The program will be installed as bintrans, uuencode, uudecode,
b64encode, and b64decode and will be responsible for running the coders
according to their historical behavior.
Additionally, bintrans will be able to take a parameter designating
the coder and accept all its options in this form:
bintrans <coder> [options]
and the behavior should be the same as if
<coder> [options]
was invoked.
This has the advantage that adding coders won't require installing them
as binaries.
Move uudecode files to uuencode since the latter is the one that
provides the manual page.
Reviewed by: delphij (previous version)
Differential Revision: https://reviews.freebsd.org/D32943
This update fixes an issue in input line editing: when going left to
the start of the line, the cursor would jump to the end of the line
instead.
Merge commit 'bc75dcc4ce682562390fa32e7cd63c08160e21b9'
The "void *stuff" (also called fstuff and dstuff) argument
was used by the Mac OSX port. For FreeBSD, this argument
is always NULL, so remove it to clean up the code.
This commit gets rid of "stuff" for assorted functions
local to nfs_clrpcops.c.
Future commits will do the same for other functions.
When constructing qpair, use the controller's notion of page size rather
than the host's PAGE_SIZE. Currently, these are both 4k, but the arm 16k
page size support requires decoupling.
There's a "hidden" PAGE_SIZE in btoc, so we must change btoc(x) to
howmany(x, ctrlr->page_size) to properly count the number of pages (in
the drive's world view) are needed for various calculations.
With these changes, we the nvme driver operates at production level load
for both host 4k and host 16k page size.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D34873
Host Memory Buffer units are a mix. For those in the identify structure,
the size is in 4kiB chunks. For specifying the buffer description,
though, they are in terms of the drive's MPS. Add comments to this
effect and change PAGE_SIZE to ctrlr->page_size where needed, as well as
correct a mistaken use of NVME_HPS_UNITS in 214df80a9c as pointed out
by rpokala@ after the commit. No functional change is intended, as
page_size is still 4k which matches all current hosts' PAGE_SIZE, but to
support 16k pages on arm, we need to differentiate these two cases.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D34871
NVME_MAX_XFER_SIZE used to be a constant (back when MAXPHYS was a
constant) to denote the smaller of MAXPHYS or the largest PRP we could
encode with our prealloation scheme. However, it's no longer constant
since MAXPHYS varies at runtime. In addition, the actual maximum is now
based on the drive's currently in use page_size, which is also a runtime
expression. As such, remove the define and expand it inline in the one
place its used still in the tree.
Sponsored by: Netflix
Reviewed by: chuck
Differential Revision: https://reviews.freebsd.org/D34870
Make sure we set the MPS we cached (currently the drives minimum mps) in
CC (Controller Configuration) when reinitializing the drive. It must
match the page_size that we're going to use. Also retire less specific
NVME_PAGE_SHIFT since it's now unused.
Sponsored by: Netflix
Reviewed by: chuck
Differential Revision: https://reviews.freebsd.org/D34869
The Memory Page Size sets the basic unit of operation for the drive. We
currently set this to the drive's minimum page size, but we could set it
to any page size the drive supports in the future. Replace min_page_size
(it's now unused for that purpose) with page_size to reflect this and
cache the MPS we want to use. Use NVME_MPS_SHIFT to compute page_size.
Sponsored by: Netflix
Reviewed by: chuck
Differential Revision: https://reviews.freebsd.org/D34868
Calculate the maxmimum transfer size based on the MPSMIN we have in our
cached copy of cap_hi rather than using min_page_size in the controller.
Sponsored by: Netflix
Reviewed by: chuck
Differential Revision: https://reviews.freebsd.org/D34867
The intel raid stripe alignment parameter is based on CAP.MPSMIN, so use
that directly now that we have it available.
Sponsored by: Netflix
Reviewed by: chuck
Differential Revision: https://reviews.freebsd.org/D34866
The memory page size (MPS) is expressed in terms of a 2^(number + 12)
and other items in the system inherit this. Create a define rather than
sprinkling 12 everywehere.
Sponsored by: Netflix
Reviewed by: chuck
Differential Revision: https://reviews.freebsd.org/D34865
Formerly fusefs would pass up the stack any error value returned by the
fuse server. However, some values aren't valid for userland, but have
special meanings within the kernel. One of these, EJUSTRETURN, could
cause a kernel page fault if the server returned it in response to
FUSE_LOOKUP. Fix by validating all errors returned by the server.
