star for me. EVENTHANDLER_DEREGISTER() attempts to acquire the lock which is
held by the event handler framework while executing event handler functions,
leading to deadlock.
Move EVENTHANDLER_DEREGISTER() to alq_load_handler() and thus deregister the ALQ
shutdown_pre_sync handler at module unload time, which takes care of the
originally reported panic and fixes the deadlock introduced in r250951.
Reported by: Luiz Otavio O Souza
MFC after: 3 days
X-MFC with: 250951
needed for the last 10 years. Far too much of the internal API is
exposed, and every small adjustment causes applications to stop working.
To kick this off, bump the API version to 0x17 as should have been done
with r246713, but add shims to compensate. Thanks to the shims, there
should be no visible change in application behavior.
I have plans to do a significant overhaul of the API to harnen it for
the future, but until then, I welcome others to add shims for older
versions of the API.
Obtained from: Netflix
backing memory that is only a container for per-cpu caches of arbitrary
pointer items. These zones have no kegs.
- Convert the regular keg based allocator to use the new import/release
functions.
- Move some stats to be atomics since they would require excessive zone
locking/unlocking with the new import/release paradigm. Make
zone_free_item simpler now that callers can manage more stats.
- Check for these cache-only zones in the public APIs and debugging
code by checking zone_first_keg() against NULL.
Sponsored by: EMC / Isilong Storage Division
In the ext2fs driver we have a mixture of headers:
- The ext2_ prefixed headers have strong influence from NetBSD
and are carry specific ext2/3/4 information.
- The unprefixed headers are inspired on UFS and carry implementation
specific information.
Do some small adjustments so that the information is easier to
find coming from either UFS or the NetBSD implementation.
MFC after: 3 days
That way _Atomic() is defined next to all the other C11 keywords for
which we provide compatibility for pre-C11 compilers. While there, fix
the definition to place "volatile" at the end. Otherwise pointer types
will become "volatile T *" instead of "T * volatile".
In order to get some coverage of C11 atomics in kernelspace, switch at
least one piece of code in kernelspace to use C11 atomics instead of
<machine/atomic.h>.
While there, slightly improve the code by adding an assertion to prevent
the use count from going negative.
ensure all per-vnet related hhook initialisation is completed prior to any
virtualised hhook points attempting registration.
vnet_register_sysinit() requires that a stage later than SI_SUB_VNET be chosen.
There are no per-vnet initialisors in the source tree at this time which run
earlier than SI_SUB_INIT_IF. A quick audit of non-virtualised SYSINITs indicates
there are no subsystems pre SI_SUB_MBUF that would likely be interested in
registering a virtualised hhook point.
Settle on SI_SUB_MBUF as hhook's per-vnet initialisation stage as it's the first
overtly network-related initilisation stage to run after SI_SUB_VNET. If a
subsystem that initialises earlier than SI_SUB_MBUF ends up wanting to register
virtualised hhook points in future, hhook's use of SI_SUB_MBUF will need to be
revisited and would probably warrant creating a dedicated SI_SUB_HHOOK which
runs immediately after SI_SUB_VNET.
MFC after: 1 week
The atomic_load() and atomic_store() macros conflict with the equally
named macros from <stdatomic.h>. Remove them, as they are only used to
implement functions that are not present on any of the other
architectures.
Provide both __sync_*-style and __atomic_*-style functions that perform
the atomic operations on ARMv5 by using Restartable Atomic Sequences.
While there, clean up some pieces of code where it's sufficient to use
regular uint32_t to store register contents and don't need full reg_t's.
Also sync this back to the MIPS code.
hook functions into hhook points which register after the modules were loaded -
potentially useful during boot or if hhook points are dynamically registered.
MFC after: 1 week
only re-enable I/O when all reasons have cleared.
sys/dev/xen/blkfront/block.h:
In the block front driver softc, replace the boolean
XBDF_FROZEN flag with a count of commands and driver global
issues that freeze the I/O queue. So long xbd_qfrozen_cnt
is non-zero, I/O is halted.
Add flags to xbd_flags for tracking grant table entry and
free command resource shortages. Each of these classes can
increment xbd_qfrozen_cnt at most once.
Add a command flag (XBDCF_ASYNC_MAPPING) that is set whenever
the initial mapping attempt of a command fails with EINPROGRESS.
sys/dev/xen/blkfront/blkfront.c:
In xbd_queue_cb(), use new XBDCF_ASYNC_MAPPING flag to definitively
know if an async bus dmamap load has occurred.
Add xbd_freeze() and xbd_thaw() helper methods for managing
xbd_qfrozen_cnt and use them to implement all queue freezing logic.
Add missing "thaw" to restart I/O processing once grant references
become available.
Sponsored by: Spectra Logic Corporation
hhook_{add|remove}_hook_lookup() so that khelp (and other potential API
consumers) do not have to care when they attempt to (un)hook a particular hook
point identified by id and type.
Reviewed by: scottl
MFC after: 1 week
QEMU 1.4 made the descriptor requirement stricter - the size of buffer
descriptor must exactly match the number of MAC addresses provided.
