Commit Graph

2683 Commits

Author SHA1 Message Date
Attilio Rao
ed1f6dc235 Introduce the option VFS_ALLOW_NONMPSAFE and turn it on by default on
all the architectures.
The option allows to mount non-MPSAFE filesystem. Without it, the
kernel will refuse to mount a non-MPSAFE filesytem.

This patch is part of the effort of killing non-MPSAFE filesystems
from the tree.

No MFC is expected for this patch.

Tested by:	gianni
Reviewed by:	kib
2011-11-08 10:18:07 +00:00
Marius Strobl
a9ab459b31 Add a PCI front-end to esp(4) allowing it to support AMD Am53C974 and
replace amd(4) with the former in the amd64, i386 and pc98 GENERIC kernel
configuration files. Besides duplicating functionality, amd(4), which
previously also supported the AMD Am53C974, unlike esp(4) is no longer
maintained and has accumulated enough bit rot over time to always cause
a panic during boot as long as at least one target is attached to it
(see PR 124667).

PR:		124667
Obtained from:	NetBSD (based on)
MFC after:	3 days
2011-11-01 21:26:57 +00:00
Ken Smith
6168545a11 Adjust the debugger options slightly. This should help me do the right
thing when changing the debugging options as part of head becoming a new
stable branch.  It may also help people who for one reason or another want
to run head but don't want it slowed down by the debugging support.

Reviewed by:	kib
2011-10-27 13:07:49 +00:00
Yoshihiro Takahashi
09713cafdf MFi386: revision 225936
Add some improvements in the idle table callbacks:
  - Replace instances of manual assembly instruction "hlt" call
    with halt() function calling.
  - In cpu_idle_mwait() avoid races in check to sched_runnable() using
    the same pattern used in cpu_idle_hlt() with the 'hlt' instruction.
  - Add comments explaining the logic behind the pattern used in
    cpu_idle_hlt() and other idle callbacks.
2011-10-04 13:24:22 +00:00
Kip Macy
8451d0dd78 In order to maximize the re-usability of kernel code in user space this
patch modifies makesyscalls.sh to prefix all of the non-compatibility
calls (e.g. not linux_, freebsd32_) with sys_ and updates the kernel
entry points and all places in the code that use them. It also
fixes an additional name space collision between the kernel function
psignal and the libc function of the same name by renaming the kernel
psignal kern_psignal(). By introducing this change now we will ease future
MFCs that change syscalls.

Reviewed by:	rwatson
Approved by:	re (bz)
2011-09-16 13:58:51 +00:00
Christian Brueffer
b48f7c4c8d Fix a zyd(4) comment typo that was copy+pasted into most kernel config files.
PR:		160276
Submitted by:	MATSUMIYA Ryo <matsumiya@mma.club.uec.ac.jp>
Approved by:	re (kib)
MFC after:	1 week
2011-09-11 17:39:51 +00:00
Robert Watson
e5a0927394 Follow up to r225203 refining break-to-debugger run-time configuration
improvements:

(1) Implement new model in previously missed at91 UART driver
(2) Move BREAK_TO_DEBUGGER and ALT_BREAK_TO_DEBUGGER from opt_comconsole.h
    to opt_kdb.h (spotted by np)
(3) Garbage collect now-unused opt_comconsole.h

MFC after:	3 weeks
Approved by:	re (bz)
2011-08-27 14:24:27 +00:00
Robert Watson
4cf7545589 Attempt to make break-to-debugger and alternative break-to-debugger more
accessible:

(1) Always compile in support for breaking into the debugger if options
    KDB is present in the kernel.

(2) Disable both by default, but allow them to be enabled via tunables
    and sysctls debug.kdb.break_to_debugger and
    debug.kdb.alt_break_to_debugger.

(3) options BREAK_TO_DEBUGGER and options ALT_BREAK_TO_DEBUGGER continue
    to behave as before -- only now instead of compiling in
    break-to-debugger support, they change the default values of the
    above sysctls to enable those features by default.  Current kernel
    configurations should, therefore, continue to behave as expected.

