This dramatically pushing 99.9% interpolations and quantizations
error _below_ -180dB on 32bit dynamic range, resulting extremely
high quality conversion.
- Use BSPLINE interpolator for filter oversampling factor greater or
equal than 64 (log2 6).
Approved by: re (kib)
page_list using the matching malloc type for the allocation.
Approved by: re
Reviewed by: scottl [1]
MFC after: 1 week
[1] Original patch was against xpt_cam.c, prior to the cam refactoring.
o add missing Status and Reason codes
o parse/display Action frames
o parse/display Mesh data frames
o parse/display BA frames
Reviewed by: rpaulo
Approved by: re (kib)
check missed this because cxgb's TOM is currently commented out of the build
system.
Submitted by: Navdeep Parhar <np at FreeBSD dot org>
Approved by: re (kensmith), kensmith (mentor temporarily unavailable)
system for configuring machine-dependent memory attributes: ..."). In
r195649, the "vm_cache_mode_t/vm_memattr_t" parameter was removed from
vm_phys_alloc_contig().
Approved by: re (kensmith)
which is currently not protected by any type of lock. When triggered, the bug
would sometimes cause a panic when the TCP activity to an affected machine
eventually slowed during a lull. The panic only occurs if INVARIANTS is compiled
into the kernel, and has laid dormant for some time as a result of INVARIANTS
being off by default except in FreeBSD-CURRENT.
Switch to atomic operations in the locations where the variable is changed.
Reads have not been updated to be protected by atomics, so there is a
possibility of accounting errors in any given calculation where the variable is
read. This is considered unlikely to occur in the wild, and will not cause
serious harm on rare occasions where it does.
Thanks to Robert Watson for debugging help.
Reported by: Kamigishi Rei <spambox at haruhiism dot net>
Tested by: Kamigishi Rei <spambox at haruhiism dot net>
Reviewed by: silby
Approved by: re (rwatson), kensmith (mentor temporarily unavailable)
the TCP syncache. This returns struct tcpopt to being private within the TCP
implementation, thus allowing it to be modified without ABI concerns.
The patch breaks the ABI. Bump __FreeBSD_version to 800103 accordingly. The cxgb
driver is the only TOE consumer affected by this change, and needs to be
recompiled along with the kernel.
Suggested by: rwatson
Reviewed by: rwatson, kmacy
Approved by: re (kensmith), kensmith (mentor temporarily unavailable)
2) Point people at the pool website and encourage
people to provide a server in the pool (as a
courtesy to the pool guys).
3) Fix a spelling.
4) Comment out the local clock and include a link
to documentation for use of the local clock on
the ntp.org site.
Approved by: re (kib)
dependent memory attributes:
Rename vm_cache_mode_t to vm_memattr_t. The new name reflects the
fact that there are machine-dependent memory attributes that have
nothing to do with controlling the cache's behavior.
Introduce vm_object_set_memattr() for setting the default memory
attributes that will be given to an object's pages.
Introduce and use pmap_page_{get,set}_memattr() for getting and
setting a page's machine-dependent memory attributes. Add full
support for these functions on amd64 and i386 and stubs for them on
the other architectures. The function pmap_page_set_memattr() is also
responsible for any other machine-dependent aspects of changing a
page's memory attributes, such as flushing the cache or updating the
direct map. The uses include kmem_alloc_contig(), vm_page_alloc(),
and the device pager:
kmem_alloc_contig() can now be used to allocate kernel memory with
non-default memory attributes on amd64 and i386.
vm_page_alloc() and the device pager will set the memory attributes
for the real or fictitious page according to the object's default
memory attributes.
Update the various pmap functions on amd64 and i386 that map pages to
incorporate each page's memory attributes in the mapping.
Notes: (1) Inherent to this design are safety features that prevent
the specification of inconsistent memory attributes by different
mappings on amd64 and i386. In addition, the device pager provides a
warning when a device driver creates a fictitious page with memory
attributes that are inconsistent with the real page that the
fictitious page is an alias for. (2) Storing the machine-dependent
memory attributes for amd64 and i386 as a dedicated "int" in "struct
md_page" represents a compromise between space efficiency and the ease
of MFCing these changes to RELENG_7.
In collaboration with: jhb
Approved by: re (kib)
to a non loopback/ppp link type) through the loopback interface. Prior
to the new L2/L3 rewrite, this host route was explicitly created when
processing the IPv6 address assignment. This loopback host route is
deleted when that IPv6 address is removed from the interface.
Reviewed by: bz, gnn
Approved by: re
USB CORE: busdma improvement
For single segment allocations the boundary field
of the BUSDMA tag should be zero. Currently all
single segment allocations are less than or equal
to 4096 bytes, so the limit does not kick in. If
any single segment USB allocations would be greater
than 4K, then it would be a problem.
