GEOM_PART does not exist in the kernel, and 2) the GEOM in
question does not exist.
Additionally abort in case of programming errors that result
in neither the class nor geom not being present in the gctl
request.
Submitted by: "Andrey V. Elsukov" <bu7cher@yandex.ru>
Approved by: re (kib)
cosmetic change to reduce cruft in the proc table.
Also change the idle wait message to `-` like how taskqueues are.
Reviewed by: julian
Approved by: re (kib)
device in non-interactive mode.
If there are no USB devices, sysinstall gives an error messages, and if there
is >1, it'll ask which one is to be used. This change allows a non-interactive
install from USB media to succeed without any user interaction if there is
exactly one USB disk device in the system it can use.
Submitted by: Daniel O'Connor < doconnorat gsoft dot com dot au >
Reviewed by: randi
Approved by: re (rwatson)
the kern.polling.enable sysctl, remove the sysctl. It has been deprecated
since FreeBSD 6 in favour of per-ifnet polling flags.
Reviewed by: luigi
Approved by: re (kib)
association setup.
* Fix a bug where message with illegal stream ids are not deleted.
* Fix a crash when reporting back unsent messages from the send_queue.
* Fix a bug related to INIT retransmission when the socket is already
closed.
* Fix a bug where associations were stalled when partial delivery API
was enabled.
* Fix a bug where the receive buffer size was smaller than the
partial_delivery_point.
Approved by: re, rrs (mentor)
MFC after: One day.
The columns for tty input and output may bump against each other
if the tty output needs more than 5 columns. Add a bit of space
that pushes everything 1 column to the right, but also avoids the
problem.
Approved by: re (rwatson)
will initialize the FIFO memory correctly on attach. Before
that this values was intialized in only in at91_usart_bus_attach
which is called after the uart(4) memory allocation happens.
Approved by: re (kib)
MFC after: 1 week
by introducing the new CONVERT_BLOCKS macro which operates on
sizes already converted to number of blocks. With this macro
it is not longer needed to perform needless multiplication by
blocksize just to divide on it later in CONVERT macro.
Approved by: re (kib)
MFC after: 1 week
mismatch between the cached entry and the intended destination. The
cached rtentry{} is flushed but the associated llentry{} is not. This
causes the wrong destination MAC address being used in the output
packets. The fix is to flush the llentry{} when rtentry{} is cleared.
Reviewed by: kmacy, rwatson
Approved by: re
Check that the given variable is at most uintptr_t in size and that
it is aligned.
Note: ASSERT_ATOMIC_LOAD() uses ALIGN() to check for adequate
alignment -- however, the function of ALIGN() is to guarantee
alignment, and therefore may lead to stronger alignment
enforcement than necessary for types that are smaller than
sizeof(uintptr_t).
Add checks to mtx, rw and sx locks init functions to detect possible
breakage. This was used during debugging of the problem fixed with
r196118 where a pointer was on an un-aligned address in the dpcpu area.
In collaboration with: rwatson
Reviewed by: rwatson
Approved by: re (kib)
- Provide lapic_disable_pmc(), lapic_enable_pmc(), and lapic_reenable_pmc()
routines in the local APIC code that the hwpmc(4) driver can use to
manage the local APIC PMC interrupt vector.
- Do not enable the local APIC PMC interrupt vector by default when
HWPMC_HOOKS is enabled. Instead, the hwpmc(4) driver explicitly
enables the interrupt when it is succesfully initialized and disables
the interrupt when it is unloaded. This avoids enabling the interrupt
on unsupported CPUs which may result in spurious NMIs.
Reported by: rnoland
Reviewed by: jkoshy
Approved by: re (kib)
MFC after: 2 weeks
checkout. If SVNROOT is specified, then the source tree will be checked
out from that SVN repository instead of using CVS. ports and docs still
use CVS. If SVNROOT is not specified, then the source tree will be checked
out using CVS. An explicit SVN branch can be specified using SVNBRANCH
(e.g. SVNBRANCH=stable/8). If SVNBRANCH is not set but RELEASETAG is set
to a CVS branch (such as RELENG_8) the appropriate SVN branch will be
inferred from the CVS branch using svnbranch.awk.
Note that there are still several open questions about using SVN instead
of CVS in the release process. However, this does enable one to build a
release from an SVN repository if needed.
Approved by: re (kensmith)
"SATA disk device" reflects the current state of /dev/ada*; this may be
changed in the future if other drive types start appearing as /dev/ada*.
Submitted by: randi
Details about what disks can appear as /dev/ada* supplied by: scottl
Approved by: re (rwatson)
Drive and controller status can be reported, basic attributes changed,
and arrays and spares can be created and deleted.
