Ever since gtaskqueue_drain() was added to iflib_stop(), a kernel panic
occurs when the ice(4) driver is in recovery mode. Queues are not
initialized in this mode, so gt_taskqueue is not initialized, and
gtaskqueue_drain() will panic.
Fix this by only doing a drain if an RX queue's gt_taskqueue is
initialized.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: erj@
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D37892
This updated DDP is intended to be used with the forthcoming ice(4)
driver update to 1.37.7-k. (But it will still work with the current
version.)
Co-authored-by: Piotr Kubaj <pkubaj@FreeBSD.org>
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
MFC after: 1 week
Sponsored by: Intel Corporation
As part of the effort to hide the internals of the ifnet struct, convert
the DEBUGNET_SET() macro to use an accessor instead of directly touching
the methods member.
Reviewed by: glebius (older version)
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D38105
Hide the ifnet structure definition, no user serviceable parts inside,
it's a netstack implementation detail. Include it temporarily in
<net/if_var.h> until all drivers are updated to use the accessors
exclusively.
Reviewed by: glebius
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D38046
Some drivers, like iflib drivers, take a 'context' argument instead of a
ifnet argument, as a single interface may have multiple contexts.
Follow this scheme by passing the context argument down. Most drivers
will likely pass 'ifp' as the context.
Reviewed by: glebius
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D38102
Overview:
Intel(R) QuickAssist Technology (Intel(R) QAT) provides hardware
acceleration for offloading security, authentication and compression
services from the CPU, thus significantly increasing the performance and
efficiency of standard platform solutions.
This commit introduces:
- Intel® 4xxx Series platform support.
- QuickAssist kernel API implementation update for Generation 4 device.
Enabled services: symmetric cryptography and data compression.
- Increased default number of crypto instances in static configuration
for performance purposes.
OCF backend changes:
- changed GCM/CCM MAC validation policy to generate MAC by HW
and validate by SW due to the QAT HW limitations.
Patch co-authored by: Krzysztof Zdziarski <krzysztofx.zdziarski@intel.com>
Patch co-authored by: Michal Jaraczewski <michalx.jaraczewski@intel.com>
Patch co-authored by: Michal Gulbicki <michalx.gulbicki@intel.com>
Patch co-authored by: Julian Grajkowski <julianx.grajkowski@intel.com>
Patch co-authored by: Piotr Kasierski <piotrx.kasierski@intel.com>
Patch co-authored by: Adam Czupryna <adamx.czupryna@intel.com>
Patch co-authored by: Konrad Zelazny <konradx.zelazny@intel.com>
Patch co-authored by: Katarzyna Rucinska <katarzynax.kargol@intel.com>
Patch co-authored by: Lukasz Kolodzinski <lukaszx.kolodzinski@intel.com>
Patch co-authored by: Zbigniew Jedlinski <zbigniewx.jedlinski@intel.com>
Sponsored by: Intel Corporation
Reviewed by: markj, jhb
Differential Revision: https://reviews.freebsd.org/D36254
Using '%r0' in efunc causes it to parse %r as a 'r' specifier.
This diff just adds a '%' in front of '%r0' in order to create the
correct output.
Reviewed by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D38176
Arguments follow primaries, not the other way around.
MFC after: 1 week
Sponsored by: Klara, Inc.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D38173
When dtrace starts, it tries to detect if the dtrace klds are loaded,
and if not, it loads them by loading the dtraceall kld. This module
depends on most dtrace modules, including systrace for the native
freebsd and freebsd32 ABIs. However, it does not depend on the
systrace_linux klds, as they in turn depend on the linux ABI klds, and
we don't want to load an ABI module that the user has not explicitly
requested. This can leave a naive user in a state where they think all
syscall providers have been loaded, yet linux ABI syscalls are
"invisible" to dtrace.
To fix this, check to see if the linux ABI modules are loaded. If they
are, then load their systrace klds.
Reviewed by: markj, (emaste & jhb, earlier versions)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D37986
Only 64bit architectures can be supported this way, because libcxx
defines __cxx_contention_t to be int64_t for FreeBSD, and 32bit arches
do not have a kind of UMTX_OP_WAIT_INT64_PRIVATE operation.
LLVM review: https://reviews.llvm.org/D142134
Tested by: emaste
Reviewed by: dim, emaste, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D38132
.git-blame-ignore-revs lists commit hashes that should be skipped by
`git blame` e.g. non-functional whitespace or style cleanup.
The file is populated with a few sample entries.
Reviewed by: brooks, imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D36525
fixup ignore revs
Right now we have little visibility into packet drops within netmap.
Start trying to make packet loss issues more visible by counting queue
drops in the transmit path, and in the input path for interfaces running
in emulated mode, where we place received packets in a bounded software
queue that is processed by rxsync.
Reviewed by: vmaffione
MFC after: 1 week
Sponsored by: Zenarmor
Sponsored by: OPNsense
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D38064
The check is ok by default, since the default value of
netmap_generic_ringsize is 1024. But we should check against the
configured "ring" size.
Reviewed by: vmaffione
MFC after: 1 week
Sponsored by: Zenarmor
Sponsored by: OPNsense
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D38062
Per the removed comments these fields should be loaded only once, since
they can in principle be modified concurrently, though this would be a
violation of the userspace contract with netmap.
No functional change intended.
