Commit Graph

264 Commits

Author SHA1 Message Date
Andrew Gallatin
0483b1a8f2 Enable polling to be configured into kernels on non i386 platforms. Note that
poll_in_trap is only implemented on i386.  I've tested this on alpha.

Approved by: luigi
2002-02-12 00:26:06 +00:00
Thomas Moestl
c93d0240c3 Move the PCI_ENABLE_IO_MODES option from conf/options.i386 to
conf/options.
2001-12-21 21:46:55 +00:00
Luigi Rizzo
e4fc250c15 Device Polling code for -current.
Non-SMP, i386-only, no polling in the idle loop at the moment.

To use this code you must compile a kernel with

        options DEVICE_POLLING

and at runtime enable polling with

        sysctl kern.polling.enable=1

The percentage of CPU reserved to userland can be set with

        sysctl kern.polling.user_frac=NN (default is 50)

while the remainder is used by polling device drivers and netisr's.
These are the only two variables that you should need to touch. There
are a few more parameters in kern.polling but the default values
are adequate for all purposes. See the code in kern_poll.c for
more details on them.

Polling in the idle loop will be implemented shortly by introducing
a kernel thread which does the job. Until then, the amount of CPU
dedicated to polling will never exceed (100-user_frac).
The equivalent (actually, better) code for -stable is at

	http://info.iet.unipi.it/~luigi/polling/

and also supports polling in the idle loop.

NOTE to Alpha developers:
There is really nothing in this code that is i386-specific.
If you move the 2 lines supporting the new option from
sys/conf/{files,options}.i386 to sys/conf/{files,options} I am
pretty sure that this should work on the Alpha as well, just that
I do not have a suitable test box to try it. If someone feels like
trying it, I would appreciate it.

NOTE to other developers:
sure some things could be done better, and as always I am open to
constructive criticism, which a few of you have already given and
I greatly appreciated.
However, before proposing radical architectural changes, please
take some time to possibly try out this code, or at the very least
read the comments in kern_poll.c, especially re. the reason why I
am using a soft netisr and cannot (I believe) replace it with a
simple timeout.

Quick description of files touched by this commit:

sys/conf/files.i386
        new file kern/kern_poll.c
sys/conf/options.i386
        new option
sys/i386/i386/trap.c
        poll in trap (disabled by default)
sys/kern/kern_clock.c
        initialization and hardclock hooks.
sys/kern/kern_intr.c
        minor swi_net changes
sys/kern/kern_poll.c
        the bulk of the code.
sys/net/if.h
        new flag
sys/net/if_var.h
        declaration for functions used in device drivers.
sys/net/netisr.h
        NETISR_POLL
sys/dev/fxp/if_fxp.c
sys/dev/fxp/if_fxpvar.h
sys/pci/if_dc.c
sys/pci/if_dcreg.h
sys/pci/if_sis.c
sys/pci/if_sisreg.h
        device driver modifications
2001-12-14 17:56:12 +00:00
Poul-Henning Kamp
e1a7c5c881 GC userconfig after Peter axed it 15 months ago. 2001-11-05 21:46:35 +00:00
Jonathan Lemon
ae4da68827 Add PCI_ENABLE_IO_MODES option, for BIOSen that neglect this.
Submitted by: Andrew R. Reiter arr@watson.org
2001-10-25 04:44:50 +00:00
Hellmuth Michaelis
12428dfd1b Add a driver for the Compaq Microcom 610 ISDN (Compaq series PSB2222I) ISA PnP
card.

Submitted by:	Steve Looman
Reviewed by:	hm
MFC after:	1 month
2001-10-21 09:17:25 +00:00
Maxim Sobolev
78f45204d9 Introduce new syscons(4) kernel options:
- SC_CUT_SPACES2TABS - when copying text into the cut buffer convert leading
  spaces into the tabs;
- SC_CUT_SEPCHARS="XYZ" - treat supplied characters as possible words
  separators when the driver searches for words boundaries when doing cut
  operation.

Also unify cut code a bit to decrease amount of duplicated code. This fixes
line cut mode, so that it is no longer pads line with useless spaces.

Approved by:	ru
2001-09-21 20:41:24 +00:00
Peter Wemm
f83fbaf22d Introduce a new option, KVA_SPACE, which can be used to reconfigure
the size of the kernel virtual address space relatively painlessly.
Userland will adapt via the exported kernbase symbol.  Increasing
this causes the user part of address space to reduce.
2001-09-21 06:23:03 +00:00
Julian Elischer
b40ce4165d KSE Milestone 2
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00
Søren Schmidt
bdf4f9d798 There is no option IDE_DELAY and havn't been for a long time.. 2001-09-04 15:50:46 +00:00
Takeshi Shibagaki
5f5e1ff3b1 Always turned on 8bit access card support for the fe driver
both i386/pc98, so options FE_8BIT_SUPPORT was deleted.

Reviewed by: nyan
2001-09-02 13:05:00 +00:00
Peter Wemm
268bdb43f9 Optionize UPAGES for the i386. As part of this I split some of the low
level implementation stuff out of machine/globaldata.h to avoid exposing
UPAGES to lots more places.  The end result is that we can double
the kernel stack size with 'options UPAGES=4' etc.

This is mainly being done for the benefit of a MFC to RELENG_4 at some
point.  -current doesn't really need this so much since each interrupt
runs on its own kstack.
2001-08-25 02:20:02 +00:00
Peter Wemm
b2c17e333e Add a cosmetic comment. 2001-08-02 23:54:23 +00:00
Kazutaka YOKOTA
2fe5e0b184 Use #ifdef DEV_SPLASH (from opt_splash.h) rather than
#if NSPLASH > 0 (from splash.h) to test the presence
of the splash driver.
2001-08-02 13:22:33 +00:00
Peter Wemm
9d146ac5d1 Activate SSE/SIMD. This is the extra context switching support that
we are required to do if we let user processes use the extra 128 bit
registers etc.

