Nanopi4 based SoCs (NanoPC-T4, NanoPi M4*, and NanoPi Neo4) have
assigned-clock* in the pcie_phy node. Handle them but only fail
in case clk_set_assigned() returns an error other than
"no assigned-clock*" (as it would for all other SoCs).
Reviewed by: manu
MFC After: 2 weeks
Differential Revision: https://reviews.freebsd.org/D30363
The flag values seem to be the same between Linux and FreeBSD.
Comparing to a Linux VM on the same hardware, we're missing
HWCAP_EVTSTRM, HWCAP_CPUID, HWCAP_DCPOP, HWCAP_USCAT, HWCAP_PACA,
and HWCAP_PACG.
Reviewed By: mhorne, emaste
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D30540
Previously it would return "arm64", which was breaking build
for Linux kernel. While here, reshuffle entries in the auxv
vector to match real Linux.
Reviewed By: emaste
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D30500
o Fix slave address setting.
This allows to read the EDID from an HDMI monitor.
Reviewed by: manu
Sponsored by: UKRI
Differential Revision: https://reviews.freebsd.org/D27139
Summary:
Log the vm_fault() error in the data_abort panic so it is easier to
find the reason vm_fault() failed (e.g., invalid address).
Reviewed by: andrew
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D30362
Early in the arm64 pmap code we need to translate between a virtual
address and a physical address. Rather than manually walking the page
table we can ask the hardware to do it for us.
Reviewed by: kib, markj
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D30357
By default name the gpio P<bank><bankpin>
This make it easier to find the gpio when reading schematics or DTS.
Sponsored by: Diablotin Systems
Differential Revision: https://reviews.freebsd.org/D30287
It's a class0 driver that implements some pcib methods and creates
a pci bus as its children.
The "ofw_pci" name will be used by a new driver that will be a subclass
of the pci bus.
No functional changes intended.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: andrew
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30226
While here, fix all links to older en_US.ISO8859-1 documentation
in the src/ tree.
PR: 255026
Reported by: Michael Büker <freebsd@michael-bueker.de>
Reviewed by: dbaio
Approved by: blackend (mentor), re (gjb)
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D30265
While the xin32k clk was implemented in rk3399_cru as a fixed rate
clock, migrate it to rk805 as we will also need the 2nd clock
'rtc_clko_wifi' for SDIO and BT.
Both clocks remain fixed rate, and while the 1st one is always on
(though that is not expressed in the clk framework), the 2nd one
we can toggle on/off.
Reviewed-by: manu
Tested-by: manu
MFC-after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D26870
Enabled driver initialization causes an abort
on the NXP LS1028ARDB platform (without any external
endpoints connected). Temporarily disable qoriq_dw_pci
probe, so that to allow successful booting of the OS.
Submitted by: Lukasz Hajec <lha@semihalf.com>
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30229
The new driver provides probe and attach functions for the NXP LS1028A
clockgen and passes configuration information to QorIQ clockgen class.
Submitted by: Lukasz Hajec <lha@semihalf.com>
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30125
Not all interrupt controllers enable IPIs by default as the Arm
GIC specs make it an implementation defined option. As at least two
hypervisors have also previously masked the IPIs on boot.
As we already enable these IPIs on the non-boot CPUs it is expected
this is a safe operation.
Differential Revision: https://reviews.freebsd.org/D26975
This will allow us to allocate an unmapped memory resource, then
later map it with a specific memory attribute.
This is also needed for virtio with the modern PCI attachment.
Reviewed by: kib (via D29723)
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D29694
It is defined as a uint64_t in the UEFI spec. As it's not used as a
pointer by the kernel follow this and define it as the same in the
kernel.
Reviewed by: kib, manu, imp
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D29759
On arm64 we currently use a non-posted write for device memory, however
we should move to use posted writes. This is expected to work on most
hardware, however we will need to support a non-posted option for some
broken hardware.
Reviewed by: imp, manu, bcr (manpage)
Differential Revision: https://reviews.freebsd.org/D29722
It has to be zeroed before committing it to device.
We do that by allocating it with M_ZERO, but there was no
memory barrier or cache flush to ensure its sees it zeroed.
This fixes MSIX on LS1028A SoC.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: andrew
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30033
Option `FIB_ALGO` gates new modular fib lookup functionality,
enabling more performant routing table lookups and improving
control plane convergence under the load.
Detailed feature description is available in D27401.
Reviewed By: olivier, gnn
Differential Revision: https://reviews.freebsd.org/D28434
These comments were copied from dbg_monitor_enter(), but the intended
modifications weren't made. Update them to reflect what this code
actually does.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
This is both intuitive and required, as any previous breakpoint settings
may not be applicable to the new process.
Reported by: arichardson
Reviewed by: kib
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29672
Following the analogous change for amd64 and i386 in 8223717ce6,
ensure that new processes start with these registers inactive.
PR: 254661
Reported by: Michał Górny
Reviewed by: kib, emaste
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29630
When resetting the VFP state we need to discard any old state so we don't
try to save it on a context switch. Move this first so resetting the pcb
is safe to perform outside a critical section.
Reviewed by: arichardson
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D29401
On some systems (e.g. Lenovo ThinkPad X240, Apple MacBookPro12,1)
the SMBIOS entry point is not found in the <0xFFFFF space.
Follow the SMBIOS spec and use the EFI Configuration Table for
locating the entry point on EFI systems.
Reviewed by: rpokala, dab
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D29276
Summary:
They're nearly identical, so don't use two copies. Merge the newer
driver into the older one, and move it to a common location.
Add the Semihalf and associated copyrights in addition to mine, since
it's a non-trivial amount of code merged.
Reviewed By: mw
Differential Revision: https://reviews.freebsd.org/D29520
The remote protocol allows for implementations to report more specific
reasons for the break in execution back to the client [1]. This is
entirely optional, so it is only implemented for amd64, arm64, and i386
at the moment.
[1] https://sourceware.org/gdb/current/onlinedocs/gdb/Stop-Reply-Packets.html
Reviewed by: jhb
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
NetApp PR: 51
Differential Revision: https://reviews.freebsd.org/D29174
Handle the 'z' and 'Z' remote packets for manipulating hardware
watchpoints.
This could be expanded quite easily to support hardware or software
breakpoints as well.
https://sourceware.org/gdb/onlinedocs/gdb/Packets.html
Reviewed by: cem, markj
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
NetApp PR: 51
Differential Revision: https://reviews.freebsd.org/D29173
Use the new kdb variants. Print more specific error messages.
Reviewed by: jhb, markj
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D29156
Add wrappers around the debug_monitor interface, to be consumed by MI
kernel debugger code. Update dbg_setup_watchpoint() and
dbg_remove_watchpoint() to return specific error codes, not just -1.
Reviewed by: jhb, kib, markj
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D29155
This change serves two purposes.
