If RSS is enabled, ixgbe(4) will query the RSS API for the types of hashes
which should be used. It'll then only enable hashes that are exposed via
the RSS layer.
This way it won't try to do things like enable UDP hashing if RSS explicitly
states that it isn't supported in lookups.
Tested:
* 82599EB ixgbe(4) NIC
A mix of fragmented and non-fragmented UDP in a single stream will end up
being hashed differently, resulting in out-of-order behaviour in the receive
path.
This was done in the linux e1000 driver in 2011.
Discussed with: jfv
by the stack.
Right now the stack isn't really setup for RSS with 4-tuple UDP hashing
for either IPv4 and IPv6.
The specifics:
* The UDP init path udp_init() and udplite_init() specify the hash as
2-tuple, so the PCBGROUPS code only tries a 2-tuple check;
* The PCBGROUPS and RSS code doesn't know about the UDP hash types
just yet, so they're never treated as valid hashes.
* For correctness, 4-tuple can't be enabled in the general case because
UDP datagrams can be more fragmented than IP datagrams may be.
Strictly speaking, TCP datagrams may also be fragmented and this could
cause issues with PCBGROUPS/RSS until the IP defragment path grows some
code to re-calculate the RSS hash.
I'll follow this commit up with awareness of the UDP 4-tuple for those
who wish to configure it, but for now it'll stay disabled.
No drivers (yet) know to use this function when RSS is enabled.
handling. For statically linked apps this uses the __exidx_start/end
symbols set up by the linker. For dynamically linked apps it finds the
shared object that contains the given address and returns the location and
size of the exidx section in that shared object.
The dl_unwind_find_exidx() name is used by other BSD projects and Android,
and is mentioned in clang 3.5 comments as "the BSD interface" for finding
exidx data. GCC (in libgcc_s) expects the exact same API and functionality
to be provided by a function named __gnu_Unwind_Find_exidx(), so we provide
that with an alias ("strong reference").
Reviewed by: kib@
MFC after: 1 week
A nested exception condition arises when a second exception is triggered while
delivering the first exception. Most nested exceptions can be handled serially
but some are converted into a double fault. If an exception is generated during
delivery of a double fault then the virtual machine shuts down as a result of
a triple fault.
vm_exit_intinfo() is used to record that a VM-exit happened while an event was
being delivered through the IDT. If an exception is triggered while handling
the VM-exit it will be treated like a nested exception.
vm_entry_intinfo() is used by processor-specific code to get the event to be
injected into the guest on the next VM-entry. This function is responsible for
deciding the disposition of nested exceptions.
calling mmap on /dev/mem and add a handler for the possible userland
machine checks that may result. Remove some pointless and wrong copy/paste
that has been in here for a decade as well.
This results in a /dev/mem with identical semantics to the x86 version.
MFC after: 1 week
read workload by splitting the single teardown rrw lock into
RRM_NUM_LOCKS (17) of them.
Read acquisitions are randomly distributed among these locks based
on curthread pointer. Write acquisitions are going to all the
locks, which for the usage of this type of lock should be rare.
Illumos issue:
5008 lock contention (rrw_exit) while running a read only load
MFC after: 2 weeks
When a sync task is waiting for a txg to complete, we should hurry it along
by increasing the number of outstanding async writes (i.e. make
vdev_queue_max_async_writes() return a larger number).
Illumos issue:
4753 increase number of outstanding async writes when sync task is waiting
MFC after: 2 weeks
Change the interaction between the DMU and ARC so that when the DMU is
shutting down an objset, we do not evict the data from the ARC. Instead
we simply coordinate the destruction of the DMU's data with the ARC.
The only case where we actually need to explicitly evict from the ARC is
when dbuf_rele_and_unlock() determines that the administrator has requested
that it not be kept in memory, via the primarycache/secondarycache properties.
In this case, we evict the data from the ARC by its blkptr_t, the same way
as when a block is freed we explicitly evict it from the ARC.
Illumos issue:
4631 zvol_get_stats triggering too many reads
MFC after: 2 weeks
Instead of asserting all zio's be properly aligned, only assert
on the logical ones.
Cap uberblocks at 8k, otherwise with ashift=17, there would be
only one uberblock.
This fixes a problem that zdb would trip assert on pools with
ashift >= 0xe (8k).
While there, also change the code so it only attempt to condense
space map unless the uncondensed size consumes greater than
zfs_metaslab_condense_block_threshold blocks.
Illumos issue:
4958 zdb trips assert on pools with ashift >= 0xe
MFC after: 2 weeks
Define the precision macros as bits sets to conform with XNU equivalent.
Test fflags passed for EVFILT_TIMER and return EINVAL in case an invalid flag
is passed.
