ever working correctly: the code was linking the QHs together but
then immediately overwriting the "next" pointers. Oops. Also
initialise qh_endphub, since the EHCI spec says that we should
always set the pipe multiplier field to something sensible.
This appears to make basic split transactions work, so enable split
transactions for control, bulk and interrupt pipes (split isochronous
transfers are not yet implemented). It should now be possible to
use USB1 devices even when they are connected through a USB2 hub.
seem to be necessary anymore, and it prevents tasting a valid drive
when booting with geom_vinum already loaded, since SCSI disks set their
sectorsize not until first opening them.
from an mbuf into the fxp_encap() function, as done in other drivers.
- Don't waste time calling bus_dmamap_load_mbuf() if we know the mbuf
chain is too long to fit in a TX descriptor, call m_defrag() first.
- Convert fxp(4) to use bus_dmamap_load_mbuf_sg().
for the duration of the send() call. Such approach may be less than ideal
in threading environment, when several threads share the same socket and it
might happen that several of them are calling linux_send() at the same time
with and without SO_NOSIGPIPE set.
However, such race condition is very unlikely in practice, therefore this
change provides practical improvement compared to the previous behaviour.
PR: kern/76426
Submitted by: Steven Hartland <killing@multiplay.co.uk>
MFC after: 3 days
at some point result in a status event being triggered (it should
be a link down event: the Microsoft driver design guide says you
should generate one when the NIC is initialized). Some drivers
generate the event during MiniportInitialize(), such that by the
time MiniportInitialize() completes, the NIC is ready to go. But
some drivers, in particular the ones for Atheros wireless NICs,
don't generate the event until after a device interrupt occurs
at some point after MiniportInitialize() has completed.
The gotcha is that you have to wait until the link status event
occurs one way or the other before you try to fiddle with any
settings (ssid, channel, etc...). For the drivers that set the
event sycnhronously this isn't a problem, but for the others
we have to pause after calling ndis_init_nic() and wait for the event
to arrive before continuing. Failing to wait can cause big trouble:
on my SMP system, calling ndis_setstate_80211() after ndis_init_nic()
completes, but _before_ the link event arrives, will lock up or
reset the system.
What we do now is check to see if a link event arrived while
ndis_init_nic() was running, and if it didn't we msleep() until
it does.
Along the way, I discovered a few other problems:
- Defered procedure calls run at PASSIVE_LEVEL, not DISPATCH_LEVEL.
ntoskrnl_run_dpc() has been fixed accordingly. (I read the documentation
wrong.)
- Similarly, the NDIS interrupt handler, which is essentially a
DPC, also doesn't need to run at DISPATCH_LEVEL. ndis_intrtask()
has been fixed accordingly.
- MiniportQueryInformation() and MiniportSetInformation() run at
DISPATCH_LEVEL, and each request must complete before another
can be submitted. ndis_get_info() and ndis_set_info() have been
fixed accordingly.
- Turned the sleep lock that guards the NDIS thread job list into
a spin lock. We never do anything with this lock held except manage
the job list (no other locks are held), so it's safe to do this,
and it's possible that ndis_sched() and ndis_unsched() can be
called from DISPATCH_LEVEL, so using a sleep lock here is
semantically incorrect. Also updated subr_witness.c to add the
lock to the order list.
- "options" is followed by the characters \040\011, not \011\011.
Correct both my own sins and those of others.
- Comment blocks start and end with an empty line ^#$.
- Remove non-standard comments added in my last commit.
Requested by: njl
Correctness confirmed by: bde
since there are often significant holes in the memory map due to the
kernel, loader and OFW data structures not being included: Maxmem is
the highest available, so can be misleading.
them all, otherwise the driver will be useless and will only confuse user
as manual page says nothing about the need to enable one of those frame
types explicitly in the kernel config.
PR: kern/47152
Submitted by: Andriy Gapon <avg@icyb.net.ua>
MFC after: 3 days
as we can't rely on a trap happening, as it is done normally.