First, we take advantage of the compiler provided endian definitions to
eliminate some long-standing duplication between the different versions
of this header. __BYTE_ORDER__ has been defined since GCC 4.6, so there
is no need to rely on platform defaults or e.g. __MIPSEB__ to determine
endianness. A new common sub-header is added, but there should be no
changes to the visibility of these definitions.
Second, this eliminates the hand-rolled __bswapNN() routines, again in
favor of the compiler builtins. This was done already for x86 in
e6ff6154d2. The benefit here is that we no longer have to maintain our
own implementations on each arch, and can instead rely on the compiler
to emit appropriate instructions or libcalls, as available. This should
result in equivalent or better code generation. Notably 32-bit arm will
start using the `rev` instruction for these routines, which is available
on armv6+.
PR: 236920
Reviewed by: arichardson, imp
Tested by: bdragon (BE powerpc)
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D29012
Make it easy to define interceptors for new sanitizer runtimes, rather
than assuming KCSAN. Lay a bit of groundwork for KASAN and KMSAN.
When a sanitizer is compiled in, atomic(9) and bus_space(9) definitions
in atomic_san.h are used by default instead of the inline
implementations in the platform's atomic.h. These definitions are
implemented in the sanitizer runtime, which includes
machine/{atomic,bus}.h with SAN_RUNTIME defined to pull in the actual
implementations.
No functional change intended.
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
e4b8deb222 removed the last in-tree uses of PCPU_INC(). Its
potential benefit is also practically nonexistent. Non-x86
platforms already implement it as PCPU_ADD(..., 1), and according
to [0] there are no recent x86 processors for which the 'inc'
instruction provides a performance benefit over the equivalent
memory-operand form of the 'add' instruction. The only remaining
benefit of 'inc' is smaller instruction size, which in this case
is inconsequential given the limited number of per-CPU data consumers.
[0]: https://www.agner.org/optimize/instruction_tables.pdf
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D29308
TCP/IPv6 packets to be forwarded can be laid out with only the Ethernet
header in the first mbuf, and these packets are lost. There was a
previous hack to pullup ICMPv6 packets with such a layout for the
same reason. Generalize, and pullup any IPv6 packets with only the
Ethernet header in the first mbuf. Possibly this should also include
IPv4, but that situation has not been observed to fail.
PR: 254060
Reported by: denis at h3q.com
MFC after: 3 days
On FreeBSD/arm fill_fpregs, fill_dbregs are stubs that zero the reg
struct and return success. set_fpregs and set_dbregs do nothing and
return success.
Provide the same implementation for arm64 COMPAT_FREEBSD32.
Reviewed by: andrew
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29314
These are not stored in the trapframe so must be cleared explicitly.
This is similar to one of the MIPS changes in 822d2d6ac9.
Reviewed by: andrew
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D28711
Implement a driver for the RTC embedded in the RK805/RK808 power
management system used for RK3328 and RK3399 SoCs.
Based on experiments on my RK808, setting the time doesn't alter the
internal/inaccessible sub-second counter, therefore there's no point
in calling clock_schedule().
Based on an earlier revision by andrew.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D22692
Sponsored by: Google
MFC after: 1 week
The ENTRY() macro was modified by commit
28d945204e to add an optional NOP instruction
at the beginning of the function. It is of course an arm64 instruction, so
unsuitable for the 32bits sigcode. So just use EENTRY() instead for
aarch32_sigcode. This should fix receiving signals when running 32bits
binaries on FreeBSD/arm64.
MFC After: 1 week
I noticed that many of the math-related tests were failing on AArch64.
After a lot of debugging, I noticed that the floating point exception flags
were not being reset when starting a new process. This change resets the
VFP inside exec_setregs() to ensure no VFP register state is leaked from
parent processes to children.
This commit also moves the clearing of fpcr that was added in 65618fdda0
from fork() to execve() since that makes more sense: fork() can retain
current register values, but execve() should result in a well-defined
clean state.
Reviewed By: andrew
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D29060
Other kernel sanitizers (KMSAN, KASAN) require interceptors as well, so
put these in a more generic place as a step towards importing the other
sanitizers.
No functional change intended.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29103
In 48ba9b2669 we switched from creating level 1 blocks to smaller
level 2 blocks when creating the early arm64 page tables. On issue
was that they had a different meaning for register x7. The former used
it to hold page table attributes, while the latter held just the memory
type. This caused these attributes to be incorrectly shifted.
Fix this by changing the meaning of x7 to hold the block attributes
and fix the only caller that used the old meaning.
Most hardware seems to have handled the bits being off however qemu
failed to boot as reserved bits that should be zero were being set and
qemu fails to clear these when translating from a virtual address to a
physical address.
Sponsored by: Innovate UK
To trace leaf asm functions we can insert a single nop instruction as
the first instruction in a function and trigger off this.
Reviewed by: gnn
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D28132
This reduces the memory mapped to be closer to the minimal memory
needed to enable the MMU.
Reviewed by: mmel
Sponsored by: Innovate UK
Differential Revision:://reviews.freebsd.org/D27765
This flag has been set on startup since 65618fdda0.
However, This causes some of the math-related tests to fail as they report
zero instead of a tiny number. This fixes at least
/usr/tests/lib/msun/ldexp_test and possibly others.
Additionally, setting this flag prevents printf() from printing subnormal
numbers in decimal form.
See also https://www.openwall.com/lists/musl/2021/02/26/1
PR: 253847
Reviewed By: mmel
Differential Revision: https://reviews.freebsd.org/D28938
arm64 has a distinct exception code for single-step, so we can use this
to detect when an unexpected SS trap is encountered, or when an expected
one is not. See db_stop_at_pc().
Reviewed by: markj, jhb
MFC after: 5 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28942
This value should be kept in sync with updates to kdb_frame->tf_elr,
since it is queried by PC_REGS() in several places.
Reviewed by: markj, jhb
MFC after: 5 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28943
The main issue is that debug exceptions must to be disabled for the
entire duration that SS bit in MDSCR_EL1 is set. Otherwise, a
single-step exception will be generated immediately. This can occur
before returning from the debugger (when MDSCR is written to) or before
re-entering it after the single-step (when debug exceptions are unmasked
in the exception handler).
Solve this by delaying the unmask to C code for EL1, and avoid unmasking
at all while handling debug exceptions, thus avoiding any recursive
debug traps.
Reviewed by: markj, jhb
MFC after: 5 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28944
The scheduler uses this topology to try and preserve locality when
migrating threads between CPUs and when performing work stealing.
Ensure that on NUMA systems it will at least take the NUMA topology into
account.
Reviewed by: mmel
Submitted by: Klara, Inc.
Sponsored by: Ampere Computing
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28579
This macro returns true if a provided virtual address is contained
in the kernel's clean submap.
