Commit Graph

1171 Commits

Author SHA1 Message Date
Bill Paul
85a94674d0 tdkphy.c is missing from this module's Makefile. Add it. 2003-07-10 05:12:10 +00:00
John Baldwin
6c525ee43c Add an ACPI to ISA psuedo bridge driver. It attaches an isab(4) device to
ACPI nodes with the plug and play ID's defined for a "Generic ISA Bus
Device" as defined in section 10.7 of the ACPI 2.0 specification.  This
gives machines like the Libretto that contain a fake ISA bus that is not
connected via a PCI-ISA bridge an ISA bus for ISA devices to attach to.

Tested by:	markm
2003-07-08 18:59:32 +00:00
John-Mark Gurney
e4bfcbdb32 add the mbr_enc file so that we can load the module on sparc64. 2003-07-05 08:11:43 +00:00
Sam Leffler
3d238d9e98 nitpicking
Submitted by:	Ruslan Ermilov <ru@FreeBSD.org>
2003-06-30 05:25:36 +00:00
Ruslan Ermilov
cf8603ce44 Attach the amd(4) module to the i386 and pc98 builds only;
untested on other platforms.

Not objected to by:	scottl
2003-06-28 08:01:27 +00:00
Sam Leffler
0ba9760820 switch to new 802.11 support 2003-06-28 06:19:01 +00:00
Sam Leffler
81e151e45f hookup ath and ath_hal to the build 2003-06-28 06:18:37 +00:00
Scott Long
c31c852372 Hook umct up to the module tree. 2003-06-28 05:46:16 +00:00
Scott Long
871f5c8c2d Add 'umct', a driver for MCT Corp. and Belkin F5U109 USB-Serial adapters.
This is based on the ubsa driver by Alexander Kabaev along with documentation
gleaned from the Linux mct_u232 driver.  I've had this driver sitting in my
tree for almost 6 months, and several others have found it useful.
2003-06-28 05:45:55 +00:00
Ruslan Ermilov
61340e72c4 Attach the "null" module to the LINT build.
Reviewed by:	markm
2003-06-26 08:06:31 +00:00
Sam Leffler
b52f49a9a0 module for atheros hal 2003-06-25 14:43:50 +00:00
Hartmut Brandt
cfca62bfac This is a netgraph node to access ATM interfaces. It works with the
hatm(4) and fatm(4) drivers, en(4) will follow soon.
2003-06-25 13:20:19 +00:00
Ian Dowse
7a07b896c5 The ext2fs module needs a machine-dependent bitops.h file, so only
build it on the i386 and alpha architectures, where this has been
set up (there is also a sparc64-bitops.h in sys/gnu/ext2fs, but it
appears to be broken and it is not linked up).

This should unbreak the sparc64 LINT build.
2003-06-24 13:35:46 +00:00
Ian Dowse
ce3ae5c7e3 Include the ufs module if ALL_MODULES is defined so that it gets
built by LINT. Also override a number of knobs for enabling and
disabling various modules in the ALL_MODULES case to further increase
LINT's module coverage.

Submitted by:	ru
2003-06-23 22:01:01 +00:00
Matthew N. Dodd
26a9ce3e36 Hook up scd(4) to the build.
Noticed by:	 ru
2003-06-23 20:52:03 +00:00
Ian Dowse
620d309e35 Add a few missing opt_ files to make this module compile again. 2003-06-23 19:41:00 +00:00
Sam Leffler
ae8afbf2dd module for Atheros 802.11 driver 2003-06-23 17:02:43 +00:00
Hartmut Brandt
fb24f088ae This is a driver for Fore PCA200E cards that uses busdma and works on
little endian and big endian and with 32 and 64 bit pointers. It already
has the hooks to be used for HARP, NATM and ngATM.
2003-06-23 14:46:12 +00:00
Poul-Henning Kamp
22db1e9ff5 Add "GEOM_FOX", a class which detects and selects between multiple
redundant paths to the same device.

This class reacts to a label in the first sector of the device,
which is created the following way:

        #    "0123456789abcdef012345..."
        #    "<----magic-----><-id-...>
        echo "GEOM::FOX       someid" | dd of=/dev/da0 conv=sync

NB: Since the fact that multiple disk devices are in fact the same
    device is not known to GEOM, the geom taste/spoil process cannot
    fully catch all corner cases and this module can therefore be
    confused if you do the right wrong things.