While I'm there, uncomment the call to cpu_dcache_wbinv_range() in
pmap_kenter_internal, as we don't call cpu_dcache_wbinv_all() there anymore.
asynchronously by different threads. Thus, declare as volatile the
reference count that is accessed through m_ext's pointer, ref_cnt.
Revert the previous change, revision 1.144, that casts as volatile a
single dereference of ref_cnt.
Reviewed by: bmilekic, dwhite
Problem reported by: kris
MFC after: 3 days
for a signal, because kernel stack is swappable, this causes page fault
in kernel under heavy swapping case. Fix this bug by eliminating unneeded
code.
Change fhc(4) to use IRQ numbers instead of RIDs for allocating the
IRQs of children. This works similar to e.g. sbus(4), i.e. add the
IRQ resources as fully specified to the resource lists of the children,
allocate them like normal. When establishing the interrupt search the
interrupt maps of the children for a matching INO to determine which
map we need to write the fully specified interrupt number to and to
enable the mapping (before the RID was used to indicate which interrupt
map to use).
- dev/puc/puc.c:
Revert rev. 1.38, with the above change fhc(4) no longer needs special
treatment for allocating IRQs.
Thanks to: joerg for providing access to an E3500
modulating the STPCLK# pin based on the duty cycle. Since p4tcc uses the
same mechanism (but internal to the CPU), we triggered a hang on some
systems at low frequencies when both were in use. Now, disable
acpi_throttle when p4tcc is also present.
Tested by: Kevin Oberman
- Use FBSDID.
- Remove unused macro.
- Use auto-generated typedefs for the prototypes of the bus and device
interface functions.
- Terminate the output of device_printf(9) with a newline char.
- Honour the return values of malloc(), OF_getprop(), etc.
- Use __func__ instead of hardcoded function names.
- Print the physical slot number and the board model on attach.
MFC after: 1 month
- Use FBSDID.
- Remove an unused include.
- Use auto-generated typedefs for the prototypes of the device interface
functions.
- Terminate the output of device_printf(9) with a newline char.
- Honour the return value of malloc(3).
MFC after: 1 month
with no associated data. Also revert previous changes that allocate off
of the stack instead of using malloc, as it's not needed. Many thanks to
LSI for investigating and fixing these problems.
Submitted by: rajeshpr @ lsil . com
panic with the NDISulator if you did "ifconfig ndis0 10.0.0.1/24,"
whereas "ifconfig ndis0 10.0.0.1/24 up" worked fine. The double fault
was caused by the ifconfig thread running out of kernel stack space.
(This was partly due to the NDIsulator using a couple of big buffers on
the stack, but even after fixing that the double fault persisted.)
It turns out that ndis_init() is called in both cases, but in the first
case the code path passes through ieee80211_ioctl(), and it turns out
ieee80211_ioctl() consumes a whopping 2400 bytes of stack space.
Apparently, gcc -O2 causes the ieee80211_ioctl_get80211() routine to
be inlined into ieee80211_ioctl(), and for some reason which I do not
fully understand, this causes ieee80211_ioctl() to consume an extra 2K
of stack space.
To prevent this overly agressive optimization, ieee80211_ioctl_get80211()
is now declared with __attribute__ ((noinline)). With this change,
ieee80211_ioctl() now only reserves about 200 bytes of stack instead of 2400.
create kernel threads and call rfork(2) with RFTHREAD flag set in this case,
which puts parent and child into the same threading group. As a result
all threads that belong to the same program end up in the same threading
group.
This is similar to what linuxthreads port does, though in this case we don't
have a luxury of having access to the source code and there is no definite
way to differentiate linux_clone() called for threading purposes from other
uses, so that we have to resort to heuristics.
Allow SIGTHR to be delivered between all processes in the same threading
group previously it has been blocked for s[ug]id processes.
This also should improve locking of the same file descriptor from different
threads in programs running under linux compat layer.
