- Add support for ISA based DPT adapters (this doesn't quite work yet).
- Sync dpt_eisa.c with my local copy.
- Simplify how EISA IDs are matched.
- Prototype.
- Formatting nits.
- Conform to how I do things in dpt_pci.c/dpt_isa.c.
- Modify dpt_scsi.c:dpt_alloc() to DTRT with newbus.
- Add some comments to dpt_scsi.c:dpt_pio_get_conf().
- Add additional check to dpt_scsi.c:dpt_get_conf().
- Add some useful error messages to dpt_scsi.c:dpt_init().
When an NCP reaches TLF, *ONLY* datalink_Close() links that are
in DATALINK_OPEN.
When the last link reaches TLD, DOWN all NCPs (as we used to in the
links TLF (which was the wrong place anyway)), as the NCPs aren't
now going to datalink_Close() us unexpectedly, we get to continue
doing what we were told to do in the first place.
The result: When we lose a link, the IPCP layer goes down and
we actually call the stuff in ppp.linkdown !
the ports and doc trees. There is no change if we are not building a
release (i.e., we are not using a tag of the form RELENG_ver_RELEASE
--e.g., a RELENG_ver tag used to build a snapshot).
This should allow the ports and doc freezes during the release cycles
to be somewhat shorter, as commits to those (non-branched) trees can
resume as soon as the tags are laid down.
Reviewed by: nik
Approved by: jkh
request could be deallocated before the top half had finished
issuing it. The problem seems only to happen with IDE drives
and vn devices, but theoretically it could happen with any
drive. This is the most important part of a possible series
of fixes designed to remove race conditions without locking
out interrupts for longer than absolutely necessary.
Reported-by: sos
Fix-supplied-by: dillon
From the README:
Any IEEE 802.11 cards use AMD Am79C930 and Harris (Intersil) Chipset
with PCnetMobile firmware by AMD.
BayStack 650 1Mbps Frequency Hopping PCCARD adapter
BayStack 660 2Mbps Direct Sequence PCCARD adapter
Icom SL-200 2Mbps Direct Sequence PCCARD adapter
Melco WLI-PCM 2Mbps Direct Sequence PCCARD adapter
NEL SSMagic 2Mbps Direct Sequence PCCARD adapter
Netwave AirSurfer Plus
1Mbps Frequency Hopping PCCARD adapter
Netwave AirSurfer Pro
2Mbps Direct Sequence PCCARD adapter
Known Problems:
WEP is not supported.
Does not create IBSS itself.
Cannot configure the following on FreeBSD:
selection of infrastructure/adhoc mode
ESSID
...
Submitted by: Atsushi Onoe <onoe@sm.sony.co.jp>
line in files or files.${arch} instead of 13 lines of code.
This is a small chance that this will break the alpha kernel build - I'll
fix it this evening if it does.
It is not default because it's an expensive option by nature, making the
search take 2-3 times as long.
PR: 17555
Submitted by: Ian Dowse <iedowse@maths.tcd.ie>
things get a bit out-of-phase when we step backwards 1 hour from
between 0:00 and 1:00 on the first of the month following the
transition into Summer time. This is probably actually a bug
in mktime().
PR: 10963
If mktime() fails and 68 < year < 138, assume that the reason is
because of Summer time and adjust up or down according to our
adjusting context by one hour. This assumes that all DSTs are
multiples of 1 hour.
PR: 6223, 17750
connected during boot and the vpo module is in the kernel/loaded.
In the case where the module is loaded at some later stage with kldload,
the CAM bus is now rescanned as well.
people have suggested the workaround to me (use only PIO mode) and
I've not seend a message saying ths was fixed. I'll removed the bold
warning stars after the issue is corrected.
- The driver now uses bus_space() and runs on NetBSD 1.4.2
Submitted by Thomas Klausner <wiz@danbala.ifoer.tuwien.ac.at>
- Remove startup quirks for video and vbi capture for PAL users.
PAL TV users can now run FXTV and Alevt in any order.
- Add support for cable channels >100
Submitted by Scott Presnell <srp@zgi.com>
- New MSP3410/3415 setup code added. This is experimental.
Please set the sysctl hw.bt848.slow_msp_audio to 1 for this.
Submitted by Frank Nobis<fn@radio-do.de>
