might have been mmapped, and if so, passing the pointer to free() is
really not a good idea.
[ In the next millenium, when I've taken over the world, I'm going
to ban 8 character tabs. You've been warned. ]
would expect. (Allow user data to be associated with an EditLine context).
As this changes no existing interfaces and doesn't alter any structs
visable to the user I've been told that its not necessary to bump
the version of the library.
- Sort xrefs
- FreeBSD.ORG -> FreeBSD.org
- Be consistent with section names as outlines in mdoc(7)
- Other misc mdoc cleanup.
PR: doc/13144
Submitted by: Alexy M. Zelkin <phantom@cris.net>
When fts_open is used with option FTS_NOCHDIR the full
path entry of type FTS_DP is returned with a trailing
'/' if the final directory is empty.
This fix coresponds to netbsd's __fts13.c v. 1.16
1) Safty change from casper dik was added to OpenBSD's sources since I
grabbed them. milltert@openbsd.org
2) Split up strlcpy to improve efficiency of the common case.
milltert@openbsd.org
3) Cleanup of cross references for man page. {alex,aaron}@openbsd.org
Pointed out by: deraadt@openbsd.org
Removed POSIX.1/NetBSD markup (braces) for NAME_MAX, etc. We don't
define this. Most FreeBSD man pages hard-code the limits; in fact,
utimes.2 recently became the only file in libc/sys/*.2 that mentions
NAME_MAX. There probably should be mandoc macros for this.
Text is a compromise based on messages from Wes Peters, Ville-Pertti
Keinonen, and Matt Dillon.
PR: docs/10512
Submitted by: Howard Goldstein <hgoldst@mpcs.com>
Note: you need to install the current groff tmac macros for these
man pages to format correctly. Specifically, rev 1.21 of
contrib_groff/tmac/doc-syms in -current, or rev 1.17.24 for 3.2-stable
misinterpreted to mean that the pointer passed to asprintf() must be suitable
for passing to realloc() as-is (ie. either a NULL pointer or a valid pointer).
(devname() returned "??" when the lookup failed, but callers expected it
to return NULL). This was fixed in Lite2, but until recently the changes
were only merged into devname.3. A day or two after devname.c was fixed,
devname.3 was made inconsistent again by backing out most of the Lite2
changes.
track.
The $Id$ line is normally at the bottom of the main comment block in the
man page, separated from the rest of the manpage by an empty comment,
like so;
.\" $Id$
.\"
If the immediately preceding comment is a @(#) format ID marker than the
the $Id$ will line up underneath it with no intervening blank lines.
Otherwise, an additional blank line is inserted.
Approved by: bde
track.
The $Id$ line is normally at the bottom of the main comment block in the
man page, separated from the rest of the manpage by an empty comment,
like so;
.\" $Id$
.\"
If the immediately preceding comment is a @(#) format ID marker than the
the $Id$ will line up underneath it with no intervening blank lines.
Otherwise, an additional blank line is inserted.
Approved by: bde
Always use mmap() for default-size stack allocation. Use MAP_ANON instead
of MAP_STACK on the alpha architecture.
Reduce the amount of code executed while owning _gc_mutex during stack
allocation.
Cache discarded default thread stacks for use in subsequent thread creations.
Create a red zone at the end of each stack (including the initial thread
stack), with the hope of causing a segfault if a stack overflows.
To activate these modifications, add -D_PTHREAD_GSTACK to CFLAGS in
src/lib/libc_r/Makefile. Since the modifications depend on the VM_STACK
kernel option, I'm not sure how to safely use growable stacks by default.
Testing, as well as algorithmic and stylistic comments are welcome.
secure permissions in case the user attempts to save something to
a file of his own.
Move umask stuff out of pw_init() into main() for better visibility
of overall umask tweaking logic.
PR: misc/11797
o The polling mechanism for I/O readiness was changed from
select() to poll(). In additon, a wrapped version of poll()
is now provided.
o The wrapped select routine now converts each fd_set to a
poll array so that the thread scheduler doesn't have to
perform a bitwise search for selected fds each time file
descriptors are polled for I/O readiness.
o The thread scheduler was modified to use a new queue (_workq)
for threads that need work. Threads waiting for I/O readiness
and spinblocks are added to the work queue in addition to the
waiting queue. This reduces the time spent forming/searching
the array of file descriptors being polled.
o The waiting queue (_waitingq) is now maintained in order of
thread wakeup time. This allows the thread scheduler to
find the nearest wakeup time by looking at the first thread
in the queue instead of searching the entire queue.
o Removed file descriptor locking for select/poll routines. An
application should not rely on the threads library for providing
this locking; if necessary, the application should use mutexes
to protect selecting/polling of file descriptors.
o Retrieve and use the kernel clock rate/resolution at startup
instead of hardcoding the clock resolution to 10 msec (tested
with kernel running at 1000 HZ).
o All queues have been changed to use queue.h macros. These
include the queues of all threads, dead threads, and threads
waiting for file descriptor locks.
o Added reinitialization of the GC mutex and condition variable
after a fork. Also prevented reallocation of the ready queue
after a fork.
o Prevented the wrapped close routine from closing the thread
kernel pipes.
o Initialized file descriptor table for stdio entries at thread
init.
o Provided additional flags to indicate to what queues threads
belong.
o Moved TAILQ initialization for statically allocated mutex and
condition variables to after the spinlock.
o Added dispatching of signals to pthread_kill. Removing the
dispatching of signals from thread activation broke sigsuspend
when pthread_kill was used to send a signal to a thread.
