Commit Graph

112 Commits

Author SHA1 Message Date
Marius Strobl
4b7ec27007 - There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
  (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
  since r52045) but even recently added device drivers do this unnecessarily.
  Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
  Discussed with: jhb
- Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00
Marius Strobl
8c1093fc50 - Import the common MII bitbang'ing code from NetBSD and convert drivers to
take advantage of it instead of duplicating it. This reduces the size of
  the i386 GENERIC kernel by about 4k. The only potential in-tree user left
  unconverted is xe(4), which generally should be changed to use miibus(4)
  instead of implementing PHY handling on its own, as otherwise it makes not
  much sense to add a dependency on miibus(4)/mii_bitbang(4) to xe(4) just
  for the MII bitbang'ing code. The common MII bitbang'ing code also is
  useful in the embedded space for using GPIO pins to implement MII access.
- Based on lessons learnt with dc(4) (see r185750), add bus barriers to the
  MII bitbang read and write functions of the other drivers converted in
  order to ensure the intended ordering. Given that register access via an
  index register as well as register bank/window switching is subject to the
  same problem, also add bus barriers to the respective functions of smc(4),
  tl(4) and xl(4).
- Sprinkle some const.

Thanks to the following testers:
Andrew Bliznak (nge(4)), nwhitehorn@ (bm(4)), yongari@ (sis(4) and ste(4))
Thanks to Hans-Joerg Sirtl for supplying hardware to test stge(4).

Reviewed by:	yongari (subset of drivers)
Obtained from:	NetBSD (partially)
2011-11-01 16:13:59 +00:00
Pyun YongHyeon
57c81d92ae Close a race where SIOCGIFMEDIA ioctl get inconsistent link status.
Because driver is accessing a common MII structure in
mii_pollstat(), updating user supplied structure should be done
before dropping a driver lock.

Reported by:	Karim (fodillemlinkarimi <> gmail dot com)
2011-10-17 19:49:00 +00:00
Marius Strobl
3fcb7a5365 - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP
(reporting IFM_LOOP based on BMCR_LOOP is left in place though as
  it might provide useful for debugging). For most mii(4) drivers it
  was unclear whether the PHYs driven by them actually support
  loopback or not. Moreover, typically loopback mode also needs to
  be activated on the MAC, which none of the Ethernet drivers using
  mii(4) implements. Given that loopback media has no real use (and
  obviously hardly had a chance to actually work) besides for driver
  development (which just loopback mode should be sufficient for
  though, i.e one doesn't necessary need support for loopback media)
  support for it is just dropped as both NetBSD and OpenBSD already
  did quite some time ago.
- Let mii_phy_add_media() also announce the support of IFM_NONE.
- Restructure the PHY entry points to use a structure of entry points
  instead of discrete function pointers, and extend this to include
  a "reset" entry point. Make sure any PHY-specific reset routine is
  always used, and provide one for lxtphy(4) which disables MII
  interrupts (as is done for a few other PHYs we have drivers for).
  This includes changing NIC drivers which previously just called the
  generic mii_phy_reset() to now actually call the PHY-specific reset
  routine, which might be crucial in some cases. While at it, the
  redundant checks in these NIC drivers for mii->mii_instance not being
  zero before calling the reset routines were removed because as soon
  as one PHY driver attaches mii->mii_instance is incremented and we
  hardly can end up in their media change callbacks etc if no PHY driver
  has attached as mii_attach() would have failed in that case and not
  attach a miibus(4) instance.
  Consequently, NIC drivers now no longer should call mii_phy_reset()
  directly, so it was removed from EXPORT_SYMS.
- Add a mii_phy_dev_attach() as a companion helper to mii_phy_dev_probe().
  The purpose of that function is to perform the common steps to attach
  a PHY driver instance and to hook it up to the miibus(4) instance and to
  optionally also handle the probing, addition and initialization of the
  supported media. So all a PHY driver without any special requirements
  has to do in its bus attach method is to call mii_phy_dev_attach()
  along with PHY-specific MIIF_* flags, a pointer to its PHY functions
  and the add_media set to one. All PHY drivers were updated to take
  advantage of mii_phy_dev_attach() as appropriate. Along with these
  changes the capability mask was added to the mii_softc structure so
  PHY drivers taking advantage of mii_phy_dev_attach() but still
  handling media on their own do not need to fiddle with the MII attach
  arguments anyway.
- Keep track of the PHY offset in the mii_softc structure. This is done
  for compatibility with NetBSD/OpenBSD.
- Keep track of the PHY's OUI, model and revision in the mii_softc
  structure. Several PHY drivers require this information also after
  attaching and previously had to wrap their own softc around mii_softc.
  NetBSD/OpenBSD also keep track of the model and revision on their
  mii_softc structure. All PHY drivers were updated to take advantage
  as appropriate.
- Convert the mebers of the MII data structure to unsigned where
  appropriate. This is partly inspired by NetBSD/OpenBSD.
- According to IEEE 802.3-2002 the bits actually have to be reversed
  when mapping an OUI to the MII ID registers. All PHY drivers and
  miidevs where changed as necessary. Actually this now again allows to
  largely share miidevs with NetBSD, which fixed this problem already
  9 years ago. Consequently miidevs was synced as far as possible.
- Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that
  weren't explicitly converted to support flow control before. It's
  unclear whether flow control actually works with these but typically
  it should and their net behavior should be more correct with these
  changes in place than without if the MAC driver sets MIIF_DOPAUSE.

