tools would need to know about the counter_u64_t type. Allow to include
sys/counter.h from userspace.
- Utilize now defined type in kvm_counter_u64_fetch().
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
libkvm digging in kernel memory. This is possible since r231506 made
getifaddrs(3) to supply if_data for each ifaddr.
The pros of this change is that now netstat(1) doesn't know about kernel
struct ifnet and struct ifaddr. And these structs are about to change
significantly in head soon. New netstat binary will work well with 10.0
and any future kernel.
The cons is that now it isn't possible to obtain interface statistics
from a vmcore.
Functions intpr() and sidewaysintpr() were rewritten from scratch.
The output of netstat(1) has underwent the following changes:
1) The MTU is not printed for protocol addresses, since it has no notion.
Dash is printed instead. If there would be a strong desire to return
previous output, it is doable.
2) Output interface queue drops are not printed. Currently this data isn't
available to userland via any API. We plan to drop 'struct ifqueue' from
'struct ifnet' very soon, so old kvm(3) access to queue drops is soon
to be broken, too. The plan is that drivers would handle their queues
theirselves and a new field in if_data would be updated in case of drops.
3) In-kernel reference count for multicast addresses isn't printed. I doubt
that anyone used it. Anyway, netstat(1) is sysadmin tool, not kernel
debugger.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
images compiled on the world with higher major version number than the
high version number of the booted kernel. Default to disable.
Sponsored by: The FreeBSD Foundation
Discussed with: bapt
MFC after: 1 week
devfs_iosize_max_clamp sysctl, which allows/disables SSIZE_MAX-sized
i/o requests on the devfs files.
Sponsored by: The FreeBSD Foundation
Reminded by: Dmitry Sivachenko <trtrmitya@gmail.com>
MFC after: 1 week
* Add the MDIO clock probe during clock initialisation;
* Update the ethernet PLL configuration function to use the correct
values;
* Add a GMAC block configuration to pull the configuration out of hints;
* Add an ethernet switch reconfiguration method.
Tested:
* AR9344 SoC (DB120)
.. however, this has been tested with extra patches in my tree (to fix
the ethernet/MDIO support, SPI support, ethernet switch support)
and thus it isn't enough to bring the full board support up.
* Initialise the MDIO clock to default to the reference clock;
* Add some code to allow the hints mechanism to allow setup of the GMAC
config block.
* Document how the switch is wired up internally.
Tested:
* AR9331 SoC (Carambola 2)
* Print out the platform frequency the same as the other frequencies.
* Print out the MDIO frequency.
* Optionally do GMAC and ethernet switch setup if required.
Tested:
* AR9344
switch reset/initialise functions.
The AR934x and QC955x SoCs both have a configurable MDIO base clock.
The others have the MDIO clock use the same clock as the system
reference clock, whatever that may be.
Tested:
* AR9344 SoC
TODO:
* mips24k - AR933x would be fine for now, just to ensure that things
are sane.
control block.
The GMAC configuration block allows for some configuration of how
the GMAC0 (ie, arge0) port is connected to the on-board switch
(if indeed there is one.) It both can be pushed into the on-board
switch; it could also be torn out and exposed via an external
MII (and that operational mode is also controllable.)
Obtained from: Linux/OpenWRT
Most of the code between UFS1 and UFS2 is shared so this change
is pretty safe. Not only this makes UFS1 and 2 consistent but it
also matches what NetBSD and MacOS X have for some years now.
Reviewed by: mckusick
MFC after: 1 month
- Fix a bug that some $jail_{jname}_foo variables did not work.
- Fix a bug which prevented $jail_devfs_ruleset from working[1].
- Move $jail_parameters to the last of the configuraiton lines[1].
Reported by: Jase Thew[1]
Approved by: re (glebius)
Submitted by: Roger Pau Monné
Sponsored by: Citrix Systems R&D
Reviewed by: gibbs, grehan
Approved by: re (gjb)
sys/sys/systm.h:
* Add a new VM_GUEST type, VM_GUEST_HV (HyperV guest).
sys/dev/hyperv/vmbus/hv_vmbus_drv_freebsd.c:
sys/dev/hyperv/vmbus/hv_hv.c:
sys/dev/hyperv/stordisengage/hv_ata_pci_disengage.c:
* Set vm_guest to VM_GUEST_HV and use that on other HyperV related
devices instead of cloning the cpuid hypervisor check.
