Fix some execution bugs in the dtrace powerpc asm. addme pulls in the carry
flag which we don't want, and the result wasn't recorded anyways, so the
following beq to check for exit condition wasn't checking the right
condition.
Simplify the stack walking in dtrace_isa.c, so there's only a single walker
that handles both pc and sp. This should make it easier to follow, and any
bugfix that may be needed for walking only needs to be made in one place
instead of two now.
MFC after: 2 weeks
It simply doesn't work in general since VCPUs may migrate between
physical cores. The approach used to measure skew also doesn't
make much sense in a VM.
PR: 218452
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
fasttrap hooks the userspace breakpoint handler; the hook looks up the
breakpoint address in a hash table of tracepoints. It is possible for
the tracepoint to be removed by a different thread in between the
breakpoint trap and the hash table lookup, in which case SIGTRAP gets
delivered to the target process. Fix the problem by adding a
per-process generation counter that gets incremented when a tracepoint
belonging to that process is removed. Then, when a lookup fails, the
trapping instruction is restarted if the thread's counter doesn't match
that of the process.
Reviewed by: cem
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19273
dtrace has its own routines which were not updated after SMAP support got
implemented. Use ifunc just like for other routines.
This in particular fixes ustack().
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18542
The FBT fuction boundary prober was setting one return probe marker value,
but the dtrace handler was expecting another. This causes a hang when
tracing return probes.
There seems to be a race in CI, such that dtrace_asm.S might be assembled
before the genassym is completed. This causes a build failure when PSL_EE
doesn't exist, and is read as 0. Get around this by explicitly specifying
the bits in the mask instead.
- Remove the arm64-specific cpu_*cache* and cpu_tlb_flush* functions.
Instead, add RISC-V specific inline functions in cpufunc.h for the
fence.i and sfence.vma instructions.
- Catch up to changes in the arm64 pmap and remove all the cpu_dcache_*
calls, pmap_is_current, pmap_l3_valid_cacheable, and PTE_NEXT bits from
pmap.
- Remove references to the unimplemented riscv_setttb().
- Remove unused cpu_nullop.
- Add a link to the SBI doc to sbi.h.
- Add support for a 4th argument in SBI calls. It's not documented but
it seems implied for the asid argument to SBI_REMOVE_SFENCE_VMA_ASID.
- Pass the arguments from sbi_remote_sfence*() to the SEE. BBL ignores
them so this is just cosmetic.
- Flush icaches on other CPUs when they resume from kdb in case the
debugger wrote any breakpoints while the CPUs were paused in the IPI_STOP
handler.
- Add SMP vs UP versions of pmap_invalidate_* similar to amd64. The
UP versions just use simple fences. The SMP versions use the
sbi_remove_sfence*() functions to perform TLB shootdowns. Since we
don't have a valid pm_active field in the riscv pmap, just IPI all
CPUs for all invalidations for now.
- Remove an extraneous TLB flush from the end of pmap_bootstrap().
- Don't do a TLB flush when writing new mappings in pmap_enter(), only if
modifying an existing mapping. Note that for COW faults a TLB flush is
only performed after explicitly clearing the old mapping as is done in
other pmaps.
- Sync the i-cache on all harts before updating the PTE for executable
mappings in pmap_enter and pmap_enter_quick. Previously the i-cache was
only sync'd after updating the PTE in pmap_enter.
- Use sbi_remote_fence() instead of smp_rendezvous in pmap_sync_icache().
Reviewed by: markj
Approved by: re (gjb, kib)
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D17414
With GNU ifuncs, multiple FBT probes may correspond to the same
instruction. fbt_invop() assumed that this could not happen and
would return after the first probe found in the global FBT hash
table, which might not be the one that's enabled. Fix the problem
on x86 by linking probes that share a tracepoint and having each
linked probe fire when the tracepoint is hit.
PR: 230846
Approved by: re (gjb)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16921
Even though there do appear to be more artificial frames, with 12, stack
traces no longer list at all. Revert until a better, more stable value can
be determined.
unwind_frame() may be instrumented by FBT, leading to recursion into
dtrace_probe(). Manually inline unwind_frame() as we do with stack
unwinding code for other architectures.