Obtained from:	NetBSD (partially)
Reviewed by:	yongari (earlier version), silence on arch@ and net@
2011-05-03 19:51:29 +00:00
John Baldwin
3b0a4aef96 Do a sweep of the tree replacing calls to pci_find_extcap() with calls to
pci_find_cap() instead.
2011-03-23 13:10:15 +00:00
Marius Strobl
d6c65d276e Converted the remainder of the NIC drivers to use the mii_attach()
introduced in r213878 instead of mii_phy_probe(). Unlike r213893 these
are only straight forward conversions though.

Reviewed by:	yongari
2010-10-15 15:00:30 +00:00
Robert Watson
eb956cd041 Use if_maddr_rlock()/if_maddr_runlock() rather than IF_ADDR_LOCK()/
IF_ADDR_UNLOCK() across network device drivers when accessing the
per-interface multicast address list, if_multiaddrs.  This will
allow us to change the locking strategy without affecting our driver
programming interface or binary interface.

For two wireless drivers, remove unnecessary locking, since they
don't actually access the multicast address list.

Approved by:	re (kib)
MFC after:	6 weeks
2009-06-26 11:45:06 +00:00
Attilio Rao
56e13f2ac1 Unbreak build.
Pointy hat to:	attilio
2009-05-30 18:39:22 +00:00
Pyun YongHyeon
f6bc943047 bus_dma(9) conversion and make nge(4) work on all architectures.
o Header file cleanup.
o bus_dma(9) conversion.
  - Removed all consumers of vtophys(9) and converted to use
    bus_dma(9).
  - 64bit DMA support was disabled because DP83821 is not capable
    of handling the DMA request. 64bit DMA request on DP83820
    requires different descriptor structures and it's hard to
    dynamically change descriptor format at run time so I disabled
    it. Note, this is the same behavior as previous one but
    previously nge(4) didn't explicitly disable 64bit mode on
    DP83820.
  - Added Tx/Rx descriptor ring alignment requirements(8 bytes
    alignment).
  - Limit maximum number of Tx DMA segments to 16. In fact,
    controller does not seem to have limitations on number of Tx
    DMA segments but 16 should be enough for most cases and
    m_collapse(9) will handle highly fragmented frames without
    consuming a lot of CPU cycles.
  - Added Rx buffer alignment requirements(8 bytes alignment). This
    means driver should fixup received frames to align on 16bits
    boundary on strict-alignment architectures.
  - Nuked driver private data structure in descriptor ring.
  - Added endianness support code in Tx/Rx descriptor access.
o Prefer faster memory mapped register access to I/O mapped access.
   Added fall-back mechanism to use alternative register access.
   The hardware supports both memory and I/O mapped access.
o Added suspend/resume methods but it wasn't tested as controller I
  have does not support PCI PME.
o Removed swap argument in nge_read_eeprom() since endianness
  should be handled after reading EEPROM.
o Implemented experimental 802.3x full-duplex flow-control. ATM
  it was commented out but will be activated after we have generic
  flow-control framework in mii(4) layer.
o Rearranged promiscuous mode settings and simplified logic.
o Always disable Rx filter prior to changing Rx filter functions as
  indicated in DP83820/DP83821 datasheet.