* Cleanup the vmbus_identify function.
prior releases.
Submitted by: Roger Pau Monné
Sponsored by: Citrix Systems R&D
Reviewed by: gibbs
Approved by: re (gjb)
sys/dev/xen/blkfront/blkfront.c:
On XenServer versions up to an including 6.2, paravirtualized
CDROM support is broken. When running in an HVM domain,
ignore paravirtualized instances of CDROM media, and instead
rely on native drivers attaching to emulated hardware. This
functions correctly on all currently known Xen based
platforms.
"dummy" switch priorities, and the users are left with no usable
/dev/random. The fix assigns priories to these and gives the users
what they want. The override tuneable has a stupid name (blame me!)
and this fixes it to be something that 'sysctl kern.random' emits
and is the right thing to set.
Approved by: re (gjb)
Approved by: secteam (cperciva)
to dummy,yarrow and break the usability of /dev/random.
Fix the name of the tunable to something logical that 'sysctl kern.random'
emits.
Submitted by: des@ (the idea, code by me)
annoying verbose boot error of the form
g_handleattr: vtbd0 bio_length 24 len 28 -> EFAULT
The ident returned by bhyve is a text string 'BHYVE-XXXX-XXXX', where
the X's are the first bytes of the md5 hash of the backing filename.
Reviewed by: neel
Approved by: re (gjb)
mount.devfs but mounts fdescfs. The mount happens just after
mount.devfs.
- rc.d/jail now displays whole error message from jail(8) when a jail
fails to start.
Approved by: re (gjb)
Refactor of /dev/random device. Main points include:
* Userland seeding is no longer used. This auto-seeds at boot time
on PC/Desktop setups; this may need some tweeking and intelligence
from those folks setting up embedded boxes, but the work is believed
to be minimal.
* An entropy cache is written to /entropy (even during installation)
and the kernel uses this at next boot.
* An entropy file written to /boot/entropy can be loaded by loader(8)
* Hardware sources such as rdrand are fed into Yarrow, and are no
longer available raw.
------------------------------------------------------------------------
r256240 | des | 2013-10-09 21:14:16 +0100 (Wed, 09 Oct 2013) | 4 lines
Add a RANDOM_RWFILE option and hide the entropy cache code behind it.
Rename YARROW_RNG and FORTUNA_RNG to RANDOM_YARROW and RANDOM_FORTUNA.
Add the RANDOM_* options to LINT.
------------------------------------------------------------------------
r256239 | des | 2013-10-09 21:12:59 +0100 (Wed, 09 Oct 2013) | 2 lines
Define RANDOM_PURE_RNDTEST for rndtest(4).
------------------------------------------------------------------------
r256204 | des | 2013-10-09 18:51:38 +0100 (Wed, 09 Oct 2013) | 2 lines
staticize struct random_hardware_source
------------------------------------------------------------------------
r256203 | markm | 2013-10-09 18:50:36 +0100 (Wed, 09 Oct 2013) | 2 lines
Wrap some policy-rich code in 'if NOTYET' until we can thresh out
what it really needs to do.
------------------------------------------------------------------------
r256184 | des | 2013-10-09 10:13:12 +0100 (Wed, 09 Oct 2013) | 2 lines
Re-add /dev/urandom for compatibility purposes.
------------------------------------------------------------------------
r256182 | des | 2013-10-09 10:11:14 +0100 (Wed, 09 Oct 2013) | 3 lines
Add missing include guards and move the existing ones out of the
implementation namespace.
------------------------------------------------------------------------
r256168 | markm | 2013-10-08 23:14:07 +0100 (Tue, 08 Oct 2013) | 10 lines
Fix some just-noticed problems:
o Allow this to work with "nodevice random" by fixing where the
MALLOC pool is defined.
o Fix the explicit reseed code. This was correct as submitted, but
in the project branch doesn't need to set the "seeded" bit as this
is done correctly in the "unblock" function.
o Remove some debug ifdeffing.
o Adjust comments.