PR: kern/72922
Reported by: Andriy Gapon <avg@icyb.net.ua>
Idea suggested by: rwatson
precision when IP packet may travel through internet for several seconds.
Also uptime measured in milliseconds overflows every 48+ days.
But we have to do same to keep compatibility with Cisco and flow-tools.
Make a macro MILLIUPTIME, which does overflowable multiplication to 1000.
Requested by: Sergey Ryabin, Oleg Bulyzhin
MFC after: 1 week
both consuming 1K of stack space. This is unfriendly. Allocate the buffers
off the heap instead. It's a little slower, but these aren't performance
critical routines.
Also, add a spinlock to NdisAllocatePacketPool(), NdisAllocatePacket(),
NdisFreePacketPool() and NdisFreePacket(). The pool is maintained as a
linked list. I don't know for a fact that it can be corrupted, but why
take chances.
a libalias application (e.g. natd, ppp, etc.) to crash. Note: Skinny support
is not enabled in natd or ppp by default.
Approved by: secteam (nectar)
MFC after: 1 day
Secuiryt: This fixes a remote DoS exploit
call vector which was added in rev. 1.52. This change was done way before
sparc64 switched to a 64-bit time_t so all binaries are expected to have
been recompiled by now.
aid for ABI breakages caused by system call changes. These changes were
done way before sparc64 switched to a 64-bit time_t so all binaries are
expected to have been recompiled by now.
a vlan interface attached to a fxp(4) card when it has not been
initialized yet. We now set the links from our internel TX descriptor
structure to the TX command blocks at attach time rather than at init
time. While I'm here, slightly improve the style in fxp_attach().
PR: kern/78112
Reported by: Gavin Atkinson <gavin.atkinson@ury.york.ac.uk> and others
Tested by: flz, Gavin Atkinson <gavin.atkinson@ury.york.ac.uk>
MFC after: 1 week
place.
This moves the dependency on GCC's and other compiler's features into
the central sys/cdefs.h file, while the individual source files can
then refer to #ifdef __COMPILER_FEATURE_FOO where they by now used to
refer to #if __GNUC__ > 3.1415 && __BARC__ <= 42.
By now, GCC and ICC (the Intel compiler) have been actively tested on
IA32 platforms by netchild. Extension to other compilers is supposed
to be possible, of course.
Submitted by: netchild
Reviewed by: various developers on arch@, some time ago
We need to be able to test for the (possible) non-existence of the
FPSWA code.
PR: ia64/77591
Submitted by: Christian Kandeler (christian dot kandeler at hob dot de)
MFC after: 1 day
set the interrupt handler to be INTR_MPSAFE now that xpt_done() can be
called without Giant. Giant is still on the top half of the driver and
the timeout handlers.
timer case:
- Remove the virtual fooclock interrupt counters as they have served their
purpose.
- Adjust the dividers for the different clock such that profhz is now a
multiple of stathz as in the non-lapic case, and the timer now runs at
hz * 2 rather than hz * 3. With the new divisors, the default clock
rates are:
kern.clockrate: { hz = 1000, tick = 1000, profhz = 666, stathz = 133 }
sleeping, so in do_tdsignal, we no longer need to test td_waitset.
now td_waitset is only used to give a thread higher priority when
delivering signal to multithreads process.
This also fixes a bug:
when a thread in sigwait states was suspended and later resumed
by SIGCONT, it can no longer receive signals belong to waitset.
with shared IRQs in case the bus code, MD interrupt code, etc. permits.
Together with sys/sparc64/sparc64/intr_machdep.c rev. 1.21 this fixes
an endless loop in uart_intr() when using the second NS16550 on the ISA
bus of sparc64 machines.
- Destroy the hardware mutex on detach and in case attaching fails.
