Commit Graph

106858 Commits

Author SHA1 Message Date
Christian Brueffer
4bea5fa544 Autogenerate device listings for axe(4) and rue(4) 2004-08-25 22:57:07 +00:00
Christian Brueffer
b952b473dd Add axe(4) and rue(4) 2004-08-25 22:55:02 +00:00
Christian Brueffer
25122f37e7 - move list of supported adapters into a HARDWARE section
- fix capitalization of a "to"
- bump document date

MFC after:	3 days
2004-08-25 22:46:36 +00:00
Christian Brueffer
a173ee89bc - put the list of supported adapters into a HARDWARE section
- make the Buffalo entry look better
- properly capitalize Ethernet and Fast Ethernet
- bump document date

MFC after:	3 days
2004-08-25 22:39:05 +00:00
Simon L. B. Nielsen
05893e23b1 Fix grammar nit.
Submitted by:	brueffer
MFC after:	2 days
2004-08-25 22:36:47 +00:00
Marius Strobl
8f0882f544 Don't call uart_bus_probe() for non-matching PnP-devices. Trying to probe
the keyboard controller with uart_bus_probe() caused a hang here on an i386
machine.

Approved by:	marcel
2004-08-25 22:15:33 +00:00
Ruslan Ermilov
e5d264a34b Fix "make world DESTDIR=/mnt" to work again. A recent change
to make(1) that causes command-line variables to be passed as
command-line variables to sub-processes that make(1) executes
broke it.  By changing the type of all DESTDIR variables used
internally in Makefile.inc1, from environment to command-line
variables of the highest priority, I was able to "make world"
with success, with the command-line variable DESTDIR set.
2004-08-25 22:06:29 +00:00
Robert Watson
161a0c7cff Don't hold the UNIX domain socket subsystem lock over the body of the
UNIX domain socket garbage collection implementation, as that risks
holding the mutex over potentially sleeping operations (as well as
introducing some nasty lock order issues, etc).  unp_gc() will hold
the lock long enough to do necessary deferal checks and set that it's
running, but then release it until it needs to reset the gc state.

RELENG_5 candidate.

Discussed with:	alfred
2004-08-25 21:24:36 +00:00
Nate Lawson
b0e7e61135 Remove code to initialize the lid state at boot. It interfered with lid
operation for some users with pure GPE lid switches (vs. embedded
controller.)

Tested by:	Anish Mistry <mistry.7_at_osu.edu>
MFC after:	3 days
2004-08-25 20:09:15 +00:00
Warner Losh
6586253a61 Recommend using make kernel for current -> current upgrades. No reason
to have multiple commands for that.
Use relative paths into the src tree consistantly in the instructions.
Fix minor nits that have crept into things.

# is preseedrandom still necessary?
2004-08-25 19:39:13 +00:00
Pawel Jakub Dawidek
4cf67afe37 Log verification errors at level 1. 2004-08-25 19:18:07 +00:00
Max Laier
8e7c23d74f Document supported devices here (for lack of a better place). Users
interested in ALTQ are likely to type in "man altq" at some point and maybe
they will scroll down to the bottom as well.

MFC after:	3 days
2004-08-25 18:49:32 +00:00
David E. O'Brien
2e262ac39b Fix a bug in in_cksum_hdr w/o -O.
The C code assumes that the carry bit is always kept from the previous
operation. However, the pointer indexing requires another add operation.
Thus, the carry bit from the first operation is tromped over by the
"addl" operation that ends up following it, so the "adcl" that follows
that has no effect because the carry bit is cleared before it.
The result is checksum failure on received packets.

The larger issue is that there isn't any other way of preventing the compiler
inserting arbitrary instructions between different __asm statements (and
that the commit message in revision 1.13 of in_cksum.h is wrong on
this point).  From
http://developer.apple.com/documentation/DeveloperTools/gcc-3.3/gcc/Extended-Asm.html
	---8<---8<---8<---
	You can't expect a sequence of volatile asm instructions to remain
	perfectly consecutive. If you want consecutive output, use a single
	asm.  Also, GCC will perform some optimizations across a volatile
	asm instruction; GCC does not "forget everything" when it encounters
	a volatile asm instruction the way some other compilers do.
	---8<---8<---8<---

Also, this change also makes the ASM code much easier to read.

PR:		69257
Submitted by:	Mike Bristow <mike@urgle.com>, Qing Li <qing.li@bluecoat.com>
2004-08-25 18:28:15 +00:00
David E. O'Brien
016bdcb36a Correct style nit in rev 1.17. 2004-08-25 17:54:19 +00:00
Robert Watson
e2d2098653 Convert a mtx_lock(&Giant) to a mtx_unlock(&Giant) in nfsrv_link() to
prevent leakage of Giant.  With INVARIANTS, this results in an
assertion failure following execution of the RPC.  Without INVARIANTS,
it could result in problems if the NFS server is killed causing nfsd
to return to user space holding Giant.

