Commit Graph

36809 Commits

Author SHA1 Message Date
Peter Wemm
4e8691dc95 Clean up the kernel/kernel.debug/install.debug etc stuff.
Sense ${DEBUG} to decide on building kernel.debug or not.
Use a common install and install.debug target to minimize duplication.
(I deleted the ELF transition kernel warning, it was getting dated..)
1999-04-13 18:25:08 +00:00
Peter Wemm
b282e6c130 Clean up the -g/DEBUG handling. This logic can go in the Makefile
so that config -g can work the same as:  makeoptions DEBUG="-g"
1999-04-13 18:22:57 +00:00
Mark Murray
a4e77b9b5f As the INFO stuff un doc/ works, we may as well build/install it.
OK'ed by:	obrien
1999-04-13 17:56:28 +00:00
Bill Paul
ca31683853 Some more fixes:
- It turns out that the 'promiscuous mode' bug what I discovered with the
  PNIC is not restricted to promiscuous mode. I've been doing some remote
  debugging for someone with a P75 system, and at 100Mbps, the receiver
  screws up even when the NIC is in normal mode. Thus, enable the workaround
  for this bug all the time. Note that the workaround is still not enabled
  for the PNIC II, since I haven't tested one yet.

- Set the 'arbitration' bit in the bus configuration register and set the
  maximum burst size to 16 longwords. This seems to fix problems with
  transmit corruption on the P75 system mentioned above. (It probably hurts
  performance a bit too, but I've given up trying to make the PNIC perform
  well.)
1999-04-13 17:29:55 +00:00
Hidetoshi Shimokawa
9d3c09b69f Use u_int32_t for sin_addr.s_addr rather than u_long to avoid
unaligned access on alpha.
1999-04-13 16:26:21 +00:00
Hidetoshi Shimokawa
76fcfc1aba Initialize alpha_unaligned_* as I intended.
I misunderstood SYSCTL_INT in previous revision.
1999-04-13 15:42:34 +00:00
Semen Ustimenko
2286ba29c0 Removed DIAGNOSTIC opion redefinition.
Submitted by:	Eivind Eklund <eivind@FreeBSD.org>
1999-04-13 14:54:20 +00:00
Guy Helmer
4bef9e2275 Reference kldfind(2), kldfirstmod(2), kldload(2), kldnext(2), kldstat(2),
and kldunload(2).

Submitted by:	Chris Costello <chris@holly.dyndns.org>
1999-04-13 14:51:51 +00:00
Guy Helmer
22872b5fc2 Add kld(4) man page. Copyright notice in PR submission was "???", which
I changed to "Christopher G. Demetriou" since the page appears to be a
revision of lkm(4).

PR:		docs/8611
Submitted by:	Rajesh Vaidheeswarran <rv@fore.com>
1999-04-13 13:23:11 +00:00
Martin Cracauer
466b673d7e Remove my temporary detection for PR 7059, Tor Egge fixed this bug.
PR:		7059
1999-04-13 12:43:55 +00:00
Hellmuth Michaelis
4b3cd41c63 Make sending the postcard optional (as suggested by phk). 1999-04-13 12:24:33 +00:00
Bruce Evans
5570727607 Fixed bogus SRCS definition which broke make depend'. Plain make'
worked accidentally because the rule to generate ${OBJS} from ${SRCS}
is sloppy.

Fixed style bugs.
1999-04-13 09:11:20 +00:00
Warner Losh
d5ca06364c Note that cc -aout has been broken for a while and a reminder to
recompile now that it has been fixed.

Submitted by: Peter Wemm
1999-04-13 06:10:53 +00:00
Jordan K. Hubbard
7f782a1b9e Fix a misspelling. 1999-04-13 05:14:44 +00:00
Tor Egge
c4e5a8a8b9 During variable expansion, the internal representation of the expression
might be relocated.  Handle this case.
PR:		7059
1999-04-13 04:13:09 +00:00
Tor Egge
87c737bc83 Backout early start of APs since it caused some machines to hang. 1999-04-13 03:24:47 +00:00
Guy Helmer
b6adffbf1b Correctly ref editline(3).
PR:		docs/10973
1999-04-13 02:42:53 +00:00
Guy Helmer
79deb70e15 Typo fix.
PR:		docs/11022
1999-04-13 02:32:12 +00:00
Guy Helmer
8570fd2a09 Change LKM/modload to KLD/kldload.
Submitted by:	Nathan Ahlstrom <nrahlstr@winternet.com>
1999-04-13 02:20:07 +00:00
Greg Lehey
cb79c9a4d7 Update description of how to analyse kernel dumps. 1999-04-13 01:18:51 +00:00
Bill Paul
ea716519f5 Merge in some updates for the RealTek driver, mainly:
- Rewrite the transmit section to be a little less bogus.
- Set ifq_maxlen correctly. RL_TX_LIST_CNT - 1 is wrong, because for the
  RealTek, RL_TX_LIST_CNT is 4. Set it to IFQ_MAXLEN instead.
1999-04-12 21:37:00 +00:00
Bill Paul
d90ce12302 Grr... don't touch the PN_GEN (general purpose) register in pn_setcfg()
unless this is a NIC without an MII-based PHY (i.e. an older LinkSys
LNE100TX).
1999-04-12 21:13:12 +00:00
Bill Paul
980e28f69a Add support for the 3cSOHO100-TX, which is a "hurricane" chipset
(cut-down version of the "cyclone" for the small office/home office
"cheap bastard" market). Basically the same as a 3c905B but without
Wake-on-LAN, ROM socket, etc...
1999-04-12 20:38:45 +00:00
Dag-Erling Smørgrav
df24339750 Mention the new splash_pcx decoder. 1999-04-12 18:56:51 +00:00
Masafumi Max NAKANE
420d47446f Typo fix, src/sys/gnu/usr.bin/cc -> src/gnu/usr.bin/cc. 1999-04-12 16:22:15 +00:00
Brian Somers
b9a5e41806 Remove extraneous space
PR:		11096
1999-04-12 15:26:41 +00:00
Martin Cracauer
4c1b08b3bb Fix typo in source-explaining comment. 1999-04-12 15:23:27 +00:00
Eivind Eklund
e9e9477aac More consistent with surrounding style. (Hey - it looked great in the
diff...)

