Commit Graph

316 Commits

Author SHA1 Message Date
Dag-Erling Smørgrav
58e21863da Clean up and reorder. 1999-09-08 19:17:15 +00:00
Nick Hibma
fe3cac87c1 1) s/mod(un)?load/kld$1load/
2) s/MODLOAD/KMODLOAD/ to be consistent with the rest of the variables
(KMOD, KMODOWN, KMODGRP, etc) and definition of MODLOAD/UNLOAD in the
Makefile of the ATAPI module

3) textual fixups
1999-09-06 20:11:59 +00:00
Bill Paul
e5a9fd5435 This commit adds driver support for PCI fast ethernet NICs based on
the Davicom DM9100 and DM9102 chipsets, including the Jaton Corporation
XPressNet. Datasheet is available from www.davicom8.com.

The DM910x chips are still more tulip clones. The API is reproduced
pretty faithfully, unfortunately the performance is pretty bad. The
transmitter seems to have a lot of problems DMAing multi-fragment
packets. The only way to make it work reliably is to coalesce transmitted
packets into a single contiguous buffer. The Linux driver (written by
Davicom) actually does something similar to this. I can't recomment this
NIC as anything more than a "connectivity solution."

This driver uses newbus and miibus and is supported on both i386
and alpha platforms.
1999-09-06 06:14:30 +00:00
Bill Paul
bbf7ca2249 Add a driver for the AMD AM79c873 10/100 PHY. By some strange coincidence,
this PHY and the Davicom DM9101 have exactly the same register definitions.
One of them is probably a clone of the other. I'm not sure which.

This is needed for the Davicom DM9102 10/100 PCI ethernet driver which
will be committed shortly.
1999-09-06 05:27:55 +00:00
Bill Paul
9555e59a1e This commit adds driver support for the Silicon Integrated Systems
SiS 900 and SiS 7016 PCI fast ethernet chipsets. Full manuals for the
SiS chips can be found at www.sis.com.tw.

This is a fairly simple chipset. The receiver uses a 128-bit multicast
hash table and single perfect entry for the station address. Transmit and
receive DMA and FIFO thresholds are easily tuneable. Documentation is
pretty decent and performance is not bad, even on my crufty 486. This
driver uses newbus and miibus and is supported on both the i386 and
alpha architectures.
1999-09-05 21:01:03 +00:00
David E. O'Brien
22167446c5 Install {ibcs2,svr4}.sh in /usr/sbin and not in /usr/bin.
related to PR:		13545
1999-09-05 05:19:08 +00:00
Bruce Evans
dd6898f64e Don't generate opt_debug_nullfs.h. It is no longer necessary.
Removed bogus definition of NULLFS
1999-09-04 12:40:07 +00:00
Bruce Evans
a5f3f7510a Backed out the quick fix in the previous commit. Depending on opt_ddb.h
was a mistake.  umapfs no longer depends on any options headers.
1999-09-04 12:01:32 +00:00
Marcel Moolenaar
48adcae922 Install linux.sh in /usr/sbin and not in /usr/bin.
PR: 13545
Submitted by: Jose M. Alcaide <jose@we.lc.ehu.es>
1999-09-03 07:15:38 +00:00
Mark Newton
c2de70091b Add MAINTAINER line 1999-09-01 00:32:18 +00:00
Bill Paul
59519ca74f Convert the RealTek 8139 driver to newbus and miibus in one swell foop.
Also set it up to be compiled as a module.
1999-08-31 14:45:51 +00:00
Bill Paul
a4f02d20ed Add a driver for the internal PHY in the RealTek 8139. 1999-08-31 14:43:30 +00:00
Roger Hardiman
ec4d750134 add vnode_if.h 1999-08-31 11:13:47 +00:00
Bill Paul
4ae17070a2 Convert the Adaptec and Winbond drivers to miibus. 1999-08-30 23:08:32 +00:00
Bruce Evans
de5104ae7c "Fixed" my recent world breakage (umap_subr.c now includes opt_ddb.h).
Fixed some style bugs, especially the bogus definition of UMAPFS.
1999-08-30 03:26:45 +00:00
Bill Paul
1ef8fbeabf Convert the 3Com XL driver to miibus. This one is a little tricky
due to the fact that there are non-MII cards supported by the same
driver and I don't have all of the cards available for testing. There's
also the 3c905B-COMBO which has MII, AUI and BNC media ports all in one
package. Supporting the COMBO is difficult because we have to add the
10base5 and 10base2 media types to the same ifmedia struct as the
MII-attached types, however there is no way to force the miibus and
child PHYs into existence before xl_attach() completes, so there is
no ifmedia struct available in xl_attach(). What we do inistead is
use the mediainit method as a callback: when a child PHY is attached,
it calls the miibus mediainit routine which selects a default media.
This routing also calls the NIC driver's mediainit method (if it
implements one) at which point we can safely add the other media
types.
1999-08-29 15:52:19 +00:00
Marcel Moolenaar
9e8b10d186 Add MAINTAINER and remove the unused COMPAT_LINUX and VM_STACK defines. 1999-08-28 09:04:21 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Bill Paul
b3bc7a4bb0 Fix path for miibus_if.m (mii > dev/mii); 1999-08-27 21:21:53 +00:00
Marcel Moolenaar
c6dfea0ebd Add sysctl variables for the Linuxulator. These reside under `compat.linux' as
discussed on current.