NB: The disk level drivers need to do the right thing for this to
    be useful, and that is not by definition currently the case.
2003-06-18 09:29:28 +00:00
Hartmut Brandt
c594298bee This is a driver for Fore/Marconi HE155 and HE622 ATM cards. It is full
busdma and has extensively been tested on i386 and sparc64.
2003-06-17 16:12:50 +00:00
Hartmut Brandt
57112b8d4a Repo-copy of sys/pci/if_en_pci.c to the rest of the midway driver (sys/dev/en)
so that all of the driver sources are in one place. Adjust the configuration
files and the module build.
2003-06-16 15:25:51 +00:00
Hartmut Brandt
7d361237dc Fix the breakage introduced by rev. 1.43 of sys/dev/midway.c (don't commit
on friday 13th and without making a universe). This adds struct and
constant definitions for ATM traffic parameters and re-enables the
build of the midway driver.

Tested by: make universe
2003-06-16 13:52:27 +00:00
Yoshihiro Takahashi
97caa42aea Include "../Makefile.inc" 2003-06-15 04:27:22 +00:00
Yoshihiro Takahashi
a252a7bf01 Most power management devices don't exist on pc98. 2003-06-15 04:24:28 +00:00
Warner Losh
e45d184c46 The en module has been broken for the last 40 hours. Disconnect it
from the tree until it is fixed.  Since it is an atm driver, it isn't
commonly used so this will not negatively impact too many people.
harti can reconnect it when he resurfaces and corrects the en module
problems.  This should allow snapshots to start succeeding again.

Reported by: lots of people
2003-06-15 04:15:29 +00:00
John-Mark Gurney
35ae09bc0e Fix the KMOD for the lpbb device. 2003-06-14 20:43:33 +00:00
Nicolas Souchu
e827419577 amdpm was omitted from the build of i2c controllers. Fixed. 2003-06-14 20:32:46 +00:00
Nicolas Souchu
49336098dd Add i2c to the list of modules to build. 2003-06-14 20:21:35 +00:00
Greg Lehey
887cae2b70 Remove these files. They have successors in tools/debugscripts. 2003-06-12 23:30:57 +00:00
Hartmut Brandt
591f4054cb This is a driver for the physical layer chips used in ATM interfaces.
It currently supports the PMC Sierra Lite, Ultra and 622 chips and
the IDT 77105. The driver handles media options and state in a consistent
manner for ATM drivers. The next commit to the midway driver will make
it use utopia.
2003-06-12 14:28:32 +00:00
Poul-Henning Kamp
87eca0f99c Add new geom_ccd module 2003-06-09 21:49:54 +00:00
Poul-Henning Kamp
68bf8b56da remove old CCD module 2003-06-09 21:48:12 +00:00
Gordon Tetlow
03d26d7e42 Add a geom_vol_ffs module and hook up to the build. 2003-06-03 20:32:13 +00:00
Dag-Erling Smørgrav
f834a1168c Add (but do not connect) a half-finished driver for Aureal Vortex cards.
The mixer works, pcm support is half done.
2003-06-01 11:58:46 +00:00
Poul-Henning Kamp
5d9bef6473 Add GEOM module compilation shims. 2003-05-31 18:36:41 +00:00
Yoshihiro Takahashi
3e4e484918 Move the ips driver from ${MACHINE_ARCH} == "i386" to ${MACHINE} == "i386".
Approved by:	re (scottl)
2003-05-13 11:26:08 +00:00
Scott Long
3bd9d6f570 Hook up the ips module 2003-05-11 06:40:09 +00:00
Scott Long
2aedd662d8 Add the 'ips' driver for the IBM (now Adaptec) ServeRAID controller
series.  This driver was generously developed and released by David
Jeffreys and Adaptec.  I've updated it to work with 5.x and fixed a
few bugs.

MFC After:	1 week
2003-05-11 06:36:49 +00:00
Julian Elischer
f2bb1cae36 Part one of undating the bluetooth code to the newest version
Submitted by:   Maksim Yevmenkin <m_evmenkin@yahoo.com>
Approved by: re@
2003-05-10 21:44:42 +00:00
Shunsuke Akiyama
11e04b0528 Add RealTek RTL8150 USB to fast Ethernet controller driver.
This driver now supports the Melco LUA-KTX and the GREEN HOUSE
GH-USB100B.