This is the base part of the diff I got from:
  http://www.issei.org/issei/FreeBSD/sse.html
I believe this is by:  Mr. SUZUKI Issei <issei@issei.org>
SMP support apparently by: Takekazu KATO <kato@chino.it.okayama-u.ac.jp>
Test code by: NAKAMURA Kazushi <kaz@kobe1995.net>, see
  http://kobe1995.net/~kaz/FreeBSD/SSE.en.html

I have fixed a couple of style(9) deviations.  I have some followup
commits to fix a couple of non-style things.
2001-07-12 06:32:51 +00:00
Peter Wemm
2398f0cd1d Hints overhaul:
- Replace some very poorly thought out API hacks that should have been
  fixed a long while ago.
- Provide some much more flexible search functions (resource_find_*())
- Use strings for storage instead of an outgrowth of the rather
  inconvenient temporary ioconf table from config().  We already had a
  fallback to using strings before malloc/vm was running anyway.
2001-06-12 09:40:04 +00:00
Boris Popov
de847dd07c All NETSMB* options should use opt_netsmb.h file (the joy of multiple repos). 2001-04-13 10:53:56 +00:00
Boris Popov
681a5bbef2 Import kernel part of SMB/CIFS requester.
Add smbfs(CIFS) filesystem.

Userland part will be in the ports tree for a while.

Obtained from:	smbfs-1.3.7-dev package.
2001-04-10 07:59:06 +00:00
Peter Wemm
f1532aadee Activate USER_LDT by default. The new thread libraries are going to
depend on this.  The linux ABI emulator tries to use it for some linux
binaries too.  VM86 had a bigger cost than this and it was made default
a while ago.

Reviewed by:	jhb, imp
2001-02-23 01:25:02 +00:00
Peter Wemm
52a90b77f9 change 'count eisa' to 'optional eisa' and update the only consumer
of 'NEISA' - userconfig.c.
While there, send some defunct code to the file history.
2001-01-29 08:19:02 +00:00
Hellmuth Michaelis
4a29e8f92b Add experimental support for Eicon.Diehl DIVA 2.0 and 2.02 ISA PnP cards. 2001-01-26 13:22:18 +00:00
Peter Wemm
1467a651ab Convert apm from a bogus 'count' into a plain option. Clean out some
other cruft from the files.alpha and files.ia64 that were related to this.
2001-01-19 14:09:54 +00:00
Peter Wemm
558226eae7 Use #ifdef DEV_NPX from opt_npx.h instead of #if NNPX > 0 from npx.h 2001-01-19 13:19:02 +00:00
Takanori Watanabe
bffb191efe Add PECOFF (WIN32 Execution file format) support.
To use it, some dll is needed. And currently, the dll is only for NetBSD.
So one more kernel module is needed.
For more infomation,
http://chiharu.haun.org/peace/ .

Reviewed by:	bp
2000-12-20 12:51:08 +00:00
Hellmuth Michaelis
925be47cdb update to i4b version 0.95.04 2000-10-09 13:41:07 +00:00
Paul Saab
7321545f26 Remove the NCPU, NAPIC, NBUS, NINTR config options. Make NAPIC,
NBUS, NINTR dynamic and set NCPU to a maximum of 16 under SMP.

Reviewed by:	peter
2000-09-22 23:40:10 +00:00
KATO Takenori
65cbb03cfe Added new options CPU_PPRO2CELERON and CPU_L2_LATENCY to support
Socket 8 to 370 converters.  When (1) CPU_PPRO2CELERON option is
defined, (2) Intel CPU is found and (3) CPU ID is 0x66?, L2 cache is
enabled through MSR 0x11e.  The L2 cache latency value can be
specified by CPU_L2_LATENCY option.  Default value of L2 cache latency
is 5.

These options are useful if you use Socket 8 to Socket 370 converter
(e.g. Power Leap's PL-Pro/II.)  Most PentiumPro BIOSs don't enable L2
cache of Mendocino Celeron CPUs because they don't know Celeron CPUs.
These options are needles if you use a Coppermine (FCPGA) Celeron or
PentiumIII, becuase the L2 cache enable bit is hard wired and L2 cache
is always enabled.
2000-06-13 09:10:37 +00:00
Peter Wemm
0d74cc4841 Add option BROKEN_KEYBOARD_RESET to an opt_*.h file 2000-06-10 02:05:57 +00:00
John Baldwin
f548daf09f Move UKBD_DFLT_KEYMAP into the options file since USB is machine
independent.  This allows the ukbd0 driver to compile on the Alpha.

Approved by:	o`brien (in principle)
2000-05-09 18:23:38 +00:00
Mike Smith
300451c472 Some more i386-only BIOS-friendliness:
- Add support for using the PCI BIOS functions for configuration space
   accesses, and make this the default.

 - Make PNPBIOS the default (obsoletes the PNPBIOS config option).

 - Add two new boot-time tunables to disable each of the above.
2000-04-16 20:48:33 +00:00
Hellmuth Michaelis
aae85521f6 Remove useless PCVT_FREEBSD and PCVT_EMU_MOUSE. Add PCVT_GREENSAVER. 2000-03-31 09:02:39 +00:00
Peter Wemm
80060e8897 Connect the ISA and PCI compatability shims to an option. In this case
it's options COMPAT_OLDISA and COMPAT_OLDPCI.  This is meant to be a
fairly strong incentive to update the older drivers to newbus, but doesn't
(quite) leave anybody hanging with no hardware support.  I was talking with
a few folks and I was encouraged to simply break or disable the shims but
that was a bit too drastic for my liking.
2000-03-19 13:07:12 +00:00
Nicolas Souchu
0f210c922b Port of ppbus standalone framework to the newbus system.
Note1: the correct interrupt level is invoked correctly for each driver.
       For this purpose, drivers request the bus before being able to
       call BUS_SETUP_INTR and BUS_TEARDOWN_INTR call is forced by the ppbus
       core when drivers release it. Thus, when BUS_SETUP_INTR is called
       at ppbus driver level, ppbus checks that the caller owns the
       bus and stores the interrupt handler cookie (in order to unregister
       it later).

       Printing is impossible while plip link is up is still TRUE.
       vpo (ZIP driver) and lpt are make in such a way that
       using the ZIP and printing concurrently is permitted is also TRUE.

Note2: specific chipset detection is not done by default. PPC_PROBE_CHIPSET
       is now needed to force chipset detection. If set, the flags 0x40
       still avoid detection at boot.

Port of the pcf(4) driver to the newbus system (was previously directly
connected to the rootbus and attached by a bogus pcf_isa_probe function).
2000-01-14 00:18:06 +00:00
Bruce Evans
4100386cb1 Put COMPAT_SVR4 in opt_dontuse.h for the same reasons as IBCS2 and
COMPAT_LINUX are there.  It shouldn't be and isn't used after config
time, except to complicate the svr4 module makefile.

