Work is ongoing to add support for pfsync over IPv6. This required some
changes to allow for differentiating between the two families in a more
generic way.
This patch converts the relevant ioctls to using nvlists, making future
extensions (such as supporting IPv6 addresses) easier.
Sponsored by: InnoGames GmbH
Differential Revision: https://reviews.freebsd.org/D36277
The kernel handles the managment of UFS/FFS snapshots. Since UFS/FFS
updates filesystem data (rather than always writing changes to new
locations like ZFS), the kernel must check every filesystem write
to see if the block being written is part of a snapshot. If it is
part of a snapshot, then the kernel must make a copy of the old
block value into a newly allocated block for the snapshot before
allowing the write to be done. Similarly, if a block is being freed,
the kernel must check to see if it is part of a snapshot and let
the snapshot claim the block rather than freeing it for future use.
When a snapshot is freed, its blocks need to be offered to older
snapshots and freed only if no older snapshots wish to claim them.
When snapshots were added to UFS/FFS they were integrated into soft
updates and just a small part of the management of snapshots needed
to be added to fsck_ffs(8) as soft updates minimized the set of
snapshot changes that might need correction. When journaling was
added to soft updates a much more complete knowledge of snapshots
needed to be added to fsck_ffs(8) for it to be able to properly
handle the filesystem changes that a journal rollback needs to do
(specifically the freeing and allocation of blocks). Since this
functionality was unavailable, the use of snapshots was disabled
when running with journaled soft updates.
This set of changes imports the kernel code for the management of
snapshots to fsck_ffs(8). With this code in place it will become
possible to enable snapshots when running with journalled soft
updates. The most immediate benefit will be the ability to use
snapshots to take consistent filesystem dumps on live filesystems.
Future work will be done to update fsck_ffs(8) to be able to use
snapshots to run in background on live filesystems running with
journaled soft updates.
Reviewed by: kib
Tested by: Peter Holm
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D36491
In order to use the shutdown command, the user must
have root privileges or be a member of the operator group.
PR: 266525
Reported by: Zsolt Udvari <uzsolt at uzsolt hu>
Reviewed by: pauamma
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D36688
If no IPv4-host, IPv4-mcast-group or IPv6-host is passed, it will
display the usage. The tests are passing because they are just checking
that the exit code is 1.
Fix the tests by checking the appropriate output message.
While here, change the description to match the output and add the
missing requirements.
Reviewed by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D37250
Allow pf (l2) to be used to redirect ethernet packets to a different
interface.
The intended use case is to send 802.1x challenges out to a side
interface, to enable AT&T links to function with pfSense as a gateway,
rather than the AT&T provided hardware.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D37193
There are known issues with unionfs, and the mount_unionfs man page has
a cautionary statement about its use. The caution had additional
"humourous" statements like "BEWARE OF DOG" but they served only to
confuse the situation. Remove them.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
When syncookies are in adaptive mode they may be active or inactive.
Expose this status to users.
Suggested by: Guido van Rooij
Sponsored by: Rubicon Communications, LLC ("Netgate")
devmatch is useful on standalone machine but not on jails.
Put devinfo(8) and libdevinfo there too.
Differential Revision: https://reviews.freebsd.org/D36229
It's not really useful in a jail or in a mdroot or even if a users
wants to do a full zfs machine.
Reviewed by: mckusick
Differential Revision: https://reviews.freebsd.org/D36227
It is useful to have zfs utilities and lib in a separate package as
it allow users to create image that can support ZFS (i.e. not with
WITHOUT_ZFS in src.conf set) without bloating the default image with
all zfs tools (for example for jails).
Differential Revision: https://reviews.freebsd.org/D36225
For most users it's not needed to boot and they are also
available in the FreeBSD-rescue package in case an update
break and FreeBSD-geom package isn't updated correctly.
Differential Revision: https://reviews.freebsd.org/D36224
It doesn't really make sense to have it in runtime and let's not
bloat utilities more.
Reviewed by: emaste, imp
Differential Revision: https://reviews.freebsd.org/D36222
It doesn't really make sense to have it in runtime and let's not
bloat utilities more.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D36221
The size of the journaled soft-updates journal should be big enough
to hold two minutes of filesystem metadata-update activity. The
maximum size of the soft updates journal was set in the 1990s. At
the time it was assummed that disk arrays would top out at 16 drives
and disk writes per drive would top out at 500 per second. Today's
I/O subsystems are considerably bigger and faster than those limits.
Thus this delta removes the hard upper limit and lets tunefs(8) and
newfs(8) set the upper bound based on the size of the filesystem and
its cylinder groups.
Sponsored by: The FreeBSD Foundation
Add a descrition to the newfs(8) -j (journal enablement) flag
that explains what soft updates journaling does, the tradeoffs
to using it, and the limitations that it imposes. Copied from
the description in tunefs(8).
PR: 261944
Sponsored by: The FreeBSD Foundation
On systems where mac_veriexec is enforced, init should run its scripts in verified mode.