o Temporarily set the state of a thread to PS_SUSPENDED when it
is first created and placed in the list of threads so that it
will not be accidentally scheduled before becoming a member
of one of the scheduling queues.
o Change the signal handler to queue signals to the thread kernel
pipe if the scheduling queues are protected. When scheduling
queues are unprotected, signals are then dequeued and handled.
o Ensured that all installed signal handlers block the scheduling
signal and that the scheduling signal handler blocks all
other signals. This ensures that the signal handler is only
interruptible for and by non-scheduling signals. An atomic
lock is used to decide which instance of the signal handler
will handle pending signals.
o Removed _lock_thread_list and _unlock_thread_list as they are
no longer used to protect the thread list.
o Added missing RCS IDs to modified files.
o Added checks for appropriate queue membership and activity when
adding, removing, and searching the scheduling queues. These
checks add very little overhead and are enabled when compiled
with _PTHREADS_INVARIANTS defined. Suggested and implemented
by Tor Egge with some modification by me.
o Close a race condition in uthread_close. (Tor Egge)
o Protect the scheduling queues while modifying them in
pthread_cond_signal and _thread_fd_unlock. (Tor Egge)
o Ensure that when a thread gets a mutex, the mutex is on that
threads list of owned mutexes. (Tor Egge)
o Set the kernel-in-scheduler flag in _thread_kern_sched_state
and _thread_kern_sched_state_unlock to prevent a scheduling
signal from calling the scheduler again. (Tor Egge)
o Don't use TAILQ_FOREACH macro while searching the waiting
queue for threads in a sigwait state, because a change of
state destroys the TAILQ link. It is actually safe to do
so, though, because once a sigwaiting thread is found, the
loop ends and the function returns. (Tor Egge)
o When dispatching signals to threads, make the thread inherit
the signal deferral flag of the currently running thread.
(Tor Egge)
Submitted by: Daniel Eischen <eischen@vigrid.com> and
Tor Egge <Tor.Egge@fast.no>
camcontrol(8) and the documentation in camlib.c and cam(3) all expect
-1 on failure and 0 on success. Updated camlib.c to return the values
specified by the documentation.
PR: 12023
pointers. The calls are in different sections from the functions
being called, and they can potentially be far away. On a very large
program, the 21-bit displacement field of the BSR instruction
overflowed at link time.
simple enough to be trusted.
Add account management functionality to the pam_unix module.
These changes should make it possible to use PAM in some ports.
Submitted by: Max Khon <fjoe@iclub.nsu.ru>
Submitted by: Yung-Jen Hung <winard@u3717a.dorm.ccu.edu.tw>
Reviewed by: bearscorp.bbs@bbs.life.nthu.edu.tw
_BIG5_sgetrune() in libc doesn't work well, this commit will fix it.
"passwordtime" is what passwd(1) has actually been using. I suspect
passwordperiod was the original intent. I can't figure-out which,
if either, BSDi uses. If anyone knows...
This is a seriously beefed up chroot kind of thing. The process
is jailed along the same lines as a chroot does it, but with
additional tough restrictions imposed on what the superuser can do.
For all I know, it is safe to hand over the root bit inside a
prison to the customer living in that prison, this is what
it was developed for in fact: "real virtual servers".
Each prison has an ip number associated with it, which all IP
communications will be coerced to use and each prison has its own
hostname.
Needless to say, you need more RAM this way, but the advantage is
that each customer can run their own particular version of apache
and not stomp on the toes of their neighbors.
It generally does what one would expect, but setting up a jail
still takes a little knowledge.
A few notes:
I have no scripts for setting up a jail, don't ask me for them.
The IP number should be an alias on one of the interfaces.
mount a /proc in each jail, it will make ps more useable.
/proc/<pid>/status tells the hostname of the prison for
jailed processes.
Quotas are only sensible if you have a mountpoint per prison.
There are no privisions for stopping resource-hogging.
Some "#ifdef INET" and similar may be missing (send patches!)
If somebody wants to take it from here and develop it into
more of a "virtual machine" they should be most welcome!
Tools, comments, patches & documentation most welcome.
Have fun...
Sponsored by: http://www.rndassociates.com/
Run for almost a year by: http://www.servetheweb.com/
o use braces to avoid potentially ambiguous else
o don't default to type int (and also remove a useless register
modifier).
o Use parens around assignment values used as truth values.
o Remove unused function.
Reviewed by: obrien and chuckr
70-00 are intepreted in the 20th century; 01-69 in the
21st century. (Yes, 2000 is the last year of the 20th
century, not the first year of the 21st.)
Submitted by: Sergey Babkin <babkin@bellatlantic.net>
before.
Added SYS.h for mipseb and mipsel.
I now get part way through building libc in the cross environment that
I have (along with pending mipse[bl] changes to the intree egcs) with
these changes.
function. It was an ill-considered feature. It didn't solve the
problem I wanted it to solve. And it added Yet Another Version
Number that would have to be maintained at every release point.
I'm nuking it now before anybody grows too fond of it.
Unlike other filesystem objects, symbolic links do not have an owner,
group, access mode, times, etc. Instead, these attributes are taken from
the directory that contains the link. The only attributes returned from
an lstat() that refer to the symbolic link itself are the file type
(S_IFLNK), size, blocks, and link count (always 1).
This is bogus, and disagrees with the implementation and symlink(7).
Removed it.
PR: docs/10269
Submitted by: Tolik <tolik@sibptus.tomsk.ru>
Include <machine/ansi.h> so that this file is self-sufficient again.
Rev.1.6 doesn't do this as claimed unless <nlist.h> has nonstandard
pollution.
Cleaned up includes.