Approved by: marcel
for this are the on-board SCCs and UARTs that use a shared IRQ. [1]
- Rework the interrupt counting code to account for shared interrupts. [1]
- In case ithread_add_handler() failed in inthand_add() just return with
the error code instead of setting up a non-fast handler regardless or
setting up a non-fast handler instead of a fast handler. I can't think
of a situation where the former behaviour would do the right thing.
Reviewed by: marcel [1]
Based on: sys/i386/i386/intr_machdep.c [1]
- Use FBSDID.
- Use uintXX_t instead of u_intXX_t.
- Be consistent with white-space.
- Mark some globals as static.
- Add a missing prototype.
- Remove a unused variable.
- etc.
Failure to do this will result in following ata_pio_read() calls walking
off the end of the read buffer.
This resolves the "memory modified after free" panics common with Thinkpads
and CD/DVD drives.
Submitted by: Nate Lawson <nate AT root.org>
idle the 'mask' variable could be set to 0, resulting in the timeout loop
running for the full 31 seconds.
Handling this case eliminates long hangs on resume on some systems.
Submitted by: Nate Lawson <nate AT root.org>
and the X1034A (quad HME; QFE) cards the X1033A (single HME) don't have a
PCI-PCI-bridge so we can't rely on the PCI slot number being useable as
index for the network address to read from the VPD on the latter. Use
the end tag to determine whether it is a QFE VPD with 4 NAs and only use
the slot number as index in this case.
- Remove a useless check.
Prodded by: joerg
Additional testing by: joerg
MFC after: 1 day
malloc(sizeof(device_object), ...) by mistake. Correct this, and
rename "dobj" to "drv" to make it a bit clearer what this variable
is supposed to be.
Spotted by: Mikore Li at Sun dot comnospamplzkthx
attached to a parent interface we use its mutex to lock the softc. This
means that in several places like carp_ioctl() we lock softc conditionaly.
This should be redesigned.
To avoid LORs when MII announces us a link state change, we schedule
a quick callout and call carp_carpdev_state_locked() from it.
Initialize callouts using NET_CALLOUT_MPSAFE.
Sponsored by: Rambler
Reviewed by: mlaier
- In carp_send_ad_all() walk through list of all carp interfaces
instead of walking through list of all interfaces.
Sponsored by: Rambler
Reviewed by: mlaier
its return value and free resources if function returns error. Plug
several memory leaks with this change.
Submitted by: archie
Found by: Coverity Prevent analysis tool
o usb_subr.c, add delta 1.119:
Move usb_get_string() and make it public.
o usbdi.c, bring on par with 1.106, this includes:
- Make an iterator abstraction for looping through all descriptors.
- Whine about not being able to figure out default language if we are debugging.
- Move usb_get_string() and make it public.
o usbdi.h, bring on par with 1.64, this includes:
- Make an iterator abstraction for looping through all descriptors.
- Move usb_get_string() and make it public.
o usbdi_util.c, bring on par with 1.42, this includes:
- Add usbd_get_protocol().
- Use NULL instead of 0.
- Fix (mostly harmless) typo.
- Move utility routine from uirda.c to usbdi_util.c.
o usbdi_util.h, bring on par with 1.31, this includes:
- Add usbd_get_protocol().
- Move utility routine from uirda.c to usbdi_util.c.
MFC after: 3 days
is particularly useful when VESA is available (either `options VESA'
or load the vesa module), as BIOSes in some notebooks may correctly
save and restore LCD panel settings using VESA in cases where calling
the video BIOS POST is not effective. On some systems it may also
be necessary to set the hw.acpi.reset_video sysctl to 0.
Also save the DAC state, increase the maximum save state size from
4k to 8k, and refuse to save the VESA state if the BIOS reports it
is larger than the maximum size we can handle.
It doesn't appear that anything currently uses this code, but it
turns out to be capable of restoring some notebook displays to a
working state after a suspend-resume cycle.
if either INVARIANTS or INVARIANT_SUPPORT is defined so that kernel modules
that want to use mtx_assert() only need to define INVARIANTS.