PR: kern/178955
MFC after: 5 days
Move FreeBSD from interface version 0x00030204 to 0x00030208.
Updates are required to our grant table implementation before we
can bump this further.
sys/xen/hvm.h:
Replace the implementation of hvm_get_parameter(), formerly located
in sys/xen/interface/hvm/params.h. Linux has a similar file which
primarily stores this function.
sys/xen/xenstore/xenstore.c:
Include new xen/hvm.h header file to get hvm_get_parameter().
sys/amd64/include/xen/xen-os.h:
sys/i386/include/xen/xen-os.h:
Correctly protect function definition and variables from being
included into assembly files in xen-os.h
Xen memory barriers are now prefixed with "xen_" to avoid conflicts
with OS native primatives. Define Xen memory barriers in terms of
the native FreeBSD primatives.
Sponsored by: Spectra Logic Corporation
Reviewed by: Roger Pau Monné
Tested by: Roger Pau Monné
Obtained from: Roger Pau Monné (bug fixes)
KASSERT during TCP hhook registration at boot. Virtualised hook points only
require extra housekeeping and sanity checking when "options VIMAGE" is present.
Reported by: bdrewery,jh,dhw
Tested by: dhw
MFC after: 1 week
X-MFC with: 251732
scheme for defining inline command queuing functions.
Prefer enums to #defines.
sys/dev/xen/blkfront/block.h
Replace inline function generation performed by the
XBDQ_COMMAND_QUEUE() macro with single instances of each
inline function (init, enqueue, dequeue, remove). This was
made possible by using queue indexes instead of bit flags
in the command structure, and passing the index enum as
an argument to the functions.
Improve panic/assert messages in the queue functions.
Combine queue data and stats into a single data structure
and declare an array of them instead of each queue individually.
Convert command flags, softc state, and softc flags to enums.
sys/dev/xen/blkfront/blkfront.c
Mechanical adjustments for new queue api.
Sponsored by: Spectra Logic Corporation
MFC after: 1 week
This hasn't yet been tested as unfortunately the AR3012 I have doesn't
have the "real" firmware on it; it shipped with the cut down HCI firmware
that only understands enough to accept a new firmware image.
* Linux ath9k (GPIO constants)
NICs which have bluetooth coexistence enabled.
The WB225 NIC has the common antenna switch configuration set to 0x0 which
disables all external switch bit setting. This obviously won't work when
doing coexistence.
This value is a magic value from the windows .inf files. It _looks_ right
but I haven't yet verified it - unfortunately my AR9285+AR3012 BT combo
has an earlier BT device which doesn't actually _have_ firmware on it.
So I have to fix ath3kfw to handle loading in firmware into the newer
NICs before I can finish testing this.
This may not hold true for CUS198, which is another custom AR9485 board.
The bluetooth setup code actually does a channel lookup during setup,
even though we haven't yet programmed in a channel. Sigh.
Tested:
* WB225 (AR9485) + bluetooth
generic mii_phy_reset().
- Return the result of mii_mediachg() rather than blindly returning 0.
- on smsc(4), driver lock should be held to get current
mii_media_active/mii_media_status value.
Reviewed by: yongari
type and id, as compared to virtualised hook points which are now uniquely
identified by type, id and a vid (which for vimage is the pointer to the vnet
that the hhook resides in).
All hhook_head structs for both virtualised and non-virtualised hook points
coexist in hhook_head_list, and a separate list is maintained for hhook points
within each vnet to simplify some vimage-related housekeeping.
Reviewed by: scottl
MFC after: 1 week
* Add the LNA configuration table entries for AR933x/AR9485
* Add a chip-dependent LNA signal level delta in the startup path
* Add a TODO list for the stuff I haven't yet ported over but
I haven't.
Tested:
* AR9462 with LNA diversity enabled
In netif_free(), call ifmedia_removeall() after ether_ifdetach()
so that bpf listeners are detached, any link state processing
is completed, and there is no chance for external reference to media
information.
Suggested by: yongari
MFC after: 1 week
exact same (subsystem) device and vendor IDs. However, the reference
design for the OXu16PCI954 uses a 14.7456 MHz clock (as does the EXSYS
EX-41098-2 equipped with these), while at least the OX16PCI954 defaults
to a 1.8432 MHz one. According to the datasheets of these chips, the
only difference in PCI configuration space is that OXu16PCI954 have
a revision ID of 1 while the other two are at 0. So employ the latter
for determining the default clock rates of this family.
Note that one might think that the actual clock could be derived from
the Clock Prescaler Register (CPR) of these chips. Unfortunately, this
is not that case and its use and content are orthogonal to the frequency
of the crystal employed.
