D26436 introduced support for stacked vlans that changed the way vlans
are configured. In particular, this change broke setups that have
same-number vlans as subinterfaces.
Vlan support was initially created assuming "vlanX" semantics. In this paradigm,
automatic number assignment supported by cloning (ifconfig vlan create) was a
natural fit.
When "ifaceX.Y" support was added, allowing to have the same vlan number on
multiple devices, cloning code became more complex, as the is no
unified "vlan" namespace anymore. Such interfaces got the first spare
index from "vlan" cloner. This, in turn, led to the following problem:
ifconfig ix0.333 create -> index 1
ifconfig ix0.444 create -> index 2
ifconfig vlan2 create -> allocation failure
This change fixes such allocations by using cloning indexes only for
"vlanX" interfaces.
Reviewed by: hselasky
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D27505
Originally IFCAP_NOMAP meant that the mbuf has external storage pointer
that points to unmapped address. Then, this was extended to array of
such pointers. Then, such mbufs were augmented with header/trailer.
Basically, extended mbufs are extended, and set of features is subject
to change. The new name should be generic enough to avoid further
renaming.
- Use libelf to parse ELF data structures and remove code duplication
for ELF32.
- Don't require the OSABI field to be set to the FreeBSD OSABI for
shared libraries. Both AArch64 and RISC-V leave it set to "none"
and instead depend on the ABI tag note. For ldd, this means falling
back to walking the notes in PT_NOTE segments to find the ABI tag
note to determine if an ELF shared library without OSABI set in the
header file is a FreeBSD shared library.
Reviewed by: kib
MFC after: 5 days
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D28342
This eliminates a lot of stat() calls that happen when lualoader renders the
menu with the default settings, and greatly speeds up rendering on my
laptop.
ftype is nil if loader/loader.efi hasn't been updated yet, falling back to
lfs.attributes() to test.
This is technically incompatible with lfs, but not in a particularly
terrible way.
Reviewed-by: cem
MFC-after: 4 days
Differential Revision: https://reviews.freebsd.org/D27542
This reverts commit fcb4797c90.
With `CIRRUS_CLONE_DEPTH` unspecified (using the default of 50) the
time to clone the repo increased from a little under 2 minutes to over
6 minutes, possibly due to additional processing required by GitHub.
We will want to watch out for occasional `Failed to force reset to
SHA: object not found!` errors.
Previously Cirrus was skipped on svn_head to avoid running CI on two
different branches with identical content. With the transition to git
this serves no purpose.
Reported by: kevans
Sponsored by: The FreeBSD Foundation
Which is `50`. I saw a few errors like
`Failed to force reset to SHA: object not found!` which seems is
happening because the SHA is not available because there were two
commits pushed almost simultaneously and the second from the top fails
with this error because the SHA is not in the history.
Pull Request: https://github.com/freebsd/freebsd-src/pull/454
There's a currently ad-hoc protocol to hand off the FreeBSD kernel
payload between the loader and the kernel itself when Xen is in the
middle of the picture. Such protocol wasn't very resilient to changes
to the loader itself, because it relied on moving metadata around to
package it using a certain layout. This has proven to be fragile, so
replace it with a more robust version.
The new protocol requires using a xen_header structure that will be
used to pass data between the FreeBSD loader and the FreeBSD kernel
when booting in dom0 mode. At the moment the only data conveyed is the
offset of the start of the module metadata relative to the start of the
module itself.
This is a slightly disruptive change since it also requires a change
to the kernel which is contained in this patch. In order to update
with this change the kernel must be updated before updating the
loader, as described in the handbook. Note this is only required when
booting a FreeBSD/Xen dom0. This change doesn't affect the normal
FreeBSD boot protocol.
This fixes booting FreeBSD/Xen in dom0 mode after
3630506b9d.
Sponsored by: Citrix Systems R&D
MFC after: 3 days
Reviewed by: tsoome
Differential Revision: https://reviews.freebsd.org/D28411
This follows select by eleminating the use of filedesc lock.
This is a win for single-threaded processes and a mixed bag for others
as at small concurrency it is faster to take the lock instead of
refing/unrefing each file descriptor.
Nonetheless, removal of shared lock usage is a step towards a
mtx-protected fd table.
Since most select users are single-threaded this avoid a lot of work
in the common case.
For example select of 16 fds (ops/s):
before: 2114536
after: 2991010
This can be used by single-threaded processes which don't share a file
descriptor table to access their file objects without having to
reference them.