Submitted by: Domagoj Stolfa
Reviewed by: manu
MFC after: 1 week
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D15359
While here predict false.
Note the code is wrong (regardless of this change). Dereference of the
pointer can race with module unload. A fix would set the probe to a
nop stub instead of NULL.
Each malloc/free was testing dtrace_malloc_enabled and forcing
extra reads from the malloc type struct to see if perhaps a
dtmalloc probe was on.
Treat it like lockstat and sdt: have a global bolean.
This helps catch cases where an instrumented function is called while
in probe context.
Submitted by: Domagoj Stolfa <domagoj.stolfa@gmail.com>
MFC after: 2 weeks
Sponsored by: DARPA/AFRL
Differential Revision: https://reviews.freebsd.org/D14863
These have been supplanted by the MI signal information codes in
<sys/signal.h> since 7.0. The FPE_*_TRAP ones were deprecated even
earlier in 1999.
PR: 226579 (exp-run)
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D14637
assym is only to be included by other .s files, and should never
actually be assembled by itself.
Reviewed by: imp, bdrewery (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D14180
dtrace_gethrtime() may be called outside of probe context, and in
particular, from the DTRACEIOC_BUFSNAP handler.
Disable interrupts rather than using sched_pin() to help ensure that
we don't call any external functions when in probe context.
PR: 218452
MFC after: 1 week
Turn on the required options in the ERL config file, and ensure
that the fbt module is listed as a dependency for mips in
the modules/dtrace/dtraceall/dtraceall.c file.
PR: 220346
Reviewed by: gnn, markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12227
o Replace __riscv64 with (__riscv && __riscv_xlen == 64)
This is required to support new GCC 7.1 compiler.
This is compatible with current GCC 6.1 compiler.
RISC-V is extensible ISA and the idea here is to have built-in define
per each extension, so together with __riscv we will have some subset
of these as well (depending on -march string passed to compiler):
__riscv_compressed
__riscv_atomic
__riscv_mul
__riscv_div
__riscv_muldiv
__riscv_fdiv
__riscv_fsqrt
__riscv_float_abi_soft
__riscv_float_abi_single
__riscv_float_abi_double
__riscv_cmodel_medlow
__riscv_cmodel_medany
__riscv_cmodel_pic
__riscv_xlen
Reviewed by: ngie
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11901
Close a potential race in reading the CPU dtrace flags, where a thread can
start on one CPU, and partway through retrieving the flags be swapped out,
while another thread traps and sets the CPU_DTRACE_NOFAULT. This could
cause the first thread to return without handling the fault.
Discussed with: markj@
The idle thread may process callouts while reloading the timer in
cpu_activeclock(). In this case, provide a representative value, &cpu_idle,
instead of 0 for args[0] so that the active thread can be more easily
identified from the probe.
This addresses intermittent failures of the profile-n/tst.argtest.d test.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D10651
The current method only sort of works, and usually doesn't work reliably.
Also, on Book-E the return address from DEBUG exceptions is not the sentinel
addresses, so it won't exit the loop correctly.
Fix this by better handling trap frames during unwinding, and using the
common trap handler for debug traps, as the code in that segment is
identical between the two.
MFC after: 1 week
r314370 changed EXC_DTRACE to a different instruction, but neglected to
make the same change to fbt, so dtrace didn't actually pick it up,
resulting in entering KDB instead of trapping for dtrace.
MFC after: 1 week
The MFC will include a compat definition of smp_no_rendevous_barrier()
that calls smp_no_rendezvous_barrier().
Reviewed by: gnn, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D10313
dtrace_trap() consumes page and protection faults triggered by code running
in DTrace probe context. Such faults occur with interrupts disabled and are
detected using a per-CPU flag. Regular faults cause dtrace_trap() to be
called with interrupts enabled, and nothing was ensuring that the flag was
read from the correct CPU. This may result in dtrace_trap() consuming
unrelated page and protection faults when DTrace is enabled, causing the
fault handler to return without actually having handled the fault.
