Commit Graph

279 Commits

Author SHA1 Message Date
Bill Paul
0355003f26 Un-do the changes to the DRIVER_MODULE() declarations in these drivers.
This whole idea isn't going to work until somebody makes the bus/kld
code smarter. The idea here is to change the module's internal name
from "foo" to "if_foo" so that ifconfig can tell a network driver from
a non-network one. However doing this doesn't work correctly no matter
how you slice it. For everything to work, you have to change the name
in both the driver_t struct and the DRIVER_MODULE() declaration. The
problems are:

- If you change the name in both places, then the kernel thinks that
  the device's name is now "if_foo", so you get things like:

if_foo0: <FOO ethernet> irq foo at device foo on pcifoo
if_foo0: Ethernet address: foo:foo:foo:foo:foo:foo

  This is bogus. Now the device name doesn't agree with the logical
  interface name. There's no reason for this, and it violates the
  principle of least astonishment.

- If you leave the name in the driver_t struct as "foo" and only
  change the names in the DRIVER_MODULE() declaration to "if_foo" then
  attaching drivers to child devices doesn't work because the names don't
  agree. This breaks miibus: drivers that need to have miibuses and PHY
  drivers attached never get them.

In other words: damned if you do, damned if you don't.

This needs to be thought through some more. Since the drivers that
use miibus are broken, I have to change these all back in order to
make them work again. Yes this will stop ifconfig from being able
to demand load driver modules. On the whole, I'd rather have that
than having the drivers not work at all.
1999-09-20 19:06:45 +00:00
David E. O'Brien
bd8a15ce8a Change the name we register with DRIVER_MODULE() to include the leading
"if_".

Reviewed by:	msmith, wpaul
1999-09-20 06:50:52 +00:00
Peter Wemm
dd68ef1623 Recognise the new 82559 chip id as used on the InBusiness 10/100 adapter.
I have an 82559 card with the same id as the other 8255[78] chips, but
that was made with a date code of 0699 (June 99).  The submitter shows
this working with the probe etc, but doesn't actually say it works as
on the ethernet. :-) Assuming it does, this is a RELENG_3 merge candidate.
Submitted by:	Steven E Lumos <slumos@sam.ISRI.UNLV.EDU>
1999-09-06 06:15:18 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Dag-Erling Smørgrav
6b5ca0d83e Rename bpfilter to bpf. 1999-07-06 19:23:32 +00:00
Peter Wemm
3f74540725 Fix two warnings. 1999-05-09 10:45:54 +00:00
Doug Rabson
566643e39e Move the declaration of the interrupt type from the driver structure
to the BUS_SETUP_INTR call.
1999-05-08 21:59:43 +00:00
Peter Wemm
6182fdbda8 Bring the 'new-bus' to the i386. This extensively changes the way the
i386 platform boots, it is no longer ISA-centric, and is fully dynamic.
Most old drivers compile and run without modification via 'compatability
shims' to enable a smoother transition.  eisa, isapnp and pccard* are
not yet using the new resource manager.  Once fully converted, all drivers
will be loadable, including PCI and ISA.

(Some other changes appear to have snuck in, including a port of Soren's
 ATA driver to the Alpha.  Soren, back this out if you need to.)

This is a checkpoint of work-in-progress, but is quite functional.

The bulk of the work was done over the last few years by Doug Rabson and
Garrett Wollman.

Approved by:	core
1999-04-16 21:22:55 +00:00
Wes Peters
df373873b5 Turn on PCI bus mastering in driver attach routine
to avoid hanging the system if the BIOS has not
initialized the interface.

PR:		10150
Reviewed by:	dg
1999-03-20 04:51:25 +00:00
Luigi Rizzo
ab090e5b4e MF22... add bridging support to the device drivers. Without this
bridging cannot work on -current/releng3!
1999-03-17 16:44:53 +00:00
Julian Elischer
a728078455 Improved reporting of autodetected speed and duplex.
Now should be able to report speed for cards using NatSemi PHY.
(if you have one please let me know if it works as I
only have the Intel version)

Reviewed by: David Greenman <dg@root.com>
1999-02-12 17:56:23 +00:00
Julian Elischer
da15ec8bf7 Define more registers and fix incorrect (but unused) register bit definitions. 1999-02-11 23:41:21 +00:00
Julian Elischer
f1bf08c22e Define more registers in the PHY unit and use them to report back
the result of the media auto negotiation.