Moved options for emulators to a separate section.
2000-01-09 10:58:39 +00:00
Kazutaka YOKOTA
273157da59 - Add the device resume method. It supercedes the existing resume
routine which hooks the apm driver.
- Rename the PSM_HOOKAPM option to PSM_HOOKRESUME.
- Delete unnecessary #include.
1999-12-15 10:04:05 +00:00
Hellmuth Michaelis
e5981bd1fd update to isdn4bsd beta release 0.90
drivers which are likely to be ported to newbus are commented out for now
1999-12-14 20:52:41 +00:00
Mark Newton
09e5e156c4 Add support for compiling SVR4 as a static module
("AND THE CROWD GOES... uh.")

Tested by:	Joerg Wunsch <joerg_wunsch@interface-business.de>
1999-12-08 12:13:13 +00:00
Kazutaka YOKOTA
d7ccb880d1 - Added the following options; they have existed in syscons
for sometime, but haven't been registered here.

  SC_NORM_ATTR
  SC_NORM_REV_ATTR
  SC_KERNEL_CONS_ATTR
  SC_KERNEL_CONS_REV_ATTR

PR: kern/13176
1999-11-08 10:59:48 +00:00
Kazutaka YOKOTA
51ebcb230e - Added a new kernel configuration option: SC_TWOBUTTON_MOUSE.
The new option will make the right mouse button the `paste' button.
  Useful for two button mice.

Submitted by: morganw@engr.sc.edu (Wes Morgan)
1999-11-08 10:04:29 +00:00
Kazutaka YOKOTA
73027df75c - Removed SC_VIDEO_DEBUG. It is broken and useless now. 1999-11-08 09:57:16 +00:00
Eivind Eklund
909232c4ef Options cleanup.
* GC unused options
* Move options that exist on all architectures to conf/options
* Add missing options to LINT
* Sort undocumented options list in LINT

Reviewed by:	green
1999-11-06 23:41:10 +00:00
Eivind Eklund
f1cdff804e Elminiate the (unused) TUNE_1542 option. 1999-11-01 22:50:52 +00:00
Doug Rabson
b719a13987 Add PNPBIOS option. 1999-10-14 21:25:36 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Peter Wemm
e8ebc7f504 The "LINUX" option isn't actually used or referenced anywhere. The stuff
that goes to opt_dontuse.h is so an opt_*.h file doesn't get created even
though an option may be used for bringing stuff in via files[.*].

Pointed out by: bde
1999-08-18 11:28:36 +00:00
Hellmuth Michaelis
0df6adec74 updating isdn4bsd to beta version 0.83 1999-08-06 14:05:10 +00:00
Kazutaka YOKOTA
6e8394b8ba The second phase of syscons reorganization.
- Split syscons source code into manageable chunks and reorganize
  some of complicated functions.

- Many static variables are moved to the softc structure.

- Added a new key function, PREV.  When this key is pressed, the vty
  immediately before the current vty will become foreground.  Analogue
  to PREV, which is usually assigned to the PrntScrn key.
  PR: kern/10113
  Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de>

- Modified the kernel console input function sccngetc() so that it
  handles function keys properly.

- Reorganized the screen update routine.

- VT switching code is reorganized.  It now should be slightly more
  robust than before.

- Added the DEVICE_RESUME function so that syscons no longer hooks the
  APM resume event directly.

- New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING,
  SC_NO_HISTORY and SC_NO_SYSMOUSE.
  Various parts of syscons can be omitted so that the kernel size is
  reduced.

  SC_PIXEL_MODE
  Made the VESA 800x600 mode an option, rather than a standard part of
  syscons.

  SC_DISABLE_DDBKEY
  Disables the `debug' key combination.

  SC_ALT_MOUSE_IMAGE
  Inverse the character cell at the mouse cursor position in the text
  console, rather than drawing an arrow on the screen.
  Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG)

  SC_DFLT_FONT
  makeoptions "SC_DFLT_FONT=_font_name_"
  Include the named font as the default font of syscons.  16-line,
  14-line and 8-line font data will be compiled in.  This option replaces
  the existing STD8X16FONT option, which loads 16-line font data only.

- The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c.

- The video driver provides a set of ioctl commands to manipulate the
  frame buffer.

- New kernel configuration option: VGA_WIDTH90
  Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60.  These
  modes are mot always supported by the video card.
  PR: i386/7510
  Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx.

- The header file machine/console.h is reorganized; its contents is now
  split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h
  (another new file).  machine/console.h is still maintained for
  compatibility reasons.

- Kernel console selection/installation routines are fixed and
  slightly rebumped so that it should now be possible to switch between
  the interanl kernel console (sc or vt) and a remote kernel console
  (sio) again, as it was in 2.x, 3.0 and 3.1.

- Screen savers and splash screen decoders
  Because of the header file reorganization described above, screen
  savers and splash screen decoders are slightly modified.  After this
  update, /sys/modules/syscons/saver.h is no longer necessary and is
  removed.
1999-06-22 14:14:06 +00:00
Dag-Erling Smørgrav
9b953cf681 Kill option FAILSAFE.
PR:		i386/12187
Approved by:	bde
1999-06-15 13:14:56 +00:00
Steve Price
2df9ad0bd7 The FD options are now in /sys/conf/options so need to duplicate them
here and keep people from building new kernels. :)
1999-06-06 22:45:04 +00:00
Jonathan Lemon
778359545e Make vm86 a standard component
Reviewed by:	silence on on -current
1999-06-01 18:18:39 +00:00
Hellmuth Michaelis
80037d6e9e upgrade isdn4bsd from version 0.71 to the just released version 0.81 1999-05-20 10:14:57 +00:00
Peter Wemm
6f42b336a5 Move opt_sio.h options to conf/options and activate in isa/sio.c 1999-05-09 13:10:49 +00:00
Peter Wemm
19477ba0b7 The fd options changed during new-bus. 1999-04-24 21:46:56 +00:00
Peter Wemm
3e3e4375c8 Shoot the LKM support in the old wd/wdc/atapi driver set in the head and
perform a cleanup/unifdef sweep over it to tidy things up.  The atapi
code is permanently attached to the wd driver and is always probed.