In CHERI kernels, the buffer cache and transient I/O map are allocated
as separate regions. Abstracting this check reduces the diff relative
to FreeBSD. It is perhaps slightly more readable as well.
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D28710
ACPI Sec 5.2.16.5 (SRAT, GIC Interrupt Translation Service (ITS)
Affinity Structure) says:
> The GIC ITS Affinity Structure provides the association between
> a GIC ITS and a proximity domain. This enables the OSPM to
> discover the memory that is closest to the ITS, and use that in
> allocating its management tables and command queue.
Previously the ITS driver was using the proximity domain to
restrict which CPUs can be targeted by an LPI. We keep that logic
just for the original dual socket ThunderX which cannot forward
LPIs between sockets.
We also use the SRAT entry for its intended purpose of attempting
to allocate ITS table structures near the ITS.
Reviewed by: andrew
Sponsored by: Ampere Computing LLC
Differential Revision: https://reviews.freebsd.org/D28340
This follows the behavior on x86 where edge triggered interrupts are
not disabled when executing the handler. Because the ITS is a shared
resource, contention for the command queue lock can be substantial.
Suggested by: gallatin
Reviewed by: andrew
Tested by: gallatin
Sponsored by: Ampere Computing LLC
Differential Revision: https://reviews.freebsd.org/D28709
The motivation is to provide access to these registers from userspace
via ptrace(2) requests PT_GETDBREGS and PT_SETDBREGS.
This change breaks the ABI of these particular requests, but is
justified by the fact that the intended consumers (debuggers) have not
been taught to use them yet. Making this change now enables active
upstream work on lldb to begin using this interface, and take advantage
of the hardware debugging registers available on the platform.
PR: 252860
Reported by: Michał Górny (mgorny@gentoo.org)
Reviewed by: andrew, markj (earlier version)
Tested by: Michał Górny (mgorny@gentoo.org)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28415
This is a prerequisite to allowing the use of hardware watchpoints for
userspace debuggers.
This is also a slight departure from the x86 behaviour, since `si_addr`
returns the data address that triggered the watchpoint, not the
address of the instruction that was executed. Otherwise, there is no
straightforward way for the application to determine which watchpoint
was triggered. Make a note of this in the siginfo(3) man page.
Reviewed by: jhb, markj (earlier version)
Tested by: Michał Górny (mgorny@gentoo.org)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28561
In particular, we want to disallow setting breakpoints on kernel
addresses from userspace. The control register fields are validated or
ignored as appropriate.
Reviewed by: markj
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28560
linux_shared_page_init() creates an object and grabs and maps a single
page to back the VDSO. When destroying the VDSO object, we failed to
destroy the mapping and free KVA. Fix this.
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28696
Microoptimize set_syscall_retval() for arm64 by predicting
the return value to be zero. This is similar to what has
been done for other architectures
Reviewed By: emaste, mhorne
Differential Revision: https://reviews.freebsd.org/D26991
On arm64 we can select how strongly we order device memory. Currently
we use the strongest type of non-Gathering, non-Reordering, no Early
write acknowledgement. This is equivalent to VM_MEMATTR_SO in the 32-bit
arm code.
Create a new memory type to remove the no Early write acknowledgement
option to create a memory attribute that is equivalent to the arm
VM_MEMATTR_DEVICE.
Keep the the old nGnRnE memory as what we provide for VM_MEMATTR_DEVICE
until we can test nGnRE on more hardware. A method for dynamically
switching back may be needed as at least one vendor is known to have
broken nGnRE memory.
Sponsored by: Innovate UK
FreeBSD pvscsi and vmx work with VMware ESXi Arm "Fling"; provide these
in GENERIC for a convenient out-of-the-box experience.
PR: 253202
Reported by: Vincent Milum Jr
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
The RW fields in this register reset to architecturally unknown values,
so initialize these to the proper rounding and denormal mode.
MFC after: 1 week
The existing implementation relies on each trap handler saving a normal
stack frame record, which is a waste of time and space when we're
already saving a trapframe to the stack. It's also wrong as it currently
saves LR not ELR.
Instead of patching it up, rewrite it based on the RISC-V implementation
with inspiration from the amd64 implementation for how to handle
vectored traps to provide an improved implementation. This includes
compressing the information down to one line like other architectures
rather than the highly-verbose old form that repeats itself by printing
LR and FP in one frame only to print them as PC and SP in the next. It
also includes printing out actually useful information about the traps
that occurred, though FAR is not saved in the trapframe so we cannot
print it (in general it can be clobbered between when the trap happened
and now), only ESR.
The AAPCS also allows the stack frame record to be located anywhere in
the frame, not just the top, so the caller's SP is not at a fixed offset
from the callee's FP like on almost all other architectures in
existence. This means there is no way to derive the caller's SP in the
unwinder, and so we have to drop that bit of (unused) state everywhere.
Reviewed by: jhb, markj
Differential Revision: https://reviews.freebsd.org/D28026
When userspace tries to access a special register that it doesn't have
access to the kernel receives an exception. On most cores this exception
has been observed to be the undefined instruction exception, however on
the Apple M1 under a QEMU based hypervisor it can be the MSR exception.
Handle this second case by also running the undefined exception handler
on these exceptions.
Sponsored by: Innovate UK
This setting limits the amount of memory that can be allocated to UMA.
On systems with a direct map and ample KVA, however, there is no reason
for VM_KMEM_SIZE_SCALE to be larger than 1. This appears to have been
inherited from the 32-bit ARM platform definitions.
Also remove VM_KMEM_SIZE_MIN, which is not needed when
VM_KMEM_SIZE_SCALE is defined to be 1.[*]
Reviewed by: alc, kp, kib
Reported by: alc [*]
Submitted by: Klara, Inc.
Sponsored by: Ampere Computing
Differential Revision: https://reviews.freebsd.org/D28225
This setting places a (small) limit on the size of the buffer cache,
constraining UFS performance on large servers. The setting comes from
the initial arm64 implementation and appears to be vestigal. Remove it.
Reviewed by: kib
Submitted by: Klara, Inc.
Sponsored by: Ampere Computing
Differential Revision: https://reviews.freebsd.org/D28162
which is the same as GENERIC-MMCCAM but using a nodebug baseline.
Reviewed by: andrew, br (earlier version), jrtc27 (earlier version)
Differential revision: https://reviews.freebsd.org/D28091
cpu_fork_kthread_handler() is always called after either cpu_fork() or
cpu_copy_thread(). The arm64 version was duplicating some of the work
already done by both of those functions.
Sponsored by: Netflix
- Don't oversize the buffer fragment. PAGE_SIZE - (curaddr & PAGE_MASK)
may be greater than the total length of the buffer.
- Don't use roundup2(len, alignment) to calculate the buffer fragment
size. The length of current bounced fragment is not subject to alignment
restriction, and next fragment should start at the page boundary.
