alignment before calling _rtld_bind.

This fixes a problem with armeb where applications would crash in odd ways.
It should also remove the need for a local patch to clang to force the
stack alignment to an 8-byte boundary, even for leaf functions. Further
testing will be needed before reverting this local change to clang as we
may rely on it in other places.

Reviewed by:	jmg@
2014-07-06 10:24:06 +00:00
Alexander Motin
99ae56ac82 Add support for SCSI Ports (88h) VPD page. 2014-07-06 07:34:18 +00:00
Alexander Motin
69d7b87790 Make REPORT TARGET PORT GROUPS command report realistic data instead of
hardcoded garbage.
2014-07-06 07:02:36 +00:00
Alexander Motin
c26eee2dc9 Move lun_map() method from command nexus to port.
Previous implementation made impossible to do some things, such as calling
it for ports other then one through which command arrived.
2014-07-06 06:21:34 +00:00
Alexander Motin
561764b1c5 Relax some bit checks for INQUIRY command.
FreeBSD still tries to put LUN number in second byte until it get device
protocol version, even that it was obsoleted about 20 years ago.
2014-07-06 06:12:29 +00:00
Jilles Tjoelker
2d70c63720 sh: Fix overflow checking on 'ulimit' operand. 2014-07-05 21:50:59 +00:00
Gavin Atkinson
764442e03d Add support to asmc(4) for Macmini 3,1.
PR:		190195
Submitted by:	fbsdbugs2 sentry.org
MFC after:	1 week
Relnotes:	yes
2014-07-05 21:34:37 +00:00
Alexander Motin
6d81c129dd Pass through iSCSI session ISID from LOGIN request to the CTL frontend.
ISID is an important part of initiator transport ID for iSCSI.  It is not
used now, but should be to properly implement persistent reservation.
2014-07-05 21:18:33 +00:00
Luiz Otavio O Souza
a48d677f26 Check the number of returned entries before doing any access to ifm_ulist. 2014-07-05 20:16:02 +00:00
Rui Paulo
9f65e34ff8 bsd.dep.mk: add support for generating DTrace header files from .d files.
MFC after:	3 weeks
2014-07-05 20:08:35 +00:00
Gavin Atkinson
c57440ecd7 Use %zu not %zd for printing size_t.
PR:		185007
Submitted by:	saper saper.info
MFC after:	3 days
2014-07-05 20:08:25 +00:00
Gavin Atkinson
2e60665eda Correct format string to fix build of uhsoctl when DEBUG is defined
PR:		185007
Submitted by:	saper saper.info
MFC after:	3 days
2014-07-05 19:53:21 +00:00
Rui Paulo
45d79bdba1 Add the DTrace probe definitions for plockstat support.
This will be connected to the system later.

Sponsored by:	The FreeBSD Foundation
2014-07-05 19:49:31 +00:00
Gavin Atkinson
9f3a29b586 Fix equation and limerick to be correct. NetBSD fixed this 14 years ago
(src/games/fortune/datfiles/fortunes2 1.7).

PR:		188714
Submitted by:	ksmakoto dd.iij4u.or.jp
Reviewed by:	Wolfram Alpha
MFC after:	3 days
2014-07-05 19:37:38 +00:00
Luiz Otavio O Souza
28b07d23a9 Allow the PVID setting on CPU port.
Return our static list of supported media for the CPU port.

Tested on TP-Link 1043ND.
2014-07-05 19:31:22 +00:00