I will add an extra option bit in the flags to disable an atapi probe on
either the master or slave if needed, if people want this.

Remember, this driver is destined to die some time.  It's possible that
it will loose all atapi support down the track and only be used for
dumb non-ATA disks and all ata/atapi devices will be handled by the new
ata system.

ATAPI, ATAPI_STATIC and CMD640 are no longer options, all are implicit.

Previously discussed with:  sos
1999-04-13 19:38:12 +00:00
Joerg Wunsch
aae5936ed5 Make NDGBPORTS an official option. 1999-03-13 13:20:59 +00:00
Kazutaka YOKOTA
e9deda23ae Keyboard driver update in preparation for the USB keyboard driver.
- Refined internal interface in keyboard drivers so that:
  1. the side effect of device probe is kept minimal,
  2. polling mode function is added,
  3. and new ioctl and configuration options are added (see below).

- Added new ioctl: KDSETREPEAT
  Set keyboard typematic rate.  There has existed an ioctl command,
  KDSETRAD, for the same purpose.  However, KDSETRAD is dependent on
  the AT keyboard.  KDSETREPEAT provides more generic interface.
  KDSETRAD will still be supported in the atkbd driver.

- Added new configuration options:
  ATKBD_DFLT_KEYMAP
  Specify a keymap to be used as the default, built-in keymap.
  (There has been undocumented options, DKKEYMAP, UKKEYMAP, GRKEYMAP,
  SWKEYMAP, RUKEYMAP, ESKEYMAP, and ISKEYMAP to set the default keymap.
  These options are now gone for good.  The new option is more general.)

  KBD_DISABLE_KEYMAP_LOADING
  Don't allow the user to change the keymap.
1999-03-10 10:36:53 +00:00
Julian Elischer
fda82fc2b9 Submitted by: Larry Lile
Move the Olicom token ring driver to the officially sanctionned location of
/sys/contrib. Also fix some brokenness in the generic token ring support.

Be warned that if_dl.h has been changed and SOME programs might
like recompilation.
1999-03-10 10:11:43 +00:00
Poul-Henning Kamp
a2210fe12b Make TIMER_FREQ a normal, undocumented option. Raise confusion to
a higher level with example in LINT.

Clarify comment about PPS_SYNC.  Ignore for now that it doesn't
work in FLL mode, it will in a few days.
1999-03-09 20:20:09 +00:00
Hellmuth Michaelis
c02553cef2 add kernel config support for i4b driver for AVM Fritz PCI 1999-03-07 16:11:12 +00:00
KATO Takenori
c1aca4d070 Added FE_8BIT_SUPPORT into the list. The fe driver includes opt_fe.h.
Submitted by:	Takahashi Yoshihiro <nyan@dd.catv.ne.jp>
1999-03-03 10:40:27 +00:00
Kazutaka YOKOTA
c619f2ac1e - Remove reference to obsolete options.
- Describe options for the vga driver.
Reviewed by: bde
1999-01-23 10:51:58 +00:00
Kazutaka YOKOTA
2ad872c579 The first stage of console driver reorganization: activate new
keyboard and video card drivers.

Because of the changes, you are required to update your kernel
configuration file now!

The files in sys/dev/syscons are still i386-specific (but less so than
before), and won't compile for alpha and PC98 yet.

syscons still directly accesses the video card registers here and
there; this will be rectified in the later stages.
1999-01-11 03:18:56 +00:00
Nicolas Souchu
a6de7b79d9 Forgotten options needed to build last ppbus commit.
Submitted by: "D. Rock" <rock@wurzelausix.CS.Uni-SB.DE>
1999-01-10 17:41:33 +00:00
Peter Wemm
c19da41ebb Part 1 of pcvt/voxware revival. I hope I have not clobbered any other
deltas, but it is possible since I had a few merge conflicts over the last
few days while this has been sitting ready to go.

Approved by:	core
1999-01-01 08:09:58 +00:00
Mike Smith
925f368193 From the submitter:
CPU_WT_ALLOC does not work correctly for K6-2s of model 8+ and
probably K6-3s (when they appear on the market soon). In addition,
print_AMD_info() incorrectly printfs write allocation's size. I've
fixed them, so they now Do The Right Thing, and added a
"NO_MEMORY_HOLE" option to easily allow 15-16mb range handling for us
K6 and K6-2 users.

Submitted by:	Brian Feldman <green@unixhelp.org>
1998-12-27 23:23:26 +00:00
Poul-Henning Kamp
19c749625f Initial entry of ISDN4BSD into the FreeBSD tree.
ISDN4BSD is the work of our brand-new comitter: Hellmuth Michaelis,
who has done a tremendous amount of work to bring us this far.

There are still some outstanding issues and files to bring into
the tree, and for now it will be needed to pick up all the extra
docs from the isdn4bsd release.

It is probably also a very good idea to subscribe to the isdn@freebsd.org
mailing list before you try this out.

These files correspond to release "beta Version 0.70.00 / December
1998" from Hellmuth.
1998-12-27 21:47:14 +00:00
Søren Schmidt
50bac46f45 Pre 3.0 branch cleanup sos#2: sound
Superceded by the snd driver...
1998-12-27 14:21:37 +00:00
Poul-Henning Kamp
2d1a2544dd forgot to remote options here. 1998-12-27 13:36:44 +00:00
Mike Smith
084b6a51f3 Move the "generic" SMP options from options.i386 to conf/options 1998-12-19 23:07:51 +00:00
Warner Losh
69acd21dfd Add support for the YE-Data external PCMCIA floppy driver. This
floppy is used on the toshiba Libretto line of subnotebook computers.
It differs from a normal floppy in that you must use PIO rather than
DMA to transfer the data.

To enable this, you must add options "FDC_YE" to your kernel.  I don't
have a machine that has a floppy and a pcmcia slot to test to make
sure that this doesn't impact normal floppy units, so I've left this as
an option.

I have ported this to -current and made an attempt to ensure that the
indentation conforms to style(9), aka the bruce filter.