Reviewed by: David Greenman <dg@freebsd.org>
1999-02-11 21:47:10 +00:00
Matthew Dillon
697457a133 Fix warnings related to -Wall -Wcast-qual 1999-01-28 17:32:05 +00:00
Matthew Dillon
8aef171243 Fix warnings in preparation for adding -Wall -Wcast-qual to the
kernel compile
1999-01-28 00:57:57 +00:00
Matthew Dillon
fe08c21a53 Fix warnings in preparation for adding -Wall -Wcast-qual to the
kernel compile.

    This commit includes significant work to proper handle const arguments
    for the DDB symbol routines.
1999-01-27 23:45:44 +00:00
Matthew Dillon
35f069d08b pci_device pd_probe function changed from returning char * to returning
const char *.  Originally I was going to add casts from const char * to
    char * in some of the pci device drivers, but the reality is that the
    pci device probes return constant quoted strings.
1998-12-14 05:47:29 +00:00
David Greenman
c8cc6fca3c Defer rundown (m_freem) of completed transmit buffers for no longer
than 1 second.
1998-10-22 02:00:49 +00:00
David Greenman
91aa9f9055 Clear out transmit descriptor memory in fxp_attach when it's malloced.
fxp_stop is called as the first thing in fxp_init, and if the tx desc
list has junk in it, the system may panic. This bug showed up as a side
effect of the changes in rev 1.56, but has been in the code since the
beginning.
1998-10-11 06:28:54 +00:00
David Greenman
da91462d5e Fixed mbuf leak in fxp_stop(). 1998-10-10 19:26:40 +00:00
David Greenman
3114fdb4c0 Implemented a more sophisticated mechanism for handling transmitter
interrupts which now defers them until the transmit queue if filled
up with completed buffers. This has two advantages: first, it reduces
the number of transmitter interrupts to just 1/120th of the rate
that they occured previously, and two, running down many buffers
at once has much improved cache effects.
1998-08-04 08:53:12 +00:00
David Greenman
35517ab7e8 Added 82555B support for media status. 1998-08-02 00:33:38 +00:00
David Greenman
3614387536 Reordered fxp_softc for optimal cacheline behavior. 1998-08-02 00:29:15 +00:00
David Greenman
b63e51cae4 Killed unused variable/assignment. 1998-08-02 00:28:45 +00:00
Bruce Evans
a09bee1aa8 Fixed pedantic semantics errors (bitfields not of type int, signed int
or unsigned int (this doesn't change the struct layout, size or
alignment in any of the files changed in this commit, at least for
gcc on i386's.  Using bitfields of type u_char may affect size and
alignment but not packing)).
1998-06-08 09:47:47 +00:00
Doug Rabson
ecbb00a262 This commit fixes various 64bit portability problems required for
FreeBSD/alpha.  The most significant item is to change the command
argument to ioctl functions from int to u_long.  This change brings us
inline with various other BSD versions.  Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.

The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
1998-06-07 17:13:14 +00:00
Dag-Erling Smørgrav
dc73342347 Seventy-odd "its" / "it's" typos in comments fixed as per kern/6108. 1998-04-17 22:37:19 +00:00
Bruce Evans
c1087c1324 Support compiling with `gcc -ansi'. 1998-04-15 17:47:40 +00:00
David Greenman
9292429115 Added support for the 82553 and 'B' 82555 PHY. 1998-03-03 14:19:09 +00:00
Bruce Evans
39e4376ba7 Removed unused #includes. 1998-02-20 13:11:54 +00:00
Eivind Eklund
303b270b0a Staticize. 1998-02-09 06:11:36 +00:00
Eivind Eklund
1d5e9e2255 Make INET a proper option.
This will not make any of object files that LINT create change; there
might be differences with INET disabled, but hardly anything compiled
before without INET anyway.  Now the 'obvious' things will give a
proper error if compiled without inet - ipx_ip, ipfw, tcp_debug.  The
only thing that _should_ work (but can't be made to compile reasonably
easily) is sppp :-(

