Commit Graph

49 Commits

Author SHA1 Message Date
Philippe Charnier
490d5836b5 The .Nm utility 2002-07-14 14:47:15 +00:00
Ollivier Robert
80077d2cc1 Fix buildworld breakage.
Submitted by:	Maxim Konovalov <maxim@macomnet.ru>
2002-05-09 14:15:57 +00:00
Robert Watson
78bc197134 Grammatical fixes over previous commit.
Submitted by:	ru
2001-11-20 16:33:55 +00:00
Robert Watson
c3ce2b2baa o Allow rarpd to accept an additional '-t directory' argument, specifying
an alternative to /tftpboot.  This is useful it you're using tftpd
  with an alternative root (using -s), and would like rarpd to respond
  selectively to RARP requests using the same criteria as tftp.

Obtained from:	TrustedBSD Project
Sponsored by:	DARPA, NAI Labs
2001-11-16 16:49:21 +00:00
David E. O'Brien
90e655ea4e Perform a major cleanup of the usr.sbin Makefiles.
These are not perfectly in agreement with each other style-wise, but they
are orders of orders of magnitude more consistent style-wise than before.
2001-07-20 06:20:32 +00:00
Matt Jacob
01a0ec6ced make it compile on alpha again 2001-07-05 16:53:49 +00:00
Peter Pentchev
e376b9ff16 Add a -d command-line option; when used in conjunction with -f, rarpd
sends error messages to stderr, normal output to stdout, instead of
logging everything via syslog.

Turn off the FORMAT_AUDIT in the Makefile, until I can figure out how
to disable the check for one single line in the source :(

Reviewed by:	dd, silence on -audit
MFC after:	1 month
2001-06-18 06:48:33 +00:00
Jonathan Lemon
2b4aa63478 Comply with POSIX rules:
o Use %u for printing u_int.
    o Cast sizeof() to u_long, and print with %lu

Reviewed by: wollman
2001-06-16 18:55:13 +00:00
Jonathan Lemon
818b5b7658 Undo last braino and fix properly. 2001-06-16 06:40:03 +00:00
Jonathan Lemon
f4d3963efa Fix warning:
489: warning: int format, different type arg (arg 4)
2001-06-16 06:37:04 +00:00
Bruce Evans
87c5c2d426 Fixed world breakage on systems where ntohl() doesn't return u_long
(e.g., on alphas, or even on i386's with a POSIX-200x-conformant
ntohl() (ntohl() returns uint32_t which is u_int on i386's)).

Fixed related bugs and bogons while I'm here:
- ntohl() was "fixed" for printing in 1 place by casting to
  "(unsigned int )".  This breaks the value on systems where u_int
  is smaller than uint32_t, and has 2 style bugs.
- spell u_int consistently (never use "unsigned").
- break K&R support some more (don't cast malloc()'s arg to a wrong
  type...).
2001-06-13 11:56:00 +00:00
Peter Pentchev
f351b05a52 WARNS=2 cleanup, ANSIfication, manpage mdoc(7) cleanup.
Once again, as explained in my messages to -audit, the ANSIfication comes
as part of the preparation to add a new -d command-line flag to send
output to stdout/stderr.  That commit will come in a week, pending any
further comments/objections.  For those who have missed the -audit mails,
it's at http://people.FreeBSD.org/~roam/bsd/rarpd/usr.sbin-rarpd-d.patch