Phabric: https://phabric.freebsd.org/D421
Reviewed by: kib
markedly better distribution of IPv6 address/ports than the previous key.
The previous key would hash large swaths of the port space for a given
source/destination IP address to the same low handful of bits, effectively
mapping them to the same queue. This made testing very .. special.
After I gave each iSCSI target its own port, the old limit appeared to be
not so big. This change almost proportionally increases per-LUN memory
use, but it is still three times better then it was before r268807.
MFC after: 2 weeks
CTL never had use for CA support code since SPI has gone, and there is no
even frontends supporting that. But it still was reserving 256 bytes of
memory per LUN per every possible initiator on every possible port.
Wrap unused code with ifdef's in case somebody even need it.
MFC after: 2 weeks
code. The consensus on arch@ is that this feature might have been useful
in the distant past, but is now just unnecessary bloat.
The int_rman_activate_resource() and int_rman_deactivate_resource()
functions become trivial, so manually inline them.
The special deferred handling of RF_ACTIVE is no longer needed in
reserve_resource_bound(), so eliminate the associated code at the
end of the function.
These changes reduce the object file size by more than 500 bytes on i386.
Update the rman.9 man page to reflect the removal of the RF_TIMESHARE
feature.
MFC after: 2 weeks
completely silenced. Make sure these warnings appear again, so there is
some incentive to fix them, but do not error out the whole kernel build
for them.
Noticed by: steven@pyro.eu.org
PR: 191867
MFC after: 3 days
systems without either a CSM or real graphics drivers, such as my Lenovo
Haswell laptop.
This provides working X with the small complication of a console cursor
permanently overlaid on the upper-left corner of the screen that will be
dealt with later.
Also remove some redundant screen clearing.
rather than only drivers attached later on. This involves a small amount of
code duplication with dev/fb/fbd.c, which will fixed later on.
Also improve performance of vt_blank() by making it not read from the
framebuffer unnecessarily.
This allows to clone VMs and move them between LUNs inside one storage
host without generating extra network traffic to the initiator and back,
and without being limited by network bandwidth.
LUNs participating in copy operation should have UNIQUE NAA or EUI IDs set.
For LUNs without these IDs VMWare will use traditional copy operations.
Beware: the above LUN IDs explicitly set to values non-unique from the VM
cluster point of view may cause data corruption if wrong LUN is addressed!
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
forcing filesystem VOP_LINK() methods to repeat the code. In
tmpfs_link(), remove redundand check for the type of the source,
already done by VFS.
Note that NFS server already performs this check before calling
VOP_LINK().
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
USB 2.0 port mask in addition to the USB 3.0 port mask. The hardware
does not always accept when writing -1U to the port switching
registers.
MFC after: 3 days
Tested by: Huang Wen Hui <huanghwh@gmail.com>
not done after the call to m_defrag(). This fixes a problem
where m_pullup() would prepend an mbuf to the list created
by m_defrag() making the chain greater than 32 again.
Tested by: rcarter@pinyon.org
Reviewed by: yongari, jfv
MFC after: 2 weeks
Improve extreme rewind import.
When doing an "extreme rewind" import ("zpool import -XF"), we attempt
to verify all data in the pool, essentially scrubbing the entire pool.
The problem is that spa_load_verify_cb() issues an unbounded number of
concurrent scrub i/os. This can lead to all of memory being used for
these zio's, wedging the system. Like normal scrub, we need to put a
cap on the number of outstanding i/os, and have the traverse thread
block when we reach this cap.
For this purpose the cap can be very large (10,000) to optimize the
elevator algorithm. Three kernel tunables have been added:
vfs.zfs.spa_load_verify_maxinflight
vfs.zfs.spa_load_verify_metadata
vfs.zfs.spa_load_verify_data
The latter two tunables controls whether metadata and/or user data
when doing extreme rewind.
Make 'zpool import -T' imply scrub.
Make zpool import -T <txg> accept hexadecimal values for the txg when
prefixed with 0x.
Skip txg's for which there is no uberblock when doing extreme rewind.
Skip reading all user data twice by skipping prefetches when doing
extreme rewinds as we do not access via the ARC.
Illumos issues:
4970 need controls on i/o issued by zpool import -XF
4971 zpool import -T should accept hex values
4972 zpool import -T implies extreme rewind, and thus a scrub
4973 spa_load_retry retries the same txg
4974 spa_load_verify() reads all data twice
MFC after: 2 weeks
- Move the code to calculate resident count into separate function.
It reduces the indent level and makes the operation of
vmmap_skip_res_cnt tunable more clear.
- Optimize the calculation of the resident page count for map entry.
Skip directly to the next lowest available index and page among the
whole shadow chain.
- Restore the use of pmap_incore(9), only to verify that current
mapping is indeed superpage.