------------------------------------------------------------------------
r256159 | markm | 2013-10-08 19:48:11 +0100 (Tue, 08 Oct 2013) | 6 lines
Time to eat crow for me.
I replaced the sx_* locks that Arthur used with regular mutexes;
this turned out the be the wrong thing to do as the locks need to
be sleepable. Revert this folly.
# Submitted by: Arthur Mesh <arthurmesh@gmail.com> (In original diff)
------------------------------------------------------------------------
r256138 | des | 2013-10-08 12:05:26 +0100 (Tue, 08 Oct 2013) | 10 lines
Add YARROW_RNG and FORTUNA_RNG to sys/conf/options.
Add a SYSINIT that forces a reseed during proc0 setup, which happens
fairly late in the boot process.
Add a RANDOM_DEBUG option which enables some debugging printf()s.
Add a new RANDOM_ATTACH entropy source which harvests entropy from the
get_cyclecount() delta across each call to a device attach method.
------------------------------------------------------------------------
r256135 | markm | 2013-10-08 07:54:52 +0100 (Tue, 08 Oct 2013) | 8 lines
Debugging. My attempt at EVENTHANDLER(multiuser) was a failure; use
EVENTHANDLER(mountroot) instead.
This means we can't count on /var being present, so something will
need to be done about harvesting /var/db/entropy/... .
Some policy now needs to be sorted out, and a pre-sync cache needs
to be written, but apart from that we are now ready to go.
Over to review.
------------------------------------------------------------------------
r256094 | markm | 2013-10-06 23:45:02 +0100 (Sun, 06 Oct 2013) | 8 lines
Snapshot.
Looking pretty good; this mostly works now. New code includes:
* Read cached entropy at startup, both from files and from loader(8)
preloaded entropy. Failures are soft, but announced. Untested.
* Use EVENTHANDLER to do above just before we go multiuser. Untested.
------------------------------------------------------------------------
r256088 | markm | 2013-10-06 14:01:42 +0100 (Sun, 06 Oct 2013) | 2 lines
Fix up the man page for random(4). This mainly removes no-longer-relevant
details about HW RNGs, reseeding explicitly and user-supplied
entropy.
------------------------------------------------------------------------
r256087 | markm | 2013-10-06 13:43:42 +0100 (Sun, 06 Oct 2013) | 6 lines
As userland writing to /dev/random is no more, remove the "better
than nothing" bootstrap mode.
Add SWI harvesting to the mix.
My box seeds Yarrow by itself in a few seconds! YMMV; more to follow.
------------------------------------------------------------------------
r256086 | markm | 2013-10-06 13:40:32 +0100 (Sun, 06 Oct 2013) | 11 lines
Debug run. This now works, except that the "live" sources haven't
been tested. With all sources turned on, this unlocks itself in
a couple of seconds! That is no my box, and there is no guarantee
that this will be the case everywhere.
* Cut debug prints.
* Use the same locks/mutexes all the way through.
* Be a tad more conservative about entropy estimates.
------------------------------------------------------------------------
r256084 | markm | 2013-10-06 13:35:29 +0100 (Sun, 06 Oct 2013) | 5 lines
Don't use the "real" assembler mnemonics; older compilers may not
understand them (like when building CURRENT on 9.x).
# Submitted by: Konstantin Belousov <kostikbel@gmail.com>
------------------------------------------------------------------------
r256081 | markm | 2013-10-06 10:55:28 +0100 (Sun, 06 Oct 2013) | 12 lines
SNAPSHOT.
Simplify the malloc pools; We only need one for this device.
Simplify the harvest queue.
Marginally improve the entropy pool hashing, making it a bit faster
in the process.
Connect up the hardware "live" source harvesting. This is simplistic
for now, and will need to be made rate-adaptive.
All of the above passes a compile test but needs to be debugged.
------------------------------------------------------------------------
r256042 | markm | 2013-10-04 07:55:06 +0100 (Fri, 04 Oct 2013) | 25 lines
Snapshot. This passes the build test, but has not yet been finished or debugged.
Contains:
* Refactor the hardware RNG CPU instruction sources to feed into
the software mixer. This is unfinished. The actual harvesting needs
to be sorted out. Modified by me (see below).
* Remove 'frac' parameter from random_harvest(). This was never
used and adds extra code for no good reason.