This relies on the verify shell option introduced by D30464. init will detect if the shell
is /bin/sh, and in which case, add the verify option to the argument vector.
The verify option propagates to all files sourced by the shell, ensuring a better
protection than if the script was tested against an open(O_VERIFY) before running it.
This security can be bypassed with the kenv which overloads the shell to use.
However we feel confident that on systems running with mac_veriexec, this kenv will be blocked somehow.
Also, the verify option has no effect on systems where mac_veriexec is not loaded nor enforced.
Differential revision: https://reviews.freebsd.org/D34622
Reviewed by: sjg, wma
Use uintmax_t cast to print the size of the device for the non-humanize
case to avoid issues with 32-bit longs.
Fixes: 9c1bec9c21
Sponsored by: Netflix
Add an option of -h --human to output human readable size unit instead
of the fixed unit (MB).
Signed-off-by: Wanpeng Qian <wanpengqian@gmail.com>
Reviewed by: imp, bcr
Differential Revision: https://reviews.freebsd.org/D32957
Fix:
--- all_subdir_sbin ---
/opt/src/git-src/sbin/nvmecontrol/modules/samsung/samsung.c:149:64:
error: format specifies type 'unsigned long' but the argument has type
'uint64_t' (aka 'unsigned long long') [-Werror,-Wformat]
printf(" Read Reclaim Count : %lu\n",
le64dec(&temp->rrc));
~~~
^~~~~~~~~~~~~~~~~~~
%llu
/opt/src/git-src/sbin/nvmecontrol/modules/samsung/samsung.c:150:64:
error: forma t specifies type 'unsigned long' but the argument has type
'uint64_t' (aka 'unsigned long long') [-Werror,-Wformat]
printf(" Lifetime Uncorrectable ECC Count : %lu\n",
le64dec(&temp->lueccc));
~~~
^~~~~~~~~~~~~~~~~~~~~~
%llu
2 errors generated.
Fixes: 84e8678870
Samsung PM983 SSD has a 0xca logpage. It has more information compared
to Intel's this patch tested on PM983 M2 SSD and works as expected.
Reviewed by: imp@
Approved by: kp@
Event: Aberdeen Hackathon 2022
Differential revision: https://reviews.freebsd.org/D33749
Use time_t rather than uint32_t to represent the timestamps. That means
we have 64 bits rather than 32 on all platforms except i386, avoiding
the Y2K38 issues on most platforms.
Reviewed by: Zhenlei Huang
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D36837
On certain cloud platforms (Google Cloud, Packet.net and others) the
DHCP server offers a /32 address. This makes adding the default route
fail since it is not reachable via any interface. Linux's
dhclient-script seem to usually have a special case for that and
explicitly adds an interface route to the router's address.
FreeBSD's dhclient-script already has a special case for when the router
address is the same as the leased address. Now also add one for when
it's a different address that doesn't fall in the interface's subnet.
PR: 241792
Event: Aberdeen hackathon 2022
Submitted by: sigsys@gmail.com
Reviewed by: dch, kp, bz (+1 on the idea, not reviewed), thj
MFC after: 1 week
wdc_get_dui_log_size allocates a buffer and then advances the
returned pointer. Passing this advanced pointer to free() is UB,
so save the original pointer to pass to free() instead.
Reviewed by: imp
Reported by: GCC 12 -Wfree-nonheap-object
Differential Revision: https://reviews.freebsd.org/D36827
The RFC for this finally got published and, therefore,
now has a number. This patch puts this RFC number
in the man page.
This is a content change.
MFC after: 1 week
Fixes: eec02418d8 Remove support for FDDI and token ring media types in userland utilities.
Reviewed by: brooks, gjb, imp
Approved by: brooks (src), gjb (mentor, src), imp (src)
Differential Revision: https://reviews.freebsd.org/D36668
MFC after: 3 days
When an internal or other error occurs during the listing of a pool,
return an error code when extiting ippool(8). Printing an error to
stderr without returning an error code is useless in shell scripts.
MFC after: 2 weeks
Add an ippool(8) option to dump a copy of the inm-memory ippool tables
in an ippool(5) format so that it can be reloaded using ippool -f.
MFC after: 2 weeks
Be more precise in the definition of policy directions
and policy levels.
PR: 250177
Reported by: Bram Ton <bram at cbbg dot nl>
Reviewed by: gbe, ae
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26719
Commit 33721eb991 enabled use of "nolockd" for
NFSv4 mounts. This was done primarily to allow its
use with the "intr" mount option.
This patch updates the man page for this.
This is a content change.
Reviewed by: gbe (manpages), karels
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D36462
When something was found wrong with an inode the error message
was always "UNKNOWN FILE TYPE". This error is now used only when
the file type field is wrong. Other errors have their own messages:
"BAD FILE SIZE", "NEGATIVE FILE SIZE", "BAD SPECIAL-FILE RDEV",
"INVALID DIRECT BLOCK", and "INVALID INDIRECT BLOCK".
More complete information about the inode is also provided.