The following variables are defined (for now):

    osname (defaults to "Linux")
        Allow users to change the name of the OS as returned by uname(2),
        specially added for all those Linux Netscape users and statistics
        maniacs :-) We now have what we all wanted!

    osrelease (defaults to "2.2.5")
        Allow users to change the version of the OS as returned by uname(2).
        Since -current supports glibc2.1 now, change the default to 2.2.5
        (was 2.0.36).

    oss_version (defaults to 198144 [0x030600])
        This one will be used by the OSS_GETVERSION ioctl (PR 12917) which I
        can commit now that we have the MIB. The default version number is the
        lowest version possible with the current 'encoding'.

A note about imprisoned processes (see jail(2)):
  These variables are copy-on-write (as suggested by phk). This means that
  imprisoned processes will use the system wide value unless it is written/set
  by the process. From that moment on, a copy local to the prison will be
  used.

A note about the implementation:
  I choose to add a single pointer to struct prison, because I didn't like the
  idea of changing struct prison every time I come up with a new variable. As
  a side effect, the extra storage is only needed when a variable is set from
  within the prison. This also minimizes kernel bloat when the Linuxulator is
  not used; both compiled in or as a module.

Reviewed by: bde (first version only) and phk
1999-08-27 19:47:41 +00:00
Bill Paul
d0dca9afa4 Update these Makefiles; add mlphy and tlphy to the mii module, add
miibus_if.h to tl module's dependencies.
1999-08-27 19:45:19 +00:00
Greg Lehey
2de219e97f Change asf function to use the new name of the list in kern_linker.c.
See revision 1.35 of sys/kern/kern_linker.c.
1999-08-26 04:01:37 +00:00
Bill Paul
23e4757cd7 This commit adds device driver support for the Sundance Technologies ST201
PCI fast ethernet controller. Currently, the only card I know that uses
this chip is the D-Link DFE-550TX. (Don't ask me where to buy these: the
only cards I have are samples sent to me by D-Link.)

This driver is the first to make use of the miibus code once I'm sure
it all works together nicely, I'll start converting the other drivers.

The Sundance chip is a clone of the 3Com 3c90x Etherlink XL design
only with its own register layout. Support is provided for ifmedia,
hardware multicast filtering, bridging and promiscuous mode.
1999-08-21 18:34:58 +00:00
Bill Paul
d00275330d This commit adds support for the NetBSD MII abstraction layer and
MII-compliant PHY drivers. Many 10/100 ethernet NICs available today
either use an MII transceiver or have built-in transceivers that can
be programmed using an MII interface. It makes sense then to separate
this support out into common code instead of duplicating it in all
of the NIC drivers. The mii code also handles all of the media
detection, selection and reporting via the ifmedia interface.

This is basically the same code from NetBSD's /sys/dev/mii, except
it's been adapted to FreeBSD's bus architecture. The advantage to this
is that it automatically allows everything to be turned into a
loadable module. There are some common functions for use in drivers
once an miibus has been attached (mii_mediachg(), mii_pollstat(),
mii_tick()) as well as individual PHY drivers. There is also a
generic driver for all PHYs that aren't handled by a specific driver.
It's possible to do this because all 10/100 PHYs implement the same
general register set in addition to their vendor-specific register
sets, so for the most part you can use one driver for pretty much
any PHY. There are a couple of oddball exceptions though, hence
the need to have specific drivers.