o Added an explicit DELAY in timeout loop of nge_reset().
o Added a sysctl variable dev.nge.%d.int_holdoff to control
  interrupt moderation. Valid ranges are 1 to 255(default 1) in
  units of 100us. The actual delivery of interrupt would be delayed
  based on the sysctl value. The interface has to be brought down
  and up again before a change takes effect. With proper tuning
  value, users do not need to resort to polling(4) anymore.
o Added ALTQ(4) support.
o Added missing IFCAP_VLAN_HWCSUM as nge(4) can offload Tx/Rx
  checksum calculation on VLAN tagged frames as well as VLAN tag
  insertion/stripping. Also add IFCAP_VLAN_MTU capability as nge(4)
  can handle VLAN tagged oversized frames.
o Fixed media header length for VLAN.
o Rearranged nge_detach routine such that it's now used for general
  clean-up routine.
o Enabled MWI.
o Accessing EEPROM takes very long time so read 6 bytes ethernet
  address with one call instead of 3 separate accesses.
o Don't set if_mtu in device attach, it's already set in
  ether_ifattach().
o Don't do any special things for TBI interface. Remove TBI
  specific media handling in the driver and have gentbi(4) handle
  it. Add glue code to read/write TBI PHY registers in miibus
  method. This change removes a lot of PHY handling code in driver
  and now its functionality is handled by mii(4).
o Alignment fixup code is now applied only for strict-alignment
  architectures. Previously the code was applied for all
  architectures except i386. With this change amd64 will get
  instant Rx performance boost.
o When driver fails to allocate a new mbuf, update if_qdrops so
  users can see what was wrong in Rx path.
o Added a workaround for a hardware bug which resulted in short
  VLAN tagged frames(e.g. ARP) was rejected as if runt frame was
  received. With this workaround nge(4) now accepts the short VLAN
  tagged frame and nge(4) can take full advantage of hardware VLAN
  tag stripping. I have no idea how this bug wasn't known so far,
  without the workaround nge(4) may never work on VLAN
  environments.
o Fixed Rx checksum offload logic such that it now honors active
  interface capability configured with ifconfig(8).
o In nge_start()/nge_txencap(), always leave at least one free
  descriptor as indicated in datasheet. Without this the hardware
  would be confused with ring descriptor structure(e.g. no clue
  for the end of descriptor ring).
o Removed dead-code that checks interrupts on PHY hardware. The
  code was designed to detect link state changes but it was
  disabled as driving nge_tick clock would break auto-negotiation
  timer. This code is no longer needed as nge(4) now uses mii(4)
  and link state change handling is done with mii callback.
o Rearranged ethernet address programming logic such that it works
   on strict-alignment architectures.
o Added IFCAP_VLAN_HWTAGGING/IFCAP_VLAN_HWCSUM handler in
   nge_ioctl() such that the functionality is configurable with
   ifconfig(8). DP83820/DP83821 can do checksum offload for VLAN
   tagged frames so enable Tx/Rx checksum offload for VLAN
   interfaces.
o Simplified IFCAP_POLLING selection logic in nge_ioctl().
