Commit Graph

137 Commits

Author SHA1 Message Date
Warner Losh
e96d5d7bb3 Remove dead code (comma is either 0 or 1 for sure, no need to test).
Close /dev/pci when we're done with it.

CID: 1007450, 1007449, 1008615, 1008614
2018-01-05 07:29:02 +00:00
Pedro F. Giffuni
1de7b4b805 various: general adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

No functional change intended.
2017-11-27 15:37:16 +00:00
Pedro F. Giffuni
8a16b7a18f General further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
2017-11-20 19:49:47 +00:00
Bryan Drewery
ea825d0274 DIRDEPS_BUILD: Update dependencies.
Sponsored by:	Dell EMC Isilon
2017-10-31 00:07:04 +00:00
Scott Long
286ab2b514 Add constants and descriptions for some new PCI class definitions 2017-03-13 07:45:15 +00:00
Conrad Meyer
ae9dddfc09 pciconf(8): Replace an assert with errx
The condition can be hit with simple user input, so it isn't an invariant.
Just error out.

PR:		217003
Reported by:	Vladislav V. Prodan <admin at support.od.ua>
Sponsored by:	Dell EMC Isilon
2017-02-11 18:04:43 +00:00
Conrad Meyer
ca7d74d467 pciconf(8): Reallow trailing colon in selectors
Reallow device selectors to have a trailing colon, as documented in the
manual page.  This was broken along with some unrelated cleanups in
r295806.

PR:		215979
Reported by:	David Boyd <David.Boyd49 at twc.com>
Sponsored by:	Dell EMC Isilon
2017-01-12 00:34:37 +00:00
Alexander Motin
a7a560be79 Add names for some DASP devices.
Submitted by:	Dmitry Luhtionov <dmitryluhtionov@gmail.com>
MFC after:	1 week
2016-10-21 15:23:54 +00:00
Eric van Gyzen
a1566487db Fix some logic in PCIe HotPlug; display EI status
The interpretation of the Electromechanical Interlock Status was
inverted, so we disengaged the EI if a card was inserted.
Fix it to engage the EI if a card is inserted.

When displaying the slot capabilites/status with pciconf:

- We inverted the sense of the Power Controller Control bit,
  saying the power was off when it was really on (according to
  this bit).  Fix that.

- Display the status of the Electromechanical Interlock:
        EI(engaged)
        EI(disengaged)

Reviewed by:	jhb
MFC after:	3 days
Sponsored by:	Dell Inc.
Differential Revision:	https://reviews.freebsd.org/D7426
2016-08-05 23:23:48 +00:00
Eitan Adler
cef367e6a1 Don't repeat the the word 'the'
(one manual change to fix grammar)

Confirmed With: db
Approved by: secteam (not really, but this is a comment typo fix)
2016-05-17 12:52:31 +00:00
John Baldwin
0b03514943 Output information about PCI-e devices with slots.
In particular this includes additional information on HotPlug capable
slots.
2016-04-02 01:59:53 +00:00
John Baldwin
c36c6e72c6 Various updates to the PCI-express capability output.
- Group the output so that it follows the capability register set more
  closely.  The first line now contains device information and the
  second line contains link information.  As a result, ARI status is now
  output on the first line, and the link width is moved down to the second
  line of link information.
- Only read the DEVICE_CAP2 register to check for ARI if the capability
  version is >= 2.
- Don't output any link information if the link capability and status
  registers are zero.
- Label the MSI interrupt index value as "MSI" instead of "IRQ".
2016-04-02 01:55:43 +00:00
Pedro F. Giffuni
733191a56c pciconf: Silence a GCC warning.
Fix the build on sparc64 and powerpc.

Taken from:	wma
2016-02-26 23:12:59 +00:00
Wojciech Macek
98179b624c Change format string in pciconf EA to jx
Fix compilation error introduced by r296081
2016-02-26 10:24:24 +00:00
Wojciech Macek
a2862b1169 Add support for Enhanced Allocation in pciconf
* Modified pciconf to print EA capability structure
 * Added register description to pcireg.h

Obtained from:         Semihalf
Sponsored by:          Cavium
Approved by:           cognet (mentor)
Reviewed by:           jhb
Differential revision: https://reviews.freebsd.org/D5440
2016-02-26 08:35:04 +00:00
Stefan Eßer
a28a4d77b6 Fix possible out-of-bounds access detected by Ulrich Spörleins "scan-build".
Some invalid PCI device selectors could cause read access to an initialized
variable next to the array (local loop index variable).