MFC after: 1 week
attempting to change the BPF filter on a BPF descriptor at the same
time: retrieve the old filter pointer under the same locked region
as setting the new pointer.
MFC after: 3 days
- Use our loop DLT type, not OpenBSD. [1]
- The fields that are converted to network byte order are not 32-bit
fields but 16-bit fields, so htons should be used in htonl. [1]
- Secondly, ip_input changes ip->ip_len into its value without
the ip-header length. So, restore the length to make bpf happy. [1]
- Use bpf_mtap2(), use temporary af1, since bpf_mtap2 doesn't
understand uint8_t af identifier.
Submitted by: Frank Volf [1]
yet I only changed one of them. So when we loaded drivers, we'd fail
to allocate resources correct.
This pointed out that we were doing the wrong thing when we failed to
attach a child. We released all the resources and almost deleted the
child. Instead, we should keep the resources allocated so when/if a
driver is loaded, we can go w/o having to allocate them. We use
pci_cfg_save/restore to restore the BARs with these resources.
This seems to fix the problems that we were seeing that I thought
might have magically gone away in the last revision of cardbus.c (but
really didn't).
Noticed by: avatar (nicely done!)
shared-last-sector problem.
After this change, even if there is more than one provider with the same
last sector, the proper one will be chosen based on its size.
It still doesn't fix the 'c' partition problem (when da0s1 can be confused
with da0s1c) and situation when 'a' partition starts at offset 0
(then da0s1a can be confused with da0s1 and da0s1c). One can use '-h'
option there, when creating device or avoid sharing last sector.
Actually, when providers share the same last sector and their size is equal,
they provide exactly the same data, so the name (da0s1, da0s1a, da0s1c)
isn't important at all.
- Provide backward compatibility.
- Update copyright's year.
MFC after: 1 week
- Add debug.watchdog tunable, so we can specify watchdog CPU from loader
which will help to debug hangs on boot.
- Remove 'U' from debug.watchdog sysctl definition, so if we set it to '-1'
it really shows '-1'.
- Fix comment.
ignore the sack options in that segment. Else we'd end up
corrupting the scoreboard.
Found by: Raja Mukerji (raja at moselle dot com)
Submitted by: Mohan Srinivasan
m_pullup. icmp6_notify_error continued to use the old pointer,
which after the m_pullup is not suitable as a packet header any
longer (see m_move_pkthdr).
and this is what causes the kernel panic in sbappendaddr later on.
PR: kern/77934
Submitted by: Gerd Rausch <gerd@juniper.net>
MFC after: 2 days
code requires it to be 0 when a jumbo payload option is contained.
PR: kern/77934
Submitted by: Gerd Rausch <gerd@juniper.net>
Obtained from: KAME
MFC after: 2 days
testing it to know whether we should enable the 82503 serial mode...
Move code to the right location and disallow the use of the 82503
serial mode if the sc->revision field is 0 again. This makes fxp(4)
work correctly with ATMEL 350 93C46 cards (3 port 82559 based with a
82555 PHY), as well as with the older ATMEL 220 93C46 (same flavour)
and with the even older 10Mbps-only 82557 cards with the 82503 serial
interface.
Tested by: Andre Albsmeier <andrer@albsmeier.net>, krion
MFC after: 2 weeks
SMP systems. It appears all drivers except ichss should attach to each
CPU and that settings should be performed on each CPU. Add comments about
this. Also, add a guard for p4tcc's identify method being called more than
once.
debug.cpufreq.lowest tunable and sysctl. Some systems seem to have problems
with the lowest frequencies so setting this prevents them from being
available or used.
introducing the disk formats for _RuneLocale and friends.
The disk formats do not have (useless) pointers and have 32-bit
quantities instead of rune_t and long. (htonl(3) only works
with 32-bit quantities, so there's no loss).