o Fixed module unload panic when bpf listeners are active.
o Tx/Rx descriptor ring address uses 64bit DMA address for
   readability. High address part of DMA would be 0 as nge(4)
   disabled 64bit DMA transfers so it's ok for DP83821.
o Removed volatile keyword in softc as bus_dmamap_sync(9) should
   take care of this.
o Removed extra driver private structures in descriptor ring. These
   extra elements are not part of descriptor structure. Embedding
   private driver structure into descriptor ring is not good idea
   as its size may be different on 32bit/64bit architectures.
o Added miibus_linkchg method handler to catch link state changes.
o Removed unneeded nge_ifmedia in softc. All TBI access is handled
  in gentbi(4). There is no difference between TBI and non-TBI case
  now.
o Removed "gigabit link up" message handling in nge_tick. Link
  state change notification is already performed by mii(4) and
  checking link state by accessing PHY registers in periodic timer
  handler of driver is wrong. All link state and speed/duplex
  monitoring should be handled in PHY driver.
o Use our own timer for watchdog instead of if_watchdog/if_timer
  interface.
o Added hardware MAC statistics counter, users canget current MAC
  statistics from dev.nge.%d.stats sysctl node(%d is unit number of
  a device).
o Removed unused macros, NGE_LASTDESC, NGE_MODE, NGE_OWNDESC,
  NGE_RXBYTES.
o Increased number of Tx/Rx descriptors from 128 to 256. From my
  experience on gigabit ethernet controllers, number of descriptors
  should be 256 or higher to get an optimal performance on gigabit
  link.
o Increased jumbo frame length to 9022 bytes to cope with other
  gigabit ethernet drivers. Experimentation shows no problems with
  9022 bytes.
o Removed unused member variables in softc.
o Switched from bus_space_{read|write}_4 to bus_{read|write}_4.
o Added support for WOL.
2009-05-21 02:12:10 +00:00
Pyun YongHyeon
a315e86aad Remove extra parenthesis used in macros. These macros are not used
in driver, though.
2009-05-18 07:13:42 +00:00
Pyun YongHyeon
056e0442f6 Consistently use tab characters instead of spaces. 2009-05-18 07:10:48 +00:00
Pyun YongHyeon
6f94c0fd17 style(9) 2009-05-18 07:04:03 +00:00
Pyun YongHyeon
3929ff51cf s/u_int8_t/uint8_t/g
s/u_int16_t/uint16_t/g
s/u_int32_t/uint32_t/g
2009-05-18 06:32:38 +00:00
Pyun YongHyeon
25d7155f3d style(9) - space after keyword. 2009-05-18 06:19:17 +00:00
Pyun YongHyeon
2da9a170c0 Remove return statement at the end of functions that return void. 2009-05-18 06:13:56 +00:00
Pyun YongHyeon
a13d350293 Remove trailling whitespaces. 2009-05-18 06:09:10 +00:00
Pyun YongHyeon
2cf2d79999 Remove register keyword. 2009-05-18 06:05:50 +00:00
Pyun YongHyeon
284c81cbcb Use ANSI C declarations for all functions. 2009-05-18 06:02:54 +00:00
Pyun YongHyeon
6a087a8722 Fix function prototype for device_shutdown method. 2007-11-22 02:45:00 +00:00
Christian S.J. Peron
59a0d28bac Catch up the rest of the drivers with the ether_vlan_mtap modifications.
If these drivers are setting M_VLANTAG because they are stripping the
layer 2 802.1Q headers, then they need to be re-inserting them so any
bpf(4) peers can properly decode them.