While here, the parser has been made more strict with regard to the syntax
of PCI device selectors as documented in the man-page. E.g. "pci:" used to
be interpreted as "pci0:0".

MFC after:	3 days
2016-02-19 14:01:35 +00:00
Stefan Eßer
873e155c03 Use __unused instead of casting to void to silence the unused parameter
warning.

Fix the indentation of 2 lines to conform with the style of this file.

Submitted by:	jhb
2016-02-18 20:20:36 +00:00
Stefan Eßer
a4ed9e4f78 Make WARNS=6 safe.
Tested with Clang 3.7.1, GCC 4.2.1 and GCC 4.8.5 on amd64.
2016-02-18 15:23:25 +00:00
John Baldwin
15d107308f Add a new -B flag for use with list mode (-l) that lists details about
bridges.  Currently this includes information about what resources a
bridge decodes on the upstream side for use by downstream devices including
bus numbers, I/O port resources, and memory resources.  Windows and bus
ranges are enumerated for both PCI-PCI bridges and PCI-CardBus bridges.

To simplify the implementation, all enumeration is done by reading the
appropriate config space registers directly rather than querying the
bridge driver in the kernel via new ioctls.  This does result in a few
limitations.

First, an unimplemented window in a PCI-PCI bridge cannot be accurately
detected as accurate detection requires writing to the window base
register.  That is not safe for pciconf(8).  Instead, this assumes that
any window where both the base and limit read as all zeroes is
unimplemented.

Second, the PCI-PCI bridge driver in a tree has a few quirks for
PCI-PCI bridges that use subtractive decoding but do not indicate that
via the progif config register.  The list of quirks is duplicated in
pciconf's source.

Reviewed by:	imp
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D4171
2015-11-23 23:48:07 +00:00
John Baldwin
34f2f73c84 Note if relaxed ordering or no snoop is enabled for each PCI-express device.
MFC after:	1 week
2015-11-05 20:24:56 +00:00
Baptiste Daroussin
1ed2002089 Prefer pciids database from ports if present
Given the pciids database on ports is updated more often than the one in base
prefer this version if present, otherwise read the one from base.

MFC after:	1 week
Relnotes:	yes
Differential Revision:	https://reviews.freebsd.org/D3391
2015-09-06 20:05:29 +00:00
Simon J. Gerraty
ccfb965433 Add META_MODE support.
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.

Still need to add real targets under targets/ to build packages.

Differential Revision:       D2796
Reviewed by: brooks imp
2015-06-13 19:20:56 +00:00
Simon J. Gerraty
44d314f704 dirdeps.mk now sets DEP_RELDIR 2015-06-08 23:35:17 +00:00
Simon J. Gerraty
98e0ffaefb Merge sync of head 2015-05-27 01:19:58 +00:00
John Baldwin
179fa75e6e Reassign copyright statements on several files from Advanced
Computing Technologies LLC to Hudson River Trading LLC.

Approved by:	Hudson River Trading LLC (who owns ACT LLC)
MFC after:	1 week
2015-04-23 14:22:20 +00:00
Ryan Stone
7fdbba5e46 Teach pciconf how to dump out SR-IOV capability
Differential Revision:	https://reviews.freebsd.org/D1639
Reviewed by:		jhb
MFC after:		1 month
Sponsored by:		Sandvine Inc.
2015-03-01 00:59:35 +00:00
Dimitry Andric
3f7acdfe6e Fix the following clang 3.6.0 warnings in pciconf:
usr.sbin/pciconf/pciconf.c:237:12: error: address of array 'p->pd_name' will
always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
                            (p->pd_name && *p->pd_name) ? p->pd_name :
                             ~~~^~~~~~~ ~~
usr.sbin/pciconf/pciconf.c:239:12: error: address of array 'p->pd_name' will
always evaluate to 'true' [-Werror,-Wpointer-bool-conversion]
                            (p->pd_name && *p->pd_name) ? (int)p->pd_unit :
                             ~~~^~~~~~~ ~~

The pd_name field of struct pci_conf is an array, so it can never be null.
Remove the unnecessary check.
2015-01-28 21:21:35 +00:00
Simon J. Gerraty
9268022b74 Merge from head@274682 2014-11-19 01:07:58 +00:00
Mark Johnston
d4fef7d342 Fix some buglets in the error-handling of getdevice(). In particular, report
an error if the argument to pciconf -a doesn't have a unit number, rather
than triggering an assertion failure.

