This one is very hard to run into. If the filesystem is being unmounted or
the mount point is freed the vfs_op_thread_enter will fail. For it to
succeed the mount point itself would have to be reallocated in the time
window between the initial read and the attempt to enter.
Sponsored by: The FreeBSD Foundation
The breakage was added after all the testing and the testing which followed
was not sufficient to find it.
Reported by: pho
Sponsored by: The FreeBSD Foundation
There are 3 counters modified all the time in this structure - one for
keeping the structure alive, one for preventing unmount and one for
tracking active writers. Exact values of these counters are very rarely
needed, which makes them a prime candidate for conversion to a per-cpu
scheme, resulting in much better performance.
Sample benchmark performing fstatfs (modifying 2 out of 3 counters) on
a 104-way 2 socket Skylake system:
before: 852393 ops/s
after: 76682077 ops/s
Reviewed by: kib, jeff
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21637
New primitive is introduced to denote sections can operate locklessly
on aspects of struct mount, but which can also be disabled if necessary.
This provides an opportunity to start scaling common case modifications
while providing stable state of the struct when facing unmount, write
suspendion or other events.
mnt_ref is the first counter to start being managed in this manner with
the intent to make it per-cpu.
Reviewed by: kib, jeff
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21425
The initially read mount point can already be NULL.
Reported by: markj
Fixes: r351656 ("vfs: stop refing freed mount points in vop_stdgetwritemount")
Sponsored by: The FreeBSD Foundation
The code used blindly ref based on an unsafely red address and then would
backpedal if necessary. This was safe in terms of memory access since
mounts are type-stable, but made for a potential a bug where the mount
was reused and had the count reset to 0 before this code decreased it.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21411
vnode usecount drops to 0 all the time (e.g. for directories during path lookup).
When that happens the kernel would always lock the exclusive lock for the vnode
in order to call vinactive(). This blocks other threads who want to use the vnode
for looukp.
vinactive is very rarely needed and can be tested for without the vnode lock held.
This patch gives filesytems an opportunity to do it, sample total wait time for
tmpfs over 500 minutes of poudriere -j 104:
before: 557563641706 (lockmgr:tmpfs)
after: 46309603301 (lockmgr:tmpfs)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21371
Without this patch, when an application performed lseek(SEEK_DATA/SEEK_HOLE)
on a file in a file system that does not have its own VOP_IOCTL(), the
lseek(2) fails with errno ENOTTY. This didn't seem appropriate, since
ENOTTY is not listed as an error return by either the lseek(2) man page
nor the POSIX draft for lseek(2).
A discussion on freebsd-current@ seemed to indicate that implementing
a trivial algorithm that returns the offset argument for FIOSEEKDATA and
returns the file's size for FIOSEEKHOLE was the preferred fix.
http://docs.FreeBSD.org/cgi/mid.cgi?CAOtMX2iiQdv1+15e1N_r7V6aCx_VqAJCTP1AW+qs3Yg7sPg9wA
The Linux kernel appears to implement this trivial algorithm as well.
This patch adds a vop_stdioctl() that implements this trivial algorithm.
It returns errors consistent with vn_bmap_seekhole() and, as such, will
still return ENOTTY for non-regular files.
I have proposed a separate patch that maps errors not described by the
lseek(2) man page nor POSIX draft to EINVAL. This patch is under separate
review.
Reviewed by: kib
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D21299
Suppose that a binary was executed from tmpfs mount, and the text
vnode was reclaimed while the binary was still running. It is
possible during even the normal operations since tmpfs vnode'
vm_object has swap type, and no references on the vnode is held. Also
assume that the text vnode was revived for some reason. Then, on the
process exit or exec, unmapping of the text mapping tries to remove
the text reference from the vnode, but since it went from
recycle/instantiation cycle, there is no reference kept, and assertion
in VOP_UNSET_TEXT_CHECKED() triggers.
Fix this by keeping a use reference on the tmpfs vnode for each exec
reference. This prevents the vnode reclamation while executable map
entry is active.
Do it by adding per-mount flag MNTK_TEXT_REFS that directs
vop_stdset_text() to add use ref on first vnode text use, and
per-vnode VI_TEXT_REF flag, to record the need on unref in
vop_stdunset_text() on last vnode text use going away. Set
MNTK_TEXT_REFS for tmpfs mounts.
Reported by: bdrewery
Tested by: sbruno, pho (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This patch adds support to the kernel for a Linux compatible
copy_file_range(2) syscall and the related VOP_COPY_FILE_RANGE(9).
This syscall/VOP can be used by the NFSv4.2 client to implement the
Copy operation against an NFSv4.2 server to do file copies locally on
the server.
The vn_generic_copy_file_range() function in this patch can be used
by the NFSv4.2 server to implement the Copy operation.