Prodded by:	bde
1999-04-12 14:34:52 +00:00
Eivind Eklund
437250056e Shorten line.
Prodded by:	bde
1999-04-12 14:31:28 +00:00
Martin Cracauer
9d5efc1507 Add a guarded abort() for the problem in PR bin/7059 (no fix so far,
this is hairy).

Reformat this file to comply to style(9). It had mixed styles before.

PR:		bin/7059
1999-04-12 14:23:36 +00:00
Dag-Erling Smørgrav
7a19b7ed76 PCX loader for pseudo-device splash. 1999-04-12 13:39:11 +00:00
Dag-Erling Smørgrav
601752d5a7 Centralize and reorganize a few macros. 1999-04-12 13:34:58 +00:00
Dag-Erling Smørgrav
eca2ddda6f Typo in comment. 1999-04-12 10:07:15 +00:00
Brian Somers
7b598cd2e7 ppp != iijppp any more
Mention nos-tun as a tun device user.
1999-04-12 09:45:29 +00:00
KATO Takenori
aafbdf0b08 Sync with sys/i386/isa/isa.c revision 1.118. 1999-04-12 03:31:05 +00:00
Bill Paul
90ccde293e Minor tweak: move initialiation of busctl register to before setting of
the cache alignment bits.
1999-04-12 02:47:20 +00:00
Dag-Erling Smørgrav
db0343cabf Don't build man page indices if NOMAN is defined.
PR:		bin/11035
Submitted by:	Chris Costello <chris@holly.dyndns.org>
1999-04-11 21:48:09 +00:00
Dmitrij Tejblum
88874fcfe6 Document pread() and pwrite().
Obtained from:	NetBSD (mostly)
1999-04-11 21:14:40 +00:00
Nick Hibma
6f749ef4fc Syncing with NetBSD version 1998/12/14 1999-04-11 21:03:28 +00:00
Nick Hibma
7dc1a5bd17 Make debugging more selective.
Remove debugging options from GENERIC
1999-04-11 20:53:50 +00:00
Nick Hibma
67aa00a71b 1) Make debugging more selective.
2) create function usbd_errstr which turns a usbd_status into a sensible
   error message
3) Change the printf in DPRINTF to logprintf which is a define for
   log(KERN_DEBUG, x)
1999-04-11 20:50:33 +00:00
Andrey A. Chernov
c8bdad599f Remove old locale links conversion stuff 1999-04-11 19:46:36 +00:00
Bill Paul
863e79b09e Some small updates:
- Wait longer for the reset to complete in xl_attach() to try and avoid
  'command never completed' warnings.

- Clean up a few odds and ends in xl_attach().

- Add PCI ID for the 3c905B-COMBO (a new card). Right now this is
  treated as a 3c905B; I need to dig up one of these cards for testing
  before I can make the AUI and BNC ports work.

- Add a hack to force reading the I/O address directly from the PCI
  registers if pci_map_port() fails. I SHOULD NOT HAVE TO DO THIS:
  SOMEBODY WITH MORE PCI CLUES THAN I SHOULD INVESTIGATE WHY THIS
  HAPPENS.
1999-04-11 17:44:44 +00:00
Nick Hibma
91fe4c07fa Applied patch for ukbd disconnect. Disconnect not fully functional
yet however.

Supplied by: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
1999-04-11 16:49:15 +00:00
Nick Hibma
49de1dd30d USBD_STALLED bit checking was inconsistent. Mixed use of == and &
Patch provided by: Kazutaka YOKOTA
1999-04-11 16:43:48 +00:00
Nick Hibma
2115c3404f Remove unit from struct. Not used anymore. 1999-04-11 16:22:57 +00:00
Peter Wemm
b4718cedf6 Move initialization of SWI's in the tty|net|bio masks from isa.c into
the static initializers in ipl.s.
1999-04-11 15:51:15 +00:00
Nick Hibma
885f82db0c Fix typo's in previous commit. 1999-04-11 14:28:54 +00:00
Nick Hibma
db6d3fde6d Added information on how to use a USB mouse under XFree.
Supplied by: Kazutaka YOKOTA
1999-04-11 14:27:52 +00:00
Nick Hibma
f6f5fdd730 Reenable the recursive disconnection from a hub. Stop gap solution
until the newbus version of uhub.c is ready.

Submitted by: Kazutaka YOKOTA
1999-04-11 14:24:43 +00:00