Feet provided by:	brueffer
2004-08-25 16:52:59 +00:00
Peter Pentchev
97c6143c95 Do not display bogus entries for sockets in the TIME_WAIT or similar
states that no longer have a corresponding file descriptor - until now,
sockstat would mostly randomly match null kern.file.*.xf_data fields
with the first mostly-closed socket.

This bugfix is a RELENG_5 candidate.

Approved by:	andre
2004-08-25 16:36:17 +00:00
Martin Blapp
be460b9467 Add special case for the german whois nameserver. Without the
'-T dn,ace -C US-ASCII' option one does only get:

$ whois nic.de

domain:    nic.de
status:    connect

More information available on:

http://www.denic.de/en/domains/technik/denic_whois-server/index.html

MFC:	3 days
2004-08-25 15:34:44 +00:00
Maxim Konovalov
64215f652a Add -j flag to usage() and the man page synopsis.
Inspired by:	DragonFlyBSD
2004-08-25 13:15:07 +00:00
Pawel Jakub Dawidek
f0c8658d4e Dump disk number. 2004-08-25 12:14:44 +00:00
Christian Brueffer
87f3d8beba Move a paragraph from the HARDWARE section back into the
DESCRIPTION section.  Also adapt it to make it fit in better.

Requested by:	simon
2004-08-25 11:57:06 +00:00
Pawel Jakub Dawidek
a7f3feff1b Allocate memory when dumping pipes with M_WAITOK flag.
On a system with huge number of pipes, M_NOWAIT failes almost always,
because of memory fragmentation.
My fix is different than the patch proposed by Pawel Malachowski,
because in FreeBSD 5.x we cannot sleep while holding dummynet mutex
(in 4.x there is no such lock).
My fix is also ugly, but there is no easy way to prepare nice and clean fix.

PR:		kern/46557
Submitted by:	Eugene Grosbein <eugen@grosbein.pp.ru>
Reviewed by:	mlaier
2004-08-25 09:31:30 +00:00
Marcel Moolenaar
04f093dde7 Get a step closer to profiling the kernel by fixing the definitions
of the MCOUNT_ENTER, MCOUNT_EXIT and MCOUNT_DECL defines. Also make
sure there's a prototype of _MCOUNT_DECL(). This allows us to build
a kernel. There are still unresolved symbols, so linking fails.
2004-08-25 08:03:48 +00:00
Marcel Moolenaar
09814dd676 Have the linker provide btext. It's used for profiling. 2004-08-25 07:43:28 +00:00
Marcel Moolenaar
f0556e70bb Make profiling actually work. The gcc compiler emits a call to the
_mcount() stub when profiling is enabled. Emit this code sequence
for assembly routines as welli (MCOUNT definition in <machine/asm.h>.
We do not pass the GOT entry however as the 4th argument, because it's
not used. The _mcount() stub calls __mcount(), which does the actual
work. Define _MCOUNT_DECL to define __mcount. We do not have an
implementation of mcount(), so we define MCOUNT as empty, but have a
weak alias to _mcount() in _mcount.S.
Note that the _mcount() stub in the kernel is slightly different from
the stub in userland. This is because we do not have to worry about
nested routines in the kernel.
2004-08-25 07:42:34 +00:00
David E. O'Brien
bd3be3789f No longer do special handling of Perl. FreeBSD users have all of 5.x
to get used to the fact that Perl is no longer part of the base system.
It is practically impossible to install any useful package and not get
Perl automatically pulled in as a dependency.  So the typical user will
get their Perl.

This change greatly reduces the amount of manual labor in building the
miniinst.iso in release building.
2004-08-25 03:38:05 +00:00
Robert Watson
5162f7de6f if_dc includes locking, but that locking is disabled by a #ifdef
by default.  As such, mark if_dc as IFF_NEEDSGIANT until such
time as appropriate locking review and testing can take place,
and the locking can be enabled by default.

RELENG_5 candidate.
2004-08-25 03:37:25 +00:00
Ken Smith
79a58dfb4c Back out v1.57, the underlying problem that caused a delay between
mdconfig and the device name appearing in /dev seems to be fixed.
2004-08-25 01:39:52 +00:00
Robert Watson
640c9dcf69 In nfs_timer(), pass curthread rather than &thread0 into the protocol
send routine.  In IPv6 UDP, the thread will be passed to suser(), which
asserts that if a thread is used for a super user check, it be
curthread.  Many of these protocol entry points probably need to
accept credentials instead of threads.