Asbestos suit:	on ;)
Reviewed by:	dd, silence on -audit
MFC after:	1 month
2001-06-11 09:29:34 +00:00
Ruslan Ermilov
345e52e742 - Backout botched attempt to introduce MANSECT feature.
- MAN[1-9] -> MAN.
2001-03-26 14:42:20 +00:00
Ruslan Ermilov
c73e22c3d4 Set the default manual section for usr.sbin/ to 8. 2001-03-20 18:17:26 +00:00
Ruslan Ermilov
8b5c4af3ff Prepare for mdoc(7)NG. 2000-12-27 15:30:30 +00:00
Ruslan Ermilov
f4d874a1db mdoc(7) police: do not split author names in the AUTHORS section. 2000-11-22 09:35:58 +00:00
Ruslan Ermilov
e97407b4f2 mdoc(7) police: use the new features of the Nm macro. 2000-11-20 20:10:44 +00:00
Sheldon Hearn
3c4d9b1ad5 Fix broken (sectionless) cross-reference in ref 1.10. 2000-11-20 16:09:47 +00:00
Jacques Vidrine
248aee623c Add nsswitch support. By creating an /etc/nsswitch.conf file, you can
configure FreeBSD so that various databases such as passwd and group can be
looked up using flat files, NIS, or Hesiod.

= Hesiod has been added to libc (see hesiod(3)).

= A library routine for parsing nsswitch.conf and invoking callback
  functions as specified has been added to libc (see nsdispatch(3)).

= The following C library functions have been modified to use nsdispatch:
    . getgrent, getgrnam, getgrgid
    . getpwent, getpwnam, getpwuid
    . getusershell
    . getaddrinfo
    . gethostbyname, gethostbyname2, gethostbyaddr
    . getnetbyname, getnetbyaddr
    . getipnodebyname, getipnodebyaddr, getnodebyname, getnodebyaddr

= host.conf has been removed from src/etc.  rc.network has been modified
  to warn that host.conf is no longer used at boot time.  In addition, if
  there is a host.conf but no nsswitch.conf, the latter is created at boot
  time from the former.

Obtained from:	NetBSD
2000-09-06 18:16:48 +00:00
Philippe Charnier
b7e469ad10 Remove incorrect section name. Incomplete -Wall cleaning. 1999-11-27 17:06:40 +00:00
Peter Wemm
e46b89dc93 Fix warning: return type of main' is not int' 1999-09-15 01:58:44 +00:00
Peter Wemm
97d92980a9 $Id$ -> $FreeBSD$ 1999-08-28 01:35:59 +00:00
Alexander Langer
904b32a9c9 Sync usage string with reality: removed -n, added -s. 1998-12-06 16:31:47 +00:00
Ollivier Robert
88edbb05c3 Fix bug in rarpd:
Explanation of the bug: when processing its first request, rarpd
     opens a routing socket to send requests to the arp table. It keeps
     that socket open afterwards, while waiting for new RARP requests.

     Meanwhile, the data received on the routing socket fill up until
     they are about 8Kbytes in size. Any additional data is lost.

     When rarpd receives its next RARP request, it tries to access the
     ARP table via a routing socket call, then waits for the answer to
     its own request. This answer is lost because the received data is
     already filled: when looking for the reply, rarpd receives only
     8kbytes worth of data, then loops waiting forever.

     Someone please test it on -STABLE and commit it. We can close the PR
     when testing on STABLE is done.

PR:		bin/5669
Submitted by:	Pierre Beyssac <pb@fasterix.freenix.org>
1998-04-02 13:20:15 +00:00
Bruce Evans
cc03533c8d Removed most unused includes of <net/if_var.h> outside the kernel. 1998-01-16 17:38:56 +00:00
Philippe Charnier
aa40a0da51 Mdoc'ify man page. 1997-10-13 11:03:36 +00:00
Warner Losh
6c3f552a31 compare return value from getopt against -1 rather than EOF, per the final
posix standard on the topic.
1997-03-31 05:11:47 +00:00
Peter Wemm
476602a9d0 Revert $FreeBSD$ to $Id$ 1997-02-22 16:15:28 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Garrett Wollman
702a1d0148 Update to match changes in <net/if.h>. 1997-01-03 20:19:50 +00:00
Bill Fenner
a9695b96ac Add -s flag to always supply mapping if known, ignoring the
presence or absence of files in /tftpboot.
1996-11-27 20:45:10 +00:00
Bill Fenner
b60287db00 Make the man page reflect reality. Add BUGS section about DNS.
Logging cleanups (including logging the requestor's MAC address instead
 of the server's).
1996-11-27 20:42:09 +00:00
Bill Paul
7632575be6 Although I got rarpd to work, it was largely through kludgery. Bill
Fenner was kind enough to point out the error of my ways. This incorporates
diffs from him which:

- Keep everything in network order.
- Log the booted ether & ip address, instead of my address on that net
- change several exit()'s to return()'s, so that rarpd continues running
  even if it thinks it's in a weird state.

