In pmap_ts_referenced we read the virtual address from pv->pv_va,
but then continue to use the pv struct to get the same value later
in the function.
Use the virtual address value we initially read rather than loading
from the pv struct each time.
The header exports the following:
- Definition of struct tcb.
- Helpers to get/set the tcb for the current thread.
- TLS_TCB_SIZE (size of TCB)
- TLS_TCB_ALIGN (alignment of TCB)
- TLS_VARIANT_I or TLS_VARIANT_II
- TLS_DTV_OFFSET (bias of pointers in dtv[])
- TLS_TP_OFFSET (bias of "thread pointer" relative to TCB)
Note that TLS_TP_OFFSET does not account for if the unbiased thread
pointer points to the start of the TCB (arm and x86) or the end of the
TCB (MIPS, PowerPC, and RISC-V).
Note also that for amd64, the struct tcb does not include the unused
tcb_spare field included in the current structure in libthr. libthr
does not use this field, and the existing calls in libc and rtld that
allocate a TCB for amd64 assume it is the size of 3 Elf_Addr's (and
thus do not allocate room for tcb_spare).
A <sys/_tls_variant_i.h> header is used by architectures using
Variant I TLS which uses a common struct tcb.
Reviewed by: kib (older version of x86/tls.h), jrtc27
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33351
Use nitems instead and just use a magic `8` for the size of the args
array. MAXARGS was rarely used (only in arm64 code) and is an overly
generic name to polute the namespace with.
Requested by: kib in D33308
After a round of cleanups in late 2020, all definitions are
functionally identical.
This removes a rotted __aligned(8) on arm. It was added in
b7112ead32 and was intended to align the
args member so that 64-bit types (off_t, etc) could be safely read on
armeb compiled with clang. With the removal of armev, this is no
longer needed (armv7 requires that 32-bit aligned reads of 64-bit
values be supported and we enable such support on armv6). As further
evidence this is unnecessary, cleanups to struct syscall_args have
resulted in args being 32-bit aligned on 32-bit systems. The sole
effect is to bloat the struct by 4 bytes.
Reviewed by: kib, jhb, imp
Differential Revision: https://reviews.freebsd.org/D33308
When getting the arm64 kernel maps sysctl we should look at the table
attributes as well as the block/page attributes. These attributes are
different to the last level attributes so need to be translated.
The previous code assumed the table and block/page attributes are
identical, however this is not the case. Handle the difference by
extracting the code into new helper functions & calling them as needed
based on the entry type being checked.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33321
The arm64 vm.pmap.kernel_maps sysctl would only check the kernel XN bit
when printing the kernel mapping. It can also be useful to check none
of the mappings allow userspace to execute from a given virtual address.
To check for this add the user XN bit when getting the kernel maps.
While here fix the ATTR_S1_AP_USER check to use ATTR_S1_AP to shift the
value to the correct offset.
Reviewed by: kib (earlier version), markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33304
We do not consider the space reserved for the pcb to be part of the
total kstack size, so it should not be included in the calculation of
the used stack size.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
With the update to llvm 13 we are able to tell the compiler it can find
the SSP canary relative to the register that holds the userspace stack
pointer. As this is unused in most of the kernel it can be used here
to point to a per-thread SSP canary.
As the kernel could be built with an old toolchain, e.g. when upgrading
from 13, add a warning that the options was enabled but the compiler
doesn't support it to both the build and kernel boot.
Discussed with: emaste
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33079
in_cksum() and related routines are implemented separately for each
platform, but only i386 and arm have optimized versions. Other
platforms' copies of in_cksum.c are identical except for style
differences and support for big-endian CPUs.
Deduplicate the implementations for the rest of the platforms. This
will make it easier to implement in_cksum() for unmapped mbufs. On arm
and i386, define HAVE_MD_IN_CKSUM to mean that the MI implementation is
not to be compiled.
No functional change intended.
Reviewed by: kp, glebius
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33095
When building with gcc10 it suggests the parentheses are wrong. Set them
to be the calculated physical address or'd with page table attributes.
Reviewed by: mhorne, imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33099
Add driver for pcf85063 real time clock. Register set and get time
methods. Parse data obtained from bus according to specification
and fill kernel structures.