Sponsored by: The FreeBSD Foundation
We have repeatedly gotten reports of unclassified SIOCIFCREATE2 errors
(usually "Device not configured"). This can happen if there is
configuration for interfaces in rc.conf which do not (yet) exist and
we try to configure. I can, e.g., provoke this by configuring wlan
interfaces with their physical interface not installed.
In order to cut support (guesswork) down print the name of the
interface to be configured with the error message.
Hopefully this will help us in the future to improve other configuration
or driver problems.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Similar to the preceding fix for layer three rules, ensure that we
recursively list wildcard anchors for ethernet rules.
MFC after: 3 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D36417
Fix a couple of problems with printing of anchors, in particular recursive
printing, both of inline anchors and when requested explicitly with a '*'
in the anchor.
- Correct recursive printing of wildcard anchors (recurse into child anchors
rather than rules, which don't exist)
- Print multi-part anchor paths correctly (pr6065)
- Fix comments and prevent users from specifying multi-component names for
inline anchors.
tested by phessler
ok henning
Also fix the relevant pfctl test case to reflect the new (and now
correct) behaviour).
MFC after: 3 weeks
Obtained from: OpenBSD (mcbride, f9a568a27c740528301ca3419316c85a9fc7f1de)
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D36416
Ensure that we pass the (base) anchorname to the kernel, not the '/*'
suffix.
MFC after: 3 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D36415
When calling shutdown, shutdown sends a signal to init and exits. This
causes a race condition for the waitpid function. If the signal wins the
race, wpid will be set to -1 and init calls death_single. If shutdown
wins the race, wpid will be set to the pid of the shutdown process and
the requested_transition will be ignored.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D36356
MFC after: 1 week
Sponsored by: Beckhoff Automation GmbH & Co. KG
If the root directory exists but has a bad block number Pass1 will
accept it and setup an inoinfo structure for it. When Pass2 runs
and cannot read the root inode's content because of a bad (or
duplicate) block number, it removes the bad root inode and replaces
it. As part of creating the replacement root inode, it creates an
inoinfo entry for it. But Pass2 did delete the inoinfo entry that
Pass1 had set up for the root inode so ended up with two inoinfo
structures for it. The final step of Pass2 checks that all the ".."
entries are correct adding them if they are missing which resulted
in a second ".." entry being added to the root directory which
definitely did not go over well in the kernel name cache!
Reported by: Peter Holm
Sponsored by: The FreeBSD Foundation
Commit 603677334a added a sentence with a file path
in it. However, it did not use .Pa since it would leave
a space after it, where ('s) was supposed to go.
This patch rewords the sentence so that .Pa can
be used.
This is a content change.
Suggested by: mkarels
Recent problems related to NFSv4 mounts has been traced
to multiple NFSv4 clients using the same /etc/hostid
(or kern.hostuuid, if you prefer).
This patch adds a sentence to the man page noting that
clients must have unique /etc/hostid's.
This is a content change.
Reviewed by: gbe (manpages)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D36392
Like the detailed diagnostics produced when a bad superblock
is read, provide similar detailed diagnostics when bad
cylinder groups are read.
Reported by: Peter Holm
Tested by: Peter Holm
Sponsored by: The FreeBSD Foundation
The fsck_ffs(8) utility has two subsystems for reading and writing
inodes. The getnextinode() interface is used in Pass 1 (and Pass
1b if needed) to sequentially walk through all the inodes in the
filesystem. The ginode() interface is used to read and write
individual inodes. Pass 1 uses a mix of both interfaces. This
change ensures that ginode() returns a pointer to the inode in the
cache maintained by getnextinode() when that interface holds the
requested inode so that all modifications to the inode are made in
a single place and are all written to the disk together.
Reported by: Peter Holm
Tested by: Peter Holm
Sponsored by: The FreeBSD Foundation
Historically fsck_ffs(8) would only use alternate superblocks when
running in manual mode. When the standard superblock fails, it now
tries to find and use a backup superblocks even when running in `preen'
mode. If an alternate superblock is found and the filesystem is
successfully cleaned up using it, write the alternate superblock
back to the standard superblock so that the filesystem can be
subsequently mounted and used.
Reported by: Peter Holm
Tested by: Peter Holm
Sponsored by: The FreeBSD Foundation
The UFS filesystem expects to find '.' and '..' as the first two entries
in a directory. The kernel's UFS name cache can become quite confused
when these two entries are not present as the first two entries.
Prior to this change, when the fsck_ffs(8) utility detected that
'.' and/or '..' were missing, it would report them, but only offered
to replace them if the space at the beginning of the directory was
available. Otherwise it was left to the system administrator to
move the offending file(s) out of the way and then rerun fsck_ffs(8)
to create the '.' and '..' entries.
With this change, fsck_ffs(8) will always be able to create the '.'
and/or '..' entries. It moves any files in the way elsewhere in the
directory block. If there is no room in the directory block to which
to move them, they are placed in the lost+found directory.
Reported by: Peter Holm
Sponsored by: The FreeBSD Foundation
When either searching for backup UFS superblocks or when explicitly asked
to use one with the -b option, report the reason for failure if it cannot
be used.
