register values" of the architecture manual, an isb instruction should be
executed after updating ttbr0_el1 and before invalidating the TLB. The
lack of this instruction in pmap_activate() appears to be the reason why
andrew@ and I have observed an unexpected TLB entry for an invalid PTE on
entry to pmap_enter_quick_locked(). Thus, we should now be able to revert
the workaround committed in r349442.
Reviewed by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20904
via an ioctl interface. Rules can be added or removed and stats and
counters can be zeroed out. As the ipfilter interprets these
instructions or operations they are stored in an integer called
addrem (add/remove). 1 is add, 2 is remove, and 3 is clear stats and
counters. Much of this is not documented. This commit documents these
operations by replacing simple integers with a self documenting
enum along with a few basic comments.
MFC after: 1 week
This device cannot cross a 4GB boundary with DMA. Removing the
boundary in r346386 resulted in low frequency memory corruption on
machines with isci(4) controllers.
Submitted by: gallatin@
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20910
well as sets in some of the groundwork for committing BBR. The
hpts system is updated as well as some other needed utilities
for the entrance of BBR. This is actually part 1 of 3 more
needed commits which will finally complete with BBRv1 being
added as a new tcp stack.
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D20834
Thus, when using proccontrol(1) to disable implicit application of
PROT_MAX within a process, child processes will inherit this setting.
Discussed with: kib
MFC with: r349609
Sponsored by: The FreeBSD Foundation
Instead of including stdint.h for uintptr_t, include sys/_types.h and use
__types for everything that isn't a native C keyword type.
Remove the #include of cdefs.h. It appears after the include of armreg.h
which has a precondition of cdefs.h being included before it, so everyone
including sysarch.h is already including cdefs.h. (When armv5 support
goes away, there will be no need include armreg.h here either.)
Unfortunately, the unprefixed struct member names "addr" and "len" cannot
be changed, because 3rd-party software is relying on them (libcompiler_rt
is one known consumer).
On POWER9/pseries, QEMU passes several regions of memory,
instead of a single region containing all memory, as the
code was expecting.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D20857
After r349240 kern_mprotect returns EINVAL for unsupported bits in the prot
argument. Linux rtld uses PROT_GROWSDOWN and PROT_GROWS_UP when marking the
stack executable. Mask these bits like kern_mprotect used to do. For other
unsupported bits EINVAL is returned like Linux does.
Reviewed by: trasz, brooks
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20864
3.4.1, which is still in the stable/10 branch.
It looks like clang 3.4.1 implements static_asserts by instantiating a
temporary static object, and if those are in an anonymous union, it
results in "error: anonymous union can only contain non-static data
members".
To work around this implementation limitation, move the static_asserts
in question out of the anonymous unions.
This should make building the latest stable/11 from stable/10 possible
again.
Reported by: Mike Tancsa <mike@sentex.net>
MFC after: 3 days
sv_maxuser specifies the maximum addressable space for user space. Presently
this is all 64-bits worth, which is impossible for a 32-bit process.
This bug has existed since the initial import of powerpc64 in 2010.
MFC after: 2 weeks
This is more consistent with the rest of the function and lets us
unindent most of the function.
Reviewed by: kib
MFC after: 1 month
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D20897
of pmap_load_clear(), in places where we don't care about the page table
entry's prior contents.
Eliminate an unnecessary pmap_load() from pmap_remove_all(). Instead, use
the value returned by the pmap_load_clear() on the very next line. (In the
future, when we support "hardware dirty bit management", using the value
from the pmap_load() rather than the pmap_load_clear() would have actually
been an error because the dirty bit could potentially change between the
pmap_load() and the pmap_load_clear().)
A KASSERT() in pmap_enter(), which originated in the amd64 pmap, was meant
to check the value returned by the pmap_load_clear() on the previous line.
However, we were ignoring the value returned by the pmap_load_clear(), and
so the KASSERT() was not serving its intended purpose. Use the value
returned by the pmap_load_clear() in the KASSERT().
MFC after: 2 weeks
Add VMBus protocol version 4.0. and 5.0 to support Windows 10 and newer HyperV hosts.
For VMBus 4.0 and newer HyperV, the netvsc gpadl teardown must be done after vmbus close.
Submitted by: whu
MFC after: 2 weeks
Sponsored by: Microsoft
r348164 added code to iicbus_request_bus/iicbus_release_bus to automatically
call device_busy()/device_unbusy() as part of aquiring exclusive use of the
bus (so modules can't be unloaded while the bus is exclusively owned and/or
IO is in progress). That broke the ability to do i2c IO from a slave device
probe method, because the slave isn't attached yet, so calling device_busy()
triggers a sanity-check panic for trying to busy a non-attached device.
Now we check whether the device status is < DS_ATTACHING, and if so we busy
the iicbus rather than the slave device. I think this leaves a small window
where a module could be unloaded while probing is in progress. But I think
that's true of all devices, and probably should be fixed by introducing a
DS_PROBING state for devices, and handling that at various points in the
newbus code.
Eliminate the TIMEDOUT state. This state really conveyed two different
concepts: I timed out during recovery (and my command got put on the
recovery queue), and I timed out diring discovery (which doesn't).