This commit move struct arpcom from <netinet/if_ether.h> to
<net/if_arp.h>.
1998-01-08 23:42:31 +00:00
David Greenman
188e643401 Shuffle things a bit for better cacheline behavior. 1997-11-29 08:11:01 +00:00
Bruce Evans
55b211e3af Removed unused #includes. 1997-10-28 15:59:26 +00:00
David Greenman
483b9871ba Rewrote fxp_start() for better clarity and efficiency. 1997-10-23 01:45:15 +00:00
David Greenman
ced5461ebe Fixed a bug where input packets were counted twice - messing up the
stats.
1997-10-17 06:27:44 +00:00
David Greenman
3f3a8e84cd Killed a gratuitous assignment in a NetBSD case. 1997-09-30 11:28:24 +00:00
David Greenman
6f5818b074 Two changes which should make the system less suseptible to receiver
overruns (not that it was a problem, but it could be):

1) Doubled the number of receive buffers in the DMA chain to 64.
2) Do packet receive processing before transmit in the interrupt routine.
1997-09-30 10:50:45 +00:00
David Greenman
397f9dfe26 Work around a bug in the 82557 NIC where the receiver will lock up
if it is in 10Mbps mode and gets certain types of garbage prior to
the packet header. The work-around involves reprogramming the
multicast filter if nothing is received in some number of seconds
(currently set at 15). As a side effect, implemented complete support
for multicasting rather than the previous 'receive all multicasts'
hack, since we now have the ability to program the filter table.
Fixed a serious bug which crept in with the timeout() changes;
the cookie was only saved on the first timeout() call in fxp_init()
and wasn't updated in the most common place in fxp_stats_update()
when the timeout was rescheduled. This bug would have resulted in
an eventual panic if fxp_stop() was called (which happens when any
interface flags are changed, for example).
Fixed a bug in Alpha support that would have caused the TxCB
descriptor chain to span a page boundry, causing serious problems
if the pages didn't happen to be contiguous.
Removed some gratuitous bit masking that was left over from an
older implementation.
Fixed a bug where too much was copied from the configuration
template, spilling over into memory that followed it.
Fixed handling of if_timer...it was cleared too early in some cases.
1997-09-29 11:27:43 +00:00
Justin T. Gibbs
6c951b4441 Update for new callout interface. 1997-09-21 22:02:25 +00:00
David Greenman
ba8c6fd534 Changes to support NetBSD and the new ifmedia extensions.
Submitted by:	Jason Thorpe <thorpej@netbsd.org>
1997-09-05 10:23:58 +00:00
Bruce Evans
1fd0b0588f Removed unused #includes. 1997-08-02 14:33:27 +00:00
David Greenman
dd0ebb7f08 Added support for the Seeq 80c24 PHY; does nothing except disable the
unsupported warning message for it.
1997-07-25 23:41:12 +00:00
David Greenman
3729f8481a Minor optimization in fxp_intr. 1997-06-16 04:45:57 +00:00
David Greenman
854d14213e Added support for the Intel 82555 PHY chip which is being used on newer
Pro/100B cards. Full duplex should work now, although it hasn't been
tested.
1997-06-13 22:34:52 +00:00
David Greenman
0633918017 Check that the received packet length indicated by the card is at least
large enough to contain the ethernet header. There appears to be a
condition where the card can return "0" in some failure cases, and this
causes bad things to happen (a panic).
1997-04-23 01:44:30 +00:00
David Greenman
6318197e68 Made a couple of minor optimizations that improve performance of the
common case of the interrupt routine by about 20%.
1997-03-25 14:54:38 +00:00
Bruce Evans
51a534883a Don't include <sys/ioctl.h> in the kernel. Stage 2: include
<sys/sockio.h> instead of <sys/ioctl.h> in network files.
1997-03-24 11:33:46 +00:00
David Greenman
6ebc315326 Added support for newer cards that have the DP83840A PHY chip.
Fixed a bug in fxp_mdi_write - a hex number was missing a preceding 0x
and this was causing the routine to not wait for a PHY write to complete.
Added support for link0, link1, and link2 flags to toggle auto-
negotiation, 10/100, and half/full duplex:

link0	disable auto-negotiation

	When set, these flags then have meaning:

	-link1	10Mbps
	link1	100Mbps
	-link2	half duplex
	link2	full duplex

...needs a manual page.
1997-03-21 08:00:13 +00:00
David Greenman
dccee1a193 Fixed two deficiencies in the driver that have existed since it was
written:

1) Full duplex mode is now supported (and works!)
2) The 10Mbps-only PCI Pro/10 should now work (untested, however)

Thanks to Justin Gibbs for providing a PCI bus analyzer trace while the
Intel Windows driver was configuring the board...this made it possible
to figure out the mystery bit that I wasn't setting in the PHY for full
duplex to work.
1997-03-17 11:08:16 +00:00
Peter Wemm
6875d25465 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00
David Greenman
001696da5b Changed several configuration options:
Disabled the DMA byte counters - I had it this way originally and this is
the recommended setting.
Set crscdt to CRS only (0) since this is what it should be for an MII PHY.
Also fixed some comments.
1997-02-04 11:44:15 +00:00
David Greenman
33d14d8671 Do "selective" reset rather than full reset...the manual specifically
says not to do the full reset because it can lock up the PCI bus if the
chip is active. Added various PORT command definitions to facilitate
this.
1997-02-04 10:53:12 +00:00
David Greenman
6e39e59963 Don't include the short-frames counter in with the input errors. This
counter is incremented on all short frames, including those that are
the result of collisions.
1997-02-04 07:39:28 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Garrett Wollman
477180fbc8 Use the new if_multiaddrs list for multicast addresses rather than the
previous hackery involving struct in_ifaddr and arpcom.  Get rid of the
abominable multi_kludge.  Update all network interfaces to use the
new machanism.  Distressingly few Ethernet drivers program the multicast
filter properly (assuming the hardware has one, which it usually does).
1997-01-13 21:26:53 +00:00
David Greenman
fb5831565c 1) Implement SIOCSIFMTU in ether_ioctl(), and change ether_ioctl's return
type to be int so that errors can be returned.
2) Use the new SIOCSIFMTU ether_ioctl support in the few drivers that are
   using ether_ioctl().
3) In if_fxp.c: treat if_bpf as a token, not as a pointer. Don't bother
   testing for FXP_NTXSEG being reached in fxp_start()...just check for
   non-NULL 'm'. Change fxp_ioctl() to use ether_ioctl().
1996-12-10 07:29:50 +00:00
David Greenman
9c7d26071e Fixed obsolete comment. 1996-11-18 02:45:46 +00:00
Bruce Evans
4458ac71b1 Removed nested include if <sys/socket.h> from <net/if.h> and
<net/if_arp.h> and fixed the things that depended on it.  The nested
include just allowed unportable programs to compile and made my
simple #include checking program report that networking code doesn't
need to include <sys/socket.h>.
1996-10-12 19:49:43 +00:00
David Greenman
78fb85bbf7 Backed out one of my "performance optimizations" as it results in sometimes
not resuming the NIC as required for transmit. Thanks to Alan Cox
<alc@cs.rice.edu> for noticing this.
Added another performance optimization to compensate. :-)