One small tweak by me: in rarp_bootable(), we have to make sure to
construct 'ipname' in host byte order (if we don't, we have to
specify /tftpboot/<remote IP in hex> with <remote IP in hex> in
network byte order, which is confusing).

Also restored use of <dirent.h> rather than <sys/dir.h> as pointed
out by bde.

Also updated the man page so that the -v flag is documented.

With any luck, I won't have to touch this thing again.
1996-11-19 23:57:06 +00:00
Bill Paul
5a0da0a5bc Dohw! Left out one important htonl() in update_arptab().
Pointed out by: Bill Fenner
1996-11-18 23:32:55 +00:00
Bill Paul
867de4336b Fix up new rarpd.
This includes the following changes:

- Support for poking ARP entries into the local table is now built
  in, so the arptab.c module I hacked together is no longer needed.

- rarp_process() and rarp_reply() now accept a len argument which is
  passed down from rarp_loop() which tells rarp_reply() exactly how
  long the original RARP frame was. (Usually, it's 60 bytes, which is
  the minimum.) Previously, the length was calculated using the sum
  of sizeof(struct ether_header) + sizeof(struct ether_arp) (plus the
  ethernet frame header, I think). The result was a total packet
  length of 42 bytes. Now, rarp_reply() sends out packets that are
  the same size as those it recieves (60 bytes). This agrees with the
  behavior of rarpd on SunOS (as observed with tcpdump). The unused
  extra bytes are zeroed.
1996-11-18 22:07:41 +00:00
Bill Paul
557201898b This commit was generated by cvs2svn to compensate for changes in r19855,
which included commits to RCS files with non-trunk default branches.
1996-11-18 21:53:21 +00:00
Bill Paul
4bef56e86c Import new version of rarpd from the BPF 1.1 distribution from LBL.
Obtained from: LBL, BPF 1.1 distribution
1996-11-18 21:53:21 +00:00
Bruce Evans
0c8ea4d48c Eliminated includes of the "temporary" backwards compatibility header
<sys/dir.h> in applications.  Maintained existing (inadequate) ifdefs
for dir.h vs dirent.h in libdialog, amd and rarpd, but didn't add any
new ones.
1996-09-24 08:08:11 +00:00
Bill Paul
81ff470f7a It appears that with FreeBSD-current, we need to set the ethernet
frame type in network byte order. The htons() that wasn't needed in
2.1 is now required in 2.2.

Ultimately, this rarpd should be replaced with the more recent one
supplied with the new BPF distribution.
1996-08-24 23:05:08 +00:00
Mike Pritchard
4a8d02835c Fix a bunch of spelling errors in a bunch of man pages. 1996-01-30 13:52:50 +00:00
Peter Wemm
a5b996a7ec recording cvs-1.6 file death 1995-12-30 19:02:48 +00:00
Bill Paul
cef6b9bc3e Use daemon() to deamonify ourselves. 1995-07-18 21:35:32 +00:00
Rodney W. Grimes
709e8f9ae1 Remove trailing whitespace. 1995-05-30 03:57:47 +00:00
Bill Paul
84e41ecfbe Get rid of ether_addr.c: it's been moved to libc. Also add proper
declaration for ether_ntohost(). (Does anyone know what header file
is supposed to contain the declarations for the ether_addr functions?
I can't them in the SunOS includes anywhere.)
1995-04-02 01:35:54 +00:00
Bill Paul
7112864e5c Make sure we free() the result returned to us by yp_match(). 1995-03-26 02:37:00 +00:00
Bill Paul
7757d94047 ether_addr.c:
- Implement ether_hostton()
- Implement ether_aton()
- Modify ether_aton() and ether_ntoa() to match the semantics of the
SunOS versions of these functions.
- Neaten up ether_hostton() and ether_ntohost() a little.
- Get rid of ether_print() since it isn't needed for rarpd and it isn't
documented as a standard ethers(5) function.