Diagnosed by: Ryan Libby <rlibby@gmail.com>
MFC after: 3 days
Sponsored by: Dell EMC Isilon
When recording probe site addresses in the output DOF file, dtrace -G
needs to emit relocations for the .SUNW_dof section in order to obtain
the addresses of functions containing probe sites. DTrace expects the
addresses to be relative to the base address of the final ELF file,
and the amd64 USDT implementation was relying on some unspecified and
incorrect behaviour in the base system GNU ld to achieve this.
This change reimplements the probe site relocation handling to allow
USDT to be used with lld and newer GNU binutils. Specifically, it
makes use of R_X86_64_PC64/R_386_PC32 relocations to obtain the
probe site address relative to the DOF file address, and adds and uses a
new DOF relocation type which computes the final probe site address using
these relative offsets.
Reported by and discussed with: Rafael Espíndola
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D9374
This corresponds to the following illumos issues:
5755 want support for Intel FMA instrs
5756 want support for Intel BMI1 instrs
5757 want support for Intel BMI2 instrs
5758 want support for Intel AVX2 instrs
7204 Want broadwell rdseed and adx support
7208 Want stac/clac disasm support
7733 Need SHA Instruction dis support
7756 dis can't handle x86 SSE 3 instructions
7757 want avx2 disasm tests
7758 want SSE 4.1 disasm tests
MFC after: 2 weeks
This ioctl has been considered legacy by upstream since the DTrace code
was first imported, and is unused. The removal also allows some
simplification of dtrace_helper_slurp().
Also remove a bogus copyout in the DTRACEHIOC_ADDDOF handler. Due to a
bug, it would overwrite an in-memory copy of the DOF header rather than
the passed-in DOF helper. Moreover, DTRACEHIOC_ADDDOF already copies the
helper back out automatically since its argument has the IOC_OUT attribute.
the fifth argument to functions being traced, however there was an error
where the userspace stack was being used. This may be invalid leading to
a kernel panic if this address is unmapped.
Submitted by: Graeme Jenkinson <graeme.jenkinson@cl.cam.ac.uk>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D9229
These functions may be called in DTrace probe context, so they cannot be
safely traced. Moreover, they are currently only used by DTrace, so their
corresponding FBT probes are not particularly useful.
MFC after: 2 weeks
This restriction was inherited from upstream but is not relevant on FreeBSD.
Furthermore, it hindered the tracing of locking primitive subroutines.
MFC after: 1 week
Otherwise there exists a narrow window during which a syscall probe can be
disabled and cause a concurrently-running thread to call dtrace_probe()
with an invalid probe ID.
Reported by: ngie
MFC after: 1 week
Sponsored by: Dell EMC Isilon
* Use the right incantation to get the next stack pointer. Since powerpc uses
special frames for traps, dereferencing the stack pointer straight up won't
get us the next stack pointer in every case.
* Clear EE using the correct instruction sequence. The PowerISA states that
'andi.' ANDs the register with 0||<imm>, instead of sign extending or filling
out the unavailable bits with 1. Even if it did sign extend, PSL_EE is
0x8000, so ~PSL_EE is 0x7fff, and the upper bits would be cleared. Use rlwinm
in the 32-bit case, and a two-rotate sequence in the 64-bit case, the latter
chosen to follow the output generated by gcc.
MFC after: 1 week
Also reduce the diff between us and upstream: the input data model will
always be DATAMODEL_NATIVE because of a bug (p_model is never set but is
always initialized to 0), so we don't need to override the caller anyway.
This change is also necessary to support the pid provider for 32-bit
processes on amd64.
MFC after: 2 weeks
former return the current status for the latter to use. Without this we
could enable interrupts when they shouldn't be.
It's still not quite right as it should only update the bits we care about,
bit should be good enough until the correct fix can be tested.
PR: 204270
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Currently, Application Processors (non-boot CPUs) are started by
MD code at SI_SUB_CPU, but they are kept waiting in a "pen" until
SI_SUB_SMP at which point they are released to run kernel threads.