Reported by: Peter Holm
Sponsored by: The FreeBSD Foundation
Add a descrition to the tunefs(8) -j (journal enablement) flag
that explains what soft updates journaling does, the tradeoffs
to using it, and the limitations that it imposes.
Requested by: Graham Perrin
PR: 261944
Sponsored by: The FreeBSD Foundation
Allocation or I/O failures in fsck_ffs(8) could cause segment
faults because of missing checks or not-yet-initialized data
structures. Correct these issues.
Reported by: Peter Holm
Sponsored by: The FreeBSD Foundation
into ffs_sbsearch() to allow use by other parts of the system.
Historically only fsck_ffs(8), the UFS filesystem checker, had code
to track down and use alternate UFS superblocks. Since fsdb(8) used
much of the fsck_ffs(8) implementation it had some ability to track
down alternate superblocks.
This change extracts the code to track down alternate superblocks
from fsck_ffs(8) and puts it into a new function ffs_sbsearch() in
sys/ufs/ffs/ffs_subr.c. Like ffs_sbget() and ffs_sbput() also found
in ffs_subr.c, these functions can be used directly by the kernel
subsystems. Additionally they are exported to the UFS library,
libufs(8) so that they can be used by user-level programs. The new
functions added to libufs(8) are sbfind(3) that is an alternative
to sbread(3) and sbsearch(3) that is an alternative to sbget(3).
See their manual pages for further details.
The utilities that have been changed to search for superblocks are
dumpfs(8), fsdb(8), ffsinfo(8), and fsck_ffs(8). Also, the prtblknos(8)
tool found in tools/diag/prtblknos searches for superblocks.
The UFS specific mount code uses the superblock search interface
when mounting the root filesystem and when the administrator doing
a mount(8) command specifies the force flag (-f). The standalone UFS
boot code (found in stand/libsa/ufs.c) uses the superblock search
code in the hope of being able to get the system up and running so
that fsck_ffs(8) can be used to get the filesystem cleaned up.
The following utilities have not been changed to search for
superblocks: clri(8), tunefs(8), snapinfo(8), fstyp(8), quot(8),
dump(8), fsirand(8), growfs(8), quotacheck(8), gjournal(8), and
glabel(8). When these utilities fail, they do report the cause of
the failure. The one exception is the tasting code used to try and
figure what a given disk contains. The tasting code will remain
silent so as not to put out a slew of messages as it trying to taste
every new mass storage device that shows up.
Reviewed by: kib
Reviewed by: Warner Losh
Tested by: Peter Holm
Differential Revision: https://reviews.freebsd.org/D36053
Sponsored by: The FreeBSD Foundation
When the interface does not exist avoid passing host with special pf
modifiers to DNS resolution as they come up empty anyway.
Reviewed by: kp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D35429
In 1e73fbd8b we fixed an issue with POM_STICKYADDRESS being checked in
the wrong struct.
Add a basic test case for this fix.
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
pass inet proto icmp icmp-type {unreach}
pass route-to (if0 127.0.0.1/8) sticky-address inet
The wrong struct was being tested. The parser tries to prevent
"sticky-address sticky-address" syntax but was actually cross-rule
enforcing that ICMP filter cannot be before the use of "sticky-address"
in next rule.
MFC after: 2 weeks
Reviewed by: kp
Differential Revision: https://reviews.freebsd.org/D36050
The fsck_ffs(8) utility made sanity checks of critical superblock
fields by comparing the values of those fields in the standard
superblock againt the values of those fields in the last alternate
superblock. The code for validating a superblock now cover all the
checked fields as well as many more. Further the checks done are
far more comprehensive. So we now drop the alternate superblock
checks as they no longer provide value. Dropping these checks also
eliminates the need to read the alternate superblock.
Rather than trying to shoehorn flags into the requested superblock
address, create a separate flags parameter to the ffs_sbget()
function in sys/ufs/ffs/ffs_subr.c. The ffs_sbget() function is
used both in the kernel and in user-level utilities through export
to the sbget() function in the libufs(3) library (see sbget(3)
for details). The kernel uses ffs_sbget() when mounting UFS
filesystems, in the glabel(8) and gjournal(8) GEOM utilities,
and in the standalone library used when booting the system
from a UFS root filesystem.
The ffs_sbget() function reads the superblock located at the byte
offset specified by its sblockloc parameter. The value UFS_STDSB
may be specified for sblockloc to request that the standard
location for the superblock be read.
The two existing options are now flags:
UFS_NOHASHFAIL will note if the check hash is wrong but will still
return the superblock. This is used by the bootstrap code to
give the system a chance to come up so that fsck can be run to
correct the problem.
UFS_NOMSG indicates that superblock inconsistency error messages
should not be printed. It is used by programs like fsck that
want to print their own error message and programs like glabel(8)
that just want to know if a UFS filesystem exists on a partition.