Reviewed by:	nate, markm
Submitted by:	David Horwitt (dhorwitt@ucsd.edu)
1998-12-12 08:16:01 +00:00
Matthew Dillon
dadea2fa26 Obtained from: "Kenneth D. Merry" <ken@plutotech.com>
ICMP_BANDLIM option moved from i386/conf/options.i386 to generic
    conf/options since it is platform indpendant.
1998-12-05 03:19:51 +00:00
Matthew Dillon
3b60b6ac12 Reviewed by: freebsd-current
Add ICMP_BANDLIM option
1998-12-03 20:06:01 +00:00
Eivind Eklund
340fe9ae67 Make it possible to adjust the IDE probe delay from kernel config files. 1998-11-15 20:08:50 +00:00
Mike Smith
5aa27731b7 Remove USERCONFIG_BOOT, add INTRO_USERCONFIG 1998-11-03 21:08:49 +00:00
KATO Takenori
4536af6a70 - Implement enabling write allocate on AMD K5/K6/K6-2 cpus.
The code was originaly contributed by Kelly Yancey
  <kbyanc@freedomnet.com> in PR i386/6269 and revised by Akio Morita
  <amorita@meadow.scphys.kyoto-u.ac.jp> and me.  Test was performed by
  Akio Morita and Toshiomi Moriki <moriki@db.is.kyushu-u.ac.jp>.
- Fix stylistic bug in identcpu.c.
- Update copyright in initcpu.c
- Fix typo in LINT.

PR:		6269 and 6270
1998-10-06 13:16:29 +00:00
Peter Wemm
10baba4b95 Goodbye BOUNCE_BUFFERS, for a hack it has served us well.
The last consumer of this code (the old SCSI system) has left us and
the CAM code does it's own bouncing.  The isa dma system has been
doing it's own bouncing for a while too.

Reviewed by:	core
1998-09-25 17:34:49 +00:00
Kazutaka YOKOTA
e91db91d4e SC_BAD_FLICKER -> SC_ALT_SEQACCESS
Now supposedly less harmful way of accessing VGA sequencer registers
is default. An alternative, often troublesome, I/O access is optional.

Discussed with: sos, jkh
1998-09-24 13:20:47 +00:00
Søren Schmidt
a8445737e7 Add VESA support to syscons.
Kazu writes:

The VESA support code requires vm86 support. Make sure your kernel
configuration file has the following line.
        options "VM86"
If you want to statically link the VESA support code to the kernel,
add the following option to the kernel configuration file.
        options "VESA"

The vidcontrol command now accepts the following video mode names:
VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600

The VESA_800x600 mode is a raster display mode. The 80x25 text will
be displayed on the 800x600 screen. Useful for some laptop computers.

vidcontrol accepts the new `-i <info>' option, where <info> must be
either `adapter' or `mode'.  When the `-i adapter' option is given,
vidcontrol will print basic information (not much) on the video
adapter. When the `-i mode' option is specified, vidcontrol will
list video modes which are actually supported by the video adapter.

Submitted by:   Kazutaka YOKOTA yokota@FreeBSD.ORG
1998-09-15 18:16:39 +00:00
Justin T. Gibbs
700daf5ea0 sd->da, od is gone, no SCSI control devices.
new pass, xpt, and targ devices.

Nuke no longer used AHC options.
1998-09-15 10:01:14 +00:00
Brian Somers
8aa2558802 Make PCIC_RESUME_RESET an proper option.
My laptop (a CTX Cybernote) needs this.  It claims to have a

  PC-Card VLSI 82C146 (5 mem & 2 I/O windows)
1998-09-08 18:09:51 +00:00
Kazutaka YOKOTA
c0fad1a4cf - Added SC_BAD_FLICKER for syscons.
- Added the flag 0x40 (quiet bell) for syscons.
1998-08-10 08:40:27 +00:00
Jordan K. Hubbard
afc2d1c74e A few misc changes to get the spigot and meteor board working in 3.0.
Submitted by:	Jim Lowe <james@miller.cs.uwm.edu>
1998-08-08 19:26:08 +00:00
Bruce Evans
673796a715 Nuked opt_defunct.h and kern_opt.c. config(8) now generates good enough
warnings about all unknown options.
1998-06-30 14:43:04 +00:00
John-Mark Gurney
b039fc4c34 remove option LINUX as it did nothing, add DEBUG_LINUX to debug the
linux emulation...

(actually moved LINUX to opt_dontuse.h)
1998-06-30 08:40:33 +00:00
John-Mark Gurney
3f139a1a4c move OVERRIDE_TUNER from i386 to general options... it's not i386
specific
1998-06-30 08:32:51 +00:00
John-Mark Gurney
a9e837f479 document options to hardwire GUS irq/dmas... 1998-06-30 08:24:02 +00:00
John Dyson
5498a452bc Support better performance with P6 architectures and in SMP
mode.  Unnecessary TLB flushes removed.  More efficient
page zeroing on P6 (modify page only if non-zero.)
1998-05-11 02:13:47 +00:00
Amancio Hasty
9ff07e3256 Reviewed by: Amancio
Submitted by:	Roger Hardiman <roger@cs.strath.ac.uk>
Roger Hardiman <roger@cs.strath.ac.uk> :
	Revised autodetection code to correctly handle both
	old and new VideoLogic Captivator PCI cards.
	Added tsleep of 2 seconds to initialistion code for PAL users.
	Corrected clock selection code on format change.

--- Amancio
1998-04-18 04:58:33 +00:00
Eivind Eklund
005092bba6 Turn "PMAP_SHPGPERPROC" into a new-style option, add it to LINT, and
document it there.
1998-03-09 22:09:13 +00:00
Eivind Eklund
c2469addb2 Make TUNE_1542 a new-style option, and enable this option in LINT. It
has been disabled since 1994 by mistake (or at least I hope so :-)
1998-02-21 10:11:43 +00:00
Steve Price
ad64a9aade Don't propogate *_DEBUG options. Use DEBUG and recompile
only those parts of the kernel that you are interested in.

Prodded by:	Bruce Evans <bde@zeta.org.au>
1998-02-20 04:19:39 +00:00
Steve Price
34d1c7b48c Add an LPT_DEBUG option.
PR:		5773
Submitted by:	Dag-Erling Coidan Smorgrav <dag-erli@ifi.uio.no>
1998-02-20 02:44:18 +00:00
Kazutaka YOKOTA
2589e75553 Added SC_DISABLE_REBOOT and SC_MOUSE_CHAR. 1998-02-11 16:22:30 +00:00
Bruce Evans
44429dc4f7 Converted DISABLE_PSE to a new-style option.
Fixed some formatting in options.i386.
1998-02-03 22:09:01 +00:00
Eivind Eklund
e0d781f3a5 Make POWERFAIL_NMI, PPS_SYNC and NATM new style options.
This also fixes a couple of defunct options; submitted by bde.
1998-01-31 05:00:21 +00:00
Julian Elischer
3458e54ac1 Move DPT related options out of i386 specific files
so DPT devices can be used on other PCI (alpha?) machines.