Bootstrap mklocale(1) when necessary. (Bootstrapping from 4.x
would be trivial (verified), but we no longer provide pre-5.3
source upgrades and this is the first commit to actually break
it.)
ARM_TP_ADDRESS, where the tp will be stored. On CPUs that support it, a cache
line will be allocated and locked for this address, so that it will never go
to RAM. On CPUs that does not, a page is allocated for it (it will be a bit
slower, and is wrong for SMP, but should be fine for UP).
The tp is still stored in the mdthread struct, and at each context switch,
ARM_TP_ADDRESS gets updated.
Suggested by: davidxu
uart(4) to support the Zilog 8530 SCCs which hang off of a FireHose
bus on Sun E4000/E5000 class machines.
Beside the fact that a puc_fhc.c would just be a copy of puc_sbus.c
with s,sbus,fhc,g the reason why the declaration for fhc(4) was
sticked into puc_sbus.c is that both of these front-ends for puc(4)
will go away once there is a scc(4).
Discussed with: marcel
Tested by: hrs, kris
MFC after: 3 days
both a scc(4) is under way and fhc(4) will be change to use INOs this
shouldn't stay in HEAD for too long but we need a MFC-able solution
for FreeBSD 5.4.
Discussed with: marcel
Tested by: hrs, kris
MFC after: 3 days
that describe a buffer of variable size). The problem is, allocating
MDLs off the heap is slow, and it can happen that drivers will allocate
lots and lots of lots of MDLs as they run.
As a compromise, we now do the following: we pre-allocate a zone for
MDLs big enough to describe any buffer with 16 or less pages. If
IoAllocateMdl() needs a MDL for a buffer with 16 or less pages, we'll
allocate it from the zone. Otherwise, we allocate it from the heap.
MDLs allocate from the zone have a flag set in their mdl_flags field.
When the MDL is released, IoMdlFree() will uma_zfree() the MDL if
it has the MDL_ZONE_ALLOCED flag set, otherwise it will release it
to the heap.
The assumption is that 16 pages is a "big number" and we will rarely
need MDLs larger than that.
- Moved the ndis_buffer zone to subr_ntoskrnl.c from kern_ndis.c
and named it mdl_zone.
- Modified IoAllocateMdl() and IoFreeMdl() to use uma_zalloc() and
uma_zfree() if necessary.
- Made ndis_mtop() use IoAllocateMdl() instead of calling uma_zalloc()
directly.
Inspired by: discussion with Giridhar Pemmasani
clock time to uptime because wall clock time may go backwards.
This is a change in the API which will impact SNMP agents who are using
ifi_epoch to set RFC2233's ifCounterDiscontinuityTime. None are know to
exist today. This will not impact applications that are using the
<index, epoch> tuple to verify interface uniqueness except that it
eliminates a race which could lead to a false assumption of uniqueness.
Because this is a behavior change, bump __FreeBSD_version.
Discussed with: re (jhb, scottl)
MFC after: 3 days
Pointed out by: pkh (way back at EuroBSDCon)
Pointy hat: brooks
o change the mapping arrays to have a zero offset rather than base 1;
this eliminates lots of signo adjustments and brings the code
back inline with the original netbsd code
o purge use of SVR4_SIGTBLZ; SVR4_NSIG is the only definition for
how big a mapping array is
o change the mapping loops to explicitly ignore signal 0
o purge some bogus code from bsd_to_svr4_sigset
o adjust svr4_sysentvec to deal with the mapping table change
Enticed into fixing by: Coverity Prevent analysis tool
Glanced at by: marcel, jhb
owned by a process when it forks, and creates a matching set of references
for the child process, as prescribed by POSIX.
In order to avoid races with other threads in the parent process during
fork(), it is necessary to allocate a temporary reference list while
holding the sem_lock, then transfer those references to the new process
once the sem_lock is released. The implementation is inefficient but
appears functional; in order to improve the efficiency, it will be
necessary to modify the existing structures and logic, which generally
rely on O(n) operations over the global set of semaphores.