There are two layers: the generic "miibus" layer and the PHY driver
layer. The drivers are child devices of "miibus" and the "miibus" is
a child of a given NIC driver. The "miibus" code and the PHY drivers
can actually be compiled and kldoaded as completely separate modules
or compiled together into one module. For the moment I'm using the
latter approach since the code is relatively small.

Currently there are only three PHY drivers here: the generic driver,
the built-in 3Com XL driver and the NS DP83840 driver. I'll be adding
others later as I convert various NIC drivers to use this code.

I realize that I'm cvs adding this stuff instead of importing it
onto a separate vendor branch, but in my opinion the import approach
doesn't really offer any significant advantage: I'm going to be
maintaining this stuff and writing my own PHY drivers one way or
the other.
1999-08-21 17:40:53 +00:00
Mike Pritchard
3eaf789e97 Sort xrefs.
Submitted by:	Alexey Zelkin <phantom@cris.net>
1999-08-19 00:10:37 +00:00
Greg Lehey
efabbb14f9 Bring up to date to work with -CURRENT. 1999-08-14 04:56:14 +00:00
Bill Paul
8674aa45c7 Convert the Winbond driver to newbus and have it compiled as a module. 1999-08-10 21:09:12 +00:00
Bill Paul
08339b4fa4 Convert the VIA Rhine driver to newbus and set it up to be compiled as
a module. Also modified the code to work on FreeBSD/alpha and added
device vr0 to the alpha GENERIC config.

While I was in the neighborhood, I noticed that I was still using
#define NFPX 1 in all of the Makefiles that I'd copied from the fxp
module. I don't really use #define Nfoo X so it didn't matter, but
I decided to customize this correctly anyway.
1999-08-10 17:15:20 +00:00
Greg Lehey
d50c8ea07f Add vinumraid5.c to list of sources. 1999-08-07 08:35:54 +00:00
Nik Clayton
bf9c09f910 "Linux emulator" -> "Linux image activator"
PR:             docs/12882
Submitted by:   des
1999-08-04 18:58:37 +00:00
Mark Newton
1cd528f787 Initial checkin 1999-07-30 12:50:48 +00:00
Mark Newton
60037843ce Clarify use of the 'streams' pseudo-device (i.e.: static or kld).
Trust me, this stuff will be in a real manpage before 4.0 ships :-)
1999-07-30 12:46:16 +00:00
Bill Paul
74432d0d13 Add a module Makefile for the PNIC driver. 1999-07-28 02:21:56 +00:00
Bill Paul
691c152864 This commit adds device driver support for Adaptec Duralink PCI fast
ethernet controllers based on the AIC-6915 "Starfire" controller chip.
There are single port, dual port and quad port cards, plus one 100baseFX
card. All are 64-bit PCI devices, except one single port model.

The Starfire would be a very nice chip were it not for the fact that
receive buffers have to be longword aligned. This requires buffer
copying in order to achieve proper payload alignment on the alpha.
Payload alignment is enforced on both the alpha and x86 platforms.
The Starfire has several different DMA descriptor formats and transfer
mechanisms. This driver uses frame descriptors for transmission which
can address up to 14 packet fragments, and a single fragment descriptor
for receive. It also uses the producer/consumer model and completion
queues for both transmit and receive. The transmit ring has 128
descriptors and the receive ring has 256.

This driver supports both FreeBSD/i386 and FreeBSD/alpha, and uses newbus
so that it can be compiled as a loadable kernel module. Support for BPF
and hardware multicast filtering is included.
1999-07-25 04:32:50 +00:00
Bill Paul
8b1b6ae5a6 Add mx and ax modules for the Macronix and ASIX drivers and update the
modules Makefile so they get built.
1999-07-24 20:55:05 +00:00
Bill Paul
98edb3e178 Create module directories for the xl, ti, tl and sk drivers and add
them to the Makefile so that modules will be generated for /modules.
1999-07-23 05:48:01 +00:00
Dag-Erling Smørgrav
6b5ca0d83e Rename bpfilter to bpf. 1999-07-06 19:23:32 +00:00
Dag-Erling Smørgrav
af5c746a49 Use the correct value for banksize so splash_pcx works in LFB modes. 1999-06-28 13:52:29 +00:00
Greg Lehey
9e0450400d Reenable Vinum build 1999-06-24 05:21:19 +00:00
Kazutaka YOKOTA
6e8394b8ba The second phase of syscons reorganization.
- Split syscons source code into manageable chunks and reorganize
  some of complicated functions.