SI_SUB_SMP is one of the last SYSINIT levels, so APs don't enter
the scheduler and start running threads until fairly late in the
boot.
This change moves SI_SUB_SMP up to just before software interrupt
threads are created allowing the APs to start executing kernel
threads much sooner (before any devices are probed). This allows
several initialization routines that need to perform initialization
on all CPUs to now perform that initialization in one step rather
than having to defer the AP initialization to a second SYSINIT run
at SI_SUB_SMP. It also permits all CPUs to be available for
handling interrupts before any devices are probed.
This last feature fixes a problem on with interrupt vector exhaustion.
Specifically, in the old model all device interrupts were routed
onto the boot CPU during boot. Later after the APs were released at
SI_SUB_SMP, interrupts were redistributed across all CPUs.
However, several drivers for multiqueue hardware allocate N interrupts
per CPU in the system. In a system with many CPUs, just a few drivers
doing this could exhaust the available pool of interrupt vectors on
the boot CPU as each driver was allocating N * mp_ncpu vectors on the
boot CPU. Now, drivers will allocate interrupts on their desired CPUs
during boot meaning that only N interrupts are allocated from the boot
CPU instead of N * mp_ncpu.
Some other bits of code can also be simplified as smp_started is
now true much earlier and will now always be true for these bits of
code. This removes the need to treat the single-CPU boot environment
as a special case.
As a transition aid, the new behavior is available under a new kernel
option (EARLY_AP_STARTUP). This will allow the option to be turned off
if need be during initial testing. I plan to enable this on x86 by
default in a followup commit in the next few days and to have all
platforms moved over before 11.0. Once the transition is complete,
the option will be removed along with the !EARLY_AP_STARTUP code.
These changes have only been tested on x86. Other platform maintainers
are encouraged to port their architectures over as well. The main
things to check for are any uses of smp_started in MD code that can be
simplified and SI_SUB_SMP SYSINITs in MD code that can be removed in
the EARLY_AP_STARTUP case (e.g. the interrupt shuffling).
PR: kern/199321
Reviewed by: markj, gnn, kib
Sponsored by: Netflix
When this flag is turned on, DOF and DIF validation errors are printed to
the kernel message buffer. This is useful for debugging.
Also remove the debug.dtrace.debug sysctl, which has no effect.
While the instructions were not included into the original instruction
set, their support can be indicated by a special feature bit.
For example:
CPU: AMD Phenom(tm) II X4 955 Processor (3214.71-MHz K8-class CPU)
...
AMD Features2=0x37ff<LAHF, ...>
Clang 3.8 uses lahf/sahf as a faster alternative to pushf/popf where
possible.
MFC after: 2 weeks
Currently this argument is a pointer into the stack which is used by FBT
to fetch the first five probe arguments. On all non-x86 architectures it's
simply the trapframe address, so this change has no functional impact. On
amd64 it's a pointer into the trapframe such that stack[1 .. 5] gives the
first five argument registers, which are deliberately grouped together in
the amd64 trapframe definition.
A trapframe argument simplifies the invop handlers on !x86 and makes the
x86 FBT invop handler easier to understand. Moreover, it allows for invop
handlers that may want to modify the register set of the interrupted thread.
This allows the hrtimer to be used earlier during boot. This is required
for boot-time DTrace: anonymous enablings are created during
SI_SUB_DTRACE_ANON, which runs before APs are started. In particular,
the DTrace deadman timer requires that the hrtimer be functional.
MFC after: 2 weeks
Allow using DTRACE for performance analysis of userspace
applications - the function call stack can be captured.
This is almost an exact copy of AMD64 solution.
Obtained from: Semihalf
Sponsored by: Cavium
Reviewed by: emaste, gnn, jhibbits
Differential Revision: https://reviews.freebsd.org/D5779
- Handle the case where no DOF helper is provided. This occurs with the
currently-unused DTRACEHIOC_ADD ioctl.