Tested with an EXSYS EX-41098-2, which identifies and attaches as:
pcib4@pci0:19:0:0: class=0x060400 card=0x02dd1014 chip=0x10801b21
rev=0x03 hdr=0x01
vendor = 'ASMedia Technology Inc.'
device = 'ASM1083/1085 PCIe to PCI Bridge'
class = bridge
subclass = PCI-PCI
puc0@pci0:20:4:0: class=0x070006 card=0x00001415 chip=0x95011415
rev=0x01 hdr=0x00
vendor = 'Oxford Semiconductor Ltd'
device = 'OX16PCI954 (Quad 16950 UART) function 0 (Uart)'
class = simple comms
subclass = UART
puc1@pci0:20:4:1: class=0x068000 card=0x00001415 chip=0x95111415
rev=0x01 hdr=0x00
vendor = 'Oxford Semiconductor Ltd'
device = 'OX16PCI954 (Quad 16950 UART) function 1 (8bit bus)'
class = bridge
puc2@pci0:20:8:0: class=0x070006 card=0x00001415 chip=0x95011415
rev=0x01 hdr=0x00
vendor = 'Oxford Semiconductor Ltd'
device = 'OX16PCI954 (Quad 16950 UART) function 0 (Uart)'
class = simple comms
subclass = UART
puc3@pci0:20:8:1: class=0x068000 card=0x00001415 chip=0x95111415
rev=0x01 hdr=0x00
vendor = 'Oxford Semiconductor Ltd'
device = 'OX16PCI954 (Quad 16950 UART) function 1 (8bit bus)'
class = bridge
pci20: <ACPI PCI bus> on pcib4
puc0: <Oxford Semiconductor OX16PCI954 UARTs> port 0x5000-0x501f,
0x5020-0x503f mem 0xc6000000-0xc6000fff,0xc6001000-0xc6001fff irq 16 at
device 4.0 on pci20
uart1: <16950 or compatible> at port 1 on puc0
uart2: <16950 or compatible> at port 2 on puc0
uart3: <16950 or compatible> at port 3 on puc0
uart4: <16950 or compatible> at port 4 on puc0
puc1: <Oxford Semiconductor OX9160/OX16PCI954 UARTs (function 1)> port
0x5040-0x505f,0x5060-0x507f mem 0xc6002000-0xc6002fff,0xc6003000-0xc6003fff
irq 16 at device 4.1 on pci20
puc2: <Oxford Semiconductor OX16PCI954 UARTs> port 0x5080-0x509f,
0x50a0-0x50bf mem 0xc6004000-0xc6004fff,0xc6005000-0xc6005fff irq 16 at
device 8.0 on pci20
uart5: <16950 or compatible> at port 1 on puc2
uart6: <16950 or compatible> at port 2 on puc2
uart7: <16950 or compatible> at port 3 on puc2
uart8: <16950 or compatible> at port 4 on puc2
puc3: <Oxford Semiconductor OX9160/OX16PCI954 UARTs (function 1)> port
0x50c0-0x50df,0x50e0-0x50ff mem 0xc6006000-0xc6006fff,0xc6007000-0xc6007fff
irq 16 at device 8.1 on pci20
MFC after: 2 weeks
check which variant we are on, and if it is a VFPv3 or v4, and has 32
double registers we save these. This fixes VFP support on Raspberry Pi.
While here clean fmrx and fmxr up to use the register names from vfp.h
as opposed to the raw register names.
bitmap using sys/bitset. This is much simpler, has lower space
overhead and is cheaper in most cases.
- Use a second bitmap for invariants asserts and improve the quality of
the asserts as well as the number of erroneous conditions that we will
catch.
- Drastically simplify sizing code. Special case refcnt zones since they
will be going away.
- Update stale comments.
Sponsored by: EMC / Isilon Storage Division
Basically the situation is as follows:
- When using Clang + armv6, we should not need any intrinsics. It should
support it, even though due to a target misconfiguration it does not.
We should fix this in Clang.
- When using Clang + noarmv6, provide __atomic_* functions that disable
interrupts.
- When using GCC + armv6, we can provide __sync_* intrinsics, similar to
what we did for MIPS. As ARM and MIPS are quite similar, simply base
this implementation on the one I did for MIPS.
- When using GCC + noarmv6, disable the interrupts, like we do for
Clang.
This implementation still lacks functions for noarmv6 userspace. To be
done.
- Define __SYNC_ATOMICS in case we're using the __sync_*() API. This is
not used by <stdatomic.h> itself, but may be useful for some of the
intrinsics code to determine whether it should build the
machine-dependent intrinsic functions.
- Make is_lock_free() work in kernelspace. For now, assume atomics in
kernelspace are always lock free. This is a quite reasonable
assumption, as we surely shouldn't implement the atomic fallbacks for
arbitrary sizes.
- When looping, check for the pending suspension. Otherwise, other
usermode thread which races with the looping one, could try to
prevent the process from stopping or exiting.
- Add missed checks for the faults from casuword*(). The code is
structured in a way which makes the loops exit if the specified
address is invalid, since both fuword() and casuword() return -1 on
the fault. But if the address is mapped readonly, the typical value
read by fuword() is different from -1, while casuword() returns -1.
Absent the checks for casuword() faults, this is interpreted as the
race with other thread and causes non-interruptible spinning in the
kernel.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