(4) Migrate alternative break-to-debugger state machine logic out of
    individual device drivers into centralised KDB code.  This has a
    number of upsides, but also one downside: it's now tricky to release
    sio spin locks when entering the debugger, so we don't.  However,
    similar logic does not exist in other device drivers, including uart.

(5) dcons requires some special handling; unlike other console types, it
    allows overriding KDB's own debugger selection, so we need a new
    interface to KDB to allow that to work.

GENERIC kernels in -CURRENT will now support break-to-debugger as long as
appropriate boot/run-time options are set, which should improve the
debuggability of BETA kernels significantly.

MFC after:	3 weeks
Reviewed by:	kib, nwhitehorn
Approved by:	re (bz)
2011-08-26 21:46:36 +00:00
Bjoern A. Zeeb
61bc18a327 In HEAD when doing no further checkes there is no reason use the
temporary variable and check with if as TUNABLE_*_FETCH do not
alter values unless successfully found the tunable.

Reported by:	jhb, bde
MFC after:	3 days
X-MFC with:	r224516
Approved by:	re (kib)
2011-08-20 19:21:46 +00:00
Rick Macklem
88c037e26a Change all the sample kernel configurations to use
NFSCL, NFSD instead of NFSCLIENT, NFSSERVER since
NFSCL and NFSD are now the defaults. The client change is
needed for diskless configurations, so that the root
mount works for fstype nfs.
Reported by seanbru at yahoo-inc.com for i386/XEN.

Approved by:	re (hrs)
2011-08-07 20:16:46 +00:00
Bjoern A. Zeeb
0a5f264d60 Introduce a tunable to disable the time consuming parts of bootup
memtesting, which can easily save seconds to minutes of boot time.
The tunable name is kept general to allow reusing the code in
alternate frameworks.

Requested by:	many
Discussed on:	arch (a while a go)
Obtained from:	Sandvine Incorporated
Reviewed by:	sbruno
Approved by:	re (kib)
MFC after:	2 weeks
2011-07-30 13:33:05 +00:00
Ed Schouten
78d4d8eeb2 Restore binary compatibility for GIO_KEYMAP and PIO_KEYMAP.
Back in 2009 I changed the ABI of the GIO_KEYMAP and PIO_KEYMAP ioctls
to support wide characters. I created a patch to add ABI compatibility
for the old calls, but I didn't get any feedback to that.

It seems now people are upgrading from 8 to 9 they experience this
issue, so add it anyway.
2011-07-17 08:19:19 +00:00
John Baldwin
a9d1364238 Enable the new PCI-PCI bridge driver on pc98 by default. I missed this
in 221394 when I had meant to enable it on all i386 systems by default.
2011-07-16 14:07:44 +00:00
Yoshihiro Takahashi
e8e9012af6 - Reduce diffs against i386.
- Add snd_uaudio.
2011-06-13 13:24:33 +00:00
Andriy Gapon
234dab4a82 remove code for dynamic offlining/onlining of CPUs on x86
The code has definitely been broken for SCHED_ULE, which is a default
scheduler.  It may have been broken for SCHED_4BSD in more subtle ways,
e.g. with manually configured CPU affinities and for interrupt devilery
purposes.
We still provide a way to disable individual CPUs or all hyperthreading
"twin" CPUs before SMP startup.  See the UPDATING entry for details.

Interaction between building CPU topology and disabling CPUs still
remains fuzzy: topology is first built using all availble CPUs and then
the disabled CPUs should be "subtracted" from it.  That doesn't work
well if the resulting topology becomes non-uniform.

This work is done in cooperation with Attilio Rao who in addition to
reviewing also provided parts of code.

PR:		kern/145385
Discussed with:	gcooper, ambrisko, mdf, sbruno
Reviewed by:	attilio
Tested by:	pho, pluknet
X-MFC after:	never
2011-06-08 08:12:15 +00:00
Jung-uk Kim
b10c3d1c15 Move VT switching hack for suspend/resume from bus drivers to syscons.c
using event handlers.  A different version was

