- fix panic due to tqid overflow
- Improve libzfs_error_init messages
- Expose zfetch_max_idistance tunable
- Make dbufstat work on FreeBSD
- Fix EIO after resuming receive of new dataset over an existing one
bhyve sometimes segfaults when using an e1000 NIC with a Windows guest.
We are only updating our tdba and cached host mapping when the low address
register is written and when tx is set enabled, but not when the high address
or length registers are written. It is observed that Windows 10 is occasionally
enabling tx first then writing the registers in the order low, high, len. This
leaves us with a bogus base address and mapping, which causes a segfault later
when we try to copy from a descriptor that has unpredictable garbage in a
pointer.
Updating the address and mapping when any of those registers change seems to fix
that particular issue.
Reviewed by: mav, grehan (bhyve)
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D26798
This release contains some minor bugfixes; notably:
- 2x minor Makefile fixes (not used in base)
- Long brackets with a huge number of '=' overflow some internal buffer
arithmetic.
- Joining an upvalue with itself can cause a use-after-free crash.
See here for examples: http://www.lua.org/bugs.html#5.3.5
MFC after: 2 weeks
on some more advanced C features.
This fixes gcc-toolchain build of exception.S.
Reported and tested by: kevans
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Add support for ARC-1886, NVMe/SAS/SATA controller.
Many thanks to Areca for continuing to support FreeBSD.
Submitted by: 黃清隆 <ching2048 areca com tw>
MFC after: 2 weeks
These were missed in the previous pass. The extensions (partially)
supported by this change are:
- ARMv8.2-FHM, Floating-point multiplication variant
- ARMv8.4-LSE, Large System Extensions
- ARMv8.4-DIT, Data Independent Timing instructions
Reviewed by: andrew, markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26707
This brings these definitions in sync with the ARMv8.6 version of the
architecture reference manual.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26706
This release contains some minor bugfixes; notably:
- 2x minor Makefile fixes (not used in base)
- Long brackets with a huge number of '=' overflow some internal buffer
arithmetic.
- Joining an upvalue with itself can cause a use-after-free crash.
See here for examples: http://www.lua.org/bugs.html#5.3.5
This patch adds 80% of UINT32_MAX limit on sequence number.
When sequence number reaches limit kernel sends SADB_EXPIRE message to
IKE daemon which is responsible to perform rekeying.
Submitted by: Patryk Duda <pdk@semihalf.com>
Reviewed by: ae
Differential revision: https://reviews.freebsd.org/D22370
Obtained from: Semihalf
Sponsored by: Stormshield
Implement support for including IPsec ESN (Extended Sequence Number) to
both encrypt and authenticate mode (eg. AES-CBC and SHA256) and combined
mode (eg. AES-GCM). Both ESP and AH protocols are updated. Additionally
pass relevant information about ESN to crypto layer.
For the ETA mode the ESN is stored in separate crp_esn buffer because
the high-order 32 bits of the sequence number are appended after the
Next Header (RFC 4303).
For the AEAD modes the high-order 32 bits of the sequence number
[e.g. RFC 4106, Chapter 5 AAD Construction] are included as part of
crp_aad (SPI + ESN (32 high order bits) + Seq nr (32 low order bits)).
Submitted by: Grzegorz Jaszczyk <jaz@semihalf.com>
Patryk Duda <pdk@semihalf.com>
Reviewed by: jhb, gnn
Differential revision: https://reviews.freebsd.org/D22369
Obtained from: Semihalf
Sponsored by: Stormshield
As RFC 4304 describes there is anti-replay algorithm responsibility
to provide appropriate value of Extended Sequence Number.
This patch introduces anti-replay algorithm with ESN support based on
RFC 4304, however to avoid performance regressions window implementation
was based on RFC 6479, which was already implemented in FreeBSD.
To keep things clean and improve code readability, implementation of window
is kept in seperate functions.
Submitted by: Grzegorz Jaszczyk <jaz@semihalf.com>
Patryk Duda <pdk@semihalf.com>
Reviewed by: jhb
Differential revision: https://reviews.freebsd.org/D22367
Obtained from: Semihalf
Sponsored by: Stormshield
defaults, makes core files smaller, and fixes applications which use
pthread_join(3) in a wrong way, namely Steam.
This is based on a patch submitted by Jason Yang, which I've reworked
to set the limit instead of only changing the value reported (which
is enough to fix the bug for Linux pthreads, but could be confusing).
PR: 248225
Submitted by: Jason_YH_Yang at wistron.com (earlier version)
Analyzed by: Alex S <iwtcex@gmail.com>
Reviewed by: emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26778
This flag is going to be used by IKE daemon to signal if
Extended Sequence Number feature is going to be used.
Value for this flag was taken from OpenBSD source code
6b4cbaf181
Submitted by: Patryk Duda <pdk@semihalf.com>
Reviewed by: ae
Differential revision: https://reviews.freebsd.org/D22366
Obtained from: Semihalf
Sponsored by: Stormshield
This patch adds support for IPsec ESN (Extended Sequence Numbers) in
encrypt and authenticate mode (eg. AES-CBC and SHA256) and combined mode
(eg. AES-GCM).
For the encrypt and authenticate mode the ESN is stored in separate
crp_esn buffer because the high-order 32 bits of the sequence number are
appended after the Next Header (RFC 4303).