PAGE_SIZE.
Unlike originator of the PR suggests retain MAXSHELLCMDLEN definition
(he has been proposing to replace it with PAGE_SIZE everywhere), not only
this reduced the diff significantly, but prevents code obfuscation and also
allows to increase/decrease this parameter easily if needed.
PR: kern/64196
Submitted by: Magnus Bäckström <b@etek.chalmers.se>
doesn't change functionality, but makes code more logical.
Obtained from: DrafonFlyBSD
o Use VOP_GETATTR() to obtain actual size of file and parse no more than that.
Previously, we parsed MAXSHELLCMDLEN characters regardless of the actual file
size. This makes the following working:
$ printf '#!/bin/echo' > /tmp/test.sh
$ chmod 755 /tmp/test.sh
$ /tmp/test.sh
Previously, attempts to execve() that shell script has been failing with bogus
ENAMETOOLONG.
PR: kern/64196
Submitted by: Magnus B.ckstr.m <b@etek.chalmers.se>
- Simplify CARP_LOG() and making it working (we don't have addlog in FreeBSD).
- Introduce CARP_DEBUG() which logs with LOG_DEBUG severity when
net.inet.carp.log > 1
- Use CARP_DEBUG to log state changes of carp interfaces.
After CARP_LOG() cleanup it appeared that carp_input_c() does not need sc
argument. Remove it.
Sponsored by: Rambler
script. Otherwise it's possible to panic kernel by constructing a shell
script with first line not ending in '\n'.
Also, treat '\0' as line terminating character, which may me useful in
some situations.
Submitted by: gad
- store assigned PCI addresses at cninit time for later mmap range
check
- implement set_border to scrub X remnants when switching back to VTYs
- implement mmap, only allowing addresses within the range of the
console adapter.
for a given device in some circumstances, so move the PDO creation
to the attach routine so we don't end up creating two PDOs.
Also, when we skip the call to ndis_convert_res() in if_ndis.c:ndis_attach(),
initialize sc->ndis_block->nmb_rlist to NULL. We don't explicitly zero
the miniport block, so this will make sure ndis_unload_driver() does
the right thing.
when we create a PDO, the driver_object associated with it is that
of the parent driver, not the driver we're trying to attach. For
example, if we attach a PCI device, the PDO we pass to the NdisAddDevice()
function should contain a pointer to fake_pci_driver, not to the NDIS
driver itself. For PCI or PCMCIA devices this doesn't matter because
the child never needs to talk to the parent bus driver, but for USB,
the child needs to be able to send IRPs to the parent USB bus driver, and
for that to work the parent USB bus driver has to be hung off the PDO.
This involves modifying windrv_lookup() so that we can search for
bus drivers by name, if necessary. Our fake bus drivers attach themselves
as "PCI Bus," "PCCARD Bus" and "USB Bus," so we can search for them
using those names.
The individual attachment stubs now create and attach PDOs to the
parent bus drivers instead of hanging them off the NDIS driver's
object, and in if_ndis.c, we now search for the correct driver
object depending on the bus type, and use that to find the correct PDO.
With this fix, I can get my sample USB ethernet driver to deliver
an IRP to my fake parent USB bus driver's dispatch routines.
- Add stub modules for USB support: subr_usbd.c, usbd_var.h and
if_ndis_usb.c. The subr_usbd.c module is hooked up the build
but currently doesn't do very much. It provides the stub USB
parent driver object and a dispatch routine for
IRM_MJ_INTERNAL_DEVICE_CONTROL. The only exported function at
the moment is USBD_GetUSBDIVersion(). The if_ndis_usb.c stub
compiles, but is not hooked up to the build yet. I'm putting
these here so I can keep them under source code control as I
flesh them out.
right for certain MAP_FIXED mappings on ia64 but it will work fine for all
other mappings and works fine on amd64.
Requested by: ps, Christian Zander
MFC after: 1 week