Changed crscdt to 1...strange, but this seems to be needed for some reason
despite what the manual says.
1996-09-29 10:20:45 +00:00
David Greenman
1cd443ace8 Fixed a bug with the management of the pointer to the first TxCB in the
ring that caused wrong things to happen sometimes.
Doubled the number of transmit descriptors to 128 so that the internal
FIFO in the NIC can be fully filled when dealing with small packets.
Several minor performance improvements.
1996-09-22 11:48:54 +00:00
David Greenman
eadd5e3a24 Fixed a bug in the receive buffer allocation code that resulted in a
panic if an mbuf cluster couldn't be allocated. This was caused by a
failure to re-initialize m_data when the old mbuf/mbcluster was recycled.
1996-09-20 11:05:39 +00:00
David Greenman
4a684684f4 When the devconf stuff was ripped out of the kernel, the ripper neglected
to deal with the fact that we relied on devconf to do the shutdown
callouts in various drivers. The changes in this commit are to add support
for device shutdown in this driver via the new at_shutdown() mechanism.
Similar changes need to be made to all of the other drivers that need
a shutdown routine called (if_de.c comes to mind immediately).
1996-09-20 04:11:53 +00:00
David Greenman
f9be9005ce Implemented a better, dynamic, mechanism for adjusting the transmit
threshold.
1996-09-19 09:15:20 +00:00
David Greenman
7af18210c3 Increased transmit threshold to 1024 bytes to fix a problem with underruns
on machines with poor PCI performance.
1996-09-18 16:18:05 +00:00
Poul-Henning Kamp
bfbb029d87 Remove devconf, it never grew up to be of any use. 1996-09-06 23:09:20 +00:00
Gary Palmer
a330e1f1a5 Set ifnet.baudrate for ethernet / FDDI interfaces too. Makes
SNMP slightly more informative

Reviewed by: Garrett Wollman
1996-06-01 23:25:10 +00:00
David Greenman
58b248e254 Removed sections 3 and 4 from my copyright. 1996-04-08 01:31:42 +00:00
Garrett Wollman
9b44ff2214 Clean up Ethernet drivers:
- fill in and use ifp->if_softc
	- use if_bpf rather than private cookie variables
	- change bpf interface to take advantage of this
	- call ether_ifattach() directly from Ethernet drivers
	- delete kludge in if_attach() that did this indirectly
1996-02-06 18:51:28 +00:00
Poul-Henning Kamp
18b7be4064 The last part of the ether_sprint -> %6D change.
Sorry for the delay.
(%D is for hexdumping.)
1996-01-26 09:29:29 +00:00
Stefan Eßer
dd7610fca4 Make PCI interrupt handlers return void like everybody else does.
Reviewed by:	davidg
1996-01-23 21:48:28 +00:00
David Greenman
ae12cdda30 This driver really is for the Pro/100B and not for the Pro/100 (and in fact
doesn't even work with a Pro/100)...updated to reflect this.
1996-01-15 10:12:41 +00:00
David Greenman
3ba657329e Reworked the stop/reset code to properly run-down allocated buffers and
made the code detect and handle wedged cards.
1996-01-03 05:22:32 +00:00
David Greenman
10521e6da6 Added prototype for fxp_scb_wait() and fixed a bug where the wrong pointer
was passed in one case.
1995-12-18 02:47:43 +00:00
David Greenman
efeaf95a41 Untangled the vm.h include file spaghetti. 1995-12-07 12:48:31 +00:00
David Greenman
23a0ed7c08 Increased the number of Tx segments from 13 to 29 to reduce the need to
recopy to near zero. Wrote the necessary code to recopy the mbuf chain
into another buffer if there are too many mbufs in the chain.
1995-12-05 11:49:55 +00:00
David Greenman
4a5f1499b0 all:
Removed ifnet.if_init and ifnet.if_reset as they are generally unused.
Change the parameter passed to if_watchdog to be a ifnet * rather than
a unit number. All of this is an attempt to move toward not needing an
array of softc pointers (which is usually static in size) to point to
the driver softc.

if_ed.c:
Changed some of the argument passing to some functions to make a little
more sense.

if_ep.c, if_vx.c:
Killed completely bogus use of if_timer. It was being set in such a way
that the interface was being reset once per second (blech!).
1995-12-05 02:01:59 +00:00
David Greenman
dfe61cf102 Fix minor bug that would cause the packet statistics updates to stop
working under extremely rare circumstances. Also added some additional
comments..
1995-12-01 22:41:56 +00:00
David Greenman
a17c678ed2 Device driver for Intel Pro/100 PCI Fast Ethernet controller. 1995-11-28 23:55:26 +00:00