It should be noted that this is compiled tested only.

MFC after:	3 weeks
2007-03-04 03:38:08 +00:00
Paolo Pisati
ef544f6312 o break newbus api: add a new argument of type driver_filter_t to
bus_setup_intr()

o add an int return code to all fast handlers

o retire INTR_FAST/IH_FAST

For more info: http://docs.freebsd.org/cgi/getmsg.cgi?fetch=465712+0+current/freebsd-current

Reviewed by: many
Approved by: re@
2007-02-23 12:19:07 +00:00
Andre Oppermann
78ba57b9e1 Move ethernet VLAN tags from mtags to its own mbuf packet header field
m_pkthdr.ether_vlan.  The presence of the M_VLANTAG flag on the mbuf
signifies the presence and validity of its content.

Drivers that support hardware VLAN tag stripping fill in the received
VLAN tag (containing both vlan and priority information) into the
ether_vtag mbuf packet header field:

	m->m_pkthdr.ether_vtag = vlan_id;	/* ntohs()? */
	m->m_flags |= M_VLANTAG;

to mark the packet m with the specified VLAN tag.

On output the driver should check the mbuf for the M_VLANTAG flag to
see if a VLAN tag is present and valid:

	if (m->m_flags & M_VLANTAG) {
		... = m->m_pkthdr.ether_vtag;	/* htons()? */
		... pass tag to hardware ...
	}

VLAN tags are stored in host byte order.  Byte swapping may be necessary.

(Note: This driver conversion was mechanic and did not add or remove any
byte swapping in the drivers.)

Remove zone_mtag_vlan UMA zone and MTAG_VLAN definition.  No more tag
memory allocation have to be done.

Reviewed by:	thompsa, yar
Sponsored by:	TCP/IP Optimization Fundraise 2005
2006-09-17 13:33:30 +00:00
Gleb Smirnoff
6b9f5c941c - Consistently use if_printf() only in interface methods: if_start(),
if_watchdog, etc., or in functions used only in these methods.
  In all other functions in the driver use device_printf().
- Use __func__ instead of typing function name.

Submitted by:	Alex Lyashkov <umka sevcity.net>
2006-09-15 15:16:12 +00:00
Poul-Henning Kamp
c40da00ca3 Since DELAY() was moved, most <machine/clock.h> #includes have been
unnecessary.
2006-05-16 14:37:58 +00:00
John Baldwin
73dbd3da73 Remove various bits of conditional Alpha code and fixup a few comments. 2006-05-12 05:04:46 +00:00
Gleb Smirnoff
23033eebf4 Do not touch ifp->if_baudrate in miibus aware drivers. 2006-02-14 12:44:56 +00:00
Gleb Smirnoff
d147662cd3 - Fix VLAN_INPUT_TAG() macro, so that it doesn't touch mtag in
case if memory allocation failed.
- Remove fourth argument from VLAN_INPUT_TAG(), that was used
  incorrectly in almost all drivers. Indicate failure with
  mbuf value of NULL.

In collaboration with:	yongari, ru, sam
2005-12-18 18:24:27 +00:00
Ruslan Ermilov
4a0d6638b3 - Store pointer to the link-level address right in "struct ifnet"
rather than in ifindex_table[]; all (except one) accesses are
  through ifp anyway.  IF_LLADDR() works faster, and all (except
  one) ifaddr_byindex() users were converted to use ifp->if_addr.

- Stop storing a (pointer to) Ethernet address in "struct arpcom",
  and drop the IFP2ENADDR() macro; all users have been converted
  to use IF_LLADDR() instead.
2005-11-11 16:04:59 +00:00
Warner Losh
7b279558cc Replace FreeBSD 3.x syntax (controller miibus0) with 4.x syntax
(device miibus) in time for 7.0 :-)
2005-10-22 05:06:55 +00:00
John Baldwin
646abee6e3 Minor tweaks and fixups:
- Use device_printf() and if_printf() and remove nge_unit.
- Use callout_init_mtx() and remove nge_tick_locked() as nge_tick() is now
  always called with the driver lock held.
- Use M_ZERO to contigmalloc() when allocating nge_ldata.  It was possible
  for the random garbage to be used in certain cases otherwise.
- Cleanup attach error handling including no longer leaking nge_ldata.
- Add locking to the ifmedia callouts.
- Lock accesses to if_hwassist and if_capenable in nge_ioctl().