Reviewed by:	imp
MFC after:	2 weeks
2003-05-03 10:16:56 +00:00
Nate Lawson
51773ddf47 Support functions for the new ACPI import.
* AcpiOsDerivePciId(): finds a bus number, given the slot/func and the
    acpi parse tree.
  * AcpiOsPredefinedOverride(): use the sysctl hw.acpi.os_name to
    override the value for _OS.

Ideas from:	takawata, jhb
Reviewed by:	takawata, marcel
Tested on:	i386, ia64
2003-04-29 18:50:34 +00:00
Hartmut Brandt
33cfde03bc Convert the midway driver to use busdma. Except for this conversion the
following changes have been done:

- stylify. The original code was too hard to read.
- get rid of a number of compilation options (Adaptec-only, Eni-only, no-DMA).
- more debugging features.
- locking. This is not correct yet in the absence of interface layer locking,
  but is correct enough to not to cause lock order reversals.
- remove RAW mode. There are no users of this in the tree and I doubt that
  there are any.
- remove NetBSD compatibility code. There was no way to keep NetBSD non-busdma
  and FreeBSD busdma code together.
- if_en now buildable as a module.

This has been actively tested on sparc64 and i386 with ENI server and
client cards and an Adaptec card (thanks to kjc).

Reviewed by:	mdodd, arr
2003-04-25 16:14:03 +00:00
Bill Paul
87b4a25958 Add device driver support for the ASIX Electronics AX88172 USB 2.0
ethernet controller. The driver has been tested with the LinkSys
USB200M adapter. I know for a fact that there are other devices out
there with this chip but don't have all the USB vendor/device IDs.

Note: I'm not sure if this will force the driver to end up in the
install kernel image or not. Special magic needs to be done to exclude
it to keep the boot floppies from bloating again, someone please
advise.
2003-04-20 19:05:33 +00:00
Hidetoshi Shimokawa
77ee030b5f MFp4(simokawa_firewire):
Many internal structure changes for the FireWire driver.

- Compute CRC in CROM parsing.
- Add support for configuration ROM build.
- Simplify dummy buffer handling.
- busdma conversion
- Use swi_taskqueue_giant for -current.  Mark the interrupt routine as MPSAFE.
- AR buffer handling.
	Don't reallocate AR buffer but just recycle it.
	Don't malloc and copy per packet in fwohci_arcv().
	Pass packet to fw_rcv() using iovec.
	Application must prepare receiving buffer in advance.
- Change fw_bind API so that application should pre-allocate xfer structure.
- Add fw_xfer_unload() for recycling struct fw_xfer.
- Add post_busreset hook
- Remove unused 'sub' and 'act_type' in struct fw_xfer.
- Remove npacket from struct fw_bulkxfer.
- Don't call back handlers in fwochi_arcv() if the packet has
	not drained in AT queue
- Make firewire works on big endian platform.
- Use native endian for packet header and remove unnecessary ntohX/htonX.
- Remove FWXFERQ_PACKET mode.  We don't use it anymore.
- Remove unnecessary restriction of FWSTMAXCHUNK.
- Don't set root node for phy config packet if the root node is
	not cycle master capable but set myself for root node.
	We should be the root node after next bus reset.

	Spotted by: Yoshihiro Tabira <tabira@scd.mei.co.jp>
- Improve self id handling

Tested on: i386, sparc64 and i386 with forced bounce buffer
2003-04-17 03:38:03 +00:00
Bernd Walter
ca3acad1d7 add EHCI (USB 2.0) controller support.
Approved by:	joe
		gallatin (mentor)
Obtained from:  NetBSD
2003-04-14 14:04:08 +00:00
Max Khon
7d0de413cb Driver for Granch SBNI16 SHDSL modem
Submitted by:	Denis I. Timofeev <timofeev@granch.ru>
MFC after:	1 week
2003-04-13 06:27:13 +00:00
Yoshihiro Takahashi
ba32bfe24e The dpt, ex and idt modules are for i386 only. 2003-04-13 01:32:03 +00:00
Matthew N. Dodd
efc5f672bd - Add PCI support (Adaptec AHA-2920/A,Future Domain TMC-18XX/3260).
- Reduce duplicated code.

PR:             50427
Submitted by:   Bob Bishop <rb@gid.co.uk>
2003-04-07 10:13:25 +00:00
Matthew N. Dodd
e3a2085326 opt_geom.h is no longer required for this module. 2003-03-29 16:13:11 +00:00
Matthew N. Dodd
991aa7bf9a Add 'idt' driver to module build. 2003-03-29 15:56:13 +00:00