For example select consumers tend to match the requirement and have
several file descriptors to inspect.
This tests fork()s, so if there is still data in the stdout buffer on fork
it will print it again in the child process. This was happening in the
CheriBSD CI and caused the test to complain about malformed TAP output.
Reviewed By: ngie
Differential Revision: https://reviews.freebsd.org/D28397
It's possible when adding a jail that its dying parent comes back to
life. Only allow that to happen when JAIL_DYING is specified. And if
it does happen, call PR_METHOD_CREATE on it.
vfs_cache_lookup() has already done the appropriate VEXEC check, therefore
we must not re-check in VOP_CACHEDLOOKUP.
This fixes O_SEARCH semantics on tmpfs and removes a redundant descent into
VOP_ACCESS() in the common case.
Reported-by: arichardson (via CheriBSD Jenkins CI)
Reviewed-by: kib
MFC-after: 3 days
Differential Revision: https://reviews.freebsd.org/D28401
The current uname is branch-cXXXX-gHASH
Three changes to make uname more useful.
1. Move from using git rev-list --count to git rev-lis --count --first-parent
since that gives a better, incrementing number.
2. Report this count as 'nXXXXX' rather than 'cXXXXX' because c is part of
a hash and we've changed the sematnics of XXXXX
3. Remove g to make HASH cut and pastable.
Durting review, #1 & #3 had the largest consensus. There was a diversity of
opinion on #2, but on the whole it was positive so I'll acknowledge the dissent,
but move forward with something seems to have support since the dissent was all
about what letter to use where I chose 'n'.
MFC After: 3 days
Reviewed by: rgrimes, emaste (earlier version)
Differential Revision: https://reviews.freebsd.org/D28338
newer controller have a sparce bus space that can be figured
out by probing the HW. This gives the starting bus number.
When reading the PCI config. space behind the VMD controller,
the offset of the starting bus needs to be subtracted from
the bus being read.
Fixed a bug in which in which not all of the devices
directly attached to the VMD controller would be probed.
On my initial test HW, a switch was found at bus 0, slot 0
and function 0. All of the NVME drives were behind that
switch. Now scan for all slots and functions attached to
bus 0. If a something was found then run attach after the
scan. On detach also go through all slots and functions
on bus 0.
Tested with device ID's: 0x201d & 0x9a0b
Tested by: nc@
MFC after: 7 days
PR: 252253
Use hsctrl_load to load the module at boot time.
Submitted by: Shunchao Hu <ankohuu_outlook.com>
Reviewed by: wulf
MFC after: 3 days
Differential revision: https://reviews.freebsd.org/D28343
This is required to make use of KERN_TLS
Reviewed by: jhb
Sponsored by: Ampere Computing
Submitted by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D28405
Move software iSCSI tunables/sysctls into kern.icl.soft subtree.
Replace several hardcoded length constants there with variables.
While there, stretch the limits to better match Linux' open-iscsi
and our own initiator with new MAXPHYS of 1MB. Our CTL target is
also optimized for up to 1MB I/Os, so there is also a match now.
For Windows 10 and VMware 6.7 initiators at default settings it
should make no change, since previous limits were sufficient there.
Tests of QD1 1MB writes from FreeBSD over 10GigE link show throughput
increase by 29% on idle connection and 132% with concurrent QD8 reads.
MFC after: 3 days
Sponsored by: iXsystems, Inc.
It is possible for a buf to be reassigned between the dirty and clean
lists while gbincore_unlocked() looks in each list. Avoid creating
a buffer in that case and fallback to a locked lookup.
This fixes a regression from r363482.
More discussion on potential improvements to the clean and dirty lists
handling is in the review.
Reviewed by: cem, kib, markj, vangyzen, rlibby
Reported by: Suraj.Raju at dell.com
Submitted by: Suraj.Raju at dell.com, cem, [based on both]
MFC after: 2 weeks
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D28375
This merges upstream patches from OpenSSL's master branch to add
KTLS infrastructure for TLS 1.0-1.3 including both RX and TX
offload and SSL_sendfile support on both Linux and FreeBSD.
Note that TLS 1.3 only supports TX offload.
A new WITH/WITHOUT_OPENSSL_KTLS determines if OpenSSL is built with
KTLS support. It defaults to enabled on amd64 and disabled on all
other architectures.
Reviewed by: jkim (earlier version)
Approved by: secteam
Obtained from: OpenSSL (patches from master)
MFC after: 1 week
Relnotes: yes
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D28273
The file already includes sys/param.h and should use that definition.
I found this while testing D28332.
Reviewed By: bapt
Differential Revision: https://reviews.freebsd.org/D28331
This changes the behaviour to a 30s total timeout (needed when running
on slow emulated uniprocessor systems) and timing out after 10s without
any input. This also uses timespecsub() instead of ignoring the
nanoseconds field.
After this change the tests runs more reliably on QEMU and time out less
frequently.
Reviewed By: asomers
Differential Revision: https://reviews.freebsd.org/D28391
SVN r343917 fixed this for in-tree clang, but when building with a newer
out-of-tree clang the test was still marked as XFAIL.
Reviewed By: dim
Differential Revision: https://reviews.freebsd.org/D28390
auditd creates a pidfile so we should use it for status checks.
This also seems to speed up the frequent onestatus checks used in
tests/sys/audit.
Reviewed By: asomers
Differential Revision: https://reviews.freebsd.org/D28389
tree that fix the ratelimit code. There were several bugs
in tcp_ratelimit itself and we needed further work to support
the multiple tag format coming for the joint TLS and Ratelimit dances.
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D28357
This code implements a version of the devres framework found
working for various iwlwifi use cases and also providing functions
for ttm_page_alloc_dma.c from DRM.
Part of the framework replicates the consumed KPI, while others
are internal helper functions.
In addition the simple devm_k*malloc() consumers were implemented
and kvasprintf() was enhanced to also work for the devm_kasprintf()
case.
Addmittingly lkpi_devm_kmalloc_release() could be avoided but for
the overall understanding of the code and possible memory tracing
it may still be helpful.
Further devsres consumer are implemented for iwlwifi but will follow
later as the main reason for this change is to sort out overlap with
DRM.
Sponsored-by: The FreeBSD Foundation
Obtained-from: bz_iwlwifi
MFC After: 3 days
Reviewed-by: hselasky, manu
Differential Revision: https://reviews.freebsd.org/D28189
In pci_domain_nr() directly return the domain which got set in
lkpifill_pci_dev() in all cases. This was missed between D27550
and 105a37cac7 .
In order to implement pci_dev_put() harmonize further code
(which was started in the aforementioned commit) and add kobj
related bits (through the now common lkpifill_pci_dev() code)
to the DRM specific calls without adding the DRM allocated
pci devices to the pci_devices list.
Add a release for the lkpinew_pci_dev() (DRM) case so freeing
will work.
This allows the DRM created devices to use the normal kobj/refcount
logic and work with, e.g., pci_dev_put().
(For a slightly more detailed code walk see the review).
Sponsored-by: The FreeBSD Foundation
Obtained-from: bz_iwlwifi (partially)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D28188
The upcoming in-kernel implementations for LinuxKPI based on work on
iwlwifi (and other wireless drivers) conflicts in a few places with
the drm-kmod graphics work outside the base system.
In order to transition smoothly extract the conflicting bits.
This included "unaligned" accessor functions, sg_pcopy_from_buffer(),
IS_*() macros (to be further restricted in the future), power management
bits (possibly no longer conflicting with DRM), and other minor changes.
Obtained-from: bz_iwlwifi
Sponsored-by: The FreeBSD Foundation
MFC after: 3 days
Reviewed by: kib, hselasky, manu, bdragon (looked at earlier versions)
Differential Revision: https://reviews.freebsd.org/D26598
Implement linux firmware KPI compat code.
This includes: request_firmware() request_firmware_nowait(),
request_firmware_direct(), firmware_request_nowarn(),
and release_firmware().
Given we will try to map requested names from natively ported
or full-linuxkpi-using drivers to a firmware(9) auto-loading
name format (.ko file name and image name matching),
we quieten firmware(9) and print success or failure (unless
the _nowarn() version was called) in the linuxkpi implementation.
At the moment we try up-to 4 different naming combinations,
with path stripped, original name, and requested name with '/'
or '.' replaced.
We do not currently defer loading in the "nowait" case.
Sponsored-by: The FreeBSD Foundation
Sponsored-by: Rubicon Communications, LLC ("Netgate")
(firmware(9) nowarn update from D27413)
MFC after: 3 days
Reviewed by: kib, manu (looked at older versions)
Differential Revision: https://reviews.freebsd.org/D27414
This is a regression issue after the new UAR API was introduced
by f8f5b459d2 .
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
This is all code only run on ARMv4 and ARMv5. Support for these have
been dropped from FreeBSD.
Differential Revision: https://reviews.freebsd.org/D28314
