This driver was developed for the LAN7800 and the register-compatible
LAN7515 and has only been tested on those devices. Adding support for
other members of the family should be straightforward, once we have
devices to test.
With this change the driver will probe but fail to attach due to the
Chip ID check, but will leave a hint leading to the driver that needs
work.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15537
We're dropping the periph lock then dropping the refcount. However,
that violates the locking protocol and is racy. This seems to be
the cause of weird occasional panics with a bogus assert.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D15517
Instead, construct an auxargs array and copy it out all at once.
Use an array of Elf_Auxinfo rather than pairs of Elf_Addr * to represent
the array. This is the correct type where pairs of words just happend
to work. To reduce the size of the diff, AUXARGS_ENTRY is altered to act
on this array rather than introducing a new macro.
Return errors on copyout() and suword() failures and handle them in the
caller.
Incidentally fixes AT_RANDOM and AT_EXECFN in 32-bit linux on amd64
which incorrectly used AUXARG_ENTRY instead of AUXARGS_ENTRY_32
(now removed due to the use of proper types).
Reviewed by: kib
Comments from: emaste, jhb
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15485
the DMAP region on arm64.
We already have the needed information to build these tables, we just need
to extract it. This significantly simplifies the code.
Obtained from: ABT Systems Ltd
Sponsored by: Turing Robotic Industries
set. This memory must not be mapped by the operating system other than
under control of the device driver.
Obtained from: ABT Systems Ltd
Sponsored by: Turing Robotic Industries
The scans are largely independent, so this helps make the code
marginally neater, and makes it easier to incorporate feedback from the
active queue scan into the page daemon control loop.
Improve some comments while here. No functional change intended.
Reviewed by: alc, kib
Differential Revision: https://reviews.freebsd.org/D15490
Remove the device from the list before unbinding it. Doing it in this
order allows calling xen_intr_unbind without holding the bind_mutex
lock.
Sponsored by: Citrix Systems R&D
There's no need to perform the interrupt unbind while holding the
blkback lock, and doing so leads to the following LOR:
lock order reversal: (sleepable after non-sleepable)
1st 0xfffff8000802fe90 xbbd1 (xbbd1) @ /usr/src/sys/dev/xen/blkback/blkback.c:3423
2nd 0xffffffff81fdf890 intrsrc (intrsrc) @ /usr/src/sys/x86/x86/intr_machdep.c:224
stack backtrace:
#0 0xffffffff80bdd993 at witness_debugger+0x73
#1 0xffffffff80bdd814 at witness_checkorder+0xe34
#2 0xffffffff80b7d798 at _sx_xlock+0x68
#3 0xffffffff811b3913 at intr_remove_handler+0x43
#4 0xffffffff811c63ef at xen_intr_unbind+0x10f
#5 0xffffffff80a12ecf at xbb_disconnect+0x2f
#6 0xffffffff80a12e54 at xbb_shutdown+0x1e4
#7 0xffffffff80a10be4 at xbb_frontend_changed+0x54
#8 0xffffffff80ed66a4 at xenbusb_back_otherend_changed+0x14
#9 0xffffffff80a2a382 at xenwatch_thread+0x182
#10 0xffffffff80b34164 at fork_exit+0x84
#11 0xffffffff8101ec9e at fork_trampoline+0xe
Reported by: Nathan Friess <nathan.friess@gmail.com>
Sponsored by: Citrix Systems R&D
The user-space xenstore device is currently lacking a check to make
sure that the caller is only using transaction ids currently assigned
to it. This allows users of the xenstore device to hijack transactions
not started by them, although the scope is limited to transactions
started by the same domain.
Tested by: Nathan Friess <nathan.friess@gmail.com>
Sponsored by: Citrix Systems R&D
This is hardware support for the SO_MAX_PACING_RATE sockopt (see
setsockopt(2)), which is available in kernels built with "options
RATELIMIT".