Tested by: bz, s199p.wa1k9r@gmail.com
Use a machdep.nirq tunable intead of compile-time constant NIRQ
as a value for maximum number of interrupts. It allows keep a system
footprint small by default with an option to increase the limit
for large systems like server-grade ARM64
Reviewd by: mhorne
Differential Revision: https://reviews.freebsd.org/D27844
Submitted by: Klara, Inc.
Sponsored by: Ampere Computing
This allows us to use it when we only need to check if the virtual address
is valid. For example when checking if an address in the DMAP region is
mapped.
Reviewed by: kib, markj
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D27621
This is the superset of the nooptions found in the -DEBUG kernels.
Reviewed by: emaste, manu
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D28152
In particular, using GELI on a root filesystem will only use
accelerated software crypto drivers if they are available before the
root filesystem is mounted. While these modules can be loaded from
the loader, including them in GENERIC provides a better out-of-the-box
experience for users.
Both aesni(4) and armv8crypto(4) provide accelerated implementations
of the default cipher used by GELI (AES-XTS) in addition to other
ciphers.
Reviewed by: mhorne, allanjude, markj
Differential Revision: https://reviews.freebsd.org/D28100
This removes an unneeded instruction to move the pointer from x18 to a
temporary register.
Reviewed by: emaste
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D26971
Add 64-bit address support to Cadence CGEM Ethernet driver for use in
other SoCs such as the Zynq UltraScale+ and SiFive HighFive Unleashed.
Reviewed by: philip, 0mp (manpages)
Differential Revision: https://reviews.freebsd.org/D24304
Everything required for remote kernel debugging over a serial
connection. For FDT-based systems, a debug port can be specified by
setting hw.fdt.dbgport to the desired device tree node in loader.conf.
For example, hw.fdt.dbgport="uart1", or
hw.fdt.dbgport="serial@ff1a0000".
Looks good: emaste
Tested by: rwatson
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27727
The program counter field in the PCB is written in exactly one place,
makectx(), upon entry to the debugger. For threads other than curthread,
its value will be empty, or bogus. Rather than writing to this field in
more places, it can be removed in favor of using the value in the link
register.
To make this clearer, pcb->pcb_x[30] is renamed to pcb->pcb_lr, similar
to what already exists in struct trapframe. Also, prefer lr to x30 in
assembly, as it better conveys intention.
This improves PC_REGS() for kdb_thread != curthread. It is required for
a functional gdb(4) stub, fixing the output of `info threads`, in
particular.
The space occupied by pcb_pc is retained, for compatibility with kgdb.
Reviewed by: markj, jhb
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27720
This effectively undoes the changes made in r321571. While useful, it is
inconsistent with how other architectures pass trapframes to kdb. This
change is also required to get a working gdb(4) stub on arm64, as
otherwise the backtrace will begin too early.
As of 088a7eef95, this information can still be obtained via
"show registers/u".
Reviewed by: jhb (slightly earlier version)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Pull Request: https://reviews.freebsd.org/D27719
This does an import of quirk stubs, debugging macros from USB code and
numerous usage constants used by dependent drivers.
Besides, this change renames some functions to get a better matching
with userland library and NetBSD/OpenBSD HID code. Namely:
- Old hid_report_size() renamed to hid_report_size_max()
- New hid_report_size() calculates size of given report rather than
maximum size of all reports.
- hid_get_data_unsigned() renamed to hid_get_udata()
- hid_put_data_unsigned() renamed to hid_put_udata()
Compat shim functions are provided in usbhid.h to make possible compile
of legacy code unmodified after this change.
Reviewed by: manu, hselasky
Differential revision: https://reviews.freebsd.org/D27887
It will be used by the upcoming HID-over-i2C implementation. Should be
no-op, except hid.ko module dependency is to be added to affected drivers.
Reviewed by: hselasky, manu
Differential revision: https://reviews.freebsd.org/D27867
No functional change - only moved lines, changed whitespace, and
updated comments.
Reviewed by: allanjude
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28001
There is no reason this driver can't return default probe value.
Submitted by: Artur Rojek <ar@semihalf.com>
Reviewed by: emaste, mmel
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D26869
Replace various hw reg bit set/clear helpers with a universal
`qoriq_gpio_set` function.
Submitted by: Artur Rojek <ar@semihalf.com>
Reviewed by: mmel
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D26868
Make the code more conformant to style(9) and improve the general
readability.
This patch does not alter the driver logic.
Submitted by: Artur Rojek <ar@semihalf.com>
Reviewed by: mmel
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D26867
Later dtb from the RPI Foundation removed the brcm,genet-v5 compatible
for some unknown reason, add brcm,bcm2711-genet-v5 to the list of compatible
device for if_genet
- Add I2S and CODEC clocks to CRU driver
- Add support for gate selection to frac clock
- Add setfreq support to mux clock
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D27831
These macros generate both the 32- and 64-bit ops, but the mask was hard
coded for 32-bit ops, causing the 64-bit ops always to affect only the
low 32 bits.
PR: 252324
Reported by: gbe, mmel
Reviewed by: markj, mmel
Tested by: mmel, rwatson
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D27886
Use the kernel physical base rather than the ttbr0 base when building
the kernel identity map. The latter is correct with current assumptions
but may not always be the case.
Sponsored by: Innovate UK
The adr instruction allows for an address of +-1M from the instruction.
If we replace these with an adrp and an add instruction we can generate
an address +-4G. The adrp will get an address of the 4k page the label
is within, and the add uses the :lo12: prefix to add just the low bits
to this address.
This will allow us to move things around with fewer issues than if we
needed to keep them within the +-1MB range.
Sponsored by: Innovate UK
This sysctl node can generate very verbose output, so don't trigger it
for sysctl -a or sysctl vm.pmap.
Reviewed by: markj, kib
Differential Revision: https://reviews.freebsd.org/D27504
One of the disadvantages of our current busdma code is the fact that
we process the bounced buffer in a page-by-page manner. This means that
the short (subpage) buffer allocated across page boundaries is bounced
to 2 separate pages.
This suboptimal behavior is consistent across all platforms and can be
related to (probably unimplementable or incompatible with bouncing)
BUS_DMA_KEEP_PG_OFFSET flag.
Therefore, allocate one additional page to be fully comply with this
requirement.
Discused with: markj
PR: 251018
Ability to load-balance traffic over multiple path is a must-have thing for routers.
It may be used by the servers to balance outgoing traffic over multiple default gateways.
The previous implementation, RADIX_MPATH stayed in the shadow for too long.
It was not well maintained, which lead us to a vicious circle - people were using
non-contiguous mask or firewalls to achieve similar goals. As a result, some routing
daemons implementation still don't have multipath support enabled for FreeBSD.