Also, fix a data lifetime bug in the FUSE_DESTROY test.
PR: 263220
Reported by: Robert Morris <rtm@lcs.mit.edu>
MFC after: 3 weeks
Sponsored by: Axcient
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D34931
Since the first unattributed commit in 1981, lpr has attempted to
prevent users from printing executables (and in earlier versions
archives). Archive detection was lost in 1992 when lpr gained a
dependency on a.out.h. No corresponding support was added for ELF files
with the full transiation to ELF in 1998, but a.out support has been
dragged forward to and contaminated platforms that never supported
a.out.
While this feature isn't unuseful, preventing the printing of
a single file format we stopped producing ~20 years ago isn't worth
the costs (however minimal).
Reviewed by: gad, imp, emaste
Differential Revision: https://reviews.freebsd.org/D34901
Initially we were using the IEs from ieee80211_probereq_ie() of net80211
and put them into the common_ies field. Start by manually building the
per-band and common IE parts as drivers put them back together.
This also involves allocating the req.ie as one buffer for all IEs over
all bands and setting req.ie_len correctly based on how many bytes we
put in.
Manually building per-band scan IEs we still use the net80211 routines
to add IEs to the buffer (mostly).
This is needed by Realtek drivers but will equally used by others.
Realtek would simply panic due to skbs being allocated with the wrong
length.
Longer-term this will help us, e.g., when not supporting VHT on 2Ghz
and we would have to do this anyway.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Use an sx lock to protect the list of vifs. We could use the
linux mutex compat for this but our current implementation may
re-acquire the lock recursively so allow this. The change is
mainly motivated by the fact that some callers may sleep in the
interator function called. Recursiveness is needed because we
see find_sta_by_ifaddr() being called from an iterator function
from iterate_interfaces().
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Start adding rate control feedback in ieee80211_tx_status() in order
for net80211 to be able to report something back (which may not
yet be the view of the firmware). iwlwifi is reporting back an MSC 0
even with HT disabled (to be investigated) so we cannot (yet) use
the firmware/driver rate feedback directly.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Implement skb_copy() with omissions of fragments and possibly other fields
for now. Should we hit frags at any point a log message will let us know.
For the few cases we need this currently this is enough.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
While it is currently unclear if we will have to defer work in
dev_kfree_skb_irq() to call dev_kfree_skb().
We only have one caller which seems to be fine on FreeBSD by calling
it directly for now.
While here shortcut skb_put()/skb_put_data() saving us work if there
are no adjustments to do.
Also adjust the logging in skb_is_gso() to avoid getting spammed by it.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
This code was marked gone_in(14), so it can now be removed.
The only consumer of this interface is dumpon(8). We do not maintain
strict backwards compatibility for this utility because a) it
can't/shouldn't be used from a jail or chroot and b) it is highly
specific interface unique to FreeBSD. The host's (presumably more
up-to-date) copy of dumpon(8) should be used to configure kernel dump
devices.
Reviewed by: markj, emaste
MFC after: never
Differential Revision: https://reviews.freebsd.org/D34914
This code was marked gone_in(13), so its time has passed.
The only consumer of this interface is dumpon(8). We do not maintain
strict backwards compatibility for this utility because a) it
can't/shouldn't be used from a jail or chroot and b) it is highly
specific interface unique to FreeBSD. The host's (presumably more
up-to-date) copy of dumpon(8) should be used to configure kernel dump
devices.
Reviewed by: markj, emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D34913
upstream: clear io_want/io_ready flags at start of poll() cycle;
avoids plausible spin during rekeying if channel io_want flags are reused
across cycles. ok markus@ deraadt@
From upstream release notes https://www.openssh.com/txt/release-9.0
This release switches scp(1) from using the legacy scp/rcp protocol
to using the SFTP protocol by default.
Legacy scp/rcp performs wildcard expansion of remote filenames (e.g.
"scp host:* .") through the remote shell. This has the side effect of
requiring double quoting of shell meta-characters in file names
included on scp(1) command-lines, otherwise they could be interpreted
as shell commands on the remote side.
This creates one area of potential incompatibility: scp(1) when using
the SFTP protocol no longer requires this finicky and brittle quoting,
and attempts to use it may cause transfers to fail. We consider the
removal of the need for double-quoting shell characters in file names
to be a benefit and do not intend to introduce bug-compatibility for
legacy scp/rcp in scp(1) when using the SFTP protocol.
