This setting limits the amount of memory that can be allocated to UMA.
On systems with a direct map and ample KVA, however, there is no reason
for VM_KMEM_SIZE_SCALE to be larger than 1. This appears to have been
inherited from the 32-bit ARM platform definitions.
Also remove VM_KMEM_SIZE_MIN, which is not needed when
VM_KMEM_SIZE_SCALE is defined to be 1.[*]
Reviewed by: alc, kp, kib
Reported by: alc [*]
Submitted by: Klara, Inc.
Sponsored by: Ampere Computing
Differential Revision: https://reviews.freebsd.org/D28225
This setting places a (small) limit on the size of the buffer cache,
constraining UFS performance on large servers. The setting comes from
the initial arm64 implementation and appears to be vestigal. Remove it.
Reviewed by: kib
Submitted by: Klara, Inc.
Sponsored by: Ampere Computing
Differential Revision: https://reviews.freebsd.org/D28162
Since r336439 we simply take the session pointer value mod the number of
worker threads (ncpu by default). On small systems this ends up
funneling all completion work through a single thread, which becomes a
bottleneck when processing IPSec traffic using hardware crypto drivers.
(Software drivers such as aesni(4) are unaffected since they invoke
completion handlers synchonously.)
Instead, maintain an incrementing counter with a unique value per
session, and use that to distribute work to completion threads.
Reviewed by: cem, jhb
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D28159
Store the driver softc below the fields owned by opencrypto. This is
a bit simpler and saves a pointer dereference when fetching the driver
softc when processing a request.
Get rid of the crypto session UMA zone. Session allocations are
frequent or performance-critical enough to warrant a dedicated zone.
No functional change intended.
Reviewed by: cem, jhb
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D28158
which is the same as GENERIC-MMCCAM but using a nodebug baseline.
Reviewed by: andrew, br (earlier version), jrtc27 (earlier version)
Differential revision: https://reviews.freebsd.org/D28091
Define a non-const static char EMSG[] = "" to avoid having to add
__DECONST() to all uses of EMSG. Also make current_dash a const char *
to fix this warning.
There are many casts of this struct to uint32_t, so we also need to ensure
that it is sufficiently aligned to safely perform this cast on architectures
that don't allow unaligned accesses. This fixes lots of -Wcast-align warnings.
Reviewed By: ae
Differential Revision: https://reviews.freebsd.org/D27879
This fixes -Wcast-align warnings caused by the underaligned `struct ip`.
This also silences them in the public functions by changing the function
signature from char * to void *. This is source and binary compatible and
avoids the -Wcast-align warning.
Reviewed By: ae, gbe (manpages)
Differential Revision: https://reviews.freebsd.org/D27882
Handle malloc failures in vbe_init().
If it should so happen and we do get malloc failure in vbe_init(),
use original mode list.
Replace nitems with nentries to have naming consistency and avoid
confusion with nitems() macro.
Reported by: yuripv, rpokala
This is similar to the logic used in ip_output() to convert mbufs
prior to computing checksums. Unmapped mbufs can be sent when using
sendfile() over IPsec or using KTLS over IPsec.
Reported by: Sony Arpita Das @ Chelsio QA
Reviewed by: np
Sponsored by: Chelsio
Differential Revision: https://reviews.freebsd.org/D28187
cpu_fork_kthread_handler() is always called after either cpu_fork() or
cpu_copy_thread(). The arm64 version was duplicating some of the work
already done by both of those functions.
Sponsored by: Netflix
The ports tree is scheduled to be converted from Subversion to Git
after the currently-scheduled 13.0-RELEASE, so the source of truth
will be Subversion for the ports tree.
Implement a hack specifically for this case.
Sponsored by: Rubicon Communications, LLC (netgate.com)
This patch is a quick hack to change the internal Ethertype used
within the chip. All frames with this type are dropped silently.
This patch allows you to overwrite the factory default 0x88a8, which
is used by IEEE 802.1ad VLAN stacking.
Reviewed by: kp, philip, brueffer
Approved by: kp (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24179
TRYUPGRADE requests kept failing when they should not have due to wrong
macro used to count readers.
Fixes: f6b091fbbd ("lockmgr: rewrite upgrade to stop always dropping the lock")
Noted by: asomers
Differential Revision: https://reviews.freebsd.org/D27947
- Don't oversize the buffer fragment. PAGE_SIZE - (curaddr & PAGE_MASK)
may be greater than the total length of the buffer.
- Don't use roundup2(len, alignment) to calculate the buffer fragment
size. The length of current bounced fragment is not subject to alignment
restriction, and next fragment should start at the page boundary.
Tested by: bz, s199p.wa1k9r@gmail.com
In order to reduce the pre-requisites of this file, implement the
pattern matching and creation of a temporary test directory without
use of grep respectively mktemp.
The new version makes it possible to provide a writable /tmp in any
case and independently of other local or remote file systems (except /
and /dev) being mounted.
The use of "dd if=/dev/random" has the same dependency on /dev/random
being operational as the previous version that used "mktemp". If this
is found to be an issue on platforms that do not have gathered
sufficient entropy at the time when this scriot is run, I suggest to
replace the "dd" command with "ps lauxww" to get a somewhat random
test directory name.
Approved by: rgrimes, glebius, cy
MFC after: 4 weeks
Differential Revision: https://reviews.freebsd.org/D28209
The ptrace(2) Linux man page claims the syscall returns ESRCH,
if the tracee is not stopped; the native ptrace(2) returns EBUSY.
Sponsored by: The FreeBSD Foundation
Previously the code would branch on top find out whether it should
branch on SDT probe and bumping the numposhits counter, depending
on cache_fplookup_cross_mount.
Arguably it should be done regardless of what said function returns.
Try to standardize how drivers negotiate feature and the
function names
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27930
- Add and fix a few error path counters
- Improve sysctl descriptions
- Use flags consistently to determine IPv4 vs IPv6
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27926
Prior to V1, the driver would enable interrupts and then notify the
host that DRIVER_OK. Since for V1, DRIVER_OK needs to be set before
notifying the virtqueues, there may be items in the queues waiting
to be processed by the time interrupts are enabled.
This fixes a bug where the Rx queue would appear stuck, only being
usable after an interface down/up cycle.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27922
For multiqueue, we may use fewer than the provided maximum number of
queues. Try to limit allocations of the unused queues: no interrupts,
no indirect descriptors, and no taskqueues.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27921
Verify the max_virtqueue_pairs is within the range allowed by
the spec.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27920
This useful when running on hosts that support checksum offloading
but not the GUEST_TSO (LRO) feature. Or potentially, some GRO-like
support when doing forwarding.
Only enable SW LRO when the host LRO is not available since both
tends to be harmful, and difficult to enable/disable selectively
with only a single IFCAP_LRO flag.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27919
This allows the Rx checksum and LRO to be modified without a full
reinit of the device.
Remove IFCAP_RXCSUM_IPV6 from the interface capabilities since in
VirtIO Rx checksums are just enabled or disabled for all protocols.
Properly update IFCAP_LRO if LRO is becomes disabled when Rx
checksums are disabled.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27916
In modern VirtIO, the virtqueues cannot be notified before setting
DRIVER_OK status.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27932
Defer the ether_ifattach until the interface capabilities
are configured
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27913