Separate those two concepts into two flags. Use the TIMEDOUT flag to
fail requests as timed out. Use the on queue flag to remove them from
the queue.
In mps_intr_locked for MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY message
type, when completing commands, ignore the ones that are not in state
INQUEUE. They were already completed as part of the recovery
process. When we complete them twice, we wind up with entries on the
free queue that are marked as busy, trigging asserts.
Reviewed by: scottl (earlier version, just for mpr)
Differential Revision: https://reviews.freebsd.org/D20785
The hold_count and wire_count fields of struct vm_page are separate
reference counters with similar semantics. The remaining essential
differences are that holds are not counted as a reference with respect
to LRU, and holds have an implicit free-on-last unhold semantic whereas
vm_page_unwire() callers must explicitly determine whether to free the
page once the last reference to the page is released.
This change removes the KPIs which directly manipulate hold_count.
Functions such as vm_fault_quick_hold_pages() now return wired pages
instead. Since r328977 the overhead of maintaining LRU for wired pages
is lower, and in many cases vm_fault_quick_hold_pages() callers would
swap holds for wirings on the returned pages anyway, so with this change
we remove a number of page lock acquisitions.
No functional change is intended. __FreeBSD_version is bumped.
Reviewed by: alc, kib
Discussed with: jeff
Discussed with: jhb, np (cxgbe)
Tested by: pho (previous version)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D19247
table VCTRL registers.
Unconditionally program the MSI-X vector control Mask field for MSI-X
table entries without regarud for Mask's previous value. Some devices
return all zeros on reads of the VCTRL registers, which would cause us
to skip disabling interrupts. This fixes the Samsung SM961/PM961 SSDs
which are return zero starting from offset 0x3084 within the memory
region specified by BAR0, even when they are active MSI-X vectors.
The Illumos kernel writes these unconditionally to 0 or 1. However,
section 6.8.2.9 of the PCI Local Bus 3.0 spec (dated Feb 3, 2004)
states for bits 31::01:
After reset, the state of these bits must be 0. However, for
potential future use, software must preserve the value of
these reserved bits when modifying the value of other Vector
Control bits. If software modifies the value of these reserved
bits, the result is undefined."
so we always set or clear the Mask bit, but otherwise preserves the
old value.
PR: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=211713
Reviewed By: imp, jhb
Submitted by: Ka Ho Ng
MFC After: 1 week
Differential Revision: https://reviews.freebsd.org/D20873
While at it fix an invalid memory access issue when attaching external
USB HUBs, which are not mapped by ACPI, due to missing status check
when calling AcpiGetObjectInfo() from acpi_usb_hub_port_probe_cb().
Sponsored by: Mellanox Technologies
Pages with PG_PCPU_CACHE set cannot have been allocated from a
reservation, so as an optimization, skip the call to
vm_reserv_free_page() in this case. Otherwise, the access of
the corresponding reservation structure often results in a cache
miss.
Reviewed by: alc, kib
Discussed with: jeff
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20859
Some workloads benefit from having a per-CPU cache for
VM_FREEPOOL_DIRECT pages.
Reviewed by: dougm, kib
Discussed with: alc, jeff
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20858
When the system has no graphical console, such as bhyve in common
configurations, ignore kern.vt.splash_cpu, instead of panicking
on INVARIANTS kernels.
Reviewed by: cem dumbbell
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20877
Although PPC SLB code doesn't handle allocation failures,
which are rare, in most places it asserts that the pointer
returned by uma_zalloc() is not NULL, making it easier to
identify the failure and avoiding an invalid pointer dereference.
This change simply adds a missing KASSERT in SLB code.
In 2011, r218961 removed local code for rotating logs in favor of using the
rotate_log command in etc/rc.d/accounting. If the accounting service is
activated then subsequently de-activated in rc.conf but still remains active
in periodic.conf, then you get an error message every day in the periodic
jobs about being unable to rotate the logs.
With this change to use "onerotate_log", the log rotation will happen the
first time periodic daily runs after accounting was disabled but periodic
accounting was left enabled. After that happens once, the /var/account/acct
will no longer exist, which results in a different path through the periodic
code and no more error messages will appear (unless daily_show_badconfig is
set, in which case the admin will be told that periodic security processing
is enabled but the accounting file is not present).
This is only a partial fix for the problems reported in PR 202203.
PR: 202203
Bhyve can currently emulate two virtual NICs, namely virtio-net and e1000,
and connect to the host network through two backends, namely tap and netmap.
However, there is no interface between virtual NIC functionalities and
backend functionalities. As a result, the backend code is duplicated between
the two virtual NIC implementations and also within the same virtual NIC.
Also, e1000 cannot currently use netmap as a backend.
This patch introduces a network backend API between virtio-net/e1000 and
tap/netmap, to improve code reuse and add missing functionalities.
Virtual NICs and backends can negotiate virtio-net features, such as checksum
offload and TSO. If the backend supports the features, it will propagate this
information to the guest, so that the latter can make use of them. Currently,
only netmap VALE ports support the features, but support should be added to
tap in the future.
Reviewed by: jhb, bryanv
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20659