Submitted by:	Taku YAMAMOTO (taku at tackymt dot homeip dot net)
2011-05-09 18:46:49 +00:00
Rick Macklem
4309e17add This patch changes head so that the default NFS client is now the new
NFS client (which I guess is no longer experimental). The fstype "newnfs"
is now "nfs" and the regular/old NFS client is now fstype "oldnfs".
Although mounts via fstype "nfs" will usually work without userland
changes, an updated mount_nfs(8) binary is needed for kernels built with
"options NFSCL" but not "options NFSCLIENT". Updated mount_nfs(8) and
mount(8) binaries are needed to do mounts for fstype "oldnfs".
The GENERIC kernel configs have been changed to use options
NFSCL and NFSD (the new client and server) instead of NFSCLIENT and NFSSERVER.
For kernels being used on diskless NFS root systems, "options NFSCL"
must be in the kernel config.
Discussed on freebsd-fs@.
2011-04-27 17:51:51 +00:00
Alexander Motin
0d307e0905 - Add shim to simplify migration to the CAM-based ATA. For each new adaX
device in /dev/ create symbolic link with adY name, trying to mimic old ATA
numbering. Imitation is not complete, but should be enough in most cases to
mount file systems without touching /etc/fstab.
 - To know what behavior to mimic, restore ATA_STATIC_ID option in cases
where it was present before.
 - Add some more details to UPDATING.
2011-04-26 17:01:49 +00:00
Alexander Motin
97b53e3634 Switch the GENERIC kernels for all architectures to the new CAM-based ATA
stack. It means that all legacy ATA drivers are disabled and replaced by
respective CAM drivers. If you are using ATA device names in /etc/fstab or
other places, make sure to update them respectively (adX -> adaY,
acdX -> cdY, afdX -> daY, astX -> saY, where 'Y's are the sequential
numbers for each type in order of detection, unless configured otherwise
with tunables, see cam(4)).

ataraid(4) functionality is now supported by the RAID GEOM class.
To use it you can load geom_raid kernel module and use graid(8) tool
for management. Instead of /dev/arX device names, use /dev/raid/rX.
2011-04-24 08:58:58 +00:00
Jung-uk Kim
b9e4376214 Reinstate cpu_est_clockrate() support for P-state invariant TSC if APERF and
MPERF MSRs are available.  It was disabled in r216443.  Remove the earlier
hack to subtract 0.5% from the calibrated frequency as DELAY(9) is little
bit more reliable now.
2011-04-12 23:04:01 +00:00
Jung-uk Kim
3453537fa5 Use atomic load & store for TSC frequency. It may be overkill for amd64 but
safer for i386 because it can be easily over 4 GHz now.  More worse, it can
be easily changed by user with 'machdep.tsc_freq' tunable (directly) or
cpufreq(4) (indirectly).  Note it is intentionally not used in performance
critical paths to avoid performance regression (but we should, in theory).
Alternatively, we may add "virtual TSC" with lower frequency if maximum
frequency overflows 32 bits (and ignore possible incoherency as we do now).
2011-04-07 23:28:28 +00:00
Jung-uk Kim
d521c6b9c4 Implement atomic_load_acq_64(9) and atomic_store_rel_64(9) for i386. These
functions are implemented with CMPXCHG8B instruction where it is available,
i. e., all Pentium-class and later processors.  Note this instruction is
also used for atomic_store_rel_64() because a simple XCHG-like instruction
for 64-bit memory access does not exist, unfortunately.  If the processor
lacks the instruction, i. e., 80486-class CPUs, two 32-bit load/store are
performed with interrupt temporarily disabled, assuming it does not support
SMP.  Although this assumption may be little naive, it is true in reality.
This implementation is inspired by Linux.
2011-04-06 23:59:59 +00:00
Adrian Chadd
dba9c85977 Break out the ath PCI logic into a separate device/module.
Introduce the AHB glue for Atheros embedded systems. Right now it's
hard-coded for the AR9130 chip whose support isn't yet in this HAL;
it'll be added in a subsequent commit.

Kernel configuration files now need both 'ath' and 'ath_pci' devices; both
modules need to be loaded for the ath device to work.
2011-03-31 08:07:13 +00:00
Jung-uk Kim
38b8542ca9 Deprecate tsc_present as the last of its real consumers finally disappeared. 2011-03-15 17:19:52 +00:00
Jung-uk Kim
79422085d4 Add a tunable "machdep.disable_tsc" to turn off TSC. Specifically, it turns
off boot-time CPU frequency calibration, DELAY(9) with TSC, and using TSC as
a CPU ticker.  Note tsc_present does not change by this tunable.
2011-03-11 00:44:32 +00:00
Jung-uk Kim
bc34c87e81 Deprecate rarely used tsc_is_broken. Instead, we zero out tsc_freq because
it is almost always used with tsc_freq any way.
2011-03-10 20:02:58 +00:00
Julian Elischer
a8066a9d3b Add a small change to the comment in the GENRIC config files that include udbp
Submitted by:	Chris Forgron, cforgeron at acsi dot ca
MFC after:	1 week
2011-03-09 17:15:11 +00:00
Rebecca Cran
6bccea7c2b Fix typos - remove duplicate "the".
PR:	bin/154928
Submitted by:	Eitan Adler <lists at eitanadler.com>
MFC after: 	3 days
2011-02-21 09:01:34 +00:00
Yoshihiro Takahashi
377015fc6a MFi386: revision 218744
To avoid excessive code duplication create wrapper for fill regs
  from stack frame.
2011-02-19 10:36:05 +00:00
Matthew D Fleming
e7ceb1e99b Based on discussions on the svn-src mailing list, rework r218195:
- entirely eliminate some calls to uio_yeild() as being unnecessary,
   such as in a sysctl handler.

 - move should_yield() and maybe_yield() to kern_synch.c and move the
   prototypes from sys/uio.h to sys/proc.h

 - add a slightly more generic kern_yield() that can replace the
   functionality of uio_yield().

 - replace source uses of uio_yield() with the functional equivalent,
   or in some cases do not change the thread priority when switching.

 - fix a logic inversion bug in vlrureclaim(), pointed out by bde@.

 - instead of using the per-cpu last switched ticks, use a per thread
   variable for should_yield().  With PREEMPTION, the only reasonable
   use of this is to determine if a lock has been held a long time and
   relinquish it.  Without PREEMPTION, this is essentially the same as
   the per-cpu variable.
2011-02-08 00:16:36 +00:00
Yoshihiro Takahashi
89dc00d201 MFi386: revision 218329
Fix linking of the kernel without device npx.
2011-02-07 07:52:53 +00:00
Yoshihiro Takahashi
c2478adab5 MFi386: revision 218327
Clear the padding when returning context to the usermode, for
  MI ucontext_t and x86 MD parts.
  Kernel allocates the structures on the stack, and not clearing
  reserved fields and paddings causes leakage.
2011-02-07 07:51:31 +00:00
Yoshihiro Takahashi
31c16d56d2 MFi386: revision 217886
Set td_kstack_pages for thread0.
2011-02-07 07:39:09 +00:00
Sergey Kandaurov
4053b05b91 Make MSGBUF_SIZE kernel option a loader tunable kern.msgbufsize.
Submitted by:	perryh pluto.rain.com (previous version)
Reviewed by:	jhb
Approved by:	kib (mentor)
Tested by:	universe
2011-01-21 10:26:26 +00:00
Yoshihiro Takahashi
2e56cd38cb MFi386: revision 217515
The mem_range_softc is defined in mem.c.
2011-01-18 15:35:13 +00:00
Tijl Coosemans
d22e78d6b9 Copy powerpc/include/_inttypes.h to x86 and replace i386/amd64/pc98
headers with stubs.

Approved by:	kib (mentor)
2011-01-08 18:09:48 +00:00
Gavin Atkinson
467a917104 MFi386 r216012 by kib:
Calling fill_fpregs() for curthread is legitimate, and ELF coredump
does this.

Discussed with:	kib
MFC after:	3 days
2011-01-02 15:06:07 +00:00
Tijl Coosemans
81bd5041a2 Merge amd64 and i386 bus.h and move the resulting header to x86. Replace
the original amd64 and i386 headers with stubs.

Rename (AMD64|I386)_BUS_SPACE_* to X86_BUS_SPACE_* everywhere.