Relnotes: Yes
Sponsored by: Chelsio Communications
Allow user-space applications to register watches using the xenstore
device. This is needed in order to run toolstack operations on
domains different than the one where xenstore is running (in which
case the device is not used, since the connection to xenstore is done
using a plain socket).
Tested by: Nathan Friess <nathan.friess@gmail.com>
Sponsored by: Citrix Systems R&D
Due to the current synchronous xenstore implementation in FreeBSD, we
cannot return from xs_read_reply without reading a reply, or else the
ring gets out of sync and the next request will read the previous
reply and crash due to the type mismatch. A proper solution involves
making use of the req_id field in the message and allowing multiple
in-flight messages at the same time on the ring.
Remove the PCATCH flag so that signals don't interrupt the wait.
Tested by: Nathan Friess <nathan.friess@gmail.com>
Sponsored by: Citrix Systems R&D
There's no need to prevent suspend while doing xenstore transactions,
callers of transactions are supposed to be prepared for a transaction
to fail.
This fixes a bug that could be triggered from the xenstore user-space
device, since starting a transaction from user-space would result in
returning there with a sx lock held, that causes a WITNESS check to
trigger.
Tested by: Nathan Friess <nathan.friess@gmail.com>
Sponsored by: Citrix Systems R&D
We certainly should clear PSL_T when calling the SIGTRAP signal
handler, which is already done by all x86 sendsig(9) ABI code. On the
other hand, there is no obvious reason why PSL_T needs to be cleared
when returning from the signal handler. For instance, Linux allows
userspace to set PSL_T and keep tracing enabled for the desired
period. There are userspace programs which would use PSL_T if we make
it possible, for instance sbcl.
Remember if PSL_T was set by PT_STEP or PT_SETSTEP by mean of TDB_STEP
flag, and only clear it when the flag is set.
Discussed with: Ali Mashtizadeh
Reviewed by: jhb (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D15054
The core clock (armclk) on RockChip SoC is special.
It can derive it's clock from many PLLs but RockChip recommand to do it
from "apll" on old SoC and "npll" on new SoC. The reason for choosing npll
is that it's have less jitter and is more close to the arm core on the SoC.
r333314 added the core clock as a composite clock but due to it's specials
property we need to deal with it differently.
A new rk_clk_armclk type is added for this and it supports only the "npll"
as we don't run on old RockChip SoC that only have the "apll".
It will always reparent to "npll" and set the frequency according to a rate
table that is known to be good.
For now we set the "npll" to the desired frequency and just set the core clk
divider to 1 as its parent it just used for the core clk.
on thread in post-processing.
To generate stacks for just ${THREADID}:
pmcstat -R ${PREFIX}.pmcstat -L ${THREADID} -z100 -G ${PREFIX}.stacks
Sponsored by: Limelight Networks
Its absence meant that GEOM direct dispatch was disabled (the service
routines check the current thread's stack usage to determine whether
to hand off the request to a dedicated thread), and this change is
sufficient to enable direct dispatch by default.
Reviewed by: allanjude
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D15527
According to PR there are cases of controller hang if soft reset is
sent before device report ready status after the hard reset.
I don't think this patch is perfect, but it was reported as working
by the submitter, and I have neither the old hardware nor interest to
test some improved version, so just done some style cleaning.
PR: 183294
Submitted by: alexandre.martins@netasq.com
MFC after: 1 month
As reported in PR184149, it can happen that epair devices can have the same
MAC address.
This solution is based on a 32-bit hash, obtained combining the if_index of
the a interface and the hostid.
If the hostid is zero, a random number is used.
PR: 184149
Reviewed by: wollman, eugen
Approved by: cognet
Differential Revision: https://reviews.freebsd.org/D15329
Yet another preemption request hitting between the counter being 0
and the check being reached will result in the flag no longer being
set.
Note the situation was already present prior to r334062 and is harmless.
Reported by: pho
Reviewed by: kib