One additional flag is added:
UFS_NOCSUM causes only the superblock itself to be returned, but does
not read in any auxiliary data structures like the cylinder group
summary information. It is used by clients like glabel(8) that
just want to check for possible filesystem types. Using UFS_NOCSUM
skips the superblock checks for csum data which allows superblocks
that have corrupted csum data to be read and used.
The validate_sblock() function checks that the superblock has not
been corrupted in a way that can crash or hang the system. Unless
the UFS_NOMSG flag is specified, it will print out any errors that
it finds. Prior to this commit, validate_sblock() returned as soon
as it found an inconsistency so would print at most one message.
It now does all its checks so when UFS_NOMSG has not been specified
will print out everything that it finds inconsistent.
Sponsored by: The FreeBSD Foundation
The reported problem is that some geli commands exit with a
success status when they should exit with a failed status.
The gctl_error() function is defined differently in the kernel
(in sys/geom/geom_ctl.c) versus in the geom user facilities (in
sbin/geom/misc/subr.c). In the kernel, calling gctl_error() causes
an error return to be set while in the user version it does not.
It was only by a quirk that had been added to the user geom return
processing that I "cleaned up" that the lack of the user implementaion
to set the error return showed up.
This patch adds the missing setting of the error code when calling
the user facility gctl_error().
Reported by: Jenkins
Debugging by: Alan Somers
Debugging by: Cy Schubert
Debugging by: Li-Wen Hsu
The BSD style commands (with names not ending in "sum") ignored the -c
options and the passed digest value when invoked with -q.
The man page stated that -q causes only the calculated digest to be
printed, but did not consider the case of both the -q and -c being
used in combination.
Since there is no warning that -c will be ignored when the -q option
is used, users night (and did) expect that the exit code would reflect
the matching of the calculated digest and the argument passed with -c.
This update implements and documents this expected behavior.
PR: 265461
Reported by: Dmitrij <bugs.freebsd@1fff.net>
MFC after: 2 weeks
The setvlantag() and setvlanproto() functions are used in two scenarios:
when we create a new vlan interface and when we update an existing
interface.
These are distinguished by the getvlan() at the end of the functions. If
this fails we assume that is because the interface doesn't exist (so
we're creating a new one). We only update the 'params' struct, and
expect the settings to be applied when we vlan_create().
However, if we're updating an existing interface we do not retrieve the
current settings, and can end up invalidating settings.
Fix this by using the settings we retrieved while checking which
scenario we're in.
Note that we do not address this for setvlandev(), because if_vlan does
not allow the vlan parent device to be changed without disassociating it
first (with ifconfig vlanX -vlandev).
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D35848
Only the UFS2 filesystem has support for storing information needed
to find alternate superblocks. If that information is inadvertently
left in place when building a UFS1 filesystem, fsck_ffs may stumble
across it and attempt to use it to recover the UFS1 filesystem
which can only end poorly.
During software installation, use veriexec -S to strictly
enforce certificate validity checks (notBefore, notAfter).
Otherwise ignore certificate validity period.
It is generally unacceptible for the Internet to stop working
just because someone did not upgrade their infrastructure for a decade.
Sponsored by: Juniper Networks, Inc.
Reviewed by: sebastien.bini_stormshield.eu
Differential Revision: https://reviews.freebsd.org/D35758
Generally, access to the kernel debugger is considered to be unsafe from
a security perspective since it presents an unrestricted interface to
inspect or modify the system state, including sensitive data such as
signing keys.
However, having some access to debugger functionality on production
systems may be useful in determining the cause of a panic or hang.
Therefore, it is desirable to have an optional policy which allows
limited use of ddb(4) while disabling the functionality which could
reveal system secrets.
This loadable MAC module allows for the use of some ddb(4) commands
while preventing the execution of others. The commands have been broadly
grouped into three categories:
- Those which are 'safe' and will not emit sensitive data (e.g. trace).
Generally, these commands are deterministic and don't accept
arguments.
- Those which are definitively unsafe (e.g. examine <addr>, search
<addr> <value>)
- Commands which may be safe to execute depending on the arguments
provided (e.g. show thread <addr>).
Safe commands have been flagged as such with the DB_CMD_MEMSAFE flag.
Commands requiring extra validation can provide a function to do so.
For example, 'show thread <addr>' can be used as long as addr can be
checked against the system's list of process structures.
The policy also prevents debugger backends other than ddb(4) from
executing, for example gdb(4).
Reviewed by: markj, pauamma_gundo.com (manpages)
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D35371
Historically, GEOM utilities (gpart(8), gstripe(8), gmirror(8),
etc) used the gctl_error() routine to report errors. If they called
gctl_error() they would exit with EXIT_FAILURE, otherwise they would
return with EXIT_SUCCESS. If they used gctl_error() to output an
informational message, for example when run with the -v (verbose)
option, they would mistakenly exit with EXIT_FAILURE. A further
limitation of the gctl_error() function was that it could only be
called once. Messages from any additional calls to gctl_error()
would be silently discarded.
To resolve these problems a new function, gctl_msg() has been added.