Submitted by:	Yuriy N. Shkandybin jura at networks dot ru (1, 3, 4)
Tested by:	Yuriy N. Shkandybin jura at networks dot ru
MFC after:	3 days
2005-10-13 20:22:07 +00:00
Gleb Smirnoff
f0796cd26c - Don't pollute opt_global.h with DEVICE_POLLING and introduce
opt_device_polling.h
- Include opt_device_polling.h into appropriate files.
- Embrace with HAVE_KERNEL_OPTION_HEADERS the include in the files that
  can be compiled as loadable modules.

Reviewed by:	bde
2005-10-05 10:09:17 +00:00
Gleb Smirnoff
4092996774 Big polling(4) cleanup.
o Axe poll in trap.

o Axe IFF_POLLING flag from if_flags.

o Rework revision 1.21 (Giant removal), in such a way that
  poll_mtx is not dropped during call to polling handler.
  This fixes problem with idle polling.

o Make registration and deregistration from polling in a
  functional way, insted of next tick/interrupt.

o Obsolete kern.polling.enable. Polling is turned on/off
  with ifconfig.

Detailed kern_poll.c changes:
  - Remove polling handler flags, introduced in 1.21. The are not
    needed now.
  - Forget and do not check if_flags, if_capenable and if_drv_flags.
  - Call all registered polling handlers unconditionally.
  - Do not drop poll_mtx, when entering polling handlers.
  - In ether_poll() NET_LOCK_GIANT prior to locking poll_mtx.
  - In netisr_poll() axe the block, where polling code asks drivers
    to unregister.
  - In netisr_poll() and ether_poll() do polling always, if any
    handlers are present.
  - In ether_poll_[de]register() remove a lot of error hiding code. Assert
    that arguments are correct, instead.
  - In ether_poll_[de]register() use standard return values in case of
    error or success.
  - Introduce poll_switch() that is a sysctl handler for kern.polling.enable.
    poll_switch() goes through interface list and enabled/disables polling.
    A message that kern.polling.enable is deprecated is printed.

Detailed driver changes:
  - On attach driver announces IFCAP_POLLING in if_capabilities, but
    not in if_capenable.
  - On detach driver calls ether_poll_deregister() if polling is enabled.
  - In polling handler driver obtains its lock and checks IFF_DRV_RUNNING
    flag. If there is no, then unlocks and returns.
  - In ioctl handler driver checks for IFCAP_POLLING flag requested to
    be set or cleared. Driver first calls ether_poll_[de]register(), then
    obtains driver lock and [dis/en]ables interrupts.
  - In interrupt handler driver checks IFCAP_POLLING flag in if_capenable.
    If present, then returns.This is important to protect from spurious
    interrupts.

Reviewed by:	ru, sam, jhb
2005-10-01 18:56:19 +00:00
Warner Losh
ad4f426ef6 Make sure that we call if_free(ifp) after bus_teardown_intr. Since we
could get an interrupt after we free the ifp, and the interrupt
handler depended on the ifp being still alive, this could, in theory,
cause a crash.  Eliminate this possibility by moving the if_free to
after the bus_teardown_intr() call.
2005-09-19 03:10:21 +00:00
Ruslan Ermilov
5ae7c95cc3 Add two missing if_free() calls. 2005-09-15 20:06:44 +00:00
Robert Watson
13f4c340ae Propagate rename of IFF_OACTIVE and IFF_RUNNING to IFF_DRV_OACTIVE and
IFF_DRV_RUNNING, as well as the move from ifnet.if_flags to
ifnet.if_drv_flags.  Device drivers are now responsible for
synchronizing access to these flags, as they are in if_drv_flags.  This
helps prevent races between the network stack and device driver in
maintaining the interface flags field.

