It was already done 4 lines prior and the value of error didn't change
MFC after: 3 days
Reported by: Coverity
CID: 1011236
Sponsored by: EMC / Isilon Storage Division
Any value of uint16_t will be internally promoted to int so
changing them to an unsigned value doesn't help.
Missing revert value in suj_read().
X-MFC with: r298551
Any value of uint16_t will be internally promoted to int so
changing them to an unsigned value doesn't help.
Make clear we want to use uint32_t for closedisk()
X-MFC with: r298551
This adds the ability to view and configure the STBC parameter for
both transmit and receive.
Whilst here, fix a typo for AMSDU.
TODO:
* manpage update
ic_nchans, from struct:ieee80211req_chaninfo, is an unsigned int.
Use an unsigned index to prevent overflowing the index.
Adopt unsigned integers in other cases where it is useful
to be aware of the unsigned quantities and there is no
risk of the values being negative.
MFC after: 1 week
fs_ncg is of type uint32, and we were indexing it with an int.
Fixed this using an unsigned type and adopt some other unsigned
indexes to remind us when we are dealing with unsigned numbers.
Reviewed by: mckusick
MFC after: 5 days
In Azure, the DHCP servers add private option (id 0xf5), which contains
binary form of an IPv4 address. Once this option is converted to string
form, it could contain '$', e.g.
IPv4 address: 100.72.36.54
binary form: 0x64 0x48 0x24 0x36
string form: "dH$6"
dhclient bails upon "illegal" options like the above example, thus the
VM bring-up will fail.
Also as a side note, this "illegal" option detection was added in
OpenBSD ~11years ago:
http://cvsweb.openbsd.org/cgi-bin/cvsweb/src/sbin/dhclient/dhclient.c?rev=1.50&content-type=text/x-cvsweb-markup
And it was removed along with the removal of script support in OpenBSD
~3years ago:
http://cvsweb.openbsd.org/cgi-bin/cvsweb/src/sbin/dhclient/dhclient.c?rev=1.159&content-type=text/x-cvsweb-markup
Reported by: Hongxiong Xian <v-hoxian microsoft com>
Reviewed by: jhb, Dexuan Cui <decui microsoft com>
Tested by: Hongxiong Xian <v-hoxian microsoft com>
Analyzed by: Dong Liu <doliu microsoft com>
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5853
Also, call endfsent after calling getfsent (i.e. when not explicitly called
with a swap device) for code cleanliness
CID: 1354785
Differential Revision: https://reviews.freebsd.org/D6014
X-MFC with: r298076
Reported by: Coverity
Reviewed by: cem
Sponsored by: EMC / Isilon Storage Division
use it after enabling TRIM.
Reviewed by: brueffer@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5928
(And 4Kn minidump support, but only for amd64.)
Make sure all I/O to the dump device is of the native sector size. To
that end, we keep a native sector sized buffer associated with dump
devices (di->blockbuf) and use it to pad smaller objects as needed (e.g.
kerneldumpheader).
Add dump_write_pad() as a convenience API to dump smaller objects with
zero padding. (Rather than pull in NPM leftpad, we wrote our own.)
Savecore(1) has been updated to deal with these dumps. The format for
512-byte sector dumps should remain backwards compatible.
Minidumps for other architectures are left as an exercise for the
reader.
PR: 194279
Submitted by: ambrisko@
Reviewed by: cem (earlier version), rpokala
Tested by: rpokala (4Kn/512 except 512 fulldump), cem (512 fulldump)
Relnotes: yes
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D5848
It allows implementing loadable kernel modules with new actions and
without needing to modify kernel headers and ipfw(8). The module
registers its action handler and keyword string, that will be used
as action name. Using generic syntax user can add rules with this
action. Also ipfw(8) can be easily modified to extend basic syntax
for external actions, that become a part base system.
Sample modules will coming soon.
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
This is the current behaviour in OpenBSD and a similar patch exist in
pfSense too.
Obtained from: OpenBSD (partly - rev. 1.625)
MFC after: 2 weeks
Sponsored by: Rubicon Communications (Netgate)
In case where the two events were being received in separate reads, the
event buffer was being null-terminated at the wrong offset.
Also, factored out some common code between the tests, and fixed a comment.
Submitted by: will
MFC after: 3 days
Sponsored by: Spectra Logic Corp
in one command due to wrong file size limit. Do not use bootcode size
to calculate partsize limit.
Also add report message about successful partcode writing.
Reported by: Trond Endrestøl
MFC after: 2 weeks
This flag indicates that the user wishes to use the GELIBOOT feature to boot from a fully encrypted root file system.
Currently, GELIBOOT does not support key files, and in the future when it does, they will be loaded differently.
Due to the design of GELI, and the desire for secrecy, the GELI metadata does not know if key files are used or not, it just adds the key material (if any) to the HMAC before the optional passphrase, so there is no way to tell if a GELI partition requires key files or not.
Since the GELIBOOT code in boot2 and the loader does not support keys, they will now only attempt to attach if this flag is set. This will stop GELIBOOT from prompting for passwords to GELIs that it cannot decrypt, disrupting the boot process
PR: 208251
Reviewed by: ed, oshogbo, wblock
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D5867
program without listening to the devd socket for all events. Define
two new pseudo variables $*, the entire event from devctl and $_,
the entire event without the type character, since it might be easier
to use in some circumstances.
Among other things this gives us the ability to find outthe syscall number of a dynamically loaded syscall that has a dynamicly allocated vector number.
MFC after: 1 week
Sponsored by: Panzura inc.
The standards in the QSFP diagnostics area are not clear when the
additional measurements are present or not. Use a valid temperature
reading as an indicator for the presence of voltage and TX/RX power
measurements.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Tested by: Netflix
Differential Revision: https://reviews.freebsd.org/D5391
Reviewed by: gallatin
This displays the IE names in ifconfig but it doesn't yet decode things.
Submitted by: Idwer Vollering <vidwer@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3782
strlcpy(3) null terminates but does not zero-fill the buffer, so would
leave beind any portion of the previous volume label longer than the
new one.
Note that tunefs only allows -L args up to a length of MAXVOLLEN-1, so
the stored label will be null-terminated (whether or not required by
UFS).
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
After calling the cap_init(3) function Casper will fork from it's original
process, using pdfork(2). Forking from a process has a lot of advantages:
1. We have the same cwd as the original process.
2. The same uid, gid and groups.
3. The same MAC labels.
4. The same descriptor table.
5. The same routing table.
6. The same umask.
7. The same cpuset(1).
From now services are also in form of libraries.
We also removed libcapsicum at all and converts existing program using Casper
to new architecture.
Discussed with: pjd, jonathan, ed, drysdale@google.com, emaste
Partially reviewed by: drysdale@google.com, bdrewery
Approved by: pjd (mentor)
Differential Revision: https://reviews.freebsd.org/D4277
These are no longer needed after the recent 'beforebuild: depend' changes
and hooking DIRDEPS_BUILD into a subset of FAST_DEPEND which supports
skipping 'make depend'.
Sponsored by: EMC / Isilon Storage Division
If one does 'ifconfig tap create name blah', it will return error because the
'name' command doesn't properly populate the request sent to ioctl(...). The
'description' command has the same bug, and is also fixed with this patch.
If one does 'ifconfig tap create mtu 9000 name blah', it DOES work, but 'tap0'
(or other sequence number) is echoed, instead of the expected 'blah'. (assuming
the name change actually succeeded)
Submitted by: Marie Helene Kvello-Aune <marieheleneka@gmail.com>
Differential Revision: https://reviews.freebsd.org/D5341
of their individual packages based on MK_foo evaluation.
There is no intent to split inet/inet6 or other similar
combinations for package creation, since they are created
during build time.
Noticed/prodded by: lidl
Sponsored by: The FreeBSD Foundation
The variable isn't actually checked -- just the end result which gets
returned from the function
Differential Revision: https://reviews.freebsd.org/D5156
Reviewed by: araujo, delphij
MFC after: 1 month
Sponsored by: EMC / Isilon Storage Division
embedded structures out of a packed, unaligned struct into local copies
on the stack which are aligned.
The original patch to do this was submitted by Guy Yur <guyyur@gmail.com>,
and this is conceptually the same change, but restructured with the
#ifndef __NO_STRICT_ALIGNMENT wrapper, similar to how the same issue is
handled in the kernel pf code.
PR: 185617
PR: 206658
Some of the structures referenced in power.c (in particular
struct nvme_power_state) are missing from sbin/nvmecontrol/
Pointyhat to: imp
Reported by: Jenkins [*], O. Hartmann <ohartman@zedat.fu-berlin.de>, Outback Dingo <outbackdingo@gmail.com>
The tests will manipulate the system daemon today, which can cause undesired
service interruption when the tests are run.
This change allows the geom_gate tests to be run with an arbitrary ggated(8)
daemon / geom_gate(4) device pairing.
Other changes:
- Sort #includes
- Use a more common idiom for parsing options with getopt(3)
Differential Revision: https://reviews.freebsd.org/D4836
MFC after: 2 weeks
Reviewed by: bjk (manpages), pjd (maintainer timeout)
Sponsored by: EMC / Isilon Storage Division
sent using roundrobin protocol and set a better granularity and distribution
among the interfaces. Tuning the number of packages sent by interface can
increase throughput and reduce unordered packets as well as reduce SACK.
Example of usage:
# ifconfig bge0 up
# ifconfig bge1 up
# ifconfig lagg0 create
# ifconfig lagg0 laggproto roundrobin laggport bge0 laggport bge1 \
192.168.1.1 netmask 255.255.255.0
# ifconfig lagg0 rr_limit 500
Reviewed by: thompsa, glebius, adrian (old patch)
Approved by: bapt (mentor)
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D540
The upcoming GELI support in the loader reuses parts of this code
Some ifdefs are added, and some code is moved outside of existing ifdefs
The HMAC parts of GELI are broken out into their own file, to separate
them from the kernel crypto/openssl dependant parts that are replaced
in the boot code.
Passed the GELI regression suite (tools/regression/geom/eli)
Files=20 Tests=14996
Result: PASS
Reviewed by: pjd, delphij
MFC after: 1 week
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D4699
cperciva's libmd implementation is 5-30% faster
The same was done for SHA256 previously in r263218
cperciva's implementation was lacking SHA-384 which I implemented, validated against OpenSSL and the NIST documentation
Extend sbin/md5 to create sha384(1)
Chase dependancies on sys/crypto/sha2/sha2.{c,h} and replace them with sha512{c.c,.h}
Reviewed by: cperciva, des, delphij
Approved by: secteam, bapt (mentor)
MFC after: 2 weeks
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D3929
sbin/mount.c
Check whether an fstab entry has the same fstype as a mounted
filesystem before declaring it to be mounted. This will allow NFS
filesystems that share a mountpoint with a local filesystem to be
automatically mounted at boot.
This is not such an unusual situation. For example, if somebody uses
the standard installer with a ZFS root, he'll get a /usr/home
filesystem, even though he may choose to mount /usr/home over NFS.
Reviewed by: trasz
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D4556
Add -N flag to reboot(8) which bypasses the userland sync(2) during
reboot(8) while still allow the kernel sync during the reboot(2) syscall
to occur.
An example use of this is when rebooting with disconnected iSCSI sessions
which would otherwise cause the reboot to hang on BIOs that will never
complete.
Reviewed by: bjk
MFC after: 2 weeks
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D4449
it looks, because we'll hit the sockbuf's mbuf limit long before hitting its
data limit. A 256KB data limit allows creating a ZFS pool on about 450
drives without overflowing the client socket buffers.
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D4476
the real build file.
This lessens the need to define DPADD_<lib> and LDADD_<lib> to just very
special cases.
Sponsored by: EMC / Isilon Storage Division
This had no real impact since libipf is a static INTERNALLIB. It does conflict
with an assertion I am adding for LIBADD though.
Sponsored by: EMC / Isilon Storage Division
This is not properly respecting WITHOUT or ARCH dependencies in target/.
Doing so requires a massive effort to rework targets/ to do so. A
better approach will be to either include the SUBDIR Makefiles directly
and map to DIRDEPS or just dynamically lookup the SUBDIR. These lose
the benefit of having a userland/lib, userland/libexec, etc, though and
results in a massive package. The current implementation of targets/ is
very unmaintainable.
Currently rescue/rescue and sys/modules are still not connected.
Sponsored by: EMC / Isilon Storage Division
Unfortunately filemon/meta mode tracks all indirect dependencies here
since ld(1) is reading libelf when linking in libkvm. Churn would be
reduced if this was able to be limited to direct dependencies.
Sponsored by: EMC / Isilon Storage Division
* remove regdomain.[ch] - it's now part of lib80211.
* convert ifieee80211.c to use the ioctl routines in lib80211 and
implement the "error? exit" wrapper behaviour the callers expect.
Right now net80211 is configured as type IBSS but then treats it
as mediatype ADHOC. This doesn't change that; it just correctly handles
being given a mediatype of IBSS.
Return -1 on errors from mkfs_msdos() instead of err()/errx(), to
allow different consumers to handle errors as appropriate.
Obtained from: NetBSD
Sponsored by: The FreeBSD Foundation
The dumpdev kenv supports devices without the /dev/ prefix, fix dumpon to
also support this which is required after r288153.
MFC after: 1 week
Sponsored by: Multiplay
a seek for every block... For large (Exabyte sized files) this would
issue lots of unneeded seeks, so combine them...
Thanks for the work Jan, sorry took so long to commit... And an item
completed off the IdeasPage!
Submitted by: Jan Sucan
the root filesystem without full reboot, using "reboot -r". This can
be used to to eg. boot from a temporary md_image preloaded by loader(8),
setup an iSCSI session, and continue booting from rootfs mounted over
iSCSI.
Reviewed by: kib@, bapt@
MFC after: 1 month
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3693
Make savecore(8) more suitable for init-time scripts; be quiet by default.
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D3229
This is a follow-up to r289845, which only fixed one occurence of CID
1009429.
Coverity CID: 1009429
Reviewed by: markj
MFC after: 2 weeks
X-MFC-With: r289845
Sponsored by: Spectra Logic
Differential Revision: https://reviews.freebsd.org/D4096
Add net.link.lagg.lacp.default_strict_mode which defines
the default value for LACP strict compliance for created
lagg devices.
Also:
* Add lacp_strict option to ifconfig(8).
* Fix lagg(4) creation examples.
* Minor style(9) fix.
MFC after: 1 week
In pfctl_set_debug() we used 'level' without ever initialising it.
We correctly parsed the option, but them failed to actually assign the parsed
value to 'level' before performing to ioctl() to configure the debug level.
PR: 202996
Submitted by: Andrej Kolontai
mode value isn't always clipped to -1 when (resolution * size) == 32, which
would have been the case with values => {4i,32b,32t}.
This seems to have been broken in r64382.
MFC after: 1 week
X-MFC with: r289915
PR: 200619
Reported by: Michael Baptist
Submitted by: Lars Skodje
Sponsored by: EMC / Isilon Storage Division
atapicd(4) has been removed since r249083, and if a system has more than one
optical drive, it will likely be /dev/cd1
Update mount.conf(8) to reflect the change in behavior
MFC after: never
Sponsored by: EMC / Isilon Storage Division
NetBSD split newfs_msdos in two so that they can reuse the file system
creation part in makefs. This change is a step on the path of bringing
that support to FreeBSD.
Reviewed by: kib, pfg
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3905
The current default listen queue for casperd is too small (8) and
hard-coded.
This patch increases the default to SOMAXCONN, and introduces a command
line flag that can used to further increase or decrease the queue length.
PR: bin/202147
Submitted by: <lidl@pix.net>
netbsd-tests.test.mk (r289151)
- Eliminate explicit OBJTOP/SRCTOP setting
- Convert all ad hoc NetBSD test integration over to netbsd-tests.test.mk
- Remove unnecessary TESTSDIR setting
- Use SRCTOP where possible for clarity
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Divison
reads and writes.
PR: kern/198405
Submitted by: Matthew D. Fuller <fullermd at over-yonder dot net>
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3679
This reduces the noise in error reporing from sysctl(8):
Before:
$ sysctl bla=something
sysctl: unknown oid 'bla': No such file or directory
After:
$ sysctl bla=something
sysctl: unknown oid 'bla'
MFC after: 1 week
Sponsored by: Gandi.net
files. Split up all of the targets to be more clear on how they are generated
to fix the problem.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
to shut down; close laptop lid" scenario which otherwise tended to end
with a laptop overheating or the battery dying.
The implementation uses a new sysctl, kern.suspend_blocked; init(8) sets
this while rc.suspend runs, and the ACPI sleep code ignores requests while
the sysctl is set.
Discussed on: freebsd-acpi (35 emails)
MFC after: 1 week
/sbin/route has a bug where if it is passed an interface name that does
not exist, it falls through and winds up interpreting it as a hostname.
It fails out eventually, but on a system where DNS lookup is broken you
can end up waiting for up to 60 seconds waiting for the DNS lookup to
timeout. I'm not quite sure what happens if the DNS lookup somehow
succeeds but I doubt that can end well.
Reviewed by: markj, cem
MFC after: 2 weeks
Sponsored by: EMC/Isilon Storage Division
it possible to "simulate" 4K media, to eg test alignment handling.
Reviewed by: mav@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3664
go asking what debug flags to set for GEOM to make it work. Advice
them to use gpart(8) instead.
Something similar should probably done with disklabel,
but I need to rewrite the disklabel examples first.
Reviewed by: wblock@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3315
The crop/drop-ovl fragment scrub modes are not very useful and likely to confuse
users into making poor choices.
It's also a fairly large amount of complex code, so just remove the support
altogether.
Users who have 'scrub fragment crop|drop-ovl' in their pf configuration will be
implicitly converted to 'scrub fragment reassemble'.
Reviewed by: gnn, eri
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D3466
CoDel is a parameterless queue discipline that handles variable bandwidth
and RTT.
It can be used as the single queue discipline on an interface or as a sub
discipline of existing queue disciplines such as PRIQ, CBQ, HFSC, FAIRQ.
Differential Revision: https://reviews.freebsd.org/D3272
Reviewd by: rpaulo, gnn (previous version)
Obtained from: pfSense
Sponsored by: Rubicon Communications (Netgate)
The significant changes and bugs fixed here are:
1. Fixed a bug in the progress display code:
When the user's filename is too big, or his terminal width is too
small, the progress code could wind up using a negative number for
the length of the "stars" that it uses to indicate progress.
This negative value was assigned to an unsigned variable, resulting
in a very large positive value.
The result is that we wound up writing garbage from memory to the
user's terminal.
With an 80 column terminal, a file name length of more than 35
characters would generate this problem.
To address this, we now set a minimum progress bar length, and
truncate the user's file name as needed.
This has been tested with large filenames and small terminals, and
at least produces reasonable results. If the terminal is too
narrow, the progress display takes up an additional line with each
update, but this is more user friendly than writing garbage to the
tty.
2. SATA drives connected via a SATA controller didn't have SCSI Inquiry
data populated in struct cam_device. This meant that the code in
fw_get_vendor() in fwdownload.c would try to match a zero-length
vendor ID, and so return the first entry in the vendor table. (Which
used to be HITACHI.) Fixed by grabbing identify data, passing the
identify buffer into fw_get_vendor(), and matching against the model
name.
3. SATA drives connected via a SAS controller do have Inquiry data
populated. The table included a couple of entries -- "ATA ST" and
"ATA HDS", intended to handle Seagate and Hitachi SATA drives attached
via a SAS controller. SCSI to ATA translation layers use a vendor
ID of "ATA" (which is standard), and then the model name from the ATA
identify data as the SCSI product name when they are returning data on
SATA disks. The cam_strmatch code will match the first part of the
string (because the length it is given is the length of the vendor,
"ATA"), and return 0 (i.e. a match). So all SATA drives attached to
a SAS controller would be programmed using the Seagate method
(WRITE BUFFER mode 7) of SCSI firmware downloading.
4. Issue #2 above covered up a bug in fw_download_img() -- if the
maximum packet size in the vendor table was 0, it tried to default
to a packet size of 32K. But then it didn't actually succeed in
doing that, because it set the packet size to the value that was
in the vendor table (0). Now that we actually have ATA attached
drives fall use the VENDOR_ATA case, we need a reasonable default
packet size. So this is fixed to properly set the default packet size.
5. Add support for downloading firmware to IBM LTO drives, and add a
firmware file validation method to make sure that the firmware
file matches the drive type. IBM tape drives include a Load ID and
RU name in their vendor-specific VPD page 0x3. Those should match
the IDs in the header of the firmware file to insure that the
proper firmware file is loaded.
6. This also adds a new -q option to the camcontrol fwdownload
subcommand to suppress informational output. When -q is used in
combination with -y, the firmware upgrade will happen without
prompting and without output except if an error condition occurs.
7. Re-add support for printing out SCSI inquiry information when
asking the user to confirm that they want to download firmware, and
add printing of ATA Identify data if it is a SATA disk. This was
removed in r237281 when support for flashing ATA disks was added.
8. Add a new camcontrol(8) "opcodes" subcommand, and use the
underlying code to get recommended timeout values for drive
firmware downloads.
Many SCSI devices support the REPORT SUPPORTED OPERATION CODES
command, and some support the optional timeout descriptor that
specifies nominal and recommended timeouts for the commands
supported by the device.
The new camcontrol opcodes subcommand allows displaying all
opcodes supported by a drive, information about which fields
in a SCSI CDB are actually used by a given SCSI device, and the
nominal and recommended timeout values for each command.
Since firmware downloads can take a long time in some devices, and
the time varies greatly between different types of devices, take
advantage of the infrastructure used by the camcontrol opcodes
subcommand to determine the best timeout to use for the WRITE
BUFFER command in SCSI device firmware downloads.
If the device recommends a timeout, it is likely to be more
accurate than the default 50 second timeout used by the firmware
download code. If the user specifies a timeout, it will override
the default or device recommended timeout. If the device doesn't
support timeout descriptors, we fall back to the default.
9. Instead of downloading firmware to SATA drives behind a SAS controller
using WRITE BUFFER, use the SCSI ATA PASS-THROUGH command to compose
an ATA DOWNLOAD MICROCODE command and it to the drive. The previous
version of this code attempted to send a SCSI WRITE BUFFER command to
SATA drives behind a SAS controller. Although that is part of the
SAT-3 spec, it doesn't work with the parameters used with LSI
controllers at least.
10.Add a new mechanism for making common ATA passthrough and
ATA-behind-SCSI passthrough commands.
The existing camcontrol(8) ATA command mechanism checks the device
type on every command executed. That works fine for individual
commands, but is cumbersome for things like a firmware download
that send a number of commands.
The fwdownload code detects the device type up front, and then
sends the appropriate commands.
11.In simulation mode (-s), if the user specifies the -v flag, print out
the SCSI CDB or ATA registers that would be sent to the drive. This will
aid in debugging any firmware download issues.
sbin/camcontrol/fwdownload.c:
Add a device type to the fw_vendor structure, so that we can
specify different download methods for different devices from the
same vendor. In this case, IBM hard drives (from when they
still made hard drives) and tape drives.
Add a tur_status field to the fw_vendor structure so that we can
specify whether the drive to be upgraded should be ready, not
ready, or whether it doesn't matter. Add the corresponding
capability in fw_download_img().
Add comments describing each of the vendor table fields.
Add HGST and SmrtStor to the supported SCSI vendors list.
In fw_get_vendor(), look at ATA identify data if we have a SATA
device to try to identify what the drive vendor is.
Add IBM firmware file validation. This gets VPD page 0x3, and
compares the Load ID and RU name in the page to the values
included in the header. The validation code will refuse to load
a firmware file if the values don't match. This does allow the
user to attempt a downgrade; whether or not it succeeds will
likely depend on the drive settings.
Add a -q option, and disable all informative output
(progress bars, etc.) when this is enabled.
Re-add the inquiry in the confirmation dialog so the user has
a better idea of which device he is talking to. Add support for
displaying ATA identify data.
Don't automatically disable confirmation in simulation (-s) mode.
This allows the user to see the inquiry or identify data in the
dialog, and see exactly what they would see when the command
actually runs. Also, in simulation mode, if the user specifies
the -v flag, print out the SCSI CDB or ATA registers that would
be sent to the drive. This will aid in debugging any firmware
download issues.
Add a timeout field and timeout type to the firmware download
vendor table. This allows specifying a default timeout and allows
specifying whether we should attempt to probe for a recommended
timeout from the drive.
Add a new fuction, fw_get_timeout(), that will determine
which timeout to use for the WRITE BUFFER command. If the
user specifies a timeout, we always use that. Otherwise,
we will use the drive recommended timeout, if available,
and fall back to the default when a drive recommended
timeout isn't available.
When we prompt the user, tell him what timeout we're going
to use, and the source of the timeout.
Revamp the way SATA devices are handled.
In fwdownload(), use the new get_device_type() function to
determine what kind of device we're talking to.
Allow firmware downloads to any SATA device, but restrict
SCSI downloads to known devices. (The latter is not a
change in behavior.)
Break out the "ready" check from fw_download_img() into a
new subfunction, fw_check_device_ready(). This sends the
appropriate command to the device in question -- a TEST
UNIT READY or an IDENTIFY. The IDENTIFY for SATA devices
a SAT layer is done using the SCSI ATA PASS-THROUGH
command.
Use the new build_ata_cmd() function to build either a SCSI or
ATA I/O CCB to issue the DOWNLOAD MICROCODE command to SATA
devices. build_ata_cmd() figures looks at the devtype argument
and fills in the correct CCB type and CDB or ATA registers.
Revamp the vendor table to remove the previous
vendor-specific ATA entries and use a generic ATA vendor
placeholder. We currently use the same method for all ATA
drives, although we may have to add vendor-specific
behavior once we test this with more drives.
sbin/camcontrol/progress.c:
In progress_draw(), make barlength a signed value so that
we can easily detect a negative value.
If barlength (the length of the progress bar) would wind up
negative due to a small TTY width or a large filename,
set the bar length to the new minimum (10 stars) and
truncate the user's filename. We will truncate it down to
0 characters if necessary.
Calculate a new prefix_len variable (user's filename length)
and use it as the precision when printing the filename.
sbin/camcontrol/camcontrol.c:
Implement a new camcontrol(8) subcommand, "opcodes". The
opcodes subcommand allows displaying the entire list of
SCSI commands supported by a device, or details on an
individual command. In either case, it can display
nominal and recommended timeout values.
Add the scsiopcodes() function, which calls the new
scsigetopcodes() function to fetch opcode data from a
drive.
Add two new functions, scsiprintoneopcode() and
scsiprintopcodes(), which print information about one
opcode or all opcodes, respectively.
Remove the get_disk_type() function. It is no longer used.
Add a new function, dev_has_vpd_page(), that fetches the
supported INQUIRY VPD list from a device and tells the
caller whether the requested VPD page is available.
Add a new function, get_device_type(), that returns a more
precise device type than the old get_disk_type() function.
The get_disk_type() function only distinguished between
SCSI and ATA devices, and SATA devices behind a SCSI to ATA
translation layer were considered to be "SCSI".
get_device_type() offers a third type, CC_DT_ATA_BEHIND_SCSI.
We need to know this to know whether to attempt to send ATA
passthrough commands. If the device has the ATA
Information VPD page (0x89), then it is an ATA device
behind a SCSI to ATA translation layer.
Remove the type argument from the fwdownload() subcommand.
Add a new function, build_ata_cmd(), that will take one set
of common arguments and build either a SCSI or ATA I/O CCB,
depending on the device type passed in.
sbin/camcontrol/camcontrol.h:
Add a prototype for scsigetopcodes().
Add a new enumeration, camcontrol_devtype.
Add prototypes for dev_has_vpd_page(), get_device_type()
and build_ata_cmd().
Remove the type argument from the fwdownload() subcommand.
sbin/camcontrol/camcontrol.8
Explain that the fwdownload subcommand will use the drive
recommended timeout if available, and that the user can
override the timeout.
Document the new opcodes subcommand.
Explain that we will attempt to download firmware to any
SATA device.
Document supported SCSI vendors, and models tested if known.
Explain the commands used to download firmware for the
three different drive and controller combinations.
Document that the -v flag in simulation mode for the fwdownload
subcommand will print out the SCSI CDBs or ATA registers that would
be used.
sys/cam/scsi/scsi_all.h:
Add new bit definitions for the one opcode descriptor for
the REPORT SUPPORTED OPCODES command.
Add a function prototype for scsi_report_supported_opcodes().
sys/cam/scsi/scsi_all.c:
Add a new CDB building function, scsi_report_supported_opcodes().
Sponsored by: Spectra Logic
MFC after: 1 week
GELI is used on a SSD or inside virtual machine, so that guest can tell
host that it is no longer using some of the storage.
Enabling BIO_DELETE passthru comes with a small security consequence - an
attacker can tell how much space is being really used on encrypted device and
has less data no analyse then. This is why the -T option can be given to the
init subcommand to turn off this behaviour and -t/T options for the configure
subcommand can be used to adjust this setting later.
PR: 198863
Submitted by: Matthew D. Fuller fullermd at over-yonder dot net
This commit also includes a fix from Fabian Keil freebsd-listen at
fabiankeil.de for 'configure' on onetime providers which is not strictly
related, but is entangled in the same code, so would cause conflicts if
separated out.
section. This removes stuff that doesn't really belong there,
and simplifies examples for the basic operations.
Reviewed by: wblock@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3198
'struct g_gate_ctl_create' fields.
While the behaviour was technically undefined on other architectures
as well, on the reporter's amd64 systems the uninitialized bytes the
kernel cares about were always zero so everything worked as expected.
PR: 197309, 199559
Submitted by: ota@j.email.ne.jp, Fabian Keil
Reviewed by: pjd
MFC after: 1 week
(trying to) report the problem to the client.
sendfail() is called with an already closed socket and thus it
fails to inform the client about the problem.
Fix this by calling sendfail() before connection_remove().
PR: 195944
Submitted by: Fabian Keil
Reviewed by: pjd
MFC after: 1 week
to be negotiated, it could be a Kerberized mount. As such, filling
in the "principal" argument using the canonized host name makes sense.
If it is negotiated as AUTH_SYS, the "principal" argument is meaningless
but harmless.
Requested by: masato@itc.naist.jp
Tested by: masato@itc.naist.jp
PR: 201073
MFC after: 1 month
Update setkey and libipsec to understand aes-gcm-16 as an
encryption method.
A partial commit of the work in review D2936.
Submitted by: eri
Reviewed by: jmg
MFC after: 2 weeks
Sponsored by: Rubicon Communications (Netgate)