It can be called multiple times to output multiple messages. It
also has an additional errno argument which should be zero if it is
an informational message or an errno value (EINVAL, EBUSY, etc) if
it is an error. When done the gctl_post_messages() function should
be called to indicate that all messages have been posted. If any
of the messages had a non-zero errno, the utility will EXIT_FAILURE.
If only informational messages (with zero errno) were posted, the
utility will EXIT_SUCCESS.
Tested by: Peter Holm
PR: 265184
MFC after: 1 week
Replace ppp(4) removed since FreeBSD 8.0-RELEASE with vlan(4).
While here, remove commented out reference to non-existing "egress"
interface group hiding since initial import of interface groups
from OpenBSD in 2006.
Jails without VNET have complete access to the ipfilter rules, NAT,
pools and logs. This is insecure. Only allow jails to manipulate
ipfilter rules, NAT tables and ippools if the jail has its own VNET.
Otherwise a jail can affect the global system.
This patch brings ipfilter in line with ipfw's support of VNET jails and
non-support of non-VNET jails.
MFC after: 1 week
If the "intr" and/or "soft" mount options are used for
NFSv4 mounts, the protocol can be broken when the
operation returns without waiting for the RPC reply.
The likelyhood of failure increases for NFSv4.1/4.2
mounts, since the session slot will be broken when
an RPC reply is not processed.
This is mentioned in the BUGS section of "man mount_nfs",
but there was no specific mention of the session slot
problem. This patch adds a sentence for this case.
PR: 260011
Reviewed by: gbe
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D35693
If the "intr" and/or "soft" mount options are used for
NFSv4 mounts, the protocol can be broken when the
operation returns without waiting for the RPC reply.
The likelyhood of failure increases for NFSv4.1/4.2
mounts, since the session slot will be broken when
an RPC reply is not processed.
This is mentioned in the BUGS section of "man mount_nfs",
but more needs to be done. This patch adds code that
generates a warning message when the mount is done.
PR: 260011
Reviewed by: emaste
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D35407
Provide more robust parameter parsing in veriexec. Do a little cleanup as well.
Differential revision: https://reviews.freebsd.org/D33246
Obtained from: Semihalf
Reviewed by: sjg, sebastien.bini_stormshield.eu
When growing a UFS/FFS filesystem, the size of the summary information
may expand into additional blocks. These blocks must be removed from
fs_dsize which records the number of blocks in the filesystem that can
be used to hold filesystem data.
While here also update the fs_old_dsize and fs_old_size fields for
compatibility with kernels that were compiled before the addition
of UFS2.
Reported by: Edward Tomasz Napiera
MFC after: 1 week
Any field that starts with # is a commented out field (there as a place
holder only, the data in that place holder is completely ignored). The
previous code improperly detected this using strcmp. Instead, any field
whose names starts with '#' is ignored.
Differential Reivsion: https://reviews.freebsd.org/D34633
named(8) hasn't been in base for some time. Remove all references to it in
manual pages.
Approved by: manpages (Pau Amma)
Differential Revision: https://reviews.freebsd.org/D35586
It may happen that "adjkerntz -a" called from jailed root crontab.
In that case it spams logs with a line:
sysctl(set: "machdep.wall_cmos_clock"): Operation not permitted
Be silent in that case.
MFC after: 1 month
The current situation is fairly confusing, where an integer is interpreted
as a percent until you slap a decimal on it and magically it becomes an
absolute value.
Let's have a flag day in 14.0 and remove this shim entirely. Setting with
percent can still be useful, so allow a trailing '%' to indicate as such.
As a side effect, we tighten down the format allowed in the volume a little
bit by ensuring there's no trailing garbage after the value once it's
separated into left and right components.
Reviewed by: christos, hselasky, pauamma_gundo.com (manpages)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D35101
Honor -q parameter and do not display any warning messages when -q is
specified.
Approved by: dfr
MFC after: 2 weeks
Sponsored by: Resulta, s.r.o.
Differential Revision: https://reviews.freebsd.org/D35511
It may not be known at compile time so we should detect it at run time.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D35118
If isc-dhcp44-server is not installed (as is the case the project's CI
servers) we don't create ngctl.shutdown, causing the 'rm' to fail.
That in turn causes the cleanup function to return non-zero, which
causes kyua to consider the test failed.
Use 'rm -f' instead, so we don't error even if the file doesn't exist.
Sponsored by: Rubicon Communications, LLC ("Netgate")
They are no longer needed, but were likely missed simply because they
don't show up in a grep for 'mips'.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D35475
This avoids the need to drop into the ddb to figure out vnode
usage per file system. It helps to see if they are or are not
being freed. Suggestion to report active vnode count was from
kib@
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D35436
By analogy with IP address matching, add a way to use ipfw radix
tables for MAC matching. This is implemented using new ipfw table
with mac:radix type. Also there are src-mac and dst-mac lookup
commands added.