Suggested by: several people
1998-01-26 18:31:18 +00:00
Julian Elischer
b37c91fdc7 Add Simon Shapiro's DPT driver
this shouldn't break anything existing.
Userland utilities to follow.
1998-01-26 06:11:18 +00:00
Eivind Eklund
bed196b4e2 Turn CLK_USE_TSC_CALIBRATION into a new-style option. 1998-01-25 04:37:47 +00:00
Poul-Henning Kamp
d46e059f94 wash, sort and put in order various nits from the i586_ctr -> tsc
commit.

Pointed out by: bde
1997-12-28 13:36:09 +00:00
Poul-Henning Kamp
cb0a3a9533 ename "i586_ctr" to "tsc" (both upper and lower case instances).
Fix a couple of printfs too.

Warning: This changes the names of a couple of kernel options!
1997-12-26 20:41:08 +00:00
Kazutaka YOKOTA
b8e63afa1c Remove obsolete psm driver options: PSM_ACCEL, PSM_EMULATION,
PSM_CHECKSYNC.
1997-12-09 11:56:19 +00:00
John-Mark Gurney
b0050656a7 document and make the NO_F00F_HACK a proper option...
Forgotten by:	sef
1997-12-04 21:20:58 +00:00
Joerg Wunsch
d37346eefb Make all the documented (in pcvt(4)) options supported options. While
i was at it, do no longer insist on `PCVT_FREEBSD' being declared in
the config file, but default it to a reasonable value.

More cleanup to follow, but this part is safe for RELENG_2_2, too.
1997-10-18 10:59:47 +00:00
Peter Wemm
98823b2366 Convert the VM86 option from a global option to an option only depended
on by the files that use it.  Changing the VM86 option now only causes
a recompile of a dozen files or so rather than the entire kernel.
1997-10-10 09:44:12 +00:00
John-Mark Gurney
6a796ce0a1 teach sio how to attach to isa PnP cards. This is mainly for use with
internal modems.  Currently detects a USR modem, and a couple Supra
modems...  vendor id's for sio capabile cards welcomed...

document new option EXTRA_SIO that will increase sio's internal data
structures to support X more serial ports...  these are used by the
PnP part of sio for attaching...  If you don't have it specified, it
will default to 2...  This is defaulted to 0 if you don't have PnP
compiled into your kernel...

also document that if you set the PnP flags (pnp x flags y) to 0x1 that
the modem will be refused to be recognized by the sio driver... this
is for people that want the traditional isa driver to probe and attach
the modem... (for keeping legacy sio numbering)
1997-09-19 15:25:49 +00:00
Joerg Wunsch
d2fb48929a Make FDC_DEBUG a supported option.
Hide the bogus FDC ``chip type'' display behind a (mostly) undocumented
option, since people started to trust the bogus claim.  Once we're going
to handle 2.88 MB controllers, we have to redo the chip detection, by
now just leave it hidden.
1997-09-16 07:45:45 +00:00
Kazutaka YOKOTA
297976f79f Add a new compile option SC_HISTORY_SIZE for syscons. 1997-09-04 23:03:11 +00:00
Bruce Evans
6d58e6cbc4 Fixed options SHOW_BUSYBUFS and PANIC_REBOOT_WAIT_TIME which were broken
by incomplete cutting and pasting from machdep.c to kern_shutdown.c.

PR:		3953
1997-08-31 23:08:38 +00:00
Bruce Evans
f3086365a3 Put I*86_CPU options in opt_global.h and don't #include "opt_cpu.h"
centrally.
1997-08-31 22:43:46 +00:00
John Dyson
b6a6d066a8 Add VM86 to the options. 1997-08-09 00:19:39 +00:00
Mike Smith
3476cdb9f4 Sanitise the Wavelan entries.
Submitted by:	bde
1997-08-02 05:20:14 +00:00
Mike Smith
36bdbe9431 New LINT comments and options for the Wavelan (wl) driver.
Submitted by:	Jim Binkley <jrb@cs.pdx.edu>
1997-08-01 03:33:08 +00:00
Steve Passe
25717e9980 Removed "options SMP_TIMER_NC". 1997-07-26 01:46:03 +00:00
Poul-Henning Kamp
38d8a113a9 Add option for compiling in a 8x16 font. 1997-07-25 11:53:30 +00:00
Bruce Evans
c3ed6aa9cd Added CPU_DIRECT_MAPPED_CACHE. 1997-07-13 15:26:54 +00:00
Kazutaka YOKOTA
5d3b146552 options.i386:
- Added the psm options PSM_HOOKAPM and PSM_RESETAFTERSUSPEND.

LINT:
- Added the psm options PSM_HOOKAPM and PSM_RESETAFTERSUSPEND.
- Added comments on the flag 0x20 for syscons.
- Clarified descriptions on the flags (0x02, 0x04) regarding the cursor
  shape in syscons.
1997-06-30 14:37:43 +00:00
Peter Wemm
b3196e4b9f Preliminary support for per-cpu data pages.
This eliminates a lot of #ifdef SMP type code.  Things like _curproc reside
in a data page that is unique on each cpu, eliminating the expensive macros
like:    #define curproc (SMPcurproc[cpunumber()])

There are some unresolved bootstrap and address space sharing issues at
present, but Steve is waiting on this for other work.  There is still some
strictly temporary code present that isn't exactly pretty.

This is part of a larger change that has run into some bumps, this part is
standalone so it should be safe.  The temporary code goes away when the
full idle cpu support is finished.

Reviewed by: fsmp, dyson
1997-06-22 16:04:22 +00:00
Paul Traina
5ea6cb03f3 Bring back CONSPEED as a last-ditch default if you can't change the speed
any other way.

