Commit Graph

9 Commits

Author SHA1 Message Date
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Bill Paul
d2aaa9a7a6 Convert the ASIX and Macronix drivers to newbus. 1999-07-24 20:52:57 +00:00
Bill Paul
74e5e304a4 Fix support for the PNIC II. Earlier I had assumed that the PNIC II was
similar to the PNIC I (supported by the pn driver). In fact, it's really
a Macronix 98715A with wake on LAN support added. According to LinkSys,
the PNIC II was jointly developed by Lite-On and Macronis. I get the
feeling Macronix did most of the work. (The datasheet has the Macronix
logo on it, and is in fact nearly identical to the 98715 datasheet, except
for the extra wake on LAN registers.) In any case, the PNIC II works just
fine with the Macronix driver.

The changes are:

- Move PCI ID for the PNIC II from the pn driver to the mx driver.
- Mention PNIC II support in mx.4.
- Mention PNIC II support in RELNOTES.TXT and HARDWARE.TXT.
1999-05-28 18:43:25 +00:00
Andrew Gallatin
50b8d1cce4 Allow chipset drivers to specify the direct-mapped DMA window's mask in
preparation for tsunami support.  Previous chipsets' direct-mapped DMA
mask was always 1024*1024*1024.  The Tsunami chipset needs it to be
2*1024*1024*1024

These changes should not affect the i386 port

Reviewed by:	Doug Rabson <dfr@nlsystems.com>
1999-05-26 23:01:57 +00:00
Bill Paul
727c88e9da Tweak the Macronix driver to hopefully make it more reliable:
- Change to the same transmit scheme as the PNIC driver.
- Dynamically set the cache alignment, and set burst size the same as
  the PNIC driver in mx_init().
- Enable 'store and forward' mode by default. This is the slowest option
  and it does reduce 100Mbps performance somewhat, but it's the most
  reliable setting I can find. I'm more interested in having the driver
  work reliably than trying to squeeze the best performance out of it.
  The reason I'm doing this is that on *some* systems you may see a lot
  of transmit underruns (which I can't explain: these are *fast* test
  systems) and these errors seem to cause unusual and decidedly
  non-tulip-like behavior. In normal 10Mbps mode, performance is fine
  (you can easily saturate a 10Mbps link).

Also tweak some of the other drivers:

- Increase the size of the TX ring for the Winbond, ASIX, VIA Rhine
  and PNIC drivers.
- Set a larger value for ifq_maxlen in the ThunderLAN driver. The setting
  of TL_TX_LIST_CNT - 1 is too low (the ThunderLAN driver only allocates
  20 transmit descriptors, and I don't want to fiddle with that now
  because the ThunderLAN's descriptor structure is an oddball size
  compared to the others).
1999-05-06 15:32:52 +00:00
Bill Paul
e31c685452 Add PCI IDs for the Compex RL100-TX, which uses the Macronix 98713 chip. 1999-04-08 17:38:05 +00:00
Bill Paul
8919d7d4e7 Make the Macronix driver work on FreeBSD/alpha and add to GENERIC.
Like the PNIC, we have to copy packet headers in the receive handler
because the chip will only DMA to longword aligned buffers.

Also do some mindor cleanups.
1999-04-01 02:09:37 +00:00
Bill Paul
c13be48aee Put back some missing chip identification code that got lost somehow
during a trek through RCS. The Macronix 98713 and 98713A both have the
same PCI device ID but different revision numbers, and we need to be
able to tell one from the other. The 98715 and 98715A chips have the
same device ID as the 98725 chip but different revision numbers, however
we lump them into the same category except when identifying them during
the PCI probe output.

The main reason we need tell the chips apart is that the Macronix app
notes say you have to write a special magic number into one of the
registers in order to put the chip in normal operating mode. The 98713
requires one magic value, while all the others require a different one.
1998-12-04 21:48:12 +00:00
Bill Paul
726ff6a158 An early Christmas present: add driver support for a whole bunch of
PCI fast ethernet adapters, plus man pages.

if_pn.c: Netgear FA310TX model D1, LinkSys LNE100TX, Matrox FastNIC 10/100,
         various other PNIC devices

if_mx.c: NDC Communications SOHOware SFA100 (Macronix 98713A), various
         other boards based on the Macronix 98713, 98713A, 98715, 98715A
         and 98725 chips

if_vr.c: D-Link DFE530-TX, other boards based on the VIA Rhine and
         Rhine II chips (note: the D-Link and certain other cards
         that actually use a Rhine II chip still return the PCI
         device ID of the Rhine I. I don't know why, and it doesn't
         really matter since the driver treats both chips the same
         anyway.)

if_wb.c: Trendware TE100-PCIE and various other cards based on the
         Winbond W89C840F chip (the Trendware card is identical to
         the sample boards Winbond sent me, so who knows how many
         clones there are running around)

All drivers include support for ifmedia, BPF and hardware multicast
filtering.

Also updated GENERIC, LINT, RELNOTES.TXT, userconfig and
sysinstall device list.

I also have a driver for the ASIX AX88140A in the works.
1998-12-04 18:01:24 +00:00