Fuse may also me able to use the VOP_COPY_FILE_RANGE() method.
vn_generic_copy_file_range() attempts to maintain holes in the output
file in the range to be copied, but may fail to do so if the input and
output files are on different file systems with different _PC_MIN_HOLE_SIZE
values.
Separate commits will be done for the generated syscall files and userland
changes. A commit for a compat32 syscall will be done later.
Reviewed by: kib, asomers (plus comments by brooks, jilles)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D20584
The order is correct, it is nullfs vnode interlock -> lower vnode
interlock. vop_stdadd_writecount() is called from nullfs
VOP_ADD_WRITECOUNT() and both take interlocks.
Requested by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
kern_execve() locks text vnode exclusive to be able to set and clear
VV_TEXT flag. VV_TEXT is mutually exclusive with the v_writecount > 0
condition.
The change removes VV_TEXT, replacing it with the condition
v_writecount <= -1, and puts v_writecount under the vnode interlock.
Each text reference decrements v_writecount. To clear the text
reference when the segment is unmapped, it is recorded in the
vm_map_entry backed by the text file as MAP_ENTRY_VN_TEXT flag, and
v_writecount is incremented on the map entry removal
The operations like VOP_ADD_WRITECOUNT() and VOP_SET_TEXT() check that
v_writecount does not contradict the desired change. vn_writecheck()
is now racy and its use was eliminated everywhere except access.
Atomic check for writeability and increment of v_writecount is
performed by the VOP. vn_truncate() now increments v_writecount
around VOP_SETATTR() call, lack of which is arguably a bug on its own.
nullfs bypasses v_writecount to the lower vnode always, so nullfs
vnode has its own v_writecount correct, and lower vnode gets all
references, since object->handle is always lower vnode.
On the text vnode' vm object dealloc, the v_writecount value is reset
to zero, and deadfs vop_unset_text short-circuit the operation.
Reclamation of lowervp always reclaims all nullfs vnodes referencing
lowervp first, so no stray references are left.
Reviewed by: markj, trasz
Tested by: mjg, pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D19923
Provide a convenience function to avoid the hack with filling fake
struct vop_fsync_args and then calling vop_stdfsync().
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
POSIX_FADV_DONTNEED). The most broken case was for applications that
advise for the whole file and then do block-aligned i/o's 1 block at
a time. Then advice is sent to VOP_ADVISE() 1 block at a time, but
in vop_stdadvise() the 1-block advice was turned into 0-block advice
for the buffer cache part.
The bugs were caused partly by callers representing the region as
(a_start, a_end), where a_end is actually the maximum, and everything
else representing the region as (start, end) where 'end' is actually
the end (1 after the maximum). The maximum a_end must be rounded up,
but was rounded down. Also, rounding to page boundaries was inconsistent.
The bugs and fixes have no effect for zfs and other file systems that
don't use the buffer cache or the page cache. Most or all file systems
currently use the default VOP_FADVISE(), but it finds a null buffer cache
and a null page cache for file systems that don't use normal methods.
Reviewed by: kib
Use bypass to catch any NFS VOP dispatch and route it through the
wrapper which does sigdeferstop() and then dispatches original
VOP. NFS does not need a bypass below it, which is not supported.
The vop offset in the vop_vector is added since otherwise it is
impossible to get vop_op_t from the internal table, and I did not
wanted to create the layered fs only to wrap NFS VOPs.
VFS_OP()s wrap is straightforward.
Requested and reviewed by: mjg (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D17658
The interlock pointer is non-NULL by definition and the compiler see through
that and eliminates the NULL checks. Just remove them from the code as they
play no role.
No difference in generated assembly.
appeared on UFS/FFS filesystems. In some cases it was promptly followed
by a panic of "softdep_deallocate_dependencies: dangling deps". This fix
should eliminate both of these occurences.
Submitted by: Andreas Longwitz <longwitz at incore.de>
Reviewed by: kib
Tested by: Peter Holm (pho)
PR: 225423
MFC after: 1 week
On the one hand, FIFOs should respect other variables not supported by
the fifofs vnode operation (such as _PC_NAME_MAX, _PC_LINK_MAX, etc.).
These values are fs-specific and must come from a fs-specific method.
On the other hand, filesystems that support FIFOs are required to
support _PC_PIPE_BUF on directory vnodes that can contain FIFOs.
Given this latter requirement, once the fs-specific VOP_PATHCONF
method supports _PC_PIPE_BUF for directories, it is also suitable for
FIFOs permitting a single VOP_PATHCONF method to be used for both
FIFOs and non-FIFOs.
To that end, retire all of the FIFO-specific pathconf methods from
filesystems and change FIFO-specific vnode operation switches to use
the existing fs-specific VOP_PATHCONF method. For fifofs, set it's
VOP_PATHCONF to VOP_PANIC since it should no longer be used.