- Note the issue with the invalid pages.
Suggested and reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
instruction emulation [1].
Fix bug in emulation of opcode 0x8A where the destination is a legacy high
byte register and the guest vcpu is in 32-bit mode. Prior to this change
instead of modifying %ah, %bh, %ch or %dh the emulation would end up
modifying %spl, %bpl, %sil or %dil instead.
Add support for moffsets by treating it as a 2, 4 or 8 byte immediate value
during instruction decoding.
Fix bug in verify_gla() where the linear address computed after decoding
the instruction was not being truncated to the effective address size [2].
Tested by: Leon Dang [1]
Reported by: Peter Grehan [2]
Sponsored by: Nahanni Systems
Previously, the "no execute" bit was being set directly in the PTE, instead
of the local variable in which the new PTE value is being constructed. So,
when the local variable was finally assigned to the PTE, the "no execute"
bit setting was lost.
firmware allows up to 48B to be read this way but the driver limits
itself to 8B at a time to remain compatible with old cxgbetool
binaries.
MFC after: 1 week
that it can connect to switches at speeds other than 1gb.
This requires changing the reference clock speed. Since we still don't
have a general clock API that lets a SoC-independant driver manipulate its
own clocks, this change includes a weak reference to a routine named
cgem_set_ref_clk(). The default implementation is a no-op; SoC-specific
code can provide an implementation that actually changes the speed.
Submitted by: Thomas Skibo <ThomasSkibo@sbcglobal.net>
to uncacheable. This leads to execrable console performance. Once PMAP is
up, remap the framebuffer as write-combining. This reduces boot time on my
laptop by 60% when booting with EFI.
MFC after: 2 weeks
- Suspend filesystem for unmount. This prevents new tmpfs nodes from
instantiating, and also ensures that only unmount thread can destroy
nodes.
- Do not start tmpfs node deletion until all vnodes are reclaimed,
which guarantees that no thread can access tmpfs data. For this,
call vflush() in the loop, until the mnt_nvnodelistsize is non-zero.
Note that after mnt_nvnodelistsize becomes 0, insmntque() blocks
insertion of a vnode germ into the mount list of vnodes.
- Fail node allocation when the filesystem is being unmounted. This
is race-free due to the vflush() call in loop. This is mostly
cosmetic, avoiding some more work which might be done until
suspension in unmount is started.
Note that there is currently no way to prevent new vnode instantiation
from readers during the unmount. Due to this, forced unmount might
live-lock if vflush() loop cannot get to the zero vnode count due to
races with readers. The unmount would proceed after the load is
lifted.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
vnode for the tmpfs node owning this object. The flag is currently
used for two purposes. First, it allows to correctly handle VV_TEXT
for tmpfs vnode when the ref count on the object is decremented to 1,
similar to vnode_pager_dealloc() for regular filesystems. Second, it
prevents some operations, which are done on OBJT_SWAP vm objects
backing user anonymous memory, but are incorrect for the object owned
by tmpfs node.
The second kind of use of the OBJ_TMPFS flag is incorrect, since the
vnode might be reclaimed, which clears the flag, but vm object
operations must still be disallowed.
Introduce one more flag, OBJ_TMPFS_NODE, which is permanently set on
the object for VREG tmpfs node, and used instead of OBJ_TMPFS to test
whether vm object collapse and similar actions should be disabled.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
unmount time) in the helper vfs_write_suspend_umnt(). Use it instead
of two inline copies in FFS.
Fix the bug in the FFS unmount, when suspension failed, the ufs
extattrs were not reinitialized.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
In particular, vnode must be exclusively locked when the tmpfs vnode
and object are divorced. When the vnode is opened, the object must be
still alive, since only live vnode can be opened, and the tmpfs node
owns a reference on the object.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
a vnode until it is verified that the vnode indeed belongs to tmpfs
mount. Otherwise, it might access random memory, at least in the
debug kernel.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
producer, instead of hard-coding VFS_VGET(). New function, which
takes callback, is called vn_get_ino_gen(), standard callback for
vn_get_ino() is provided.
Convert inline copies of vn_get_ino() in msdosfs and cd9660 into the
uses of vn_get_ino_gen().
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
the upstream implementation and helps ensure that a trap induced by tracing
fbt::trap:entry is handled without recursively generating another trap.
This makes it possible to run most (but not all) of the DTrace tests under
common/safety/ without triggering a kernel panic.
Submitted by: Anton Rang <anton.rang@isilon.com> (original version)
Phabric: D95
- Remove 4 extra bytes from the ethernet payload.
- The maximum RX buffer was incorrectly set. Increase it to 64K for
now, until the exact limit is understood.
- Enable hardware checksumming again.
- Make hardware data structure packed.
MFC after: 3 days