Many __FreeBSD__ and __FreeBSD_version checks maintained and continued;
some less so.

Reviewed by:	pjd, bz
MFC after:	7 days
2005-08-09 10:20:02 +00:00
Robert Watson
13b203d0d7 Modify device drivers supporting multicast addresses to lock if_addr_mtx
over iteration of their multicast address lists when synchronizing the
hardware address filter with the network stack-maintained list.

Problem reported by:	Ed Maste (emaste at phaedrus dot sandvine dot ca>
MFC after:		1 week
2005-08-03 00:18:35 +00:00
Brooks Davis
fc74a9f93a Stop embedding struct ifnet at the top of driver softcs. Instead the
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.

This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.

Other changes of note:
 - Struct arpcom is no longer referenced in normal interface code.
   Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
   To enforce this ac_enaddr has been renamed to _ac_enaddr.
 - The second argument to ether_ifattach is now always the mac address
   from driver private storage rather than sometimes being ac_enaddr.

Reviewed by:	sobomax, sam
2005-06-10 16:49:24 +00:00
Yoshihiro Takahashi
d4fcf3cba5 Remove bus_{mem,p}io.h and related code for a micro-optimization on i386
and amd64.  The optimization is a trivial on recent machines.

Reviewed by:	-arch (imp, marcel, dfr)
2005-05-29 04:42:30 +00:00
Sam Leffler
6c772336f0 fix null ptr deref when nge_newbuf is called with an existing mbuf
Noticed by:	Coverity Prevent analysis tool
2005-03-28 17:49:03 +00:00
Sam Leffler
2307fc820c deref correct mbuf ptr to collect any vlan tag
Noticed by:	Coverity Prevent analysis tool
2005-03-26 18:47:17 +00:00
Warner Losh
6b9907e7f8 Use BUS_PROBE_DEFAULT for pci probe return value 2005-03-05 18:10:49 +00:00
Warner Losh
098ca2bda9 Start each of the license/copyright comments with /*-, minor shuffle of lines 2005-01-06 01:43:34 +00:00
Poul-Henning Kamp
6d6b7a18aa Hide link up/down/media printfs behind bootverbose 2004-11-08 19:21:57 +00:00
Alan Cox
5a71a6fe52 Fix a typo that affects !i386. 2004-09-15 03:39:18 +00:00
Bill Paul
6ba160b6ef Add missing NGE_LOCK_DESTROY() to nge_detach(). 2004-09-14 22:32:58 +00:00
Bill Paul
ad6c618bc7 Make two major changes to this code to address some stability/corruption
problems:

1) Add locking for SMP, code provided by Alan Cox
2) While testing Alan's patches, I observed serious problems with
   the jumbo buffer allocation code (machine crashed twice), so I gutted
   it and rewrote the receive handler to use multiple chained descriptors.
   Each RX descriptor gets a single 2K cluster, and the chip will fill in
   as many as it needs to hold the complete packet.

User reports that this corrects the data corruption issues previously
observed and discussed on -current.

Note that this driver still needs to be hit with the busdma stick.
I intend to inflict said beating in the near future.

MFC after: 1 week
2004-09-14 22:06:25 +00:00
Robert Watson
fc4af83ae9 Since if_nge doesn't contain locking or run with INTR_MPSAFE, mark
the interface as IFF_NEEDSGIANT so if_start is run holding Giant.

Note: this driver does declare and occasionally reference mutexes,
but I believe not nearly enough to provide safety.
2004-08-13 23:22:53 +00:00
Warner Losh
794950069f Remove the setting of the pci config variables on power state changes.
The bus does this now.
2004-06-28 20:26:21 +00:00
Christian Weisgerber
0e939c0cea Replace handrolled CRC calculation with ether_crc32_[lb]e(). 2004-06-09 14:34:04 +00:00
Poul-Henning Kamp
fe12f24bb0 Add missing <sys/module.h> includes 2004-05-30 20:08:47 +00:00