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential revision: https://reviews.freebsd.org/D32817
Driver for tca6408 gpio expander over i2c bus. Expose API for
manipulating pin's direction, state and polarity inversion.
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential revision: https://reviews.freebsd.org/D32819
Make sys/reg.h includable on aarch64 by making machine/reg.h
self-contained: Include sys/_types.h and use __uint* instead of uint*.
Sponsored by: Netflix
It is used by late ifunc resolvers so needs to be at an earlier stage
of the boot. Previously it was at the same stage so may not have run
before the ifunc resolvers.
Sponsored by: The FreeBSD Foundation
When constructing the set of dumpable pages, use the bitset provided by
the state argument, rather than assuming vm_page_dump invariably. For
normal kernel minidumps this will be a pointer to vm_page_dump, but when
dumping the live system it will not.
To do this, the functions in vm_dumpset.h are extended to accept the
desired bitset as an argument. Note that this provided bitset is assumed
to be derived from vm_page_dump, and therefore has the same size.
Reviewed by: kib, markj, jhb
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D31992
Don't assume we are dumping the global message buffer, but use the one
provided by the state argument. While here, drop superfluous
cast to char *.
Reviewed by: markj, jhb
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D31991
During a live dump, we may race with updates to the kernel page tables.
This is generally okay; we accept that the state of the system while
dumping may be somewhat inconsistent with its state when the dump was
invoked. However, when walking the kernel page tables, it is important
that we load each PDE/PTE only once while operating on it. Otherwise, it
is possible to have the relevant PTE change underneath us. For example,
after checking the valid bit, but before reading the physical address.
Convert the loads to atomics, and add some validation around the
physical addresses, to ensure that we do not try to dump a non-existent
or non-canonical physical address.
Similarly, don't read kernel_vm_end more than once, on the off chance
that pmap_growkernel() is called between the two page table walks.
Reviewed by: kib, markj
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D31990
The minidump code is written assuming that certain global state will not
change, and rightly so, since it executes from a kernel debugger
context. In order to support taking minidumps of a live system, we
should allow copies of relevant global state that is likely to change to
be passed as parameters to the minidumpsys() function.
This patch does the work of parameterizing this function, by adding a
struct minidumpstate argument. For now, this struct allows for copies of
the kernel message buffer, and the bitset that tracks which pages should
be dumped (vm_page_dump). Follow-up changes will actually make use of
these arguments.
Notably, dump_avail[] does not need a snapshot, since it is not expected
to change after system initialization.
The existing minidumpsys() definitions are renamed, and a thin MI
wrapper is added to kern_dump.c, which handles the construction of
the state struct. Thus, calling minidumpsys() remains as simple as
before.
Reviewed by: kib, markj, jhb
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D31989
pipe requires no special handling.
ofreebsd32_sigpending did differ from osigpending in that it acted
on the siglist rather than the sigqueue, but this appears to be an
oversight in 3fbdb3c215.
ogetpagesize could theoretically have ABI-dependent results, but in
practice does not. If it does it would be easy handle in the central
implementation and be the least of the problems in changing the value of
PAGE_SIZE.
Reviewed by: kevans
Define CC_NEWRENO in all the appropriate DEFAULTS and std.* config
files. It's the default congestion control algorithm. Add code to cc.c
so that CC_DEFAULT is "newreno" if it's not overriden in the config
file.
Sponsored by: Netflix
Fixes: b8d60729de ("tcp: Congestion control cleanup.")
Revired by: manu, hselasky, jhb, glebius, tuexen
Differential Revision: https://reviews.freebsd.org/D32964
NOTE: HEADS UP read the note below if your kernel config is not including GENERIC!!
This patch does a bit of cleanup on TCP congestion control modules. There were some rather
interesting surprises that one could get i.e. where you use a socket option to change
from one CC (say cc_cubic) to another CC (say cc_vegas) and you could in theory get
a memory failure and end up on cc_newreno. This is not what one would expect. The
new code fixes this by requiring a cc_data_sz() function so we can malloc with M_WAITOK
and pass in to the init function preallocated memory. The CC init is expected in this
case *not* to fail but if it does and a module does break the
"no fail with memory given" contract we do fall back to the CC that was in place at the time.