For the combined modes the high-order 32 bits of the sequence number
[e.g. RFC 4106, Chapter 5 AAD Construction] are part of crp_aad
(prepared by netipsec layer in case of ESN support enabled), therefore
non visible diff around combined modes.
Submitted by: Grzegorz Jaszczyk <jaz@semihalf.com>
Patryk Duda <pdk@semihalf.com>
Reviewed by: jhb
Differential revision: https://reviews.freebsd.org/D22365
Obtained from: Semihalf
Sponsored by: Stormshield
This patch adds support for IPsec ESN (Extended Sequence Numbers) in
encrypt and authenticate mode (eg. AES-CBC and SHA256) and combined mode
(eg. AES-GCM).
For encrypt and authenticate mode the ESN is stored in separate crp_esn
buffer because the high-order 32 bits of the sequence number are
appended after the Next Header (RFC 4303).
For combined modes the high-order 32 bits of the sequence number [e.g.
RFC 4106, Chapter 5 AAD Construction] are part of crp_aad (prepared by
netipsec layer in case of ESN support enabled), therefore non visible
diff around combined modes.
Submitted by: Grzegorz Jaszczyk <jaz@semihalf.com>
Patryk Duda <pdk@semihalf.com>
Reviewed by: jhb
Differential revision: https://reviews.freebsd.org/D22364
Obtained from: Semihalf
Sponsored by: Stormshield
This permits requests (netipsec ESP and AH protocol) to provide the
IPsec ESN (Extended Sequence Numbers) in a separate buffer.
As with separate output buffer and separate AAD buffer not all drivers
support this feature. Consumer must request use of this feature via new
session flag.
Submitted by: Grzegorz Jaszczyk <jaz@semihalf.com>
Patryk Duda <pdk@semihalf.com>
Reviewed by: jhb
Differential revision: https://reviews.freebsd.org/D24838
Obtained from: Semihalf
Sponsored by: Stormshield
The staleness reported in an error cause is in us, not ms.
Enforce limits on the life time via sysct; and socket options
consistently. Update the description of the sysctl variable to
use the right unit. Also do some minor cleanups.
This also fixes an interger overflow issue if the peer can
modify the cookie. This was reported by Felix Weinrank by fuzz testing
the userland stack and in
https://oss-fuzz.com/testcase-detail/4800394024452096
MFC after: 3 days
Hiding this feature behind RB_VERBOSE is gratuitous. The tunable is enough
to limit its use to only those who explicitly request it.
Suggested by: kevans
We convert a string like "W32:vendor/device" into "I:vendor;I:device",
where the output is longer than the input, but only allocate space equal
to the length of the input, leading to a buffer overflow.
Instead use open_memstream so we get a safe dynamically-grown buffer.
Found by: CHERI
Reviewed by: imp, jhb (mentor)
Approved by: imp, jhb (mentor)
Obtained from: CheriBSD
Differential Revision: https://reviews.freebsd.org/D26637
This simplifies the code while allowing for concurrent negative eviction
down the road.
Cache misses increased slightly due to higher rate of evictions allowed by
the change.
The current algorithm remains too aggressive.
It is reported to fix kernel panics when early unsolicited responses
delivered to the CODEC device not having driver attached yet.
PR: 250248
Reported by: Rajeev Pillai <rajeev_v_pillai@yahoo.com>
Reviewed by: avg
MFC after: 2 weeks
At some poing over the last week, the bootx64.efi file has grown
past the 800KB threshold, resulting in being unable to copy it to
the EFI/BOOT directory.
# stat -f %z efiboot.znWo7m
819200
# stat -f %z stand-test.PIEugN/EFI/BOOT/bootx64.efi
842752
The comment in the script that creates the ISOs suggests that 800KB
is the maximum allowed for the boot code, however I was able to
boot an ISO with a 1024KB boot partition. Additionally, I verified
against an ISO from OtherOS, where the boot EFI partition is 2.4MB.
Sponsored by: Rubicon Communications, LLC (netgate.com)
Only assign the address from the iovec to bio_data if it is a kernel
address. This was the single place where bio_data stored (however
briefly) a userspace pointer.
Reviewed by: imp, markj
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D26783
Our gcc-6.4 flags require non-empty function declarations.
Fix this to match the rest of the codebase.
Tested:
* compiled on gcc-6.4 for amd64
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D26795
This fixes a "suggested parens" compile warning-into-error
that shows up on gcc-6.4.
Reviewed by: ngie
Differential Revision: https://reviews.freebsd.org/D26789
VMware now has arm64 support; move these to MI files in advance of
building them on arm64.
PR: 250308
Reported by: Vincent Milum Jr
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
motherboard temperatures. In particular, the U4 northbridge die is very
hard to cool or heat effectively with fans and is not responsive to load.
It generally sits around 64C, where it seems happy, so (like Linux) just
declare that to be its target temperature.
This makes the PowerMac G5 much less loud, with no change in the
temperatures of any system components.
MFC after: 2 weeks
Offensive) the Linux Steam client likes to occasionally scan the game
process memory, presumably as part anti-cheat measures. Turns out
the client also expects each inode entry to be followed by a space
character, otherwise the parsing code crashes.
PR: 248216
Submitted by: Alex S <iwtcex@gmail.com>
MFC after: 2 weeks