Requested by: dfr
1997-06-04 16:25:15 +00:00
Paul Traina
69d2ceed21 CONSPEED is defunct. 1997-06-04 04:55:26 +00:00
Mike Smith
98d46ad0c9 Add the 'wl' ISA Wavelan driver.
Obtained from:	Jim Binkley <jrb@cs.pdx.edu>
1997-05-22 08:47:40 +00:00
Peter Wemm
53815e2fe6 Round 1 of a long series of commits..
Move SMP and APIC_IO from opt_smp.h to opt_global.h
1997-05-07 19:39:16 +00:00
Stefan Eßer
862b403b04 Move CMD640 option from kernel Makefile into opt_wd.h
Submitted by:		Wolfgang Helbig <helbig@mx.ba-stuttgart.de>
1997-04-28 19:26:18 +00:00
Steve Passe
2b45006334 remove the SMP_INVLTLB option, making the code default for APIC_IO.
Reviewed by:	informal discussion with Peter Wemm <peter@spinner.DIALix.COM>
1997-04-28 00:24:28 +00:00
Peter Wemm
d061973c76 Create a special option file "opt_global.h" which is included by all
source files via a 'cc -include opt_global.h ...' type arrangement.
This means we can untangle certain header files.

options.i386 has a placeholder until it has a real member so we can avoid
having to teach config about it just yet.

Reviewed by: bde
1997-04-27 20:01:47 +00:00
Peter Wemm
477a642cee Man the liferafts! Here comes the long awaited SMP -> -current merge!
There are various options documented in i386/conf/LINT, there is more to
come over the next few days.

The kernel should run pretty much "as before" without the options to
activate SMP mode.

There are a handful of known "loose ends" that need to be fixed, but
have been put off since the SMP kernel is in a moderately good condition
at the moment.

This commit is the result of the tinkering and testing over the last 14
months by many people.  A special thanks to Steve Passe for implementing
the APIC code!
1997-04-26 11:46:25 +00:00
Bruce Evans
8e71151378 Moved COMCONSOLE, CONADDR and CONUNIT to defunct options. 1997-04-05 13:21:08 +00:00
KATO Takenori
4c024bbdf8 Improved CPU identification and initialization routines. This
supports All Cyrix CPUs, IBM Blue Lightning CPU and NexGen (now AMD)
Nx586 CPU, and initialize special registers of Cyrix CPU and msr of
IBM Blue Lightning CPU.

If revision of Cyrix 6x86 CPU < 2.7, CPU cache is enabled in
write-through mode.  This can be disabled by kernel configuration
options.

Reviewed by:	Bruce Evans <bde@freebsd.org> and
            	Jordan K. Hubbard <jkh@freebsd.org>
1997-03-22 18:54:54 +00:00
Joerg Wunsch
1b0d314332 Since i don't see that anybody is implementing a more correct EISA
probing anytime soon, make EISA_SLOTS a fully supported option.  It's
required for the HP NetServer LC series machines.

Next stop: make dset(8) aware of it as well.
1997-03-12 17:41:35 +00:00
Bruce Evans
98d0a0b543 Removed nonexistent option PSM_NO_RESET. 1997-02-28 16:56:06 +00:00
Peter Wemm
6875d25465 Back out part 1 of the MCFH that changed $Id$ to $FreeBSD$. We are not
ready for it yet.
1997-02-22 09:48:43 +00:00
Bruce Evans
488600a422 Added KBD_MAXRETRY and PSM_NO_RESET. 1997-01-27 11:54:56 +00:00
Søren Schmidt
b6b9dfa17e Upgrade the kbdio rutines to provide queued kbd & mouse events.
Minor other updates to syscons by me.

Submitted by:	Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
1997-01-15 18:16:32 +00:00
Jordan K. Hubbard
1130b656e5 Make the long-awaited change from $Id$ to $FreeBSD$
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.

Boy, I'm glad we're not using sup anymore.  This update would have been
insane otherwise.
1997-01-14 07:20:47 +00:00
Justin T. Gibbs
11b5ea7239 Since there have been so many reports of the Memory Mapped I/O to the
aic7xxx cards failing on certain motherboards, reverse the logic used to
control this feature.  AHC_FORCE_PIO is replaced with AHC_ALLOW_MEMIO.
GENERIC no longer needs to specify the AHC_FORCE_PIO option since this is
the default.
1996-11-16 01:09:20 +00:00
Nate Williams
a7320980f6 Removed (now unused) XT_KEYBOARD option. 1996-11-11 22:04:31 +00:00
Bruce Evans
1fe048505d Replaced I586_OPTIMIZED_BCOPY and I586_OPTIMIZED_BZERO with boot-time
negative-logic flags (flags 0x01 and 0x02 for npx0, defaulting to unset = on).
This changes the default from off to on.  The options have been in current
for several months with no problems reported.

Added a boot-time negative-logic flag for the old I5886_FAST_BCOPY option
which went away too soon (flag 0x04 for npx0, defaulting to unset = on).

Added a boot-time way to set the memory size (iosiz in config, iosize in
userconfig for npx0).

LINT:
Removed old options.  Documented npx0's flags and iosiz.

options.i386:
Removed old options.

identcpu.c:
Don't set the function pointers here.  Setting them has to be delayed
until after userconfig has had a chance to disable them and until after
a good npx0 has been detected.

machdep.c:
Use npx0's iosize instead of MAXMEM if it is nonzero.

support.s:
Added vectors and glue code for copyin() and copyout().
Fixed ifdefs for i586_bzero().
Added ifdefs for i586_bcopy().

npx.c:
Set the function pointers here.
Clear hw_float when an npx exists but is too broken to use.
Restored style from a year or three ago in npxattach().
1996-11-11 20:39:03 +00:00
Satoshi Asami
33c58c9f8f Remove option I586_FAST_BCOPY. The code will be included by default
if I586_CPU is defined.  Note there is a runtime check so the code
won't be run for non-Pentium CPUs anyway.

2.2 candidate, this code has been tested for almost half year in -current.
1996-11-08 02:38:44 +00:00
Paul Traina
7fe8c7a026 add in CONSPEED option 1996-11-02 02:25:22 +00:00
Justin T. Gibbs
1affda38c1 Add two new aic7xxx driver options:
AHC_FORCE_PIO - This forces the driver to use PIO even on systems that
	say they have memory mapped the controller's registers.  This
	seems to fix Ken Lam's problems.  I've also placed this option
	in the GENERIC kernel file so that we are guaranteed to install
	even on these flakey machines.