Turning on ROUTE_MPATH by default would fix it. It will allow to reduce networking
feature gap to other operating systems. Linux and OpenBSD enabled similar support
at least 5 years ago.
ROUTE_MPATH does not consume memory unless actually used. It enables around ~1k LOC.
It does not bring any behaviour changes for userland.
Additionally, feature is (temporarily) turned off by the net.route.multipath sysctl
defaulting to 0.
Differential Revision: https://reviews.freebsd.org/D27428
Some older PSCI implementations corrupt (or do not pass) the context_id
argument to newly started secondary cores. Although the ideal solution to this
problem is u-boot update, we can find the correct value for the argument (cpuid)
by comparing of real core mpidr register with the value stored in pcu->mpidr.
MFC after: 2 weeks
The definition was copied from amd64, but the layout of the struct
differs slightly between these platforms. This fixes spurious
`unsupported sigaction flag 0xXXXXXXXX` messages when executing some
Linux binaries on arm64.
Reviewed by: emaste
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27460
This same check is used on other architectures. Previously this would
permit a stack frame to unwind into any arbitrary kernel address
(including unmapped addresses).
Reviewed by: andrew, markj
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27362
We assume the boot CPU is always CPU 0 on arm64. To allow for this reserve
cpuid 0 for the boot CPU in the ACPI and FDT cases but otherwise start the
CPU as normal. We then check for the boot CPU in start_cpu and return as if
it was started.
While here extract the FDT CPU init code into a new function to simplify
cpu_mp_start and return FALSE from start_cpu when the CPU fails to start.
Reviewed by: mmel
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D27497
- record MPIDR for all started cores in pcpu, they will be used as link
between physical locality of given core, ID in external description
(FDT or ACPI) and cupid.
- because of above, cpuid can (and should) be freely assigned, only boot
CPU must have cpuid 0. Simplify startup code according this.
Please note that pure cpuid is not sufficient instrument to hold any
information about core or cluster topology, nor to determistically iterate
over subpart of cores in CPU (iterate over all cores in single cluster for
example). Situation is more complicated by fact that PSCI can reject start
of core without reporting error (because power budget for example), or by
fact that is possible that we booted on non-first core in cluster (thus with
cpuid 0 assigned to random core).
Given cores topology should be exhibited to other parts of system
(for example to scheduler for big.little or multicluster systems) by using
smp_topo interface.
Differential Revision: https://reviews.freebsd.org/D13863
Follow-up to r353959 and r368070: do the same for other architectures.
arm32 already seems to use its own .fnstart/.fnend directives, which
appear to be ARM-specific variants of the same thing. Likewise, MIPS
uses .frame directives.
Reviewed by: arichardson
Differential Revision: https://reviews.freebsd.org/D27387
On some of the server-grade ARM64 machines the number of NUMA domains is higher
than 2. When booting GENERIC kernel on such machines the SRAT parser fails
leaving the system with a single domain. To make GENERIC kernel usable on those
server, match the parameter value with the one for amd64 arch.
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D27368
Sponsored by: Ampere Computing
Submitted by: Klara, Inc.
Since EDK2 commit d8e36289cef7bde628b023219cd65fa8e8d4562a, the Graphical console may
completely hide SPCR, causing panics later when locating timers.
As such simply rely on the ACPI Root pointer presence.
Submitted by: dan.kotowski@a9development.com
Reviewed by: andrew, mw
Differential Revision: https://reviews.freebsd.org/D27306
When there is no ACPI redistributor sub-table in the MADT we need to
fall back to use the GICR base address from the GIC CPU interface
structure.
Handle this fallback when adding memory to the device and when counting
the number of redistributors.
PR: 251171
Reported by: Andrey Fesenko <f0andrey_gmail.com>
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D27247
The former tries to dereference memory allocated by the latter. If counting
the redistributor fails it may try to dereference memory that was never
allocated.
Sponsored by: Innovate UK
The same driver works on both, allow the driver to attach to a GICv4
controller with the ACPI attachment.
Reported by: Andrey Fesenko <f0andrey_gmail.com>
Sponsored by: Innovate UK
This adds an arm64 iommu interface and a driver for Arm System Memory
Management Unit version 3.2 (ARM SMMU v3.2) specified in ARM IHI 0070C
document.
Hardware overview is provided in the header of smmu.c file.
The support is disabled by default. To enable add 'options IOMMU' to your
kernel configuration file.
The support was developed on Arm Neoverse N1 System Development Platform
(ARM N1SDP), kindly provided by ARM Ltd.
Currently, PCI-based devices and ACPI platforms are supported only.
The support was tested on IOMMU-enabled Marvell SATA controller,
Realtek Ethernet controller and a TI xHCI USB controller with a low to
medium load only.
Many thanks to Konstantin Belousov for help forming the generic IOMMU
framework that is vital for this project; to Andrew Turner for adding
IOMMU support to MSI interrupt code; to Mark Johnston for help with SMMU
page management; to John Baldwin for explaining various IOMMU bits.
Reviewed by: mmel
Relnotes: yes
Sponsored by: DARPA / AFRL
Sponsored by: Innovate UK (Digital Security by Design programme)
Differential Revision: https://reviews.freebsd.org/D24618
In r367327 generic_bs_sr_<n> were derived from mips. Given we are calling
generic_bs_w_<n> and no write directly, we do not have to do the address
calculations ourselves as eneric_bs_w_<n> will do a str val [bsh, offset].
All we actually have to do is increment offset.
MFC after: 3 days
Memory allocated by bus_dmamem_alloc will take into account any alignment
requirements of the CPU it's running on. Stop trying to bounce in this case
as there is no bounce zone allocated.
Reported by: manu, tuexen
Tested by: manu
Sponsored by: Innovate UK
Implement the bs_sr_<N> generic functions based on the generic
mips implementation calling the generic bs_w_<N> functions in a loop.
ral(4) (rt2860.c) panics in RAL_SET_REGION_4() because bs_sr_4()
is NULL. It seems ral(4) and ti(4) might be the only consumers of
these functions I could find quickly so keeping them in C rather than asm.
Reported by: Steve Wheeler (https://redmine.pfsense.org/issues/11021)
Reviewed by: mmel
MFC after: 3 days
The stage 2 arm64 page tables may need to start at a lower level. This
is because we may only be able to map a limited IPA range and trying
to use a full 4 levels will cause the CPU to fault in an unrecoverable
way.
To simplify the code we still allocate the full 4 levels, however level 0
will only ever be used to find the level 1 table used as the base. Handle
this by creating a dummy entry in the level 0 table to point to the level 1
table.
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D26066
VM_ALLOC_WAITOK and vm_page_unwire_noq(), have eliminated the need for
many of the #includes.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D27052
The multipage alignment requirements is incompatible with many aspects
of actual busdma code. Multi-page alignment requests are incompatible
with many aspects of current busdma code. Mainly with partially bounced
buffer segments and per-page loop in bus_dmamap_load_buffer(). Because
proper implementation would be a major restructuring of the code, add
the fix only for already known uses and do KASSERT for all other cases.