While here, move _PC_PIPE_BUF handling out of vop_stdpathconf() so that
only filesystems supporting FIFOs will report a value. In addition,
only report a valid _PC_PIPE_BUF for directories and FIFOs.
Discussed with: bde
Reviewed by: kib (part of a larger patch)
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D12572
Having all filesystems fall through to default values isn't always correct
and these values can vary for different filesystem implementations. Most
of these changes just use the existing default values with a few exceptions:
- Don't report CHOWN_RESTRICTED for ZFS since it doesn't do the exact
permissions check this claims for chown().
- Use NANDFS_NAME_LEN for NAME_MAX for nandfs.
- Don't report a LINK_MAX of 0 on smbfs. Now fail with EINVAL to
indicate hard links aren't supported.
Requested by: bde (though perhaps not this exact implementation)
Reviewed by: kib (earlier version)
MFC after: 1 month
Sponsored by: Chelsio Communications
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Move handling of these three pathconf() variables out of vop_stdpathconf()
and into devfs_pathconf() as TTY devices can only be devfs files. In
addition, only return settings for these three variables for devfs devices
whose device switch has the D_TTY flag set.
Discussed with: bde, kib
Sponsored by: Chelsio Communications
reviewing all uses of OFF_TO_IDX(), I observed that
vm_object_page_noreuse() is requiring an exclusive lock on the object
when, in fact, a shared lock suffices.
Reviewed by: kib, markj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D10011
then return EAGAIN. The current code just returns that if the LAST buf
failed.
Reviewed by: kib@, trasz@
Differential Revision: https://reviews.freebsd.org/D9677
The main lockmgr routine takes 8 arguments which makes it impossible to
tail-call it by the intermediate vop_stdlock/unlock routines.
The routine itself starts with an if-forest and reads from the lock itself
several times.
This slows things down both single- and multi-threaded. With the patch
single-threaded fstats go 4% up and multithreaded up to ~27%.
Note that there is still a lot of room for improvement.
Reviewed by: kib
Tested by: pho
Right now size of the structure is 472 bytes on amd64, which is
already large and stack allocations are indesirable. With the ino64
work, MNAMELEN is increased to 1024, which will make it impossible to have
struct statfs on the stack.
Extracted from: ino64 work by gleb
Discussed with: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Standard VOP_FSYNC() implementation just syncs data buffers, and due
to this, is the correct and efficient implementation for msdosfs or
any other filesystem which uses bufer cache trivially. Provide
globally visible wrapper vop_stdfdatasync_buf() for future consumption
by other filesystems.
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D7471
The syscall is a trivial wrapper around new VOP_FDATASYNC(), sharing
code with fsync(2). For all filesystems, this commit provides the
implementation which delegates the work of VOP_FDATASYNC() to
VOP_FSYNC(). This is functionally correct but not efficient.
This is not yet POSIX-compliant implementation, because it does not
ensure that queued AIO requests are completed before returning.
Reviewed by: mckusick
Discussed with: avg (ZFS), jhb (AIO part)
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D7471
- Mark AIO system calls as STD and remove the helpers to dynamically
register them.
- Use COMPAT6 for the old system calls with the older sigevent instead of
an 'o' prefix.
- Simplify the POSIX configuration to note that AIO is always available.
- Handle AIO in the default VOP_PATHCONF instead of special casing it in
the pathconf() system call. fpathconf() is still hackish.
- Remove freebsd32_aio_cancel() as it just called the native one directly.
Reviewed by: kib
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D5589
Advance the logical block number to the lblkno of the found block plus
one, instead of incrementing the block number which was used for
lookup. This change skips sparcely populated buffer ranges, similar
to r292325, instead of doing useless lookups.
Do not restart the bnoreuselist() from the start of the range if
buffer lock cannot be obtained without sleep. Only retry lookup and
lock for the same queue and same logical block number.
Reported by: benno
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
o With new KPI consumers can request contiguous ranges of pages, and
unlike before, all pages will be kept busied on return, like it was
done before with the 'reqpage' only. Now the reqpage goes away. With
new interface it is easier to implement code protected from race
conditions.
Such arrayed requests for now should be preceeded by a call to
vm_pager_haspage() to make sure that request is possible. This
could be improved later, making vm_pager_haspage() obsolete.
Strenghtening the promises on the business of the array of pages
allows us to remove such hacks as swp_pager_free_nrpage() and
vm_pager_free_nonreq().
o New KPI accepts two integer pointers that may optionally point at
values for read ahead and read behind, that a pager may do, if it
can. These pages are completely owned by pager, and not controlled
by the caller.
This shifts the UFS-specific readahead logic from vm_fault.c, which
should be file system agnostic, into vnode_pager.c. It also removes
one VOP_BMAP() request per hard fault.