Usage example:
ipfw table 1 create type mac
ipfw table 1 add 11:22:33:44:55:66/48
ipfw add skipto tablearg src-mac 'table(1)'
ipfw add deny src-mac 'table(1, 100)'
ipfw add deny lookup dst-mac 1
Note: sysctl net.link.ether.ipfw=1 should be set to enable ipfw
filtering on L2.
Reviewed by: melifaro
Obtained from: Yandex LLC
MFC after: 1 month
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D35103
mount_nfs creates entries in the mounttab file and umount removes
them. Entries in the mounttab file ae used by rpc.umntall to
notify the NFS server that NFSv3 entries need to be removed when
they have not been removed by umount.
Without this patch, an enty will be created in the mounttab file,
even if the nmount(2) syscall fails for the mount. This patch
modifies the code so that the mounttab entry is only created
after nmount(2) succeeds.
This change only affects NFSv3 and only affects how showmount
displays NFSv3 mounts.
MFC after: 2 weeks
Provide sticky ARP flag for network interface which marks it as the
"sticky" one similarly to what we have for bridges. Once interface is
marked sticky, any address resolved using the ARP will be saved as a
static one in the ARP table. Such functionality may be used to prevent
ARP spoofing or to decrease latencies in Ethernet networks.
The drawbacks include potential limitations in usage of ARP-based
load-balancers and high-availability solutions such as carp(4).
The implemented option is disabled by default, therefore should not
impact the default behaviour of the networking stack.
Sponsored by: Conclusive Engineering sp. z o.o.
Reviewed By: melifaro, pauamma_gundo.com
Differential Revision: https://reviews.freebsd.org/D35314
MFC after: 2 weeks
This tests both both normal (untagged), and pcp tagged (VLAN 0)
networks which are now common for fiber ISPs.
Reviewed by: markj, kp
Differential Revision: https://reviews.freebsd.org/D35178
/etc/rc.d/jail no longer creates /dev/log as a symbolic link since
commit 84b354cb9a.
PR: 228351
Reviewed by: jamie, mark
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D34563
If pfctl is called with "pfctl -a ''" we read outside of the anchoropt
buffer. Check that the buffer is sufficiently long to avoid that.
Maintain the existing (and desired, because it's used as such in
/etc/periodic/security/520.pfdenied) behaviour of treating "-a ''" as a
request for the root anchor (or no anchor specified).
PR: 264128
Reviewed by: kp
The command "ping -S dotted.quad hostname" fails on dual-stack hosts
with the confusing message "ping: invalid source address: Name does
not resolve" because IPv6 is selected in preference. If the argument
to -S is numeric (likely), select the corresponding address family,
as if -4 or -6 was specified. Add tests that either IPv4 or IPv6 can
be forced via a -S parameter.
Reviewed by: asomers
Differential Revision: https://reviews.freebsd.org/D35271
MFC after: 1 week
Previously we expected the DIOCSKERNELDUMP ioctl to return ENXIO if the
interface was down, but it does not actually do this. Grab the link
status using getifaddrs(3) instead, and downgrade this case from an
error to a warning; the user might bring the link back up at a later
time.
Reviewed by: cem
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D35196
I pushed the last changes before I'd noticed the better wording
suggestions in the review. Also include a note that not all lines will
have a timestampe. Some multi-line messages are generated with sbuf, and
when those are pushed, only the first line will have the
timestamp. Document this quirky behavior as well since fixing it likely
won't happen soon. CAM periph drivers generate all the lines in their
announce message together so they aren't intermingled with other things,
for example.
Suggested by: allanjude, emaste, rpokala
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D35139
Differential Revision: https://reviews.freebsd.org/D35141
Today, kern.msgbuf_show_timestamp=1 will give 1 second granularity
timestamps on dmesg lines. When kern.msgbuf_show_timestamp=2, we'll
produce microsecond level graunlarity.
For example:
old (== 1):
[13] Dual Console: Video Primary, Serial Secondary
[14] lo0: link state changed to UP
[15] bxe0: NIC Link is Up, 10000 Mbps full duplex, Flow control: ON - receive & transmit
[15] bxe0: link state changed to UP
new (== 2):
[13.807015] Dual Console: Video Primary, Serial Secondary
[14.544150] lo0: link state changed to UP
[15.272044] bxe0: NIC Link is Up, 10000 Mbps full duplex, Flow control: ON - receive & transmit
[15.272052] bxe0: link state changed to UP
Sponsored by: Netflix
its attempt to install SA/SPD into the kernel results in cryptic
EINVAL error code.
Let it be a bit more user-friendly and try to load ipsec.ko
automatically if it is not loaded, just like ifconfig(8) does it
for modules it needs.
PR: 263379
MFC after: 2 weeks
The daemon can specify fsname=XXX in its mount options. If so, the file
system should report f_mntfromname as XXX during statfs. This will show
up in the output of commands like mount and df.