- Fix some checks that prevented the loading DOF in the (non-default)
lazyload mode.
need to include it explicitly when <vm/vm_param.h> is already included.
Suggested by: alc
Reviewed by: alc
Differential Revision: https://reviews.freebsd.org/D5379
first instruction to see if it's either a pushm with lr, or a sub with sp.
The former is the common case, with the latter used with va_args.
This removes 12 probes. These are all hand-written assembly, with a few C
functions with no stack usage.
Submitted by: Howard Su <howard0su@gmail.com>
Differential Revision: https://reviews.freebsd.org/D4419
Rather than pushing all eight possible arguments into dtrace_probe()'s
stack frame, make the syscall_args struct for the current syscall available
via the current thread. Using a custom getargval method for the systrace
provider, this allows any syscall argument to be fetched, even in kernels
that have modified the maximum number of system call arguments.
Sponsored by: EMC / Isilon Storage Division
r281257 added support for lazyload mode by allowing dtrace(1) to register
a DOF section on behalf of a traced process. This was implemented by
having libdtrace copy the DOF section into a heap-allocated buffer and
passing its address to the ioctl handler. However, DTrace uses the DOF
section address as a lookup key in certain cases, so the ioctl handler
should be given the target process' DOF section address instead. This
change modifies the ADDDOF handler to copy the DOF section in from the
target process, rather than from dtrace(1).
While here update for armv6 to a tested value.
Submitted by: Howard Su <howard0su@gmail.com>
Reviewed by: stat
Differential Revision: https://reviews.freebsd.org/D4315
Boundary Trace to assembly to reduce the overhead of these checks.
Submitted by: Howard Su <howard0su@gmail.com>
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D4266
stack, take into account the copy of rsi pushed between the breakpoint
trapframe and the dtrace_invop frame. Prior to r287644, this was covered
by the fact that sizeof(struct amd64_frame) was 24 rather than 16.
Reported by: smh
linux_syscallnames[] from linux_* to linux32_* to avoid conflicts with
linux64.ko. While here, add support for linux64 binaries to systrace.
- Update NOPROTO entries in amd64/linux/syscalls.master to match the
main table to fix systrace build.
- Add a special case for union l_semun arguments to the systrace
generation.
- The systrace_linux32 module now only builds the systrace_linux32.ko.
module on amd64.
- Add a new systrace_linux module that builds on both i386 and amd64.
For i386 it builds the existing systrace_linux.ko. For amd64 it
builds a systrace_linux.ko for 64-bit binaries.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D3954
otherwise DTRACE_ANCHORED() returns false and that makes stack()
insert a bogus frame at the top.
For example:
dtrace -n 'test:dtrace_test::sdttest { stack(); }
This change is not really a solution, but just a work-around.
The real solution is to record the probe's call site and to use
that for resolving a function name.
PR: 195222
MFC after: 22 days
since on amd64 the first argument to a function is generally not on the
stack.
Revert an old DTrace bug fix to some code that assumed that
sizeof(struct amd64_frame) == 16.
Reviewed by: jhb, kib
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D3255
in lockstat.ko. This means that lockstat probes now have typed arguments and
will utilize SDT probe hot-patching support when it arrives.
Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D2993
enabled. The cost of a timecounter read can be quite significant, and the
problem became more apparent after r284297, since that change resulted in
a call to lockstat_nsecs() for each acquisition of an rwlock read lock.
PR: 201642
Reviewed by: avg
Tested by: Jason Unovitch
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D3073
belongs to the kernel stack address range for the thread. Right now,
code checks that new frame is not farther then KSTACK_PAGES pages from
the current frame, which allows the address to point past the top of
the stack.
Reviewed by: andrew, emaste, markj
Differential revision: https://reviews.freebsd.org/D3108
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
macros on amd64 and i386. Move the definition to machine/param.h.
kgdb defines INKERNEL() too, the conflict is resolved by renaming kgdb
version to PINKERNEL().
On i386, correct the lowest kernel address. After the shared page was
introduced, USRSTACK no longer points to the last user address + 1 [*]
Submitted by: Oliver Pinter [*]
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