For this reason, bus_dmamap_load_buffer () should take the memory allocated
by bus_dmam_alloc () as one segment bypassing per page segmentation. We can
do this because it is guaranteed that the memory is physically continuous.
Reviewed by: bz
Tested by: imp, mv, daniel.engberg.lists_pyret.net, kjopek_gmail.com
Differential Revision: https://reviews.freebsd.org/D26735
function checks that the mutex lock is owned.
This fixes 'devctl disable re0' operation.
Sponsored by: Innovate DSbD
Differential Revision: https://reviews.freebsd.org/D26904
PCPU_GET(curpmap) expands to multiple instructions on arm64, and if the
current thread is migrated in between execution of those instructions, a
stale value may be used in the assertion condition.
Diagnosed by: mmel
Reported by: mmel, Bob Prohaska <fbsd@www.zefox.net>
Submitted by: alc
MFC after: 1 week
Linux execve() gets audited as AUE_EXECVE as well, we should also interpret
the return from this correctly for the same reasoning as in r367002.
MFC with: r367002
pagezero(). Ultimately, they use the same method for bulk zeroing, but
the generality of bzero() requires size and alignment checks that
pagezero() does not.
Eliminate an unnecessary #include.
Reviewed by: emaste, markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D26876
Use ELR register value instead of LR for PMC_TRAPFRAME_TO_PC macro since
it's the former that indicates PC if the interrupted execution thread.
This fixes a bug where pmcstat lost the leaf function of the call chain
and started with the second function in the chain.
Although this change is an improvement over the previous logic there is still
posibility for incomplete data: if the leaf function does not have stack
variables and does not call any other functions compiler would not generate
a stack frame for it and the FP value would point to the caller's frame, so
instead of the actual "caller1 -> caller2 -> leaf" chain only
"caller1 -> leaf" would be captured.
Sponsored by: Ampere Computing
Submitted by: Klara, Inc.
In the functions that copy between userspace and kernel space we check the
user space address is valid before performing the copy. These are mostly
identical within each type of function so create two macros to perform the
check.
Obtained from: CheriBSD
Sponsored by: Innovate UK
These were missed in the previous pass. The extensions (partially)
supported by this change are:
- ARMv8.2-FHM, Floating-point multiplication variant
- ARMv8.4-LSE, Large System Extensions
- ARMv8.4-DIT, Data Independent Timing instructions
Reviewed by: andrew, markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26707
This brings these definitions in sync with the ARMv8.6 version of the
architecture reference manual.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26706
Hiding this feature behind RB_VERBOSE is gratuitous. The tunable is enough
to limit its use to only those who explicitly request it.
Suggested by: kevans
Ampere Altra in a dual socket configuration has 12 ITSes for the
12 PCIe root complexes. The NIRQ interrupts are statically split
between each child of the gic bus, so here we increase that
value. 16k is enough for
(#cpus * #its * max_pcie_bifurcation) LPIs + (#SPIs and #PPIs)
Reviewed by: jhb
Approved by: scottl (implicit)
MFC after: 1 week
Sponsored by: Ampere Computing
Differential Revision: https://reviews.freebsd.org/D26766
Move dump_avail[] extern declaration and inlines into a new header
vm/vm_dumpset.h. This fixes default gcc build for mips.
Reviewed by: alc, scottph
Tested by: kevans (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D26741
These already use the load variant that simulates userspace access.
Remove the macros that enable normal loads and stores from userspace
as they are unneeded.
Sponsored by: Innovate UK
When trapping on a wrote access to a buffer the kernel has mapped as write
only we should only pass the VM_PROT_WRITE flag. Previously the call to
vm_fault_trap as the VM_PROT_READ flag was unexpected.
Reported by: manu
Sponsored by: Innovate UK
This patch has the driver for 10Gigabit Ethernet controller in AMD
SoC. This driver is written compatible to the Iflib framework. The
existing driver is for the old version of hardware. The submitted
driver here is for the recent versions of the hardware where the Ethernet
controller is PCI-E based.
Submitted by: Rajesh Kumar <rajesh1.kumar@amd.com>
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25793
Push the root seed version to userspace through the VDSO page, if
the RANDOM_FENESTRASX algorithm is enabled. Otherwise, there is no
functional change. The mechanism can be disabled with
debug.fxrng_vdso_enable=0.
arc4random(3) obtains a pointer to the root seed version published by
the kernel in the shared page at allocation time. Like arc4random(9),
it maintains its own per-process copy of the seed version corresponding
to the root seed version at the time it last rekeyed. On read requests,
the process seed version is compared with the version published in the
shared page; if they do not match, arc4random(3) reseeds from the
kernel before providing generated output.
This change does not implement the FenestrasX concept of PCPU userspace
generators seeded from a per-process base generator. That change is
left for future discussion/work.
Reviewed by: kib (previous version)
Approved by: csprng (me -- only touching FXRNG here)
Differential Revision: https://reviews.freebsd.org/D22839
Now that config(8) has supported include for 19 years, transition to
including the NOTES files. include support didn't exist at the time,
nor did the envvar stuff recently added. Now that it does, eliminate
the building of LINT files by just including everything you need.
Note: This may cause conflicts with updating in some cases.
find sys -name LINT\* -rm
is suggested across this commit to remove the generated LINT
files.
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D26540
The boot metadata (also referred to as modinfo, or preload metadata)
provides information about the size and location of the kernel,
pre-loaded modules, and other metadata (e.g. the EFI framebuffer) to be
consumed during by the kernel during early boot. It is encoded as a
series of type-length-value entries and is usually constructed by
loader(8) and passed to the kernel. It is also faked on some
architectures when booted by other means.
Although much of the module information is available via kldstat(8),
there is no easy way to debug the metadata in its entirety. Add some
routines to parse this data and allow it to be printed to the console
during early boot or output via a sysctl.
Since the output can be lengthly, printing to the console is gated
behind the debug.dump_modinfo_at_boot kenv variable as well as the
BOOTVERBOSE flag. The sysctl to print the metadata is named
debug.dump_modinfo.
Reviewed by: tsoome
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D26687
It is unlikely, but possible, that an unrecognized or unsupported
relocation type is encountered while trying to load a kernel module. If
this occurs we should offer the symbol index as a hint to the user.
While here, fix some small style issues.
Reviewed by: markj, kib (amd64 part, in D26701)
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
This appears to be a typo. The AdvSIMD field encodes support for
half-precision floating point SIMD instructions, which corresponds to
HWCAP_ASIMDHP, not HWCAP_ASIMDDP.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Use address of the pointer passed to kernel to determine whether the pointer
is a FDT block (physical address) or a module pointer (virtual kernel address).