MT5 candidate.

Noticed/tested by:	kuriyama
2004-08-25 01:23:38 +00:00
Ken Smith
bdc3b545e8 Back out previous commit. Colin's fix to md makes the extra sleep
here unnecessary.  Thanks Colin. :-)
2004-08-25 00:48:35 +00:00
Paul Richards
e88261150a Add a CVSTAG makefile variable that can be set in /etc/make.conf that
determines which CVS tag to track when running make update. This makes
it easier to configure a box to track a particular release if it does
automated updates from a cvs repository.
2004-08-24 23:12:16 +00:00
Warner Losh
4d855643d1 Clarify what the lockfunc is used for. When it will be called and
when it won't be called.  The old wording was correct, but not
sufficiently specific to understand when and how it would be called.
The new wording describes the current implementation's usage (which
should be updated if other appropriate times are decided upon),
specifically that it is called only when the load operation is
deferred to keep the locking state consistent.  When the operation
isn't deferred, the calling routine is assumed to have a coherent
locking world.

Reviewed by: scottl
2004-08-24 23:09:57 +00:00
Alfred Perlstein
3b28ee84a6 note that it is the caller's responsibility to free any buffer passed
to setvbuf(3) and friends.
2004-08-24 21:48:21 +00:00
Josef El-Rayes
b5da7629ec Argh. Forced commit to note that this was
Approved by:	wes
2004-08-24 21:41:00 +00:00
Christian Brueffer
1adc7abfa1 Autogenerate device listings for lge(4) and vx(4) 2004-08-24 21:38:13 +00:00
Josef El-Rayes
492a63d6a0 Add snapshots.se.freebsd.org to list of available ftp mirrors.
Dont forget to use X-LATEST as Release Name (where X is version major number)
when you choose a snapshot server.
2004-08-24 21:37:46 +00:00
Christian Brueffer
792adb3e99 Add lge(4) and vx(4) 2004-08-24 21:35:25 +00:00
Christian Brueffer
5ec53aea6c - move the list of supported devices into a HARDWARE section
- bump document date
2004-08-24 21:33:14 +00:00
Christian Brueffer
a0f1044f23 - move device listing and hardware notes into a HARDWARE section
- properly capitalize Gigabit Ethernet
- bump document date
2004-08-24 21:32:03 +00:00
John Baldwin
ef36ad6921 Correct the arguments to kern_sigaltstack() as they were reversed.
PR:		kern/68079
Submitted by:	Georg-W. Koltermann gwk at rahn-koltermann dot de
2004-08-24 20:52:52 +00:00
John Baldwin
8a7aa72dec Regenerate after fcntl() wrappers were marked MP safe. 2004-08-24 20:24:34 +00:00
John Baldwin
2ca25ab53e Fix the ABI wrappers to use kern_fcntl() rather than calling fcntl()
directly.  This removes a few more users of the stackgap and also marks
the syscalls using these wrappers MP safe where appropriate.

Tested on:	i386 with linux acroread5
Compiled on:	i386, alpha LINT
2004-08-24 20:21:21 +00:00
Søren Schmidt
1c01d05f9c Sii_reset needs to wait up to 1 second to get slow disks with it so
use tsleep instead of DELAY.
2004-08-24 20:11:26 +00:00
Simon L. B. Nielsen
2ca6bcde9d asr(4) is currently i386 only.
Confirmed by:	scottl
MFC after:	2 days
2004-08-24 19:24:47 +00:00
Nate Lawson
dc6851d588 Catch up with i386 nexus.c rev 1.59: add bus_get_resource_list(). 2004-08-24 19:22:54 +00:00
Ruslan Ermilov
05731cd2e1 share/examples/worm is dead. 2004-08-24 19:03:55 +00:00
David E. O'Brien
6cda6c4a35 sr(4) definately won't work on IA64. 2004-08-24 18:31:27 +00:00
Nate Lawson
9f65aa0340 Be sure to always unlock the sx lock when exiting the sysctl function.
MFC after:	3 days
2004-08-24 17:53:25 +00:00
Christian Brueffer
89641ab32a Autogenerate device listings for sk(4) 2004-08-24 17:41:47 +00:00
Christian Brueffer
a81cd4dc04 Add sk(4) 2004-08-24 17:40:35 +00:00
Christian Brueffer
7b444fcaf9 - move the list of supported adapters to a HARDWARE section
- correct entry for the Belkin card (we don't support 10GbE in sk(4)) :-)
- properly capitalize Gigabit Ethernet
- wordsmithing on a sentence
- bump document date
2004-08-24 17:38:53 +00:00