AHC_SHARE_SCBS - This option attempts to share the external SCB SRAM on
	the 398X controllers allowing a totoll of 255 non-paged SCBs.
	This doesn't work quite yet, so this option is mostly here to
	help 398X owners to experiment and give me feedback until this
	works properly.
1996-10-28 06:05:58 +00:00
Paul Traina
dcb21864dc Remove SC_KBD_PROBE_WORKS option and replace it with a simple run-time flag
bit (0x0008) in the sc driver configuration line.  This way it's easy to
boink a generic kernel.

Also, document and place in an opt_ file the #define's for overriding which
serial port is the system console.
Approved by:	sos
1996-10-23 07:29:44 +00:00
Bruce Evans
d6b9e17eb5 Improved non-statistical (GUPROF) profiling:
- use a more accurate and more efficient method of compensating for
  overheads.  The old method counted too much time against leaf
  functions.
- normally use the Pentium timestamp counter if available.
  On Pentiums, the times are now accurate to within a couple of cpu
  clock cycles per function call in the (unlikely) event that there
  are no cache misses in or caused by the profiling code.
- optionally use an arbitrary Pentium event counter if available.
- optionally regress to using the i8254 counter.
- scaled the i8254 counter by a factor of 128.  Now the i8254 counters
  overflow slightly faster than the TSC counters for a 150MHz Pentium :-)
  (after about 16 seconds).  This is to avoid fractional overheads.

files.i386:
permon.c temporarily has to be classified as a profiling-routine
because a couple of functions in it may be called from profiling code.

options.i386:
- I586_CTR_GUPROF is currently unused (oops).
- I586_PMC_GUPROF should be something like 0x70000 to enable (but not
  use unless prof_machdep.c is changed) support for Pentium event
  counters.  7 is a control mode and the counter number 0 is somewhere
  in the 0000 bits (see perfmon.h for the encoding).

profile.h:
- added declarations.
- cleaned up separation of user mode declarations.

prof_machdep.c:
Mostly clock-select changes.  The default clock can be changed by
editing kmem.  There should be a sysctl for this.

subr_prof.c:
- added copyright.
- calibrate overheads for the new method.
- documented new method.
- fixed races and and machine dependencies in start/stop code.

mcount.c:
Use the new overhead compensation method.

gmon.h:
- changed GPROF4 counter type from unsigned to int.  Oops, this should
  be machine-dependent and/or int32_t.
- reorganized overhead counters.

Submitted by:	Pentium event counter changes mostly by wollman
1996-10-17 19:32:31 +00:00
Bruce Evans
c20b324bb6 Put I*86_CPU defines in opt_cpu.h. 1996-10-09 19:47:44 +00:00
Bruce Evans
d656e316f8 Added new documented options I586_OPTIMIZED_BCOPY and I586_OPTIMIZED_BZERO.
Added old misnamed option I586_FAST_BCOPY in options.i386.

Added old undocumented CLK* and SI_DEBUG options in LINT.
1996-10-09 18:36:44 +00:00
Jordan K. Hubbard
d50a30076c Multiple changes stacked as one commit since they all depend on one another.
First, change sysinstall and the Makefile rules to not build the kernel
nlist directly into sysinstall now.  Instead, spit it out as an ascii
file in /stand and parse it from sysinstall later.  This solves the chicken-n-
egg problem of building sysinstall into the fsimage before BOOTMFS is built
and can have its symbols extracted.  Now we generate the symbol file in
release.8.

Second, add Poul-Henning's USERCONFIG_BOOT changes.  These have two
effects:

	1. Userconfig is always entered, rather than only after a -c
	   (don't scream yet, it's not as bad as it sounds).

	2. Userconfig reads a message string which can optionally be
	   written just past the boot blocks.  This string "preloads"
	   the userconfig input buffer and is parsed as user input.
	   If the first command is not "USERCONFIG", userconfig will
	   treat this as an implied "quit" (which is why you don't need
	   to scream - you never even know you went through userconfig
	   and back out again if you don't specifically ask for it),
	   otherwise it will read and execute the following commands
	   until a "quit" is seen or the end is reached, in which case
	   the normal userconfig command prompt will then be presented.

  How to create your own startup sequences, using any boot.flp image
from the next snap forward (not yet, but soon):

	% dd of=/dev/rfd0 seek=1 bs=512 count=1 conv=sync <<WAKKA_WAKKA_DOO
USERCONFIG
irq ed0 10
iomem ed0 0xcc000
disable ed1
quit
WAKKA_WAKKA_DOO


Third, add an intro screen to UserConfig so that users aren't just thrown
into this strange screen if userconfig is auto-launched.  The default
boot.flp startup sequence is now, in fact, this:

	USERCONFIG
	intro
	visual

(Since visual never returns, we don't need a following "quit").

Submitted-By: phk & jkh
1996-10-05 10:44:07 +00:00
Paul Traina
14b7c0f2f9 add SC_SPLASH_SCREEN to opt_syscons.h (sigh) 1996-10-02 03:48:09 +00:00
Paul Traina
6e702c9964 Document the Adaptec driver options for tagged command queueing and SCB
paging (with a warning not to use SCB paging) and create an opt_aic7xxx.h
file for these options.
1996-10-01 03:01:06 +00:00
Poul-Henning Kamp
96fc6efbe3 Make userconfig two (default: on) options:
USERCONFIG to enable
	VISUAL_USERCONFIG to get the gui stuff too.
Requested by: pst
1996-09-11 19:53:45 +00:00
Bruce Evans
dad0de774e Removed bogus LARGMEM code and option. The code paniced when
biosextmem > 65536, but biosextmem is a 16-bit quantity so it is
guaranteed to be < 65536.  Related cruft for biosbasemem was
mostly cleaned up in rev.1.26.
1996-09-10 23:07:04 +00:00
Bruce Evans
683cbdf4af Fixed spelling of new SC_KBD_PROBE_WORKS option in options.i386.
It worked because it is spelled correctly in LINT.

Added old obscure syscons options MAXCONS, SLOW_VGA and XT_KEYBOARD.
This file should be sorted both alphabetically and on the module
name by using a consistent prefix for each module, but there is no
consistency in the old options.  E.g., MAXCONS is spelled PCVT_NSCREENS
for pcvt.
1996-09-10 21:38:47 +00:00
Paul Traina
61238661b6 Add ATAPI_STATIC, ATAPI, and SC_KBD_PROBE_WORKS options. 1996-09-06 23:33:45 +00:00