This fragment was supposed to be committed before r366196, but I accidentally
skipped it in a patch series.
Reported by: bz
It was removed in r355289 but forgot to return it back when new u-boot booti
support was committed. Although booti is not the preferred method of
booting the kernel, it is very useful for the initial phase of porting
FreeBSD to a new platform or booting the kernel on various embedded boards
in an industrial environment.
Don't map same physical memory multiple times with different cache attributes.
This is explicitly stated as architectural undefined behavior, leading to
coherency issues sooner or later.
- We can exit the loop as soon as the filter check passes.
- The alignment check has already passed so there is no need to also run
it here.
Sponsored by: Innovate UK
We need to use a bounce buffer when the memory we are operating on is not
aligned to a cacheline, and not aligned to the maps alignment.
The former is to stop other threads from dirtying the cacheline while we
are performing DMA operations with it. The latter is to check memory
passed in by a driver is correctly aligned for the device.
Reviewed by: mmel
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D26496
This will ensure nothing modifies the cacheline while DMA is in progress
so we won't need to bounce the data.
Reviewed by: mmel
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D26495
Use it to decide if we can skip cache management.
While here remove the DMAMAP_COULD_BOUNCE flag as it's unneeded.
Reviewed by: mmel
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D26494
Add helper functions to the arm64 busdma for common cases of checking if
we may need to bounce, and if we must bounce for a given address.
These will be expanded later as we handle cache-misaligned memory.
Reported by: mmel
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D26493
On Ampere Altra systems, the sparse population of RAM within the
physical address space causes the vm_page_dump bitmap to be much
larger than necessary, increasing the size from ~8 Mib to > 2 Gib
(and overflowing `int` for the size).
Changing the page dump bitmap also changes the minidump file
format, so changes are also necessary in libkvm.
Reviewed by: jhb
Approved by: scottl (implicit)
MFC after: 1 week
Sponsored by: Ampere Computing, Inc.
Differential Revision: https://reviews.freebsd.org/D26131
These definitions were repeated by all architectures, with small
variations. Consolidate the common definitons in machine
independent code and use bitset(9) macros for manipulation. Many
opportunities for deduplication remain in the machine dependent
minidump logic. The only intended functional change is increasing
the bit index type to vm_pindex_t, allowing the indexing of pages
with address of 8 TiB and greater.
Reviewed by: kib, markj
Approved by: scottl (implicit)
MFC after: 1 week
Sponsored by: Ampere Computing, Inc.
Differential Revision: https://reviews.freebsd.org/D26129
pmap_update_entry() will temporarily clear the valid bit of page table
entries in order to satisfy the arm64 pmap's break-before-make
constraint. pmap_kextract() may operate concurrently on kernel page
table pages, introducing windows where the assertions added in r365879
may fail incorrectly since they implicitly assert that the valid bit is
set. Modify the assertions to handle this.
Reviewed by: andrew, mmel (previous version)
Reviewed by: alc, kib
Reported by: mmel, scottph
MFC with: r365879
Due to a HW bug in the RockChip PCIe implementation, attempting to access
a non-existent register in the configuration space will throw an exception.
Use new bus functions bus_peek() and bus_poke() to overcomme this limitation.
One problem with the bus_space_read_N() and bus_space_write_N() family of
functions is that they provide no protection against exceptions which can
occur when no physical hardware or device responds to the read or write
cycles. In such a situation, the system typically would panic due to a
kernel-mode bus error. The bus_space_peek_N() and bus_space_poke_N() family
of functions provide a mechanism to handle these exceptions gracefully
without the risk of crashing the system.
Typical example is access to PCI(e) configuration space in bus enumeration
function on badly implemented PCI(e) root complexes (RK3399 or Neoverse
N1 N1SDP and/or access to PCI(e) register when device is in deep sleep state.
This commit adds a real implementation for arm64 only. The remaining
architectures have bus_space_peek()/bus_space_poke() emulated by using
bus_space_read()/bus_space_write() (without exception handling).
MFC after: 1 month
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D25371
that can be extended, but also ensure compile-time type checking. Refactor
common code out of arch-specific implementations. Move the mpr and mps
drivers to this new API. The template type remains visible to the consumer
so that it can be allocated on the stack, but should be considered opaque.
As the pl061 driver can be an interrupt controller attach it earlier in the
boot so other drivers can use it.
Use a new GPIO xref to not conflict with the existing root interrupt
controller.
Sponsored by: Innovate UK
Expose some of the new HWCAP features added in r65304. This includes the
addition of elf_hwcap2 into the sysvec, and a separate function to parse
for those features.
This only exposes features which require no further configuration, e.g.
indicating the presence of certain instructions. Larger features (SVE)
will not be advertised until we actually support them. The exact list of
features/extensions this patch exposes is:
- ARMv8.0-DGH
- ARMv8.0-SB
- ARMv8.2-BF16
- ARMv8.2-DCCVADP
- ARMv8.2-I8MM
- ARMv8.4-LRCPC
- ARMv8.5-CondM
- ARMv8.5-FRINT
- ARMv8.5-RNG
- PSTATE.SSBS
While here, annotate elf_hwcap and elf_hwcap2 as __read_frequently, and
move the declarations to the machine/md_var.h header.
Submitted by: mikael@ (D22314 portion)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26031
Differential Revision: https://reviews.freebsd.org/D22314
FreeBSD exports CPU features as bits in the AT_HWCAP and AT_HWCAP2
vectors via elf_aux_info(3). This interface is similar to getauxval(3)
on Linux, and for simplicity to consumers we try to maintain an
identical set of feature flags on arm64.
The first batch of AT_HWCAP flags were added in r350166, corresponding
to definitions that already existed in Linux. Unfortunately, one flag
was missed, and a portion of the values are shifted one bit to the right
as a result.
Add the missing definition for HWCAP_ASIMDHP, and adjust the affected
values to match their Linux counterparts.
Although this is an ABI-breaking change, there is no plan to provide
compat code for old binaries. An audit of our ports tree and other
software via Debian code search indicates that there are not yet any
consumers of this interface for FreeBSD/arm64.
Bump __FreeBSD_version to be on the safe side, in case compat code needs
to be added in the future.
Reviewed by: emaste, manu
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26329
A PL061 is a simple 8 pin GPIO controller. This GPIO device is used to
signal an internal request for shutdown on some virtual machines including
Arm-based Amazon EC2 instances.
Submitted by: Ali Saidi <alisaidi_amazon.com> (previouss version)
Reviewed by: Ali Saidi, manu
Differential Revision: https://reviews.freebsd.org/D24065
Allwinner USB DRD is based on the Mentor USB OTG controller, with a
different register layout and a few missing registers.
The code is by Andrew Turner (andrew).