Reviewed by: vmaffione
MFC after: 1 week
Sponsored by: Zenarmor
Sponsored by: OPNsense
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D38061
The code paths while dumping do not got through busdma. As such,
safeguard against calling bus_dmamap_sync() with a NULL map. The x86
implementation tolerates this but others do not, resulting in a
NULL dereference panic when dumping to a vtblk device on arm64, riscv,
etc.
Fixes: 782105f7c8 ("vtblk: Use busdma")
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D37990
This conditionally gives all registered shutdown handlers a chance to
perform the reboot, with cpu_reset() being the fallback. The '\s'
modifier can be used with the command to get the previous behaviour.
The motivation is that some platforms may not be able do anything
meaningful via cpu_reset(), due to a lack of standardized reset
mechanism and/or firmware shortcomings. However, they may have a
separate device driver attached that normally performs the reboot. Such
is the case for some versions of the Raspberry Pi, where reset via PSCI
fails, but the BCM2835 watchdog driver has a shutdown hook.
Reported by: bz
Reviewed by: markj (slightly earlier version)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D37981
Currently shutdown_reset() is registered as the final entry of the
shutdown_final event handler. However, if a panic occurs early in boot
before the event is registered (SI_SUB_INTRINSIC), we may end up
spinning in the subsequent infinite for loop and failing to reset
altogether. Instead we can simply call this function unconditionally.
Reviewed by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D37981
This will allow user-space programs (e.g. lsof) to locate deleted files
whose nlink equals zero. Prior to this commit, programs has to use
stat(kf_path) to get nlink, but that will fail if the file is deleted.
[mjg: s/fail/file in the commit message]
Reviewed by: mjg
Differential Revision: https://reviews.freebsd.org/D38169
The growfs_fstab script will add a new swap partition as a dump
device as well, but only if dumpdev is set to AUTO.
MFC after: 3 days
Reviewed by: pauamma
Differential Revision: https://reviews.freebsd.org/D38166
Currently, under the conditions specified below, IPv6 ingress packet
processing can ignore blackhole/reject flag on the prefix. The packet
will instead be looped locally till TTL expiration and a single ICMPv6
unreachable message will be send to the source even in case of
RTF_BLACKHOLE.
The following conditions needs hold to make the scenario happen:
* IPv6 forwarding is enabled
* Packet is not fast-forwarded
* Destination prefix has either RTF_BLACKHOLE or RTF_REJECT flag
Fix this behavior by checking for the blackhole/reject flags in
ip6_forward().
Reported by: Dmitriy Smirnov <fox@sage.su>
Reviewed by: ae
Differential Revision: https://reviews.freebsd.org/D38164
MFC after: 3 days
Return different exit code depending on which failure was encountered.
The pfsync test expect a very particular failure, not just any.
MFC after: 1 week
Sponsored by: InnoGames GmbH
Differential Revision: https://reviews.freebsd.org/D38123
Multiple improvements to pft_ping.py:
* Automatically use IPv6 when IPv6 addresses are used, --ip6 is not needed.
* Building of ping requests and parsing of ping replies is done layer by
layer. This way most arguments are available both for IPv6 and IPv4,
for ICMP and TCP.
* Use argument groups for improved readability.
* Change ToS and TTL argument name to TC and HL to reflect the modern
IPv6 nomenclature. The argument still set related IPv4 header fields
properly.
* Instead of sniffing for the very specific case of duplicated packets,
allow for sniffing on multiple interfaces.
* Report which sniffer has failed by setting bits of error code.
* Raise meaningful exceptions when irrecoverable errors happen.
* Make IPv4 fragmentation flags configurable.
* Make IPv6 HL / IPv4 TTL configurable.
* Make TCP MSS configurable.
* Make TCP sequence number configurable.
* Make ICMP payload size configurable.
* Add debug output.
* Move command line argument parsing out of network functions.
* Make the code somehow PEP-8 compliant.
MFC after: 1 week
Sponsored by: InnoGames GmbH
Differential Revision: https://reviews.freebsd.org/D38122
Multiple improvements to sniffer.py:
* Remove ambiguity of configuring recvif, it must be now explicitly specified.
* Don't catch exceptions around creating the sniffer, let it properly
fail and display the whole stack trace.
* Count correct packets so that duplicates can be found.
MFC after: 1 week
Sponsored by: InnoGames GmbH
Differential Revision: https://reviews.freebsd.org/D38120
Remove the platform-specific definitions of VM_BATCHQUEUE_SIZE
for amd64 and powerpc64, and instead treat all 64-bit platforms
identically. This has the effect of increasing the arm64
and riscv VM_BATCHQUEUE_SIZE to match that of other platforms.
Reviewed by: jhb, markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D37707
Some existing applications setup Netlink socket with
SOCK_DGRAM instead of SOCK_RAW. Update the manpage to clarify
that the default way of creating the socket should be with
SOCK_RAW. Update the code to support both SOCK_RAW and SOCK_DGRAM.
Reviewed By: pauamma
Differential Revision: https://reviews.freebsd.org/D38075
EF_ARM_EABI_VERSION_UNKNOWN was used when we could run either eabi or
oabi. That was armv[45] only, and went away when we migrated to eabi
many major releases ago. No standard defines this symbol, so retire it.
Pointed out by: jrtc27
Sponsored by: Netflix
Add in the zones for my MacbookAir6,2, a 2013 Macbook Air.
Tested - said Macbook Air 2013. Thermal Zones and keyboard backlight
control works fine.
Differential Revision: https://reviews.freebsd.org/D38073
Approved by: jrtc27