Originally, on the VAX exect() enable tracing once the new executable
image was loaded. This was possible because tracing was controllable
through user space code by setting the PSL_T flag. The following
instruction is a system call that activated tracing (as all
instructions do) by copying PSL_T to PSL_TP (trace pending). The
first instruction of the new executable image would trigger a trace
fault.
This is not portable to all platforms and the behavior was replaced with
ptrace(PT_TRACE_ME, ...) since FreeBSD forked off of the CSRG repository.
Platforms either incorrectly call execve(), trigger trace faults inside
the original executable, or do contain an implementation of this
function.
The exect() interfaces is deprecated or removed on NetBSD and OpenBSD.
Submitted by: Ali Mashtizadeh <ali@mashtizadeh.com>
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D14989
This caching has existed since the CSRG import, but serves no obvious
purpose. Sure, setlogin() is called rarely, but calls to getlogin()
should also be infrequent. The required invalidation was not
implemented on aarch64, arm, mips, amd riscv so updates would never
occur if getlogin() was called before setlogin().
Reported by: Ali Mashtizadeh <ali@mashtizadeh.com>
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14965
objects' init functions instead of doing the setup via a constructor
in libc as the init functions may already depend on these handlers
to be in place. This gets us rid of:
- the undefined order in which libc constructors as __guard_setup()
and jemalloc_constructor() are executed WRT __sparc_utrap_setup(),
- the requirement to link libc last so __sparc_utrap_setup() gets
called prior to constructors in other libraries (see r122883).
For static binaries, crt1.o still sets up the user trap handlers.
o Move misplaced prototypes for MD functions in to the MD prototype
section of rtld.h.
o Sprinkle nitems().
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using mis-identified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
MDSRCS it intended to allow assembly versions of funtions with C
implementations listed in MISRCS. The selection of the correct
machdep_ldis?.c for a given architecture does not follow this pattern
and the file should be added to SRCS directly.
Reviewed by: emaste, imp, jhb
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9841
- Remove .c files which duplicate entries in MISRCS.
- Use the same, less merge conflict prone style in all cases.
- Use MDSRCS for mips (.c and .S files both ended up in SRCS).
- Remove pointless sparc64 Makefile.inc.
- Remove uninformative foreign VCS ID entries.
Reviewed by: emaste, imp, jhb
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9841
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
The initial value of NOASM is nearly the same in all cases and the
initial value of PSEUDO is the same in all cases so reduce duplication
(and hopefully, future merge conflicts) by machine independent defaults.
Also document the PSEUDO variable.
Reviewed by: jhb, kib
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D7820
Besides removing hand-translation to assembler, this also adds missing
wrappers for arm64 and risc-v.
Reviewed by: emaste, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D7694
value.
This eliminates the need for machine dependant assembly wrappers for
pipe(2).
It also make passing an invalid address to pipe(2) return EFAULT rather
than triggering a segfault. Document this behavior (which was already
true for pipe2(2), but undocumented).
Reviewed by: andrew
Approved by: re (gjb)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D6815
i386 stopped exporting .cerror in r240152, and likewise for amd64 in
r240178. It is not used by other libraries on any platform, so apply
the same change to the remaining architectures.
Reviewed by: jhibbits, jilles
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5774
They are not used anywhere else in the base system and are an internal
implementation detail that does not need to be exposed.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5728
pwrite(2) syscalls are wrapped to provide compatibility with pre-7.x
kernels which required padding before the off_t parameter. The
fcntl(2) contains compatibility code to handle kernels before the
struct flock was changed during the 8.x CURRENT development. The
shims were reasonable to allow easier revert to the older kernel at
that time.
Now, two or three major releases later, shims do not serve any
purpose. Such old kernels cannot handle current libc, so revert the
compatibility code.
Make padded syscalls support conditional under the COMPAT6 config
option. For COMPAT32, the syscalls were under COMPAT6 already.
Remove WITHOUT_SYSCALL_COMPAT build option, which only purpose was to
(partially) disable the removed shims.
Reviewed by: jhb, imp (previous versions)
Discussed with: peter
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Only i386 and amd64 provide a non-trivial __getcontextx(). Use a common
trivial implementation in gen/ for other architectures, rather than
copying the file to each MD subdirectory.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1472
if not already defined. This allows building libc from outside of
lib/libc using a reach-over makefile.