Reviewed by:	imp (previous version), jhb
Approved by:	kib (mentor)
2010-12-20 16:39:43 +00:00
Jung-uk Kim
71e0b05797 Do not subtract 0.5% from estimated frequency if DELAY(9) is driven by TSC.
Remove a confusing comment about converting to MHz as we never did.
2010-12-08 23:40:41 +00:00
Rebecca Cran
c90f7d9b44 Revert r216134. This checkin broke platforms where bus_space are macros:
they need to be a single statement, and do { } while (0) doesn't work in this
situation so revert until a solution can be devised.
2010-12-03 07:09:23 +00:00
Rebecca Cran
15b4888a24 Disallow passing in a count of zero bytes to the bus_space(9) functions.
Passing a count of zero on i386 and amd64 for [I386|AMD64]_BUS_SPACE_MEM
causes a crash/hang since the 'loop' instruction decrements the counter
before checking if it's zero.

PR:	kern/80980
Discussed with:	jhb
2010-12-02 22:19:30 +00:00
Konstantin Belousov
5c6eb03790 Remove npxgetregs(), npxsetregs(), fpugetregs() and fpusetregs()
functions, they are unused. Remove 'user' from npxgetuserregs()
etc. names.

For {npx,fpu}{get,set}regs(), always use pcb->pcb_user_save for FPU
context storage. This eliminates the need for ugly copying with
overwrite of the newly added and reserved fields in ucontext on i386
to satisfy alignment requirements for fpusave() and fpurstor().

pc98 version was copied from i386.

Suggested and reviewed by:	bde
Tested by:    pho (i386 and amd64)
MFC after:    1 week
2010-11-26 14:50:42 +00:00
Tijl Coosemans
d7e6be6924 Include x86/_align.h directly instead of including the i386 header.
Approved by:	kib (mentor)
2010-11-26 11:57:45 +00:00
Jung-uk Kim
19da400c64 Move identical copies of apm_bios.h to sys/x86/include, replace them with
stubs, and adjust PC98 stub accordingly.

Reviewed by:	imp, nyan
2010-11-11 19:36:21 +00:00
John Baldwin
961135ead8 - Remove <machine/mutex.h>. Most of the headers were empty, and the
contents of the ones that were not empty were stale and unused.
- Now that <machine/mutex.h> no longer exists, there is no need to allow it
  to override various helper macros in <sys/mutex.h>.
- Rename various helper macros for low-level operations on mutexes to live
  in the _mtx_* or __mtx_* namespaces.  While here, change the names to more
  closely match the real API functions they are backing.
- Drop support for including <sys/mutex.h> in assembly source files.

Suggested by:	bde (1, 2)
2010-11-09 20:46:41 +00:00
Attilio Rao
fcb250f392 Move the mptable.h under x86/include/.
Sponsored by:	Sandvine Incorporated
MFC after:	14 days
2010-11-09 20:28:09 +00:00
John Baldwin
0108cce0a4 Adjust the order of operations in spinlock_enter() and spinlock_exit() to
work properly with single-stepping in a kernel debugger.  Specifically,
these routines have always disabled interrupts before increasing the nesting
count and restored the prior state of interrupts after decreasing the nesting
count to avoid problems with a nested interrupt not disabling interrupts
when acquiring a spin lock.  However, trap interrupts for single-stepping
can still occur even when interrupts are disabled.  Now the saved state of
interrupts is not saved in the thread until after interrupts have been
disabled and the nesting count has been increased.  Similarly, the saved
state from the thread cannot be read once the nesting count has been
decreased to zero.  To fix this, use temporary variables to store interrupt
state and shuffle it between the thread's MD area and the appropriate
registers.

In cooperation with:	bde
MFC after:     1 month
2010-11-05 13:42:58 +00:00
John Baldwin
32c3d3b6e6 Move <machine/apicreg.h> to <x86/apicreg.h>. 2010-11-01 18:18:46 +00:00
John Baldwin
5ecdb3c46b Move the <machine/mca.h> header to <x86/mca.h>. 2010-11-01 17:40:35 +00:00
Yoshihiro Takahashi
f8a94ecc2c Rename BUS_SPACE_IO and BUS_SPACE_MEM defines to BUS_SPACE_TAG_IO and
BUS_SPACE_TAG_MEM respectively to avoid conflict with nexus.c.
2010-10-31 03:03:20 +00:00