Submitted by: Ali Abdallah <ali.abdallah@suse.com>
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D35090
AEAD ciphers for IPsec combine both encryption and authentication. As
such, ESP configurations using an AEAD cipher should not use a
seperate authentication algorithm via -A. However, this was not
apparent from the setkey manpage and 12.x and earlier did not perform
sufficient argument validation permitting users to pair an explicit -A
such as SHA256-HMAC with AES-GCM. (The result was a non-standard
combination of AES-CTR with the specified MAC, but with the wrong
initial block counter (and thus different keystream) compared to using
AES-CTR as the cipher.)
Attempt to clarify this in the manpage by explicitly calling out AEAD
ciphers (currently only AES-GCM) and noting that AEAD ciphers should
not use -A.
While here, explicitly note which authentication algorithms can be
used with esp vs esp-old. Also add subsection headings for the
different algorithm lists and tidy some language.
I did not convert the tables to column lists (Bl -column) though that
would probably be more correct than using literal blocks (Bd
-literal).
PR: 263379
Reviewed by: Pau Amma <pauamma@gundo.com>, markj
Differential Revision: https://reviews.freebsd.org/D34947
Similar to ipfw rule timestamps, these timestamps internally are
uint32_t snaps of the system time in seconds. The timestamp is CPU local
and updated each time a rule or a state associated with a rule or state
is matched.
Reviewed by: kp
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D34970
Since a16732d670 we always print the l3 src/destination for Ethernet
rules. Update the tests to account for this.
Sponsored by: Rubicon Communications, LLC ("Netgate")
While the kernel only performs the L3 check for
ETHERTYPE_IP/ETHERTYPE_IP6 we should always print the source and
destination addresses.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D34918
Allow tables to be used for the l3 source/destination matching.
This requires taking the PF_RULES read lock.
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D34917
After this, we'll be able to ping a host and not spam the terminal, and
no flooding will have to be involved. I've been doing this under Linux
as ping -fi1 host.
Reviewed by: rpokala, Pau Amma
Differential Revision: https://reviews.freebsd.org/D34882
The new '-L' flag will cause savecore to invoke the new mem(4) kernel
dump ioctl, taking a dump of the running system and writing the result
to a temporary file. Validation of the dump header is performed, similar
to regular crash dumps, and the final result is written to
livecore.X[.zst|.gz].
Also added is the '-Z' flag, which instructs the kernel to compress the
livedump compressed with zstd, akin to the existing -z flag. This option
has no effect in normal savecore(8) operation, but in theory could be
extended to perform such compression while reading the dump from the
dump device.
Encryption is unsupported for live dumps.
For example: 'savecore -Lz /var/crash' would create:
/var/crash/livecore.0.gz
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D34347
Move it to a separate function, allowing its reuse.
Reviewed by: markj
MFC after: 3 days
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D34822
All files are now created relative to savedirfd, e.g. with openat(2).
Therefore, we do not need character buffers to be PATH_MAX bytes long,
just long enough to hold the complete filename. 32 bytes is long enough
in all cases. These can be allocated on the stack.
While here, fix an error message that attempts to use an uninitialized
infoname.
Reviewed by: markj
MFC after: 3 days
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D34821
So that new callers of getbounds() don't need to duplicate it.
Reviewed by: markj
MFC after: 3 days
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D34783
When asked to print rules recursively, correctly recurse for anchors
included in pf.conf with "anchorname/*".
PR: 262590
Reviewed by: kp
MFC after: 3 weeks
This fixes a performance problem where poudriere -j 104 keeps remounting
filesystems, which induce wanting to signal mountd, if running. The
current code tries to do it by creating the pidfile in /var/run and
unlinking it if the operation succeeds, inducing contention against
anything doing an exec as it tries to look up /var/run/ld-elf.so.hints
Differential Revision: https://reviews.freebsd.org/D34681
This check was previously in `create` only, not applying to renames. It
should really be applied at the libbe level, so that we can avoid
writing about this restriction over and over again.
While we're here: `bectl rename` always succeeds, even when it doesn't.
Start returning the error.
Reported By: Christian McDonald <cmcdonald netgate com>
Reviewed by: rew, jwmaag_gmail.com (earlier version)
Differential Revision: https://reviews.freebsd.org/D34605
Discuss the standard type of layout, as well as the "deep" BE layout,
and some of the properties of both. Point the various -r flags at this
new section, to help users understand which they're working with and
what the -r flag is actually doing. Note that we may just deprecate the
-r flag in future versions, but the flag will be recognized as a NOP at
that point.
Reviewed by: pauamma_gundo.com, rew
Differential Revision: https://reviews.freebsd.org/D34538
"ifconfig -g groupname" prints a list of interface names,
which could be confusing, because it differs from
the behavior of "ifconfig -a -g groupname".
While here, add two examples showing the difference between
"ifconfig -a -g groupname" and "ifconfig -g groupname".
Fixes: 0dad3f0e15 Import interface groups from OpenBSD.
MFC after: 2 weeks
This reference has been present in the manual page since the initial
import of BSD 4.4 Lite sbin Sources. It's time for it to be removed.
MFC after: 2 weeks
- Remove extraneous examples
- Apply "-compact" to the list macros so that it is possible to fit the
definitions of the types and formats in one terminal screen.
MFC after: 2 weeks