rarpd.8:

- Make it clear that the 'ipaddr' that rarpd looks for in /tftpboot
is actually in hexadecimal (as in /tftpboot/803B4032) since those who
are not versed in the black art of system administration are not likely
to know this.
1995-03-05 22:04:05 +00:00
Bruce Evans
84428d8465 Don't depend on <stdio.h> bogusly including <sys/types.h>. 1995-03-05 02:19:21 +00:00
Bill Paul
112072599b Gave rarpd back the ability to poke temporary entries into the arp
table; arptab.c is really a hacked up version of arp.c that only
supports adding temporary entries. (This stuff is nasty -- I wish I
knew what was so wrong with SIOCSARP/SIOCGARP/etc... that made the
BSD developers decide to take it out.) The idea here is that the
client issuing the rarp is expected to be in the middle of booting
and would therefore be unable to answer arp queries from other machines
on the wire. Having rarpd stuff a temporary entry for the booting
host into the local arp table helps keep arp requests from going unanswered.

Also added ether_print() and ether_ntoa() to the ether_addr.c module.
Eventually I'll get ether_aton() and ether_hostton() written and
then this file can be dropped straight into libc. (Assuming no one
objects, of course. :)
1995-03-03 22:20:15 +00:00
Bill Paul
9636a39a61 Obtained from: An old BPF release packaged with the tcpdump-2.0 source code.
"Yes Virginia, there is a rarpd."

(Before anyone asks, this *not* the rarpd from NetBSD. It did come from
the same place as theirs, however.)

This is a port of the rarpd program included with the tcpdump-2.0
source code (which I finally unearthed after scrounging around
some of the darker corners of the Internet). It's as close to the
original as I could keep it except for the following changes:

- The original program was based on an older version of the Berkeley
  Packet Filter which used different filter programming instructions.
  Fortunately, an updated RARP packet filter is available right in the
  BPF man page so this was easy to fix.

- The old code didn't know how to deal with variable length addresses
  in ifreq buffers. This has been fixed.

- Some byte order weirdness had to be fixed. The sanity checks in
  rarp_check() needed some htons()es, and the rarp_reply() function
  needed to properly set the ether_type field in the ethernet header
  to ETHERTYPE_REVARP before transmitting the packet, otherwise
  the bytes in ether_type would wind up reversed. It is important to note
  that using htons(ETHERTYPE_REVARP) will not work. This is odd, because
  the NetBSD rarpd uses htons(ETHERTYPE_REVARP). (Praise be to tcpdump:
  I would never have been able to track this silliness down without it.)

- The update_arptab() function has been castrated. It depends on
  SIOCSARP which has been deprecated in 4.4BSD. The NetBSD people
  don't seem to be using this function either. It wouldn't be too
  hard to replace this with equivalent code from arp.c, but it
  might not be necessary.

- I put together an ether_ntohost() support function that allows
  both local (/etc/ethers) and NIS lookups. This stuff should go
  in libc at some point, but nothing else seems to need it for now,
  so it can wait a while.

As you may have guessed, you need to have the Berkeley Packet Filter in
your kernel in order to use this program. The good news is that together
with the recently added bootparamd, you can use finally use a FreeBSD
box to boot Sun boxes over the network. (This was my whole motivation
for getting this stuff to work: I have this one subnet that has a whole
bunch of Sun3 X-terminals on it with only two Sun4 workstations, both
of which are locked in peoples' offices. If those two machines crash
(and they do every so often) then none of the X-terms will boot. Now I
can use a spare PC that I have as a boot server. :)
1995-03-02 06:41:40 +00:00