* Remove device write entropy harvesting. This provided a weak
attack vector, was not very good at bootstrapping the device. To
follow will be a replacement explicit reseed knob.
* Separate out all the RANDOM_PURE sources into separate harvest
entities. This adds some secuity in the case where more than one
is present.
* Review all the code and fix anything obviously messy or inconsistent.
Address som review concerns while I'm here, like rename the pseudo-rng
to 'dummy'.
# Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item)
------------------------------------------------------------------------
r255319 | markm | 2013-09-06 18:51:52 +0100 (Fri, 06 Sep 2013) | 4 lines
Yarrow wants entropy estimations to be conservative; the usual idea
is that if you are certain you have N bits of entropy, you declare
N/2.
------------------------------------------------------------------------
r255075 | markm | 2013-08-30 18:47:53 +0100 (Fri, 30 Aug 2013) | 4 lines
Remove short-lived idea; thread to harvest (eg) RDRAND enropy into the
usual harvest queues. It was a nifty idea, but too heavyweight.
# Submitted by: Arthur Mesh <arthurmesh@gmail.com>
------------------------------------------------------------------------
r255071 | markm | 2013-08-30 12:42:57 +0100 (Fri, 30 Aug 2013) | 4 lines
Separate out the Software RNG entropy harvesting queue and thread
into its own files.
# Submitted by: Arthur Mesh <arthurmesh@gmail.com>
------------------------------------------------------------------------
r254934 | markm | 2013-08-26 20:07:03 +0100 (Mon, 26 Aug 2013) | 2 lines
Remove the short-lived namei experiment.
------------------------------------------------------------------------
r254928 | markm | 2013-08-26 19:35:21 +0100 (Mon, 26 Aug 2013) | 2 lines
Snapshot; Do some running repairs on entropy harvesting. More needs
to follow.
------------------------------------------------------------------------
r254927 | markm | 2013-08-26 19:29:51 +0100 (Mon, 26 Aug 2013) | 15 lines
Snapshot of current work;
1) Clean up namespace; only use "Yarrow" where it is Yarrow-specific
or close enough to the Yarrow algorithm. For the rest use a neutral
name.
2) Tidy up headers; put private stuff in private places. More could
be done here.
3) Streamline the hashing/encryption; no need for a 256-bit counter;
128 bits will last for long enough.
There are bits of debug code lying around; these will be removed
at a later stage.
------------------------------------------------------------------------
r254784 | markm | 2013-08-24 14:54:56 +0100 (Sat, 24 Aug 2013) | 39 lines
1) example (partially humorous random_adaptor, that I call "EXAMPLE")
* It's not meant to be used in a real system, it's there to show how
the basics of how to create interfaces for random_adaptors. Perhaps
it should belong in a manual page
2) Move probe.c's functionality in to random_adaptors.c
* rename random_ident_hardware() to random_adaptor_choose()
3) Introduce a new way to choose (or select) random_adaptors via tunable
"rngs_want" It's a list of comma separated names of adaptors, ordered
by preferences. I.e.:
rngs_want="yarrow,rdrand"
Such setting would cause yarrow to be preferred to rdrand. If neither of
them are available (or registered), then system will default to
something reasonable (currently yarrow). If yarrow is not present, then
we fall back to the adaptor that's first on the list of registered
adaptors.
4) Introduce a way where RNGs can play a role of entropy source. This is
mostly useful for HW rngs.
The way I envision this is that every HW RNG will use this
functionality by default. Functionality to disable this is also present.
I have an example of how to use this in random_adaptor_example.c (see
modload event, and init function)
5) fix kern.random.adaptors from
kern.random.adaptors: yarrowpanicblock
to
kern.random.adaptors: yarrow,panic,block
6) add kern.random.active_adaptor to indicate currently selected
adaptor:
root@freebsd04:~ # sysctl kern.random.active_adaptor
kern.random.active_adaptor: yarrow
# Submitted by: Arthur Mesh <arthurmesh@gmail.com>
Submitted by: Dag-Erling Smørgrav <des@FreeBSD.org>, Arthur Mesh <arthurmesh@gmail.com>
Reviewed by: des@FreeBSD.org
Approved by: re (delphij)
Approved by: secteam (des,delphij)