PR:		194506
Reported by:	Anthony Cornehl <accornehl@gmail.com>
Sponsored by:	EMC / Isilon Storage Division
2014-10-22 23:35:56 +00:00
Simon J. Gerraty
ee7b0571c2 Merge head from 7/28 2014-08-19 06:50:54 +00:00
Alexander Motin
e887c1dedf Add IOMMU PCI subclass, found on Tyan S8236 motherboard.
Submitted by:	Dmitry Luhtionov <dmitryluhtionov@gmail.com>
MFC after:	2 weeks
2014-05-20 14:39:22 +00:00
Simon J. Gerraty
fae50821ae Updated dependencies 2014-05-16 14:09:51 +00:00
Simon J. Gerraty
76b28ad6ab Updated dependencies 2014-05-10 05:16:28 +00:00
Simon J. Gerraty
3b8f084595 Merge head 2014-04-28 07:50:45 +00:00
Ryan Stone
4cf825f637 Print status of ARI capability in pciconf -c
Teach pciconf how to print out the status (enabled/disabled) of the ARI
capability on PCI Root Complexes and Downstream Ports.

MFC after:	2 months
Sponsored by:	Sandvine Inc.
2014-04-01 16:03:52 +00:00
John Baldwin
84b755dfe5 Add support for displaying VPD for PCI devices via pciconf.
- Store the length of each read-only VPD value since not all values are
  guaranteed to be ASCII values (though most are).
- Add a new pciio ioctl to fetch VPD for a single PCI device.  The values
  are returned as a list of variable length records, one for the device
  name and each keyword.
- Add a new -V flag to pciconf's list mode which displays VPD data for
  each device.

MFC after:	1 week
2014-01-20 20:56:09 +00:00
John Baldwin
c9341dd343 - Allow PCI devices that are attached to a driver to be identified by their
device name instead of just the selector.
- Accept an optional device argument to -l to restrict the output to only
  listing details about a single device.  This is mostly useful in
  conjunction with other flags like -e or -c to allow a user to query
  details about a single device.

MFC after:	1 week
2014-01-20 15:51:02 +00:00
Simon J. Gerraty
d1d0158641 Merge from head 2013-09-05 20:18:59 +00:00
Jung-uk Kim
43a716a640 Decode PCIe ASPM capability and status. 2013-07-18 20:59:58 +00:00
Konstantin Belousov
5d6787cfb2 Decode new HT 3.00 and 3.10 capabilities.
Submitted by:	Dmitry Luhtionov <dmitryluhtionov@gmail.com>
MFC after:	1 week
2013-05-17 14:05:31 +00:00
Simon J. Gerraty
69e6d7b75e sync from head 2013-04-12 20:48:55 +00:00
Simon J. Gerraty
7cf3a1c6b2 Updated dependencies 2013-03-11 17:21:52 +00:00
Simon J. Gerraty
f5f7c05209 Updated dependencies 2013-02-16 01:23:54 +00:00
Neel Natu
f37ba72632 Use the entire 64 bits of 'bar.pbi_length' when printing the bar size.
This allows bar sizes greater than or equal to 4GB to be displayed correctly.
2013-02-10 19:35:40 +00:00
David E. O'Brien
d9a447559b Sync with HEAD. 2013-02-08 16:10:16 +00:00
John Baldwin
0895e9c70c Install <dev/agp/agpreg.h> and <dev/pci/pcireg.h> as userland headers
in /usr/include.

MFC after:	2 weeks
2013-02-05 18:55:09 +00:00
Neel Natu
609933c61b Display MSI-X table and PBA offsets when displaying information about MSI-X
capability.

Reviewed by:	jhb, jimharris (initial version)
2013-02-01 19:24:16 +00:00
Simon J. Gerraty
23090366f7 Sync from head 2012-11-04 02:52:03 +00:00
Jim Harris
ff473561da For PCI Express capability, if max link width is greater than zero, print
the current and max link speed.

Sponsored by:	Intel
Discussed with:	jhb
MFC after:	1 week
2012-10-25 17:22:37 +00:00
Warner Losh
db85bb0492 Indent ecaps the same way we indent caps.
MFC after:	3 days
2012-10-19 22:48:22 +00:00