Another area of potential incompatibility relates to the use of remote
paths relative to other user's home directories, for example -
"scp host:~user/file /tmp". The SFTP protocol has no native way to
expand a ~user path. However, sftp-server(8) in OpenSSH 8.7 and later
support a protocol extension "expand-path@openssh.com" to support
this.
In case of incompatibility, the scp(1) client may be instructed to use
the legacy scp/rcp using the -O flag.
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Release notes are available at https://www.openssh.com/txt/release-9.0
Some highlights:
* ssh(1), sshd(8): use the hybrid Streamlined NTRU Prime + x25519 key
exchange method by default ("sntrup761x25519-sha512@openssh.com").
The NTRU algorithm is believed to resist attacks enabled by future
quantum computers and is paired with the X25519 ECDH key exchange
(the previous default) as a backstop against any weaknesses in
NTRU Prime that may be discovered in the future. The combination
ensures that the hybrid exchange offers at least as good security
as the status quo.
* sftp-server(8): support the "copy-data" extension to allow server-
side copying of files/data, following the design in
draft-ietf-secsh-filexfer-extensions-00. bz2948
* sftp(1): add a "cp" command to allow the sftp client to perform
server-side file copies.
This commit excludes the scp(1) change to use the SFTP protocol by
default; that change will immediately follow.
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Make sysdecode.h self-contained rather than forcing all consumers to
include dependencies. No functional change intended.
Reviewed by: pauamma_gundo.com, jhb, emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34899
diff3 with the -e (ed script flag) can generate line deletions, add
support for deletions and add a test case to exercise this behaviour.
This functionality was unearthed through comparison of bsd diff3 and gnu
diff3 output.
Reviewed by: pstef
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D34912
Now, since O_PATH-opened file descriptors use use references instead
of the hold references, vrefact() chahges from that revision can be
reverted.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D34906
The "void *stuff" (also called fstuff and dstuff) argument
was used by the Mac OSX port. For FreeBSD, this argument
is always NULL, so remove it to clean up the code.
This commit gets rid of "stuff" for nfscl_nget().
Future commits will do the same for other functions.
Queue "roundrobin" in a COP rule means the driver should select queues
for new tids in a round-robin manner.
Reviewed by: jhb@
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D34922
A COP (Connection Offload Policy) rule can now specify that the tx
and/or rx queue for a new tid should be selected in a round-robin
manner. There is no change in default behavior.
Reviewed by: jhb@
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D34921
The driver queries the firmware to find out if it supports this feature
and enables it if it does. The firmware moves the iSCSI page pod region
to a lower address so that some of it is located in the faster on-chip
memory instead of external DDR.
Reviewed by: jhb@
MFC after: 3 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D34895
This commit will add a new concept to rack, tracepoints. A tracepoint
is a defined point inserted into the code (3 are included in this initial patch) that
allows a developer to insert a point that might be of interest. The developer numbers
the point in the tcp_rack.h file and then can use sysctl to enable that (or all) trace
points. A limit is also given to how many BB logged connections will turn on
so that a box is not overrun by BB logging.
Reviewed by: tuexen
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D34898
HPTS timing begins to go off when we reach the threshold of connections (1200 by default)
where we have any returning syscall or LRO stop finding the oldest hpts thread that
has not run but instead using the CPU it is on. This ends up causing quite a lot of times
where hpts threads may not run for extended periods of time. On top of all that which
causes heartburn if you are pacing in tcp, you also have the fact that where AMD's
podded L3 cache may have sets of 8 CPU's that share a L3, hpts is unaware of this
and thus on amd you can generate a lot of cache misses.
So to fix this we will get rid of the CPU mode, and always use oldest. But also make
HPTS aware of the CPU topology and keep the "oldest" to be within the same L3 cache.
This also works nicely for NUMA as well couple with Drew's earlier NUMA changes.
Reviewed by: glebius, gallatin, tuexen
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D34916
The wait flag is passed to UMA when allocating boundary tags for the
initial span, and UMA expects either M_WAITOK or M_NOWAIT to be present.
Reported by: cperciva
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The assertion was added in commit 1771e987ca. After that, vm_wait()
and friends were refactored such that the actual sleep happens
elsewhere. Now the assertion condition is not checked when
vm_wait_doms() is called directly, and it is checked even if we are not
going to sleep (because vm_page_count_min_set(wdoms) is false).
Reviewed by: alc, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34909