This also fixes up a set of common newreno utilities that can be shared amongst other
CC modules instead of the other CC modules reaching into newreno and executing
what they think is a "common and understood" function. Lets put these functions in
cc.c and that way we have a common place that is easily findable by future developers or
bug fixers. This also allows newreno to evolve and grow support for its features i.e. ABE
and HYSTART++ without having to dance through hoops for other CC modules, instead
both newreno and the other modules just call into the common functions if they desire
that behavior or roll there own if that makes more sense.
Note: This commit changes the kernel configuration!! If you are not using GENERIC in
some form you must add a CC module option (one of CC_NEWRENO, CC_VEGAS, CC_CUBIC,
CC_CDG, CC_CHD, CC_DCTCP, CC_HTCP, CC_HD). You can have more than one defined
as well if you desire. Note that if you create a kernel configuration that does not
define a congestion control module and includes INET or INET6 the kernel compile will
break. Also you need to define a default, generic adds 'options CC_DEFAULT=\"newreno\"
but you can specify any string that represents the name of the CC module (same names
that show up in the CC module list under net.inet.tcp.cc). If you fail to add the
options CC_DEFAULT in your kernel configuration the kernel build will also break.
Reviewed by: Michael Tuexen
Sponsored by: Netflix Inc.
RELNOTES:YES
Differential Revision: https://reviews.freebsd.org/D32693
Print the device/unit in the panic message for which we cannot get
the MSI device ID to have a clue where to start looking.
While here use __func__ instead of hardcoding the function name.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D32917
This moves linux_ptrace.c from sys/amd64/linux/ to sys/compat/linux/,
making it possible to use it on architectures other than amd64.
It also enables Linux ptrace(2) on arm64.
Relnotes: yes
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D32868
On my Rock64 neither EFI nor PSCI shutdown actually power off the board.
RK805 does the job.
Reviewed by: manu, peterj
Differential Revision: https://reviews.freebsd.org/D30786
According to Linux code the new value should correspond to 0dB gain
while the original value corresponded to 6dB gain which may be
uncomfortable for some output types.
MFC after: 1 month
The previous value contained only the mask bit ("twice"),
but not the value bit.
While here, make a couple of lines a little bit prettier.
MFC after: 1 month
Not sure why these haven't been committed with the rest of the SoC Audio
project. They work sufficiently well for me.
Discussed with: manu
MFC after: 1 month
It adds the PIC functionality on top of qoriq_gpio driver.
We need a separate module since the powerpc PIC API is completely
different than on other architectures.
Two types of intr_map_data are supported:
INTR_MAP_DATA_GPIO and INTR_MAP_DATA_FDT.
This way interrupts can be allocated using the userspace gpio
interrupt allocation method, as well as directly from simplebus.
The latter can be used by devices that have its irq routed to a GPIO pin.
Obtained from: Semihalf
Sponsored by: Alstom Group
sched_throw() can no longer take a NULL thread, APs enter through
sched_ap_entry() instead. This completely removes branching in the
common case and cleans up both paths. No functional change intended.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D32829
schedinit_ap() sets up an AP for a later call to sched_throw(NULL).
Currently, ULE sets up some pcpu bits and fixes the idlethread lock with
a call to sched_throw(NULL); this results in a window where curthread is
setup in platforms' init_secondary(), but it has the wrong td_lock.
Typical platform AP startup procedure looks something like:
- Setup curthread
- ... other stuff, including cpu_initclocks_ap()
- Signal smp_started
- sched_throw(NULL) to enter the scheduler
cpu_initclocks_ap() may have callouts to process (e.g., nvme) and
attempt to sched_add() for this AP, but this attempt fails because
of the noted violated assumption leading to locking heartburn in
sched_setpreempt().
Interrupts are still disabled until cpu_throw() so we're not really at
risk of being preempted -- just let the scheduler in on it a little
earlier as part of setting up curthread.
Reviewed by: alfredo, kib, markj
Triage help from: andrew, markj
Smoke-tested by: alfredo (ppc), kevans (arm64, x86), mhorne (arm)
Differential Revision: https://reviews.freebsd.org/D32797
In 7ec86b6609 ("Also print symbols when printing arm64 registers")
a new function was created to print most registers. Unfortunately the
Link Register (LR) was being printed when we should have printed the
Exception Link Register (ELR).
Fix this by adding the missing 'e'.
Sponsored by: The FreeBSD Foundation