A typical use-case is to build a standard ILP32 version and a COMPAT32
version in a single iteration by building the COMPAT32 version using a
reach-over makefile.
Obtained from: Juniper Networks, Inc.
shifts into the sign bit. Instead use (1U << 31) which gets the
expected result.
This fix is not ideal as it assumes a 32 bit int, but does fix the issue
for most cases.
A similar change was made in OpenBSD.
Discussed with: -arch, rdivacky
Reviewed by: cperciva
check_deferred_signal() returns twice, since handle_signal() emulates
the return from the normal signal handler by sigreturn(2)ing the
passed context. Second return is performed on the destroyed stack
frame, because __fillcontextx() has already returned. This causes
undefined and bad behaviour, usually the victim thread gets SIGSEGV.
Avoid nested frame and the need to return from it by doing direct call
to getcontext() in the check_deferred_signal() and using a new private
libc helper __fillcontextx2() to complement the context with the
extended CPU state if the deferred signal is still present.
The __fillcontextx() is now unused, but is kept to allow older
libthr.so to be used with the new libc.
Mark __fillcontextx() as returning twice [1].
Reported by: pgj
Pointy hat to: kib
Discussed with: dim
Tested by: pgj, dim
Suggested by: jilles [1]
MFC after: 1 week
but use normal references instead of weak. This makes the statically
linked binaries to use fast gettimeofday(2) by forcing the linker to
resolve references and providing the neccessary functions.
Reported by: bde
Tested by: marius (sparc64)
MFC after: 2 weeks
fit into existing mcontext_t.
On i386 and amd64 do return the extended FPU states using
getcontextx(3). For other architectures, getcontextx(3) returns the
same information as getcontext(2).
Tested by: pho
MFC after: 1 month
working MI one. The MI one only needs to be overridden on machines
with non-IEEE754 arithmetic. (The last supported one was the VAX.)
It can also be overridden if someone comes up with a faster one that
actually passes the regression tests -- but this is harder than it sounds.
Some files keep the SUN4V tags as a code reference, for the future,
if any rewamped sun4v support wants to be added again.
Reviewed by: marius
Tested by: sbruno
Approved by: re
rounding (impl. dep. #55), the SPARC JPS1 responsible for SPARC64 and
UltraSPARC processors defines that in all cases tinyness is detected
before rounding, therefore rounding up to the smallest normalised
number should set the underflow flag.
- If an infinite result is rounded down, the result should have an
exponent 1 less than the value for infinity.
PR: 144900
Submitted by: Peter Jeremy
MFC after: 3 days
operands but not for double and extended double ones. Instead of trying
to fix the macro just nuke it and unroll the loops in the correct way
though as extended double operands turn out to be the only special case.
- For FxTO{s,d,q} the source operand is int64 so rs2 has to be re-decoded
after setting type accordingly as it's generally decoded using the low
2 bits as the type, which are 0 for these three instructions.
- Similarly, in case of F{s,d,q}TOx the target is int64 so rd has to be
re-decoded using not only the operand mask appropriate for int64 but
also the correct register number encoding.
- Use const where appropriate.
- Wrap long lines.
Submitted by: Peter Jeremy (partly)
MFC after: 3 days
It's not necessary to add stdlib directories for each architecture, even
if the architecture doesn't implement any files of its own.
Submitted by: Christoph Mallon
Looking at our source code history, it seems the uname(),
getdomainname() and setdomainname() system calls got deprecated
somewhere after FreeBSD 1.1, but they have never been phased out
properly. Because we don't have a COMPAT_FREEBSD1, just use
COMPAT_FREEBSD4.
Also fix the Linuxolator to build without the setdomainname() routine by
just making it call userland_sysctl on kern.domainname. Also replace the
setdomainname()'s implementation to use this approach, because we're
duplicating code with sysctl_domainname().
I wasn't able to keep these three routines working in our
COMPAT_FREEBSD32, because that would require yet another keyword for
syscalls.master (COMPAT4+NOPROTO). Because this routine is probably
unused already, this won't be a problem in practice. If it turns out to
be a problem, we'll just restore this functionality.
Reviewed by: rdivacky, kib
flags appropriately. The next step is to make it raise a SIGFPE if
any exceptions are unmasked.
Thanks to remko for access to a sparc64 box for testing.