- Many static variables are moved to the softc structure.

- Added a new key function, PREV.  When this key is pressed, the vty
  immediately before the current vty will become foreground.  Analogue
  to PREV, which is usually assigned to the PrntScrn key.
  PR: kern/10113
  Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de>

- Modified the kernel console input function sccngetc() so that it
  handles function keys properly.

- Reorganized the screen update routine.

- VT switching code is reorganized.  It now should be slightly more
  robust than before.

- Added the DEVICE_RESUME function so that syscons no longer hooks the
  APM resume event directly.

- New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING,
  SC_NO_HISTORY and SC_NO_SYSMOUSE.
  Various parts of syscons can be omitted so that the kernel size is
  reduced.

  SC_PIXEL_MODE
  Made the VESA 800x600 mode an option, rather than a standard part of
  syscons.

  SC_DISABLE_DDBKEY
  Disables the `debug' key combination.

  SC_ALT_MOUSE_IMAGE
  Inverse the character cell at the mouse cursor position in the text
  console, rather than drawing an arrow on the screen.
  Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG)

  SC_DFLT_FONT
  makeoptions "SC_DFLT_FONT=_font_name_"
  Include the named font as the default font of syscons.  16-line,
  14-line and 8-line font data will be compiled in.  This option replaces
  the existing STD8X16FONT option, which loads 16-line font data only.

- The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c.

- The video driver provides a set of ioctl commands to manipulate the
  frame buffer.

- New kernel configuration option: VGA_WIDTH90
  Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60.  These
  modes are mot always supported by the video card.
  PR: i386/7510
  Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx.

- The header file machine/console.h is reorganized; its contents is now
  split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h
  (another new file).  machine/console.h is still maintained for
  compatibility reasons.

- Kernel console selection/installation routines are fixed and
  slightly rebumped so that it should now be possible to switch between
  the interanl kernel console (sc or vt) and a remote kernel console
  (sio) again, as it was in 2.x, 3.0 and 3.1.

- Screen savers and splash screen decoders
  Because of the header file reorganization described above, screen
  savers and splash screen decoders are slightly modified.  After this
  update, /sys/modules/syscons/saver.h is no longer necessary and is
  removed.
1999-06-22 14:14:06 +00:00
Kazutaka YOKOTA
5c539f036d Print verbose messages when there is error.
Oked by: des
1999-06-16 14:04:45 +00:00
Roger Hardiman
05da1d9122 Add bktr (Bt848/Bt878 driver loadable module) to the Makefile i386 only section 1999-06-12 15:11:33 +00:00
Roger Hardiman
6c96acd35c Change perl5 to perl (same change as made in the fxp module) 1999-06-12 15:08:50 +00:00
Roger Hardiman
b72df81b21 Makefile to build a loadable bktr Bt848/Bt878 device driver
This allows the bt848 grabber to be loaded in the boot loader or
after bootup without the need for a custom kernel
1999-06-12 15:00:19 +00:00
John Birrell
c27d843bd9 Remove vinum from the build until Greg reviews phk's cdevsw changes.
Preferred by: phk (rather than committing the patch without review).
1999-06-02 07:15:17 +00:00
Jonathan Lemon
eb9d435ae7 Unifdef VM86.
Reviewed by:	silence on on -current
1999-06-01 18:20:36 +00:00
Greg Lehey
2ca1fa6cd1 Reenable vinum build. 1999-05-15 06:13:27 +00:00
Poul-Henning Kamp
2c7723a7c9 Vinum doesn't compile right now. 1999-05-13 09:43:29 +00:00
Dag-Erling Smørgrav
4a5222d798 MFS: indent-assisted style cleanup. 1999-05-10 15:25:50 +00:00
Dag-Erling Smørgrav
7782bb379d A little closer to style(9). 1999-05-08 11:51:51 +00:00