with to == NULL for SYN segments. So don't assume tp != NULL.
Thanks to jhb@ for reporting and suggesting a fix.
PR: 250499
MFC after: 1 week
XMFC-with: r367530
Sponsored by: Netflix, Inc.
We never set PFRULE_RULESRCTRACK when calling pf_insert_src_node(). We do set
PFRULE_SRCTRACK, so update the assertion to match.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27254
There are message based controllers that can bind interrupts even if they are
not implemented as root controllers (such as the ITS subblock of GIC).
MFC after: 3 weeks
o allow env var MAKE_OBJDIR_CHECK_WRITABLE=no to skip writable
checks in InitObjdir. Explicit .OBJDIR target always allows
read-only directory.
o More code cleanup and refactoring.
o More unit tests
MFC after: 1 week
o allow env var MAKE_OBJDIR_CHECK_WRITABLE=no to skip writable
checks in InitObjdir. Explicit .OBJDIR target always allows
read-only directory.
o Fix building and unit-tests on non-BSD.
o More code cleanup and refactoring.
o More unit tests
This removes 288KB (36%) of the driver code and zillions of hacks and
workarounds, making single driver uniformly support several different
generations of hardware interfaces, not counting minor card variations.
After years of the hopeless fight, I don't think it worth to continue
support for hardware obsolete for 15-20 years. Instead much cleaner
now code should allow to move forward toward better locking, multiple
queues and other cool features.
All the remaining Qlogic cards starting from 4Gb 24xx to 32Gb 27xx use
the same hardware/firmware interface with minor incremental improvements,
so it seems to be a good new starting point. Except one PCI-X model all
all of them are PCIe and so still usable in modern systems.
Discussed with: ken, scottl, jpaetzel, imp
Relnotes: yes
Rudimentary AUX multiplexing support was added to kernel to make possible
touchpad initialization on some HP EliteBook laptops with trackpoint.
Disable multiplexer probing on all Lenovo laptops now as they use touchpad
pass-through port rather than AUX multiplexer to connect trackpoint and
at least two model (X120e and X121e) is known for getting PS/2 AUX port
dysfunctional after switching back to hidden multiplexing mode.
AUX MUX probing can be reenabled with setting of hw.psm.mux_disabled loader
tunable to 0.
PR: 249987
Reported by: jwb
MFC after: 2 weeks
All reads and writes are serialized with a hand-rolled lock, but unlocking it
always wakes up all waiters. Existing flag fields get resized to make room for
introduction of waiter counter without growing the struct.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D27273
* Add examples covering -f, -m and -p flags.
While here, extend the initial description paragraph to note that fstat(1)
will report on all opened files, belonging to processes the user has access to.
The current paragraph may lead to understand that you can get information on
opened files from processes belonging to other users.
Reviewed by: bjk@, danfe@, gbe@
Approved by: manpages (gbe@)
Differential Revision: https://reviews.freebsd.org/D26949
* Add more EXAMPLES covering flags: -A, -B, -c, -f, -i, -H, -l, -q, -R, -w
* While here, change existing wording to use the imperative (remove "To
find")
* Reword first example to be consistent with how grep(1) understand
words (-w)
Approved by: manpages (bcr@)
Differential Revision: https://reviews.freebsd.org/D27264
Suppose a running callout re-arms itself, and before the callout
finishes running another CPU calls callout_drain() and goes to sleep.
softclock_call_cc() will wake up the draining thread, which may not run
immediately if there is a lot of CPU load. Furthermore, the callout is
still in the callout wheel so it can continue to run and re-arm itself.
Then, suppose that the callout migrates to another CPU before the
draining thread gets a chance to run. The draining thread is in this
loop in _callout_stop_safe():
while (cc_exec_curr(cc) == c) {
CC_UNLOCK(cc);
sleep();
CC_LOCK(cc);
}
but after the migration, cc points to the wrong CPU's callout state.
Then the draining thread goes off and removes the callout from the
wheel, but does so using the wrong lock and per-CPU callout state.
Fix the problem by doing a re-lookup of the callout CPU after sleeping.
Reported by: syzbot+79569cd4d76636b2cc1c@syzkaller.appspotmail.com
Reported by: syzbot+1b27e0237aa22d8adffa@syzkaller.appspotmail.com
Reported by: syzbot+e21aa5b85a9aff90ef3e@syzkaller.appspotmail.com
Reviewed by: emaste, hselasky
Tested by: pho
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27266
There are many cases where one would choose avoid entering the debugger
on a normal panic, opting instead to reboot and possibly save a kernel
dump. However, recursive kernel panics are an unusual case that might
warrant attention from a human, so provide a secondary tunable,
debug.debugger_on_recursive_panic, to allow entering the debugger only
when this occurs.
For for simplicity in maintaining existing behaviour, the tunable
defaults to zero.
Reviewed by: cem, markj
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D27271
First stab at documenting the different disk ioctl commands defined in
sys/disk.h.
Reviewed by: phk (prior version)
Differential Revision: https://reviews.freebsd.org/D26994
Section 7 of the manual pages contain lots of very useful information, but
finding the pages is not always obvious - to assist people in finding the
information, add missing cross-references.
Reviewed by: 0mp (mentor), mhorne, yuripv
Approved by: 0mp (mentor
Differential Revision: https://reviews.freebsd.org/D27284
Allwinner bootrom have an alternate location for u-boot at 128k.
Work was made recently in u-boot to relocate correctly if loaded from
there.
The advantage of this offset is that we can now use a GPT scheme.
The current global list is a significant problem, in particular induces a lot
of cross-domain thread frees. When running poudriere on a 2 domain box about
half of all frees were of that nature.
Patch below introduces per-domain thread data containing zombie lists and
domain-aware reaping. By default it only reaps from the current domain, only
reaping from others if there is free TID shortage.
A dedicated callout is introduced to reap lingering threads if there happens
to be no activity.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D27185
When there is no ACPI redistributor sub-table in the MADT we need to
fall back to use the GICR base address from the GIC CPU interface
structure.
Handle this fallback when adding memory to the device and when counting
the number of redistributors.
PR: 251171
Reported by: Andrey Fesenko <f0andrey_gmail.com>
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D27247
Add update to RIP after a userspace instruction decode (as is done for
the in-kernel counterpart of this case).
Submitted by: adam_fenn.io
Reviewed by: cem, markj
Approved by: grehan (bhyve)
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D27243
pipes get stated all thet time and this avoidably contributed to contention.
The pipe lock is only held to accomodate MAC and to check the type.
Since normally there is no probe for pipe stat depessimize this by having the
flag.
The pipe_state field gets modified with locks held all the time and it's not
feasible to convert them to use atomic store. Move the type flag away to a
separate variable as a simple cleanup and to provide stable field to read.
Use short for both fields to avoid growing the struct.
While here short-circuit MAC for pipe_poll as well.
It can useful for code outside the VM system to look up the NUMA domain
of a page backing a virtual or physical address, specifically when
creating NUMA-aware data structures. We have _vm_phys_domain() for
this, but the leading underscore implies that it's an internal function,
and vm_phys.h has dependencies on a number of other headers.
Rename vm_phys_domain() to vm_page_domain(), and _vm_phys_domain() to
vm_phys_domain(). Make the latter an inline function.
Add _vm_phys.h and define struct vm_phys_seg there so that it's easier
to use in other headers. Include it from vm_page.h so that
vm_page_domain() can be defined there.
Include machine/vmparam.h from _vm_phys.h since it depends directly on
some constants defined there.
Reviewed by: alc
Reviewed by: dougm, kib (earlier versions)
Differential Revision: https://reviews.freebsd.org/D27207