Reviewed by: hselasky, manu
Obtained from: andrew
MFC after: 5 weeks
Differential Revision: https://reviews.freebsd.org/D5881
This is in sync with what is defined for Linux 5.8. Note that all bits
in HWCAP are exhausted, and HWCAP2 has been added.
This also revealed an error in some of the existing definitions. We are
missing HWCAP_ASIMDHP, and as a result a portion of the HWCAP values are
shifted right by one bit. This will be fixed in an upcoming change, but
the values being added now are compatible with what Linux defines.
Reviewed by: emaste, markj, manu
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26030
We don't need these pagetables after the early boot. Remove the chance we
write to memory we didn't expect to and remove architectural undefined
behaviour.
Reviewed by: alc (earlier version), mmel
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D22606
Currently we use a single bit to indicate whether the virtual page is
part of a superpage. To support a forthcoming implementation of
non-transparent 1GB superpages, it is useful to provide more detailed
information about large page sizes.
The change converts MINCORE_SUPER into a mask for MINCORE_PSIND(psind)
values, indicating a mapping of size psind, where psind is an index into
the pagesizes array returned by getpagesizes(3), which in turn comes
from the hw.pagesizes sysctl. MINCORE_PSIND(1) is equal to the old
value of MINCORE_SUPER.
For now, two bits are used to record the page size, permitting values
of MAXPAGESIZES up to 4.
Reviewed by: alc, kib
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D26238
This allows privileged userspace processes to find information about the
physical page backing a given mapping. It is useful in applications
such as DPDK which perform some of their own memory management.
Reviewed by: kib, jhb (previous version)
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D26237
This whitespace was intentionally added to help differentiate the different
register groups within this file.
While here add missing whitespace from earlier in the file,
Sponsored by: Innovate UK
When enabling the MMU on arm64 we need to ensure the tlb invalidation has
completed before setting the enable bit in the SCTLR register.
Reported by: alc
Sponsored by: Innovate UK
Add support for stage 2 pmap to pmap_pte_dirty, pmap_release, and more
of pmap_enter. This adds support in all placess I have hit while testing
bhyve ehile faulting pages in as needed.
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D26065
The Ampere Altra has physical memory populated sparsely within the
physical address space. Increase the size of the dmap to cover all
physical memory.
Reviewed by: andrew
Approved by: scottl (implicit)
MFC after: 1 week
Sponsored by: Ampere Computing, Inc.
Differential Revision: https://reviews.freebsd.org/D26134
Add a synchronizing instruction to flush and wait until the local
CPU's writes are observable to other CPUs before sending IPIs.
This fixes an issue where recipient CPUs doing a rendezvous could
enter the rendezvous handling code before the initiator's writes
to the smp_rv_* variables were visible. This manifested as a
system hang, where a single CPU's increment of smp_rv_waiters[0]
actually happened "before" the initiator's zeroing of that field,
so all CPUs were stuck with the field appearing to be at
ncpus - 1.
Reviewed by: andrew, markj
Approved by: scottl (implicit)
MFC after: 1 week
Sponsored by: Ampere Computing, Inc.
Differential Revision: https://reviews.freebsd.org/D25798
Currently, we parse notes for the values of ELF FreeBSD feature flags
and osrel. Knowing these values, or knowing that image does not carry
the note if pointers are NULL, is useful to decide which ABI variant
(brand) we want to activate for the image.
Right now this is only a plumbing change
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D25273
According to the ARM Design Document "IO Remapping Table Platform"
(DEN 0049D), the "Number of IDs" field of the ID mapping format means
"The number of IDs in the range minus one".
Submitted by: Greg V <greg@unrelenting.technology>
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D25179
Those messages were printed hundreds of times during boot, often multiple
times for each table. We already print information about the tables in
more organized form once to not duplicate it when random ACPI drivers are
attaching.
MFC after: 1 week
This is a step towards facilitating jails with only Linux binaries.
Supporting emul_path adds path lookups which are completely spurious
if the binary at hand runs in a Linux-based root directory.
It defaults to on (== current behavior).
make -C /root/linux-5.3-rc8 -s -j 1 bzImage:
use_emul_path=1: 101.65s user 68.68s system 100% cpu 2:49.62 total
use_emul_path=0: 101.41s user 64.32s system 100% cpu 2:45.02 total
The hard work of parsing fields per-CPU, handling heterogeneous
features, and excluding features from userspace is already done by
update_special_regs. We can build our set of HWCAPs from the result.
This exposed a small bug in update_special_regs, in which the
generated bitmask was not wide enough, and as a result some bits
weren't being exposed in user_cpu_desc. Fix this.
While here, adjust some formatting.
Reviewed by: andrew
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26069
This adds definitions for the latest additions to the AA64ISAR[01] ID
registers. This brings these registers in sync with ARMv8.6 initial spec
release.
An future change will parse many of these fields for HWCAP features.
Reviewed by: andrew, manu, markj (all previous versions)
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26029
This adds support for the Cortex-A76 and Neoverse-N1 PMU counters to pmc.
While here add more PMCR_IDCODE values and check the implementers code is
correct before setting the PMU type.
Reviewed by: bz, emaste (looks reasonable to me)
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25959
- Do not rely on U-Boot for clocks configuration, enable and set frequencies
in the driver's attach method.
- Adjust MAC settings according to detected linespeed on RK3399 and RK3328.
- Add support for RMII PHY mode on RK3328.
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D26006
Ethernet clocks on RK3328 are controlled by SYSCON registers, so add
RK_CLK_COMPOSITE_GRF flag to indicate that clock node should access grf
registers instead of CRU's
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D25918
APEI allows platform to report different kinds of errors to OS in several
ways. We've found that Supermicro X10/X11 motherboards report PCIe errors
appearing on hot-unplug via this interface using NMI. Without respective
driver it ended up in kernel panic without any additional information.
This driver introduces support for the APEI Generic Hardware Error Source
reporting via NMI, SCI or polling. It decodes the reported errors and
either pass them to pci(4) for processing or just logs otherwise. Errors
marked as fatal still end up in kernel panic, but some more informative.
When somebody get to native PCIe AER support implementation both of the
reporting mechanisms should get common error recovery code. Since in our
case errors happen when the device is already gone, there is nothing to
recover, so the code just clears the error statuses, practically ignoring
the otherwise destructive NMIs in nicer way.
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
Being able to use tmpfs without kernel modules is very useful when building
small MFS_ROOT kernels without a real file system.
Including TMPFS also matches arm/GENERIC and the MIPS std.MALTA configs.
Compiling TMPFS only adds 4 .c files so this should not make much of a
difference to NO_MODULES build times (as we do for our minimal RISC-V
images).
Reviewed By: br (earlier version for riscv), brooks, emaste
Differential Revision: https://reviews.freebsd.org/D25317