Approved by: re
Obtained from: Yahoo! Inc.
truncate(2) call, or by being removed or truncated on open, either
new softupdate freeblks structure is allocated to track the freed
blocks of the node, or truncation is done syncronously when too many SU
dependencies are accumulated. The decision does not take into account
the allocated freeblks dependencies, allowing workloads that do huge
amount of truncations to exhaust the kernel memory.
Take the number of allocated freeblks into consideration for
softdep_slowdown().
Reported by: pluknet gmail com
Diagnosed and tested by: pho
Approved by: re (rwatson)
MFC after: 1 month
pathes, as far as I see and testing seems to confirm it. Comparision of
old_lock with LK_SHARED make sense only if vnode is locked by current
thread.
When downgrading, pass LK_RETRY to the vn_lock(), since otherwise
vn_lock() unlocks the doomed vnode, causing extra unlock.
Reported and tested by: pho
Approved by: re (rwatson)
MFC after: 3 weeks
Receiving any ip packet for which there is no existing socket will
crash if ipfw has a uid or gid test rule, as the uid/gid
of the non existent owner of said non existent socket is tested.
Brooks introduced this error as part of his >16 gids patch.
It appears to be a cut-n-paste error from similar code a few lines
before. The old code used the 'pcb' variable here, but in the
new code that switched the 'inp' variable, which is often NULL
and what is tested in the code further up. The rest of the multi-gid
patch for ipfw seems solid (and cleaner than previous code).
Reviewed by: brooks
Approved by: re (rwatson)
controllers. Controller, array, and drive status can be checked, basic
attributes can be changed, and arrays and spares can be created and deleted.
Controller firmware can also be flashed.
This does not replace MegaCLI, found in ports, as that is officially sanctioned
and supported by LSI and includes vastly more functionality. However, mfiutil
is open source and guaranteed to provide basic functionality, which can be
especially useful if you have a problem and can't get MegaCLI to work.
Approved by: re
Obtained from: Yahoo! Inc.
has proven to have a good effect when entering KDB by using a NMI,
but it completely violates all the good rules about interrupts
disabled while holding a spinlock in other occasions. This can be the
cause of deadlocks on events where a normal IPI_STOP is expected.
* Adds an new IPI called IPI_STOP_HARD on all the supported architectures.
This IPI is responsible for sending a stop message among CPUs using a
privileged channel when disponible. In other cases it just does match a
normal IPI_STOP.
Right now the IPI_STOP_HARD functionality uses a NMI on ia32 and amd64
architectures, while on the other has a normal IPI_STOP effect. It is
responsibility of maintainers to eventually implement an hard stop
when necessary and possible.
* Use the new IPI facility in order to implement a new userend SMP kernel
function called stop_cpus_hard(). That is specular to stop_cpu() but
it does use the privileged channel for the stopping facility.
* Let KDB use the newly introduced function stop_cpus_hard() and leave
stop_cpus() for all the other cases
* Disable interrupts on CPU0 when starting the process of APs suspension.
* Style cleanup and comments adding
This patch should fix the reboot/shutdown deadlocks many users are
constantly reporting on mailing lists.
Please don't forget to update your config file with the STOP_NMI
option removal
Reviewed by: jhb
Tested by: pho, bz, rink
Approved by: re (kib)
value the kernel calculated directly as we already read it
with struct vnet. This will make kvm_vnet.c more resilent
in case of possible kernel changes.
Reviewed by: rwatson
Approved by: re (kib)
with their own virtual network stack. Jails only inheriting a
network stack cannot change anything that cannot be changed from
within a prison.
Reviewed by: rwatson, zec
Approved by: re (kib)
NET_RT_DUMP, which otherwise only returned information of AF_MAX.
This was broken in r193232 (save your time - my bug, my fix).
PR: kern/137700
Reported by: Larry Baird (lab gta.com)
Tested by: Larry Baird (lab gta.com)
Reviewed by: zec, lstewart, qing
Approved by: re (kib)
Make regression/priv compile again after the multi-IP jail
changes. Note that we are still using the legacy jail(2)
rather than the jail_set(2)/jail(3) syscall.
Add an IPv4, and an IPv6 loopback address in case we compile
with INET6 enabled.
Make the priv_vfs_extattr_system compile on amd64 as well using the
proper length modifier to printf(3) for ssize_t.
Reviewed by: rwatson
Approved by: re (kib)
band-aid for the general problem that if_link_state_change can be
called between if_detach and if_free leaving a task queued that has
been free'd.
Spotted by: thompsa
Reviewed by: rwatson
Approved by: re (rwatson)
address is configured with a /128 prefix. This is no longer necessary due
to r192011. In fact that code conflicts with r192011. This patch removes
the host route installation when detecting the /128 prefix, and instead
let the code added by r192011 to install the loopback route for that IPv6
interface address.
Reviewed by: bz
Approved by: re