Discussed with: kib, alc, jeff, scottl
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
buffer for each block number in the range with gbincore(), look up the
next instantiated buffer with the logical block number which is
greater or equal to the next lblkno. This significantly speeds up the
iteration for sparce-populated range.
Move the iteration into new helper bnoreuselist(), which is structured
similarly to flushbuflist().
Reported and tested by: pho
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
of POSIX_FADV_DONTNEED so that it causes the backing pages to be moved to
the head of the inactive queue instead of being cached.
This affects the implementation of POSIX_FADV_NOREUSE as well, since it
works by applying POSIX_FADV_DONTNEED to file ranges after they have been
read or written. At that point the corresponding buffers may still be
dirty, so the previous implementation would coalesce successive ranges and
apply POSIX_FADV_DONTNEED to the result, ensuring that pages backing the
dirty buffers would eventually be cached. To preserve this behaviour in an
efficient manner, this change adds a new buf flag, B_NOREUSE, which causes
the pages backing a VMIO buf to be placed at the head of the inactive queue
when the buf is released. POSIX_FADV_NOREUSE then works by setting this
flag in bufs that underlie the specified range.
Reviewed by: alc, kib
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D3726
locks/unlocks the vnode and does a VOP_GETATTR()
for the SEEK_END case. This is safe to do, since
lf_advlock{async}() only uses the size argument
for the SEEK_END case.
The NFSv4 server needs this when
vfs.nfsd.enable_locallocks!=0 since locking the
vnode results in a LOR that can cause a deadlock
for the nfsd threads.
Reviewed by: kib
MFC after: 1 week
o Provide a new VOP_GETPAGES_ASYNC(), which works like VOP_GETPAGES(), but
doesn't sleep. It returns immediately, and will execute the I/O done handler
function that must be supplied as argument.
o Provide VOP_GETPAGES_ASYNC() for the FFS, which uses vnode_pager.
o Extend pagertab to support pgo_getpages_async method, and implement this
method for vnode_pager.
Reviewed by: kib
Tested by: pho
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
- Use a shared bufobj lock in getblk() and inmem().
- Convert softdep's lk to rwlock to match the bufobj lock.
- Move INFREECNT to b_flags and protect it with the buf lock.
- Remove unnecessary locking around bremfree() and BKGRDINPROG.
Sponsored by: EMC / Isilon Storage Division
Discussed with: mckusick, kib, mdf
future further optimizations where the vm_object lock will be held
in read mode most of the time the page cache resident pool of pages
are accessed for reading purposes.
The change is mostly mechanical but few notes are reported:
* The KPI changes as follow:
- VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK()
- VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK()
- VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK()
- VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED()
(in order to avoid visibility of implementation details)
- The read-mode operations are added:
VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(),
VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED()
* The vm/vm_pager.h namespace pollution avoidance (forcing requiring
sys/mutex.h in consumers directly to cater its inlining functions
using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h
consumers now must include also sys/rwlock.h.
* zfs requires a quite convoluted fix to include FreeBSD rwlocks into
the compat layer because the name clash between FreeBSD and solaris
versions must be avoided.
At this purpose zfs redefines the vm_object locking functions
directly, isolating the FreeBSD components in specific compat stubs.
The KPI results heavilly broken by this commit. Thirdy part ports must
be updated accordingly (I can think off-hand of VirtualBox, for example).
Sponsored by: EMC / Isilon storage division
Reviewed by: jeff
Reviewed by: pjd (ZFS specific review)
Discussed with: alc
Tested by: pho
directory entry, matched by the inode number, is ".".
NFSv4 client might instantiate the distinct vnodes which have the same
inode number, since single v4 export can be combined from several
filesystems on the server. For instance, a case when the nested
server mount point is exactly one directory below the top of the
export, causes directory and its parent to have the same inode number
2. The vop_stdvptocnp() algorithm then returns "." as the name of the
lower directory.
Filtering out the "." entry with ENOENT works around this behaviour,
the error forces getcwd(3) to fall back to usermode implementation,
which compares both st_dev and st_ino.
Based on the submission by: rmacklem
Tested by: rmacklem
MFC after: 1 week
was still possible to open for write from the lower filesystem. There
is a symmetric situation where the binary could already has file
descriptors opened for write, but it can be executed from the nullfs
overlay.
Handle the issue by passing one v_writecount reference to the lower
vnode if nullfs vnode has non-zero v_writecount. Note that only one
write reference can be donated, since nullfs only keeps one use
reference on the lower vnode. Always use the lower vnode v_writecount
for the checks.
Introduce the VOP_GET_WRITECOUNT to read v_writecount, which is
currently always bypassed to the lower vnode, and VOP_ADD_WRITECOUNT
to manipulate the v_writecount value, which manages a single bypass
reference to the lower vnode. Caling the VOPs instead of directly
accessing v_writecount provide the fix described in the previous
paragraph.
Tested by: pho
MFC after: 3 weeks