Approved by: re (kensmith)
Obtained from: HPS
Right now nmemb is returned when size is 0. In newer versions of the
standards, it is explicitly required that fwrite() should return 0.
Submitted by: Christoph Mallon
Approved by: re (kib)
non-readable and non-executable map entry, the entry is skipped from
wiring and loop is aborted. But, since MAP_ENTRY_WIRE_SKIPPED was not
set for the map entry, its wired_count is later erronously decremented.
vm_map_delete(9) for such map entry stuck in "vmmaps".
Properly set MAP_ENTRY_WIRE_SKIPPED when aborting the loop.
Reported by: John Marshall <john.marshall riverwillow com au>
Approved by: re (kensmith)
back to the 8 branch:
tcp_var.h
- struct sackhint
- struct tcpcb
- struct tcpstat
The patch breaks the ABI. Bump __FreeBSD_version to 800102 accordingly. User
space tools that rely on the size of any of these structs (e.g. sockstat) need
to be recompiled.
Reviewed by: rpaulo, sam, andre, rwatson
Approved by: re & mentor (gnn)
1. USB_VERBOSE is more consistent with USB_DEBUG,
2. sys/dev/usb/usb_device.c uses option USB_VERBOSE and
not USBVERBOSE.
POLA with the USBVERBOSE option as it's found in 7-STABLE
has been considered but found insignificant in the face
of the USB stack overhaul.
Approved by: re (kensmith)
bandaid to prevent exhaustion of the primary and secondary hash groups
in the event of extreme stress on the PMAP layer (e.g. a forkbomb). This
wastes memory, and should be revised to properly handle PTEG spills instead.
Suggested by: grehan
Approved by: re (kensmith)
The D-cache flushing added here was to deal with I-cache
incoherency observed on ia64. However, the problem was
in the implementation of pmap_enter_object() for ia64:
it was missing I-cache coherency logic for prefaulted
pages. After this got added in rev 195625, testing showed
that no D-cache flushing was required.
The SIGILL that was observed on Book-E (see commit log
for rev 192323) ended up not being related to I-cache
incoherency, but was found to be caused by bad memory.
This discovery further undermined the need for D-cache
flushing in the NFS I/O code, triggering the reversal.
Approved by: re (kensmith)
The programmer was aware that alignment was not guaranteed in the
packed structure and used bzero() to NULL out the pointers.
However, on ia64, the compiler is quite agressive in finding ILP
and calls to bzero() are often replaced by simple assignments (i.e.
stores). Especially when the width or size in question corresponds
with a store instruction (i.e. st1, st2, st4 or st8).
The problem here is not a compiler bug. The address of the memory
to zero-out was given by '&packed->nvl_priv' and given the type of
the 'packed' pointer the compiler could assume proper alignment for
the replacement of bzero() with an 8-byte wide store to be valid.
The problem is with the programmer. The programmer knew that the
address did not have the alignment guarantees needed for a regular
assignment, but failed to inform the compiler of that fact. In
fact, the programmer told the compiler the opposite: alignment is
guaranteed.
The fix is to avoid using a pointer of type "nvlist_t *" and
instead use a "char *" pointer as the basis for calculating the
address. This tells the compiler that only 1-byte alignment can
be assumed and the compiler will either keep the bzero() call
or instead replace it with a sequence of byte-wise stores. Both
are valid.
Approved by: re (kib)
/boot/kernel/hptrr.ko
/etc/mail/*.cf
/lib/libcrypto.so.5
/usr/bin/ntpq
/usr/sbin/amd
/usr/sbin/iasl
/usr/sbin/ntpd
/usr/sbin/ntpdate
/usr/sbin/ntpdc
There does not appear to be any purpose to having these timestamps, and
they have the irritating consequence that the aforementioned files will
be different every time they are rebuilt.
After this commit, the only remaining build timestamps are in the kernel,
the boot loaders, /usr/include/osreldate.h (the year in the copyright
notice), and lib*.a (the timestamps on all of the included .o files).
Reviewed by: scottl (hptrr), gshapiro (sendmail), simon (openssl),
roberto (ntp), jkim (acpica)
Approved by: re (kib)
called to prefault pages. This is an obvious place for making
sure the I-cache is coherent. It was missing though. As such,
execution over NFS and ZFS file systems was failing. NFS was
fixed the wrong way (by flushing the D-cache as part of the
NFS code) in a previous commit. ZFS problems were encountered
after that and indicated that something else was wrong...
Approved by: re (kib)
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
The default (64K) is too pessimistic for "new comm" hardware.
Also, this is bad because multiple controllers get limited by
the global tunable.
Reviewed by: scottl
